Bond parameters to improve tensile load bearing capacities of co-cured single and double lap joints with steel and carbon fiber-epoxy composite adherends

Journal of Composite Materials

Volumn 37, Issue 5, 2003, Pages 401-420

  Shin, Kum Cheol ^a   Lee, Jung Ju ^a  

^a Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

Author keywords

Co cured lap joint; Manufacturing pressure; Stacking sequence; Surface roughness; Tensile load bearing capacity

Indexed keywords

ADHESIVE JOINTS; BEARING CAPACITY; CARBON FIBERS; CURING; EPOXY RESINS; FINITE ELEMENT METHOD; INTERFACES (MATERIALS); STEEL; STRESS CONCENTRATION; SURFACE ROUGHNESS; TENSILE TESTING; THICKNESS MEASUREMENT;

CONTACT AREA; DOUBLE LAP JOINTS; TENSILE LOAD BEARING CAPACITY;

BONDING;

EID: 0037247291     PISSN: 00219983     EISSN: None     Source Type: Journal    
DOI: 10.1177/0021998303037005040     Document Type: Article

References (26)

1. Shin, K.C. and Lee, J.J. (2000). Tensile Load Bearing Capacity of Co-Cured Double Lap Joints, Journal of Adhesion Science and Technology, 14: 1539-1556.
2. Jones, R., Chiu, W.K. and Paul, J. (1993). Designing for Damage Tolerant Bonded Joints, Composite Structures, 25: 201-207.
3. He, S. and Rao, M.D. (1994). Residual Stresses and Delamination Problems Induced by Co-Curing of Damped Composite Laminates, Journal of Composite Materials, 28: 112-129.
4. Kim, H.S., Lee, S.J. and Lee, D.G. (1995). Development of a Strength Model for the Co-Cured Stepped Lap Joints Under Tensile Loading, Composite Structures, 32: 593-600.
5. Scott, M.L., Raju, J.A.S and Cheung, A.K.H. (1998). Design and Manufacturing of a Post-Buckling Co-Cured Composite Aileron, Composite Science and Technology, 58: 199-210.
6. Olivier, P. and Cottu, J.P. (1998). Optimisation of the Co-Curing of Two Different Composites with the Aim of Minimising Residual Curing Stress Levels, Composite Science and Technology, 58: 645-651.
7. Choi, J.H. and Lee, D.G. (1997). Torque Capacity of Co-Cured Tubular Lap Joints, Journal of Composite Materials, 31: 1381-1396.
8. Lee, S.W., Lee, D.G. and Jeong, K.S. (1997). Static and Dynamic Torque Characteristics of Composite Co-Cured Single Lap Joint, Journal of Composite Materials, 31: 2188-2201.
9. Cho, D.H., Lee, D.G. and Cho, J.H. (1997). Manufacture of One-Piece Automotive Drive Shafts with Aluminum and Composite Materials, Composite Structures, 38: 309-319.
10. Cho, D.H. and Lee, D.G. (1998). Manufacturing of Co-Cured Composite Aluminum Shafts with Compression During Co-Curing Operation to Reduce Residual Thermal Stresses, Journal of Composite Materials, 32: 1221-1241.
11. Lee, D.G. and Cho, D.H. (2000). Prediction of the Tensile Load Capability of Co-Cured Steel-Composite Tubular Single Lap Joints Considering Thermal Degradation, Journal of Composite Materials, 34: 689-722.
12. Cho, D.H. and Lee, D.G. (2000). Optimum Design of Co-Cured Steel-Composite Tubular Single Lap Joints Under Axial Load. Journal of Adhesion Science and Technology, 14: 939-963.
13. Shin, K.C., Lee, J.J. and Lee, D.G. (2000). A Study on the Lap Shear Strength of a Co-Cured Single Lap Joint, Journal of Adhesion Science and Technology, 14: 123-139.
14. Shin, K.C. and Lee, J.J. (2000). Prediction of the Tensile Load Bearing Capacity of a Co-Cured Single Lap Joint Considering Residual Thermal Stresses, Journal of Adhesion Science and Technology, 14: 1691-1704.
15. Wilkins, D.J. et al. (1994). Japanese Research and Development in the Manufacturing of Polymer Composite Structures, National Technical Information Service (NTIS) Report #PB94-161403.
16. O'Brien, T.K. (1995). Test Methods for Characterizing Composite Skin-Stringer Debonding, NASA Langley Research Center, Hampton, VA.
17. Crane, L.W., Hamermesh, C.L. and Maus, L. (1976). Surface Treatment of Cured Epoxy Graphite Composite to Improve Adhesive Bonding, SAMPE Journal, 12: 6-9.
18. Parker, B. M. and Waghorne, R.M. (1982). Surface Pretreatment of Carbon Fiber-Reinforced Composites for Adhesive Bonding, Composites, 13: 280-288.
19. Lee, D.G., Kim, K.S. and Im, Y.T. (1991). An Experimental Study of Fatigue Strength for Adhesively Bonded Tubular Single Lap Joints, Journal of Adhesion, 35: 39-53.
20. Renton, J.W. and Vinson, J.R. (1975). On the Behavior of Bonded Joints in Composite Material Structures, Engineering Fracture Mechanics, 7: 41-60.
21. Goeij De, W.C., van Tooren, M.J.L. and Beukers, A. (1999). Composite Adhesive Joints under Cyclic Loading, Materials and Design, 20: 213-221.
22. Oh, J.H., Kim, J.K., Lee, D.G. and Jeong, K.S. (1999). Interlaminar Shear Behavior of Thick Carbon Epoxy Composite Materials, Journal of Composite Materials, 33: 2080-2115.
23. (1995). Annual Book of ASTM Standards (General Products, Chemical Specialties, and End Use of Products), Vol. 15, American Society for Testing and Materials, Philadelphia, PA.
24. (1998). ABAQUS/Standard User's Manual, Hibbitt, Karlsson & Sorensen, Pawtucket, RI.
25. Reddy, H.N. (1997). Mechanics of Laminated Composite Plates: Theory and Analysis, pp. 752-754, CRC Press, Inc., Boca Raton, Florida.
26. Ye, L. (1988). Role of Matrix Resin in Delamination Onset and Growth in Composite Laminates, Composites Science and Technology, 33: 257-277.