Chemical engineering applications of electrical process tomography

Sensors and Actuators, B: Chemical

Volumn 92, Issue 1-2, 2003, Pages 17-24

  Tapp, Henri S ^a   Peyton, A J ^b   Kemsley, E Kate ^a   Wilson, Reg H ^a  

^a INSTITUTE OF FOOD RESEARCH   (United Kingdom)

^b LANCASTER UNIVERSITY   (United Kingdom)

Author keywords

Chemical applications; Electrical tomography; Imaging; Low cost; Review

Indexed keywords

BUBBLE COLUMNS; CHEMICAL ENGINEERING; DATA PROCESSING; EXTRUSION; IMAGING TECHNIQUES; POLYMERIZATION;

EMERGENCY DEPRESSURIZATION;

TOMOGRAPHY;

EID: 0038587546     PISSN: 09254005     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0925-4005(03)00126-6     Document Type: Article

References (52)

1. Tapp H.S., Wilson R.H. Developments in low-cost electrical imaging techniques. Process. Contr. Qual. 9:1997;7-16.
2. York T. Status of electrical tomography in industrial applications. J. Electron. Imaging. 10:2001;608-619.
3. Reinecke N., Mewes D. Recent developments and industrial/research applications of capacitance tomography. Meas. Sci. Technol. 7:1996;233-246.
4. Hjertaker B.T. Static characterization of a dual sensor flow imaging system. Flow Meas. Instrum. 9:1998;183-191.
5. R.B. Schüller, M. Halleraker, B. Engebretsen, Advanced profile gauge for multiphase systems, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 126-132.
6. R.B. Schüller, T. Solbakken, B. Engebretsen, M. Halleraker, Water concentrations and interface positions by single electrode capacitance probes (SeCaP™), in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 644-651.
7. A.J. Jaworski, T. Dyakowski, G.A. Davies, A portable capacitance probe for detection of interface levels in multi-phase flows - a case study, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 289-296.
8. D. Pacho, G. Davies, Application of electrical capacitance measurements to study the collapse of oil foams, in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 618-627.
9. Dickin F., Wang M. Electrical resistance tomography for process applications. Meas. Sci. Technol. 7:1996;247-260.
10. Lionheart W.R.B., Kaipio J., McLeod C.N. Generalized optimal current patterns and electrical safety in EIT. Physiol. Meas. 22:2001;85-90.
11. P.A.T. Pinheiro, W.W. Loh, R.C. Waterfall, Developments of 3-D reconstruction algorithms for ERT, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 563-569.
12. E. Hervieu, P. Seleghim Jr., Direct imaging of two-phase flows by electrical impedance measurements, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 62-70.
13. D. Schmitz, D. Mewes, Tomographic imaging of the void distribution in bubble columns during blowdown, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 297-304.
14. M. Wang, W. Yin, A high adaptive electrical impedance sensing system for flow measurement, in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 486-492.
15. W.W. Loh, R.C. Waterfall, J. Cory, G.P. Lucas, Using ERT for multi-phase flow monitoring, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 47-53.
16. G.T. Bolton, U. Sharif, Process tomography for contamination detection in liquid foods: a feasibility study, in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 719-725.
17. Kotre C.J. EIT image reconstruction using sensitivity weighted filtered backprojection. Phys. Meas. A. 15:1994;125-136.
18. W.R.B. Lionheart, Reconstruction algorithms for permittivity and conductivity imaging, in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 4-11.
19. Yorkey T.J., Webster J.G., Tompkins W. Comparing reconstruction algorithms for electrical-impedance tomography. IEEE J. Bio-Med. Eng. 34:1987;843-852.
20. M. Molinari, S.J. Cox, B.H. Blott, G.J. Daniell, Efficient non-linear 3D electrical tomography reconstruction, in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 424-432.
21. W.R.B. Lionheart, S.R. Arridge, M. Schweiger, M. Vauhkonen, J.P. Kaipio, Electrical impedance and diffuse optical tomography reconstruction software, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 474-478.
22. Tapp H.S., Kemsley E.K., Wilson R.H., Holley M.L. Image improvement in soft-field tomography through the use of chemometrics. Meas. Sci. Technol. 9:1998;592-598.
23. A.R. Bidin, R.G. Green, M.E. Shackleton, R.W. Taylor, Initial report on neural networks for use with electrical charge tomography, in: M.S. Beck et al. (Eds.), Process Tomography - 1994. A Strategy for Industrial Exploitation, UMIST Publications, Manchester, 1994, pp. 203-214.
24. T.D. Sun, R. Mudde, J.C. Schouten, B. Scarlett, C.M. van den Bleek, Image reconstruction of an electrical capacitance tomography system using an artificial neural network, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 174-180.
25. J. Mohamad-Saleh, B.S. Hoyle, F.J.W. Podd, D.M. Spink, Direct flow process estimations from tomographic data using artificial neural systems, in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 751-758.
26. X. Jia, R.A. Willliams, F.J. Dickin, S.L. McKee, Development of a PC-based electrical resistance tomography visualisation data bank for design of slurry mixers, in: M.S. Beck et al. (Eds.), Process Tomography - 1995. Implementation for Industrial Processes, UMIST Publications, Manchester, 1995, pp. 371-380.
27. M. Wang, A. Dorward, D. Vlaev, R. Mann, Measurements of gas-liquid mixing in a stirred vessel using electrical resistance tomography (ERT), in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 78-83.
