메뉴 건너뛰기




Volumn 18, Issue 1, 2003, Pages 23-49

Research and progress in laser welding of wrought aluminum alloys. II. Metallurgical microstructures, defects, and mechanical properties

Author keywords

Aluminum alloys; CO2 laser; Deep penetration mode; Defects; Keyhole mode; Laser beam welding; Laser welding; Mechanical properties; Microstructure; Nd:YAG laser; Review; Wrought aluminum alloys

Indexed keywords

ALLOYING ELEMENTS; CARBON DIOXIDE LASERS; CRACK INITIATION; FATIGUE OF MATERIALS; FORMABILITY; HARDNESS; LASER BEAM WELDING; METALLOGRAPHIC MICROSTRUCTURE; POROSITY; TENSILE STRENGTH;

EID: 0037222793     PISSN: 10426914     EISSN: None     Source Type: Journal    
DOI: 10.1081/AMP-120017587     Document Type: Article
Times cited : (153)

References (96)
  • 1
    • 0002204386 scopus 로고    scopus 로고
    • Fabrication and weldability in structures
    • Lanza, M.; Lauro, A.; Scanavino, S. Fabrication and weldability in structures. AL Aluminum Alloys 2001, 13 (135), 8-86.
    • (2001) AL Aluminum Alloys , vol.13 , Issue.135 , pp. 80-86
    • Lanza, M.1    Lauro, A.2    Scanavino, S.3
  • 2
    • 1442347524 scopus 로고    scopus 로고
    • Study on porosity formation in laser welds of aluminum alloys (Report 2)-Mechanism of porosity formation by hydrogen magnesium
    • Kutsuna, M.; Yan, Q. U. Study on porosity formation in laser welds of aluminum alloys (Report 2) - Mechanism of porosity formation by hydrogen magnesium. J. Light Met. Weld. Constr. 1998, 36 (11). 1-17.
    • (1998) J. Light Met. Weld. Constr. , vol.36 , Issue.11 , pp. 1-17
    • Kutsuna, M.1    Yan, Q.U.2
  • 3
    • 0034344289 scopus 로고    scopus 로고
    • Laser beam welding of wrought aluminum alloys
    • Ion, J.C. Laser beam welding of wrought aluminum alloys. Sci. Technol. Weld. Joining 2000, 5 (5), 265-276.
    • (2000) Sci. Technol. Weld. Joining , vol.5 , Issue.5 , pp. 265-276
    • Ion, J.C.1
  • 4
    • 0002429670 scopus 로고
    • The laser-welding spectrum: What it has to offer you
    • Sprow, E.E. The laser-welding spectrum: what it has to offer you. Tooling Prod. 1988, 54 (3), 56-563.
    • (1988) Tooling Prod. , vol.54 , Issue.3 , pp. 56-563
    • Sprow, E.E.1
  • 5
    • 0032288991 scopus 로고    scopus 로고
    • Progress in joining of advanced materials
    • Cam, G.; Kocak, M. Progress in joining of advanced materials. Int. Mater. Rev. 1998, 43 (1), 1-44.
    • (1998) Int. Mater. Rev. , vol.43 , Issue.1 , pp. 1-44
    • Cam, G.1    Kocak, M.2
  • 6
    • 22044449094 scopus 로고    scopus 로고
    • Progress in joining of advanced materials - Part 2: Joining of metal matrix composites and joining of other advanced materials
    • Cam, G.; Kocak, M. Progress in joining of advanced materials - Part 2: joining of metal matrix composites and joining of other advanced materials. Sci. Technol. Weld. Joining 1998, 3 (4), 159-175.
