Cutting tools for metal matrix composites

Key Engineering Materials

Volumn 138-140, Issue , 1998, Pages 289-325

  Hung, N P ^a   Venkatesh, V C ^a   Loh, N L ^a  

^a NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

Author keywords

Cumulative Wear; Cutting Fluid; Cutting Tool; Machinability; Machining; Metal Matrix Composites; Microstructure; Sub Surface Damage; Tool Life Modeling; Tool Material; Tool Wear

Indexed keywords

CUTTING FLUIDS; DIAMOND FILMS; MACHINABILITY; MATHEMATICAL MODELS; METALLIC MATRIX COMPOSITES; MICROSTRUCTURE; MILLING (MACHINING); POLYCRYSTALLINE MATERIALS; SERVICE LIFE; STEEL; TURNING; WEAR OF MATERIALS;

HIGH SPEED STEEL; TOOL LIFE MODEL;

CUTTING TOOLS;

EID: 0031701746     PISSN: 10139826     EISSN: 16629795     Source Type: Book Series    
DOI: None     Document Type: Article

References (62)

1. Terry, B., Metal Matrix Composites, Current Developments & Future Trends in Industrial Research & Applications, Elsevier Science , 1990, pp. 84-87.
2. Hoover W., and Sawtell, R., Research Guidelines for Aluminum Product Application in Transportation and Industry, Proceedings, ASME, Florida, 1993, pp. 34-35.
3. Santhanam, A.T. and Quinto D.T., "Surface Engineering of Carbide, Cermet, and Ceramic Cutting Tools," ASM Handbook, Surface Engineering, 5 , 1994, pp. 900-908.
4. Venkatesh, V.C., & Chandrasekharan, H., Experimental Techniques In Metal Cutting, Prentice Hall of India, 1987.
5. Venkatesh, V.C., "Diffusion Wear of HSS Tools," Proc. 7th MTDR Conference , Birmingham, 1966, pp. 401-413.
6. Shaw, M.C., Metal Cutting Principles, Oxford Science Publications, 1989.
7. Santhanam, A.T., Tierney, P., and Hunt, J.L., "Cemented Carbides," ASM's Metals Handbook, 2, 1990, pp. 950-977.
8. Venkatesh, V.C., & Sachitanandam, M., "A Discussion on Tool Life Criteria and Total Failure Causes," Annals of the CIRP, 29:1, 1980, pp. 19-22.
9. Brookes, K.J.A:, "Cemented Carbides," International Carbide Data, UK, 1983.
10. Schneider, G., "Principles of Tungsten Carbide Engineering," Society of Carbide and Tool Engineering, USA, 1989.
11. Venkatesh, V.C., "Wear Studies in TiC Coated Cemented Titanium Carbide Tools," Transactions of the ASME, 106, January 1984, pp. 84-87.
12. Tonshoff, H.K., Wobker, H.G., and Cassel, C., "Wear Characteristics Of Cermet Cutting Tools," Annals of the CIRP, 43:1, 1994, pp. 89-92.
13. Greenleaf Corporation, "The Application Of Whisker Reinforced Ceramic/ Ceramic Composites," Saegertown, PA, USA, 1989.
14. DeBeers Diamond Division, "Introduction to PCD and PCBN Cutting Tool Materials," Berkshire, UK, 1993.
15. Davis, R.F., Diamond Films And Coatings, Noyes Publications, USA, 1993.
16. Hintermann, H.E. and Chattopadyay, A.K., "Low Pressure Synthesis Of Diamond Coating," Annals of the CIRP, 42:2, 1993, pp. 769-783.
17. Inspektor, A., Bauer, C.E. and Oles, E.J., "Superhard Coatings For Metal Applications," Surface and Coating Technology, 68-69, 1994, pp. 359-368.
18. Venkatesh, V.C. and Enomoto, S., "Finishing Methods Using Defined Cutting Edges," ASM Handbook, Surface Engineering, 5, 1994, pp. 84-89.
19. Hobert, S., "Table of Cutting Speeds, Feeds, Depth of Cut, Tool Geometry and Coolant When Using Single Crystal Diamond Tools," Precitech Inc., 1995.