28. K. Salem, K. Kling, R. Mann, Application of electrical resistance tomography (ERT) to monitor a flow - follower in a stirred vessel, in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 159-167.
29. Heikkinen L.M., Vauhkonen M., Savolainen T., Kaipio J.P. Modelling of internal structures and electrodes in electrical process tomography. Meas. Sci. Technol. 12:2001;1012-1019.
30. M. Wang, W. Yin, Measurement of the angular velocity distribution in miscible liquid mixing using electrical resistance tomography, in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 146-150.
31. R.M. West, X. Jia, R.A. Williams, Parametric modelling in industrial process tomography, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 444-450.
32. R.A. Williams, T. Dyakowski, C.G. Xie, S.P. Luke, P.J. Gregory, R.B. Edwards, F.J. Dickin, L.F. Gate, Industrial measurement and control of particulate processes using electrical tomography, in: M.S. Beck et al. (Eds.), Process Tomography - 1995. Implementation for Industrial Processes, UMIST Publications, Manchester, 1995, pp. 3-15.
33. M.A. Bennett, S.P. Luke, X. Jia, R.M. West, R.A. Williams, Analysis and flow regime identification of bubble column dynamics, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 54-61.
34. West R.M., Tapp H.S., Spink D.M., Bennett M.A., Williams R.A. Application-specific optimisation of regularization for electrical impedance tomography. Meas. Sci. Technol. 12:2001;1050-1054.
35. Deng X., Dong F., Xu L.J., Liu X.P., Xu L.A. The design of a dual-plane ERT system for cross correlation measurement of bubbly gas/liquid pipe flow. Meas. Sci. Technol. 12:2001;1024-1031.
36. J.J. Cilliers, M. Wang, S.J. Neethling, Measuring flowing foam density distributions using ERT, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 108-112.
37. E.L. Yuen, R. Mann, T.A. York, B.D. Grieve, Electrical resistance tomography (ERT) imaging of a metal-walled solid-liquid filter, in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 183-190.
38. D.S. Vlaev, M. Wang, T. Dyakowski, R. Mann, B.D. Grieve, Detecting filter-cake pathologies in solid-liquid filtration: semi-tech scale demonstrations using electrical resistance tomography (ERT), in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 120-125.
39. R.B. White, K. Simic, P.R. Strode, The combined use of flow visualisation, electrical resistance tomography and computational fluid dynamics modelling to study mixing in a pipe, in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 610-617.
40. K. Brodowicz, L. Maryniak, T. Dyakowski, Application of capacitance tomography to pneumatic conveying processes, in: M.S. Beck et al. (Eds.), Tomographic Techniques for Process Design and Operation, Computational Mechanics Publications, Southampton and Boston, 1993, pp. 361-368.
41. A. Arko, R.C. Waterfall, M.S. Beck, T. Dyakowski, P. Sutcliffe, M. Byars, Development of electrical capacitance tomography for solids mass flow measurement and control of pneumatic conveying systems, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 140-146.
42. Jaworski A.J., Dyakowski T. Application of electrical capacitance tomography for measurement of gas-solids flow characteristics in a pneumatic conveying system. Meas. Sci. Technol. 12:2001;1109-1119.
43. R.A. Williams, S.P. Luke, K.L. Ostrowski, M.A. Bennett, Measurement of bulk particulates on belt conveyor using dielectric tomography, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 153-160.
44. R.M. West, Y. Wu, D.M. Scott, G. Sunshine, B.S. Hoyle, J. Kostuch, C.N. McLeod, R.A. Williams, Electrical impedance imaging of paste during extrusion, in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 300-306.
45. Griffiths H., Tucker M.G., Sage J., Herrenden Harker W.G. An electrical impedance tomography microscope. Physiol. Meas. 17(S4A):1996;A15-A24.
46. T. Dyakowski, M. Mikos, D. Vlaev, R. Mann, G.W. Follows, A. Boxman, M.P.W. Wilson, Imaging nylon polymerisation processes by applying electrical tomography, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 383-387.
47. N. Reinecke, C.G. Xie, D. Mewes, M.S. Beck, Application of capacitance tomography for the two-dimensional imaging of pulse flow in trickle-bed reactors, in: M.S. Beck et al. (Eds.), Process Tomography - 1995. Implementation for Industrial Processes, UMIST Publications, Manchester, 1995, pp. 71-83.
48. R.B. White, A. Zakhari, Internal structures in fluid beds of different scales: an application of electrical capacitance tomography, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 39-46.
49. Liu S., Yang W.Q., Wang H., Jiang F., Su Y. Investigation of square fluidised beds using capacitance tomography: preliminary results. Meas. Sci. Technol. 12:2001;1120-1125.
50. Y.T. Makkawi, P.C. Wright, Application of process tomography as a tool for better understanding of fluidization quality in a conventional fluidized bed, in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 324-338.
51. D.M. Scott, O.W. Gutsche, ECT studies of bead fluidization in vertical mills, in: Proceedings of the First World Congress on Industrial Process Tomography, Buxton, UK, 14-17 April 1999, pp. 90-95.
52. Y.Y. Hou, M. Wang, R. Holt, R.A. Williams, A study of the mixing characteristics of a liquid magnetically stabilised fluidised bed using electrical resistance tomography, in: Proceedings of the Second World Congress on Industrial Process Tomography, Hannover, Germany, 29-31 August 2001, pp. 315-323.