    • (1998) Sci. Technol. Weld. Joining , vol.3 , Issue.4 , pp. 159-175
    • Cam, G.1    Kocak, M.2
  • 8
    • 0001595026 scopus 로고
    • Microstructural evaluation of low and high duty cycle Nd:YAG laser beam welds in 2024-T3 aluminum
    • Milewski, J.O.; Lewis, G.K.; Wittig, J.E. Microstructural evaluation of low and high duty cycle Nd:YAG laser beam welds in 2024-T3 aluminum. Weld. J. 1993, 72 (7), 341S-346S.
    • (1993) Weld. J. , vol.72 , Issue.7
    • Milewski, J.O.1    Lewis, G.K.2    Wittig, J.E.3
  • 10
    • 0032592529 scopus 로고    scopus 로고
    • Quantitative evaluation of softened regions in weld heat-affected zones of 6061-T6 aluminum alloy - Characterizing of the laser beam welding process
    • Hirose, A.; Todaka, H.; Yamaoka, H.; Kurosawa, N.; Kobayashi, K. Quantitative evaluation of softened regions in weld heat-affected zones of 6061-T6 aluminum alloy - Characterizing of the laser beam welding process. Metall. Mater. Trans. A 1999, 30A, 2115-2120.
    • (1999) Metall. Mater. Trans. A , vol.30 A , pp. 2115-2120
    • Hirose, A.1    Todaka, H.2    Yamaoka, H.3    Kurosawa, N.4    Kobayashi, K.5
  • 11
    • 0033317287 scopus 로고    scopus 로고
    • Current issues problems in laser welding of automotive aluminum alloys
    • Zhao, H.; White, D.R.; DebRoy, T. Current issues problems in laser welding of automotive aluminum alloys. Int. Mater. Rev. 1999, 44 (6), 238-266.
    • (1999) Int. Mater. Rev. , vol.44 , Issue.6 , pp. 238-266
    • Zhao, H.1    White, D.R.2    DebRoy, T.3
  • 12
    • 5544263470 scopus 로고    scopus 로고
    • Factors affecting mechanical properties of laser welded aluminum alloys
    • Katoh, M. Factors affecting mechanical properties of laser welded aluminum alloys. J. Light Met. Weld. Constr. 1996, 34 (4), 42-48.
    • (1996) J. Light Met. Weld. Constr. , vol.34 , Issue.4 , pp. 42-48
    • Katoh, M.1
  • 13
    • 0030126756 scopus 로고    scopus 로고
    • Microstructure, hardness profile and tensile strength in welds of AA6013-T6 extrusions
    • Guitterez, L.A.; Neye, G.; Zschech, E. Microstructure, hardness profile and tensile strength in welds of AA6013-T6 extrusions. Weld. J. 1996, 75 (4), 115S-121S.
    • (1996) Weld. J. , vol.75 , Issue.4
    • Guitterez, L.A.1    Neye, G.2    Zschech, E.3
  • 14
    • 0001113595 scopus 로고    scopus 로고
    • 2 and Nd:YAG laser beam welding of 6111-T4 aluminum alloy for automotive applications
    • 2 and Nd:YAG laser beam welding of 6111-T4 aluminum alloy for automotive applications. J. Laser Appl. 2000, 12 (3), 101-115.
    • (2000) J. Laser Appl. , vol.12 , Issue.3 , pp. 101-115
    • Ramasamy, S.1    Albright, C.E.2
  • 15
    • 0035649430 scopus 로고    scopus 로고
    • 2 and Nd-YAG laser beam welding of 5754-O aluminum alloy for automotive applications
    • 2 and Nd-YAG laser beam welding of 5754-O aluminum alloy for automotive applications. Sci. Technol. Weld. Joining 2001, 6 (3), 182-190.
    • (2001) Sci. Technol. Weld. Joining , vol.6 , Issue.3 , pp. 182-190
    • Ramasamy, S.1    Albright, C.E.2
  • 16
    • 0000531814 scopus 로고    scopus 로고
    • Why is it so difficult to produce an equiaxed microstructure during welding
    • Gaumann, M.; Kurz, W. Why is it so difficult to produce an equiaxed microstructure during welding. Math. Model. Weld. Phenom. 4 1998, 695, 125-136.