20. Yuan, Z.J., Geng, L., and Dong, S., "Ultraprecision Machining of SiCw/Al Composites," Annals of the CIRP, 42:1 , 1992, pp. 107-109.
21. Tomac, N., and Tonnessen, K., "Machinability of Particulate Aluminum Matrix Composites," Annals of the CIRP, 41:1 , 1992.
22. Lane, C., "Machining Characteristics Of Particulate-Reinforced Aluminum," Fabrication of Particulates Reinforced Metal Composites, ASM, Ohio, 1990, pp. 195-201.
23. Bergman, F. and Jacobson, S., "Tool Wear Mechanisms in Intermittent Cutting of Metal Matrix Composites," Wear, 179, 1994, pp. 89-93.
24. Saijo, K., Yagi, M., Shibuki, K., and Takatsu, S., "Deposition of Diamond for Cutting Tool Applications," J. Mat. & Manuf. Pro., 8:1, 1993, pp. 59-73.
25. Spur, G., and Lachmund, U., "Type-Specific Applicability of Polycrystalline Diamond," J. of Production Eng., 1:1 , 1993, pp. 77-80.
26. Nakai T., Kohno, Y., and Hara A., "Machining Ceramics by Polycrystalline Diamond," SME Technical Paper MR85-282, 1985.
27. Sande J.V.V., Uhlmann, D.R., and Akeson, A., "Improved Diamond Tool Life Through the Use of Coated Diamonds," SME Technical Paper MR85-308, 1985.
28. Lo Casto, S., Lo Valvo, E., Ruisi, V.F., Lucchini, E., and Maschio, S., "Wear Mechanism of Ceramic Tools," Wear, 160, 1993, pp. 227-235.
29. Klimendo, S.A., Mukovoz, Y.A., Lyashko, V.A., Vashchenko, A.N., and Ogorodnik, V.V., "On the Wear Mechanism Of Cubic Boron Nitride Base Cutting Tools," Wear, 157, 1992, pp. 1-7.
30. Weinert, K., "A Consideration of Tool Wear Mechanism When Machining Metal Matrix Composites (MMC)," Annals of the CIRP, 42:1, 1993.
31. König, W., "New Approaches to Characterizing the Performance of Coated Cutting Tools," Annals of the CIRP, 41:1, 1992, pp. 49-54.
32. Hung, N.P., Boey, F.Y.C., Khor, K.A., Phua, Y.S., and Lee, H.F., "Machinability of Aluminum Alloys Reinforced With Silicon Carbide Particulates," Proceedings of AMPT'93, Dublin, Ireland, 1993, pp. 9-20.
33. Hung, N.P., Tan, V.K., and Oon, B.E., "Modeling of Cumulative Tool Wear in Machining Metal Matrix Composites," Proceedings, ASME, AMD Vol. 208, MD Vol. 59, Los Angeles, USA, 1995, pp. 81-86.
34. Hung, N.P., Boey, F.Y.C., Khor, K.A., Oh, C.A., and Lee, H.F., "Machinability of Cast And Powder-Formed Aluminum Alloys Reinforced with SiC Particles," J. of Mat. Proc. Tech., 48, 1995, pp. 291-297.
35. Hung, N.P., Yeo, S.H., and Oon, B.E., "Effect of Grinding Fluid on the Machinability of Metal Matrix Composites," Proceedings, Mech. of Solids and Mat. Engineering, Singapore, 1995, pp. 262-268.
36. Hung, N.P., Loh, N.L., and Sano, T., "Effect of Microstructure on the Machinability of Metal Matrix Composites," Proceedings, 31st MATADOR, Manchester, UK, 1995, pp. 203-208.
37. Juvinall, R.C., Engineering Considerations of Stress, Strain, and Strength, McGraw Hill, 1967., p.222.
38. Levin, M., and Karlsson, B., "Crack Initiation And Growth During Low-Cycle Fatigue Of Discontinuous Reinforced Metal-Matrix Composites," Int. J. of Fatigue, 15:5, 1993, pp. 377-387.
39. 3p Composites," Composites Engineering, 5:5, 1995, pp. 509-517.
40. Chambers, A.R. and Stephens, S.E., "Machining of Al-5Mg Reinforced with 5 vol. % Saffil and 15 vol.% SiC," J. of Mat. Sci. and Eng., A135, 1991, pp. 287-290.
