Fault-tolerant drive-by-wire systems

IEEE Control Systems Magazine

Volumn 22, Issue 5, 2002, Pages 64-81

  Isermann, Rolf ^a   Schwarz, Ralf ^b   Stölzl, Stefan ^c  

^a DARMSTADT UNIVERSITY OF TECHNOLOGY   (Germany)

^b Geschäftsbereich Antrieb and Fahrwerk bei Continental Automotive Systems   (Germany)

^c Kastor Haus   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ACTUATORS; AUTOMOTIVE ENGINEERING; BRAKES; MATHEMATICAL MODELS; MECHATRONICS; PROBABILITY; REDUNDANCY; SENSORS; SPEED CONTROL; TORQUE CONVERTERS; TRACTION (FRICTION);

AUTOMOTIVE CONTROL;

FAULT TOLERANT COMPUTER SYSTEMS;

EID: 0036803653     PISSN: 02721708     EISSN: None     Source Type: Journal    
DOI: 10.1109/MCS.2002.1035218     Document Type: Article

References (48)

1. H.-M. Streib and H. Bischof, "Electronic throttle control (ETC): A cost effective system for improved emissions, fuel economy, and driveability," SAE Technical Paper Series, no. 960338, in R.K. Jurgen, Ed., "Electronic engine control technologies," Warrendale, PA, Society of Automotive Engineers, PT-73, pp. 165-172, 1998.
2. R.K. Jurgen, Ed., Electronic Engine Control Technologies. Warrendale, PA: Soc. Automotive Engineers, SAE PT-73, 1998.
3. A.T. van Zanten, R. Erhardt, and G. Pfaff, "VDC, the vehicle dynamics control system of Bosch," SAE Technical Paper Series, no. 950759, in R.K. Jurgen, Ed., "Electronic braking, traction, and stability control," Warrendale, PA: Soc. Automotive Engineers, SAE: PT-76, pp. 395-412, 1999.
4. R.K. Jurgen, Ed., "Electronic braking, traction, and stability control," Society of Automotive Engineers, Warrendale, PA, SAE: PT-76, 1999.
5. B. Connor, "Electric power assisted steering-An alternative to hydraulic and electro-hydraulic systems," Automobiltechnische Zeitschrift, vol. 98, nos. 7/8, p. 407, 1996.
6. S. Germann and R. Isermann, "Nonlinear distance and cruise control for passenger cars," in First IFAC-Workshop Advances in Automotive Control, Ascona, Switzerland, 1995, pp. 203-208.
7. H. Fritz, "Model-based neural speed control of vehicles" (in German), Automatisierungstechnik, vol. 44, no. 5, pp. 252-257, 1996.
8. E.D. Dickmanns, "Road vehicle eyes for high precision navigation," in High Precision Navigation, Linkwitz, Ed. Bonn, Germany: Dümmler Verlag, 1995, pp. 329-336.
9. W.B. Stevens, "The automated highway system program: A progress report," in Proc. 13th World Congr. IFAC, San Francisco, CA, 1996, pp. 25-33.
10. M. Tomizuka, "Automated highway systems-An intelligent transportation system for the next century," in Proc. IEEE/ASME Int. Conf. Advanced Intelligent Mechatronics '97, Tokyo, Japan, 1997, p. 1.
11. P. Rieth, "Electronic driver assistance" (in German), in VDA-Technischer Kongress, Frankfurt, Germany, 1999, pp. 119-136.
12. Functional Safety of Electrical/Electronic/Programmable Electronic Systems, Version 4.0, Part 1-7, Standard IEC 61508, 1997.
13. N. Storey, Safety-Critical Computer Systems. Essex, U.K.: Addison Wesley Longman Ltd., 1996.
14. M.J. Schneider, "Use of a hazard and operability study for evaluation of ABS control logic," SAE Technical Paper Series, no. 970815, in Electronic Braking, Traction, and Stability Control, R.K. Jurgen, Ed. Warrendale, PA: Society of Automotive Engineers, SAE: PT-76, 1988, pp. 65-93.
15. S. Stölzl, "Fault-tolerant pedal unit of an electromechanical brake system" (in German), Fortschr.-Ber. VDI-Verlag, Düsseldorf, Germany, Reihe 12, no. 426, 2000.
16. Prometheus, "Report on recommended practice of safety and reliability engineering of future automotive system," Eureka Prometheus European Project, Germany, 1998.
17. N. Leveson, Safeware. System Safety and Computer. Reading, MA: Addison-Wesley, 1995.
18. W.-D. Jonner, H. Winner, L. Dreilich, and E. Schunck, "Electrohydrautic brake system-The first approach to brake-by-wire technology," SAE Technical Paper Series, no. 960991, in Electronic Braking, Traction, and Stability Control, R.K. Jurgen, Ed. Warrendale, PA: Society of Automotive Engineers, SAE: PT-76, pp. 221-228, 1999.
19. H.E. Rauch, "Autonomous control reconfiguration," IEEE Control Syst. Mag., vol. 15, no. 6, pp. 37-48, 1995.
20. P.R. Chandler, "Reconfigurable flight control at Wright Laboratory," Neuilly-sur-Seine, France, vol. III, AGARD Advisory Rep. 360, Aerospace 2020, 1997.
21. R.J. Patton, "Fault-tolerant control: The 1997 situation," in Proc. IFAC Symp. Fault Detection, Supervision and Safety for Technical Processes (SAFEPROCESS), vol. 2. Kingston Upon Hull, U.K.: Elsevier, 1997, pp. 1033-1055.