    • (1998) Math. Model. Weld. Phenom. 4 , vol.695 , pp. 125-136
    • Gaumann, M.1    Kurz, W.2
  • 19
    • 0001881093 scopus 로고    scopus 로고
    • Laser welding aluminum alloys
    • Clarke, J.A. Laser welding aluminum alloys. Ind. Laser Solut. 2000, 15 (6), 17-22.
    • (2000) Ind. Laser Solut. , vol.15 , Issue.6 , pp. 17-22
    • Clarke, J.A.1
  • 21
    • 0012257536 scopus 로고
    • Molten aluminum processing and casting
    • Davis, J.R. Molten aluminum processing and casting. ASM Speciality Handbook; 1993; 199-230.
    • (1993) ASM Speciality Handbook , pp. 199-230
    • Davis, J.R.1
  • 22
    • 33749148591 scopus 로고    scopus 로고
    • Porosity, underfill and magnesium loss during continuous wave Nd:YAG laser welding of thin plates of aluminum alloys 5182 and 5754
    • Pastor, M.; Zhao, H.; Martukanitz, R.P.; DebRoy, T. Porosity, underfill and magnesium loss during continuous wave Nd:YAG laser welding of thin plates of aluminum alloys 5182 and 5754. Weld. J. 1999, 207S-216S.
    • (1999) Weld. J.
    • Pastor, M.1    Zhao, H.2    Martukanitz, R.P.3    DebRoy, T.4
  • 24
    • 0000174150 scopus 로고
    • The influence of molten metal processing on mechanical properties of cast Al-Si-Mg alloys
    • Sigworth, G.K.; Shivkumar, S.; Apelian, D. The influence of molten metal processing on mechanical properties of cast Al-Si-Mg alloys. AFS Trans. 1989, 97, 811-824.
    • (1989) AFS Trans. , vol.97 , pp. 811-824
    • Sigworth, G.K.1    Shivkumar, S.2    Apelian, D.3
  • 28
    • 0001929732 scopus 로고    scopus 로고
    • Welding aluminum tailored blanks with Nd:YAG laser for automotive applications
    • Naeem, M.; Jessett, R. Welding aluminum tailored blanks with Nd:YAG laser for automotive applications. Pract. Weld. Today 1999, 3 (1), 24-28.
    • (1999) Pract. Weld. Today , vol.3 , Issue.1 , pp. 24-28
    • Naeem, M.1    Jessett, R.2
  • 29
    • 0002564362 scopus 로고    scopus 로고
    • Technological advances in aluminum laser welding
    • Weeter, L. Technological advances in aluminum laser welding. Pract. Weld. Today 1998, 2, (1), 56-57.
    • (1998) Pract. Weld. Today , vol.2 , Issue.1 , pp. 56-57
    • Weeter, L.1
  • 31
    • 0033901913 scopus 로고    scopus 로고
    • Laser welding of aluminum alloys: From fundamental investigation to industrial application
    • Chen, X., Fujioka, T., Mataunawa, A., Eds.
    • Dausinger, F. Laser welding of aluminum alloys: from fundamental investigation to industrial application. In High-Power Lasers in Manufacturing; Chen, X., Fujioka, T., Mataunawa, A., Eds.; 2000; Vol. 3888, 367-379.
    • (2000) High-Power Lasers in Manufacturing , vol.3888 , pp. 367-379
    • Dausinger, F.1
  • 34
    • 0342484461 scopus 로고    scopus 로고
    • Pore formation during continuous wave Nd:YAG laser welding of aluminum for automotive applications
    • Pastor, M.; Zhao, H.; Debroy, T. Pore formation during continuous wave Nd:YAG laser welding of aluminum for automotive applications. Rev. Metal. 2000, 36 (2), 108-117.