41. Chen, P., "High-Performance Machining of SiC Whisker-Reinforced Aluminum Composite By Self-Propelled Rotary Tool," Annals of the CIRP, 41:1 , 1992, pp. 59-62.
42. Coelho, R.T., Yamada, S., LeRoux, T., Aspinwall, D.K., and Wise, M.L.H., "Conventional Machining of Aluminum Based SiC Reinforced Metal Matrix Composite (MMC) Alloy," Proceedings of the 30th MATADOR, Manchester, UK, 1993, pp. 125-133.
43. Eastman, M., and Lane, C., "Machining MMCs," Cutting Tool Engineering, Oct. 1993, pp. 38-44.
44. Looney, L.A., Monaghan, J.M., O'Reilly, P., and Taplin, D.M.R., "The Turning of an Al/SiC Metal Matrix Composite," J. Mat. Pro. Tech., 33, 1992, pp. 453-468.
45. Lee, L.C., Lam, K. Y., and Liu, X.D., "Characterization of Tool Wear and Failure," J. of Mat. Pro. Tech. , 40, 1994, pp. 143-153.
46. Rahman, M., and Matin, M.A., "Effect of Tool Nose Radius on the Stability of Turning Processes," J. of Mat. Proc. Tech. , 26:9, 1991, pp. 13-21.
47. Harutaki, N., Usuki, H., and Ito, T., "A Study of the Cutting Performances of Diamond Coated Tools," SME Technical Paper MR91-208, 1991.
48. Cronjäger, L., and Meister, D., "Machining of Fibre and Particle-Reinforced Aluminum," Annals of the CIRP 41:1, 1992.
49. Lane, C., "Machinability of Aluminum Composites as a Function of Matrix Alloy and Heat Treatment," Proceedings, ASM Materials Week, Chicago, USA, 1992, pp. 3-15.
50. Lane, C., "The Effect of Different Reinforcements on PCD Tool Life for Aluminum Composites," Proceedings, ASM Materials Week, Chicago, USA, 1992, pp. 17-27.
51. Vaccari, J.A., and Lane, C.T., "Machining a new breed of aluminum," American Machinist, Nov. 1993, p.56.
52. Cronjäger, L., and Meitser, D., "Drilling of Fibre and Particle Reinforced Aluminum," Composite Material Technology, PD Vol. 37, ASME, 1991, pp. 185-189.
53. Jawaid, A., Barnes, S., and Ghadimzadeh, S.R., "Drilling of Particulate Aluminum Silicon Carbide Metal Matrix Composites," Proceedings, ASM Materials Week, Chicago, USA, 1992, pp. 35-47.
54. Ricci, W.S., "Machining Metal Matrix Composites," SME, MR87-827, 1987.
55. McGinty, M.J., and Preuss, C.W., "Machining Ceramic Fiber Metal Matrix Composites," Proceedings, High Productivity Machining Mat. & Pro., ASM, 1985, pp. 231-243.
56. Monaghan, J., and O'Reilly, P., "The Drilling of an Al/SiC Metal Matrix Composite," J. of Mat. Pro. Tech., 33, 1992, pp. 469-480.
57. Ammi, S., "Influence of Microstructure of Work Materials on The Cutting Tool Wear," Proceedings of The American Society for Precision Engineering, Seattle, USA, 1993 pp. 238-242.
58. Lane, C., "Machining Discontinuously-Reinforced Aluminum Composites," American Machinist, Nov. 93, pp. 56-60.
59. Quigley, O, Monaghan, J.M., and O'Reilley, P., "Factor Affecting The Machinability of an Al/SiC Metal Matrix Composite," J. of Mat. Pro. Tech., 43, 1994, pp. 21-36.
60. Meister, D., and Cronjäger, L., "Bohren in Faserverstarktem Aluminium nur Möglich Schneiden aus Hartmetall oder PKD," Machinenmarkt, Wurzburg 95, 23, 1989, pp. 28-32.
61. Machado, A.R., and Wallbank, J., "The Effects of a High-Pressure Coolant Jet on Machining," J. of Eng. Manuf., 208, 1994, pp. 29-38.
62. Heisel, U., and Lutz, M., "Investigation of Cooling and Lubricating Liquids," J. of Production Eng., 1:1, 1993, pp. 23-26.