22. J. Chen, R.J. Patton, and Z. Chen, "Active fault-tolerant flight control systems design using the linear matrix inequality method," Trans. Inst. Mens. Control, vol. 21, no. 2/3, pp. 77-84, 1999.
23. M. Blanke, R. Izadi-Zamanabadhi, S.A. Bogh, and C.P. Lunau, "Fault-tolerant control systems-A holistic view," Control Eng. Practice, vol. 5, no. 5, pp. 693-702, 1997.
24. P. Ballé, M. Fischer, D. Füssel, O. Nelles, and R. Isermann, "Integrated control, diagnosis and reconfiguration of a heat exchanger," IEEE Control Syst. Mag., vol. 18, no. 3, pp. 52-63, 1998.
25. S. Suryanaryanan and M. Tomizuka, "Fault-tolerant lateral control of automated vehicles based on simultaneous stabilization," in 1st IFAC Conf. Mechatronic Systems, Darmstadt, Germany, 2000, pp. 899-923.
26. R. Isermann, Ed. "Tutorial Workshop IFAC Congress 1996," IFAC J. Control Eng. Practice, Special Section on Supervision, Fault Detection and Diagnosis of Technical Processes, vol. 5, no. 5, pp. 637-719, 1996.
27. J.J. Gertler, Fault Detection and Diagnosis on Engineering Systems. New York: Marcel Dekker, 1999.
28. J. Chen and R.J. Patton, Robust Model-Based Fault Diagnosis for Dynamic Systems. Boston, MA: Kluwer, 1999.
29. R. lsermann, Supervision and Fault Diagnosis (in German). Düsseldorf, Germany: Springer/VDI-Verlag, 1994.
30. R. Isermann, "Integration of fault detection and diagnosis methods," in IFAC Symp. Fault Detection, Supervision and Safety for Technical Processes (SAFEPROCESS), Espoo, Finland, 1994, pp. 597-612.
31. T. Pfeufer, "Application of model-based fault detection and diagnosis to the quality assurance of an automotive actuator," Control Eng. Practice, vol. 5, no. 5, pp. 703-708, 1997.
32. O. Moseler, T. Heller, and R. Isermann, "Model-based fault detection for an actuator driven by a brushless dc motor," in Proc. 14th IFAC World Congr., vol. P. Beijing, China: 1999, pp. 193-198.
33. M.P. Henry and D.W. Clarke, "The self-validating sensor: Rationale, definitions, and examples," Control Eng. Practice, vol. 1, no. 2, pp. 585-610, 1993.
34. D.W. Clarke, "Sensor, actuator, and loop validation," IEE Control Syst., vol. 15, pp. 39-45, Aug. 1995.
35. A.T. van Zanten, R. Erhardt, K. Landesfeind, and G. Pfaff, "VDC systems development and perspective," SAE Technical Paper Series, no. 980235, in Electronic Braking, Traction, and Stability Control, R.K. Jurgen, Ed. Warrendale, PA: Society of Automotive Engineers, SAE: PT: PT-76, pp. 373-394, 1999.
36. R.N. Clark, "State estimation schemes for instrument fault detection," in Fault Diagnosis in Dynamic Systems, R.J. Patton, J. Chen, and R.N. Clark, Eds. New York: Prentice-Hall, 1989.
37. R. Oehler, A. Schoenhoff, and M. Schreiber, "Online model-based fault detection and diagnosis for a smart aircraft actuator," in Proc. IFAC Symp. Fault Detection, Supervision and Safety for Technical Processes (SAFEPROCESS), vol. 2. Kingston upon Hull, U.K., 1997, pp. 591-596.
38. A. Krantstrunk and P. Mutschler, "Remedial strategy for a permanent magnet synchronous motor drive," in Proc. EPE'99, Lausanne, Switzerland, 1999.
39. R. Isermann and U. Raab, "Intelligent actuators-Ways to autonomous actuating systems," Automatica, vol. 29, no. 5, pp. 1315-1331, 1993.
40. G. Heiner and T. Thurner, "Time-triggered architecture for safety related distributed real-time systems in transportation systems," in Fault-Tolerant Computing (FTCD 28), Munich, Germany, 1998.
41. H. Kopetz, Real-Time Systems. Boston, MA: Kluwer, 1997.
42. "X-by-wire, safety related fault-tolerant systems in vehicles," Final report of EU Project Brite-EuRam III, 3.B.5, 3.B.6, Prog. no. BE 95/1329, Contract BRPR-CT95-0032, 1998.
43. S. Poledna and G. Kroiss, "TTD: Towards drive-by-wire," Elektonik, no. 14, pp. 36-43, 1999.
44. T. Pfeufer, "Model-based fault detection and diagnosis for an automotive actuator" (in German), Düsseldorf, Germany, VDI-Verlag, Fortschr.-Ber. VDI Reihe 8, no. 764, 1999.
45. R. Schwarz, R. Isermann, J. Böhm, J. Nell, and P. Rieth, "Modeling and control of an electro-mechanical disk brake," SAE Technical Paper Series, vol. SP-1339, no. 980600 pp. 177-189, 1998.
46. R. Schwarz, "Rekonstruktion der Bremskraft bei Fahrzeugen mit elektromechanisch betätigten Radbremsen," Düsseldorf, Germany, VDI-Verlag, Fortschr.-Ben VDI Reihe 12, no. 393, 1999.
47. S. Stölzl, R. Schwarz, R. Isermann, J. Böhm, J. Nell, and P. Rieth, "Control and supervision of an electromechanical brake system," in FISITA World Automotive Congr., 2nd Century of the Automobile, Paris, France, 1998, pp. 154-155.
48. J. Balz, K. Bill, J. Böhm, P. Scheerer, and M. Semsch, "Advanced brake system with highest flexibility," Automobiltechnische Zeitschrift, vol. 98, no. 6, pp. 328-333, 1996.