    • (2000) Rev. Metal. , vol.36 , Issue.2 , pp. 108-117
    • Pastor, M.1    Zhao, H.2    Debroy, T.3
  • 36
    • 0033691508 scopus 로고    scopus 로고
    • Porosity formation mechanism and suppression procedure in laser welding of aluminum alloys
    • Seto, N.; Katayama, S.; Matsunawa, A. Porosity formation mechanism and suppression procedure in laser welding of aluminum alloys. Q. J. Jpn Weld. Soc. 2000, 18 (2), 243-255.
    • (2000) Q. J. Jpn Weld. Soc. , vol.18 , Issue.2 , pp. 243-255
    • Seto, N.1    Katayama, S.2    Matsunawa, A.3
  • 37
  • 39
    • 0003182315 scopus 로고    scopus 로고
    • Solid state lasers - Development trends and application potentials
    • Hugel, H. Solid state lasers - development trends and application potentials. 7th NOLAMP Proc./NORDIC Conf., 1999: Vol. 1, 1-12.
    • 7th NOLAMP Proc./NORDIC Conf., 1999 , vol.1 , pp. 1-12
    • Hugel, H.1
  • 41
    • 0030400225 scopus 로고    scopus 로고
    • Welding of aluminum: A challenging opportunity for laser welding
    • Dausinger, F.; Rapp, J.; Beck, M.; Faisst, F.; Hack, R.; Hugel, H. Welding of aluminum: a challenging opportunity for laser welding. J. Laser Appl. 1996, 8 (6), 285-290.
    • (1996) J. Laser Appl. , vol.8 , Issue.6 , pp. 285-290
    • Dausinger, F.1    Rapp, J.2    Beck, M.3    Faisst, F.4    Hack, R.5    Hugel, H.6
  • 43
    • 5944226690 scopus 로고    scopus 로고
    • Welding performance of high power yag lasers with aluminum alloys
    • Kanazawa, H. Welding performance of high power yag lasers with aluminum alloys. J. Light Met. Weld. Constr. 1997, 35 (7), 10-15.
    • (1997) J. Light Met. Weld. Constr. , vol.35 , Issue.7 , pp. 10-15
    • Kanazawa, H.1
  • 46
    • 0002296643 scopus 로고    scopus 로고
    • Surface related features of laser welding of aluminum alloys
    • Weston J. Surface related features of laser welding of aluminum alloys. ISIJ Int. 2000, 40, S6-S9.
    • (2000) ISIJ Int. , vol.40
    • Weston, J.1
  • 48
    • 0004226334 scopus 로고
    • Butterworth-Heinemann: Oxford
    • Campbell, J. Casting; Butterworth-Heinemann: Oxford, 1991.
    • (1991) Casting
    • Campbell, J.1
  • 49
    • 0002968649 scopus 로고    scopus 로고
    • Laser welding technology: Trends in industrial applications and quality assessment
    • Kocak, M.; Dos Santos, J.F. Laser welding technology: trends in industrial applications and quality assessment. Rev. Soudure 1999, 55 (4), 26-35.
    • (1999) Rev. Soudure , vol.55 , Issue.4 , pp. 26-35
    • Kocak, M.1    Dos Santos, J.F.2
  • 50
    • 0023996033 scopus 로고
    • On the weldability, composition, and hardness of pulsed and continuous Nd:YAG laser welds in aluminum alloys 6061, 5456, and 5086
    • Cieslak, M.J.; Fuerschbach, P.W. On the weldability, composition, and hardness of pulsed and continuous Nd:YAG laser welds in aluminum alloys 6061, 5456, and 5086. Metall. Trans. B 1988, 19B, 319-333.
    • (1988) Metall. Trans. B , vol.19 B , pp. 319-333
    • Cieslak, M.J.1    Fuerschbach, P.W.2
  • 52
    • 0012329915 scopus 로고    scopus 로고
    • Solidification phenomena of weld metals-Solidification cracking mechanism and cracking susceptibility (3rd report)
    • Katayama, S. Solidification phenomena of weld metals-solidification cracking mechanism and cracking susceptibility (3rd Report). J. Light Met. Weld. Constr. 2000, 38 (9), 13-23.
    • (2000) J. Light Met. Weld. Constr. , vol.38 , Issue.9 , pp. 13-23
    • Katayama, S.1
  • 53
    • 0012253207 scopus 로고
    • Solidification of metals
    • Bishop, H.F.; Pellini, W.S. Solidification of metals. Foundry 1952, 80, 86-93.
    • (1952) Foundry , vol.80 , pp. 86-93
    • Bishop, H.F.1    Pellini, W.S.2
  • 54
    • 0000213997 scopus 로고
    • Strain theory of hot tearing
    • Pellini, W.S. Strain theory of hot tearing. Foundry 1952, 80 (1/2), 124-133, 192-199.
    • (1952) Foundry , vol.80 , Issue.1-2
    • Pellini, W.S.1
  • 55
    • 0002838762 scopus 로고
    • Properties of the aluminum-silicon alloys at temperatures in the region of the solidus
    • Singer, A.R.E.; Cottrell, S.A. Properties of the aluminum-silicon alloys at temperatures in the region of the solidus. J. Inst. Met. 1946, 73, 33-54.
    • (1946) J. Inst. Met. , vol.73 , pp. 33-54
    • Singer, A.R.E.1    Cottrell, S.A.2
  • 56
    • 0000886865 scopus 로고
    • Hot-shortness of the aluminum-silicon alloys of commercial purity
    • Singer, A.R.E.; Jennings, P.H. Hot-shortness of the aluminum-silicon alloys of commercial purity. J. Inst. Met. 1947, 74, 197-212.
    • (1947) J. Inst. Met. , vol.74 , pp. 197-212
    • Singer, A.R.E.1    Jennings, P.H.2
  • 57
    • 0000696851 scopus 로고
    • A consideration of the nature of brittleness at temperatures above the solidus in castings and welds in aluminum alloys
    • Pumphrey, W.I.; Jennings, P.H. A consideration of the nature of brittleness at temperatures above the solidus in castings and welds in aluminum alloys. J. Inst. Met. 1948, 75, 235-256.
    • (1948) J. Inst. Met. , vol.75 , pp. 235-256
    • Pumphrey, W.I.1    Jennings, P.H.2
  • 58
    • 0001047074 scopus 로고
    • Generalized theory of super-solidus cracking in welds (and castings)
    • Borland, J.C. Generalized theory of super-solidus cracking in welds (and castings). Br. Weld. J. 1960, 7 (8), 508-512.
    • (1960) Br. Weld. J. , vol.7 , Issue.8 , pp. 508-512
    • Borland, J.C.1
  • 59
    • 0000921892 scopus 로고
    • Suggested explanation of hot cracking in mild and low alloy steel welds
    • Borland, J.C. Suggested explanation of hot cracking in mild and low alloy steel welds. Br. Weld. J. 1961, 8 (11), 526-540.
    • (1961) Br. Weld. J. , vol.8 , Issue.11 , pp. 526-540
    • Borland, J.C.1
  • 60
    • 0012351849 scopus 로고
    • Hot cracks in welded joints
    • Prokhorov, N.N. Hot cracks in welded joints. Weld. Prod. 1962, 9 (4), 1-8.
    • (1962) Weld. Prod. , vol.9 , Issue.4 , pp. 1-8
    • Prokhorov, N.N.1
  • 61
    • 0000325813 scopus 로고
    • Preventing weld cracks in high-strength aluminum alloys
    • Dudas, J.H.; Collins, F.R. Preventing weld cracks in high-strength aluminum alloys. Weld. J. 1966, 45, 241S-249S.
    • (1966) Weld. J. , vol.45
    • Dudas, J.H.1    Collins, F.R.2
  • 64
    • 0002732775 scopus 로고    scopus 로고
    • Laser welding of aluminum alloy sheets for the automotive industry
    • Nov 24-25
    • Naeem, M.; Riches, S.T. Laser welding of aluminum alloy sheets for the automotive industry. Materials for Lean Weight Vehicles (UK), Nov 24-25, 1997; 185-192.
    • (1997) Materials for Lean Weight Vehicles (UK) , pp. 185-192
    • Naeem, M.1    Riches, S.T.2
  • 69
    • 0001710779 scopus 로고
    • The solubility hydrogen in liquid and solid aluminum
    • Ransley, C.E.; Neufeld, H. The solubility hydrogen in liquid and solid aluminum. J. Inst. Met. 1948, 74, 599-620.
    • (1948) J. Inst. Met. , vol.74 , pp. 599-620
    • Ransley, C.E.1    Neufeld, H.2
  • 70
    • 0000136036 scopus 로고    scopus 로고
    • Effects of precipitation of primary intermetallic compounds on the mechanical properties of cast Al 11.5Si 0.4Mg alloy
    • Cao, X.; Campbell, J. Effects of precipitation of primary intermetallic compounds on the mechanical properties of cast Al 11.5Si 0.4Mg alloy. AFS Trans. 2000, 108, 391-400.
    • (2000) AFS Trans. , vol.108 , pp. 391-400
    • Cao, X.1    Campbell, J.2
  • 71
    • 0012351850 scopus 로고    scopus 로고
    • Heat treatment of liquid metal: Precipitation and sedimentation processing of liquid Al-11.5Si-0.4Mg alloy
    • Ph.D. Thesis, The University of Birmingham
    • Cao, X. Heat treatment of liquid metal: precipitation and sedimentation processing of liquid Al-11.5Si-0.4Mg alloy. Ph.D. Thesis, The University of Birmingham, 2001.
    • (2001)
    • Cao, X.1
  • 72
    • 0034364496 scopus 로고    scopus 로고
    • Precipitation of primary intermetallic compounds in liquid Al 11.5Si 0.4Mg alloy
    • Cao, X.; Campbell, J. Precipitation of primary intermetallic compounds in liquid Al 11.5Si 0.4Mg alloy. Int. J. Cast Met. Res. 2000, 13, 175-184.
    • (2000) Int. J. Cast Met. Res. , vol.13 , pp. 175-184
    • Cao, X.1    Campbell, J.2
  • 73
    • 0012312882 scopus 로고    scopus 로고
    • Convection-free precipitation of primary iron-rich phase in liquid Al 11.5Si 0.4Mg alloy
    • Cao, X.; Campbell, J. Convection-free precipitation of primary iron-rich phase in liquid Al 11.5Si 0.4Mg alloy. AFS Trans. 2001, 109, 501-515.
    • (2001) AFS Trans. , vol.109 , pp. 501-515
    • Cao, X.1    Campbell, J.2
  • 74
    • 0001218243 scopus 로고    scopus 로고
    • The concept of the fatigue potential of cast alloys
    • Nyahumwa, C.; Green, N.R.; Campbell, J. The concept of the fatigue potential of cast alloys. J. Mech. Behav. Mater. 1998, 9(4), 227-235.
    • (1998) J. Mech. Behav. Mater. , vol.9 , Issue.4 , pp. 227-235
    • Nyahumwa, C.1    Green, N.R.2    Campbell, J.3
  • 76
    • 0035247770 scopus 로고    scopus 로고
    • Welding metal composition change during conduction mode laser welding of aluminum alloy 5182
    • Zhao, H.; DebRoy, T. Welding metal composition change during conduction mode laser welding of aluminum alloy 5182. Metall. Mater. Trans. B 2001, 32B, 163-172.
    • (2001) Metall. Mater. Trans. B , vol.32 B , pp. 163-172
    • Zhao, H.1    Debroy, T.2
  • 77
    • 51249172166 scopus 로고
    • Mechanism of alloying element vaporisation during laser welding
    • Collur, M.M.; Paul, A.; DebRoy, T. Mechanism of alloying element vaporisation during laser welding. Metall. Trans. B 1987, 18B, 733-740.
    • (1987) Metall. Trans. B , vol.18 B , pp. 733-740
    • Collur, M.M.1    Paul, A.2    Debroy, T.3
  • 79
    • 0022112563 scopus 로고
    • Control of magnesium loss during laser welding of Al-5083 using a plasma suppression technique
    • Blake, A.; Mazumder, J. Control of magnesium loss during laser welding of Al-5083 using a plasma suppression technique. J. Eng. Ind. 1985, 107 (3), 275-280.
    • (1985) J. Eng. Ind. , vol.107 , Issue.3 , pp. 275-280
    • Blake, A.1    Mazumder, J.2
  • 80
    • 0034245386 scopus 로고    scopus 로고
    • Growth features of crystals in laser-welded aluminum and aluminum alloys
    • Yamaguchi, T.; Kato, M.; Nishio, K.; Sawai, N. Growth features of crystals in laser-welded aluminum and aluminum alloys. Q. J. Jpn Weld. Soc. 2000, 18 (3), 459-467.
    • (2000) Q. J. Jpn Weld. Soc. , vol.18 , Issue.3 , pp. 459-467
    • Yamaguchi, T.1    Kato, M.2    Nishio, K.3    Sawai, N.4
  • 83
    • 0035248032 scopus 로고    scopus 로고
    • Hardness distribution of YAG laser-welded A5052 aluminum alloy
    • Yamaguchi, T.; Kato, M.; Nishio, K.; Fukami, K. Hardness distribution of YAG laser-welded A5052 aluminum alloy. Q. J. Jpn Weld. Soc. 2001, 19(1), 114-121.
    • (2001) Q. J. Jpn Weld. Soc. , vol.19 , Issue.1 , pp. 114-121
    • Yamaguchi, T.1    Kato, M.2    Nishio, K.3    Fukami, K.4
  • 85
    • 0039721724 scopus 로고    scopus 로고
    • High quality aluminum welding-a key factor in future car body production
    • Larsson, L.; Palmquist, N.; Larsson, K. High quality aluminum welding-a key factor in future car body production. Svetsaren 2000. 54(2), 17-24.
    • (2000) Svetsaren , vol.54 , Issue.2 , pp. 17-24
    • Larsson, L.1    Palmquist, N.2    Larsson, K.3
  • 91
    • 0034973491 scopus 로고    scopus 로고
    • Microstructural control of laser-welded aluminum alloys
    • Yamaoka, H. Microstructural control of laser-welded aluminum alloys. J. Light Met. Weld. Constr. 2001, 39(5), 1-7.
    • (2001) J. Light Met. Weld. Constr. , vol.39 , Issue.5 , pp. 1-7
    • Yamaoka, H.1
  • 92
    • 0035934394 scopus 로고    scopus 로고
    • Light-weight structures produced by laser beam joining for future applications in automobile and aerospace industry
    • Schubert, E.; Klassen, M.; Zerner, I.; Walz, C.; Sepold, G. Light-weight structures produced by laser beam joining for future applications in automobile and aerospace industry. J. Mater. Process. Tech. 2001, 115, 2-8.
    • (2001) J. Mater. Process. Tech. , vol.115 , pp. 2-8
    • Schubert, E.1    Klassen, M.2    Zerner, I.3    Walz, C.4    Sepold, G.5
  • 93
    • 25744434815 scopus 로고
    • Mechanical properties of laser welded Al-alloys
    • Lang, A.; Bergmann, H.W. Mechanical properties of laser welded Al-alloys. Proc. ECLAT 1992, 163-168.
    • (1992) Proc. ECLAT , pp. 163-168
    • Lang, A.1    Bergmann, H.W.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.