Contribution of particle structure to the viscosity of SiO2 particle-filled epoxy resin composite systems

Advanced Powder Technology

Volumn 12, Issue 1, 2001, Pages 17-31

  Takao, Yasumasa ^a   Naito, Makio ^b   Kamiya, Hidehiro ^c  

^a NATIONAL INSTITUTE OF ADVANCED INDUSTRIAL SCIENCE AND TECHNOLOGY AIST   (Japan)

^b JAPAN FINE CERAMICS CENTER   (Japan)

^c TOKYO UNIVERSITY OF AGRICULTURE AND TECHNOLOGY   (Japan)

Author keywords

Composite particle; Epoxy; Optical microscopy; Particle agglomeration; SiO2; Viscosity

Indexed keywords

AGGLOMERATION; EPOXY RESINS; OPTICAL MICROSCOPY; OPTICAL PROPERTIES; RHEOLOGY; SILICA; STRUCTURE (COMPOSITION); VISCOSITY;

COMPOSITE PARTICLE; OPTICAL ANISOTROPY; PARTICLE AGGLOMERATION; SIZE DISTRIBUTION;

PARTICLES (PARTICULATE MATTER);

EID: 0035043513     PISSN: 09218831     EISSN: None     Source Type: Journal    
DOI: 10.1163/156855201744930     Document Type: Article

References (41)

1. Y. Otsubo, M. Sekine and S. Katayama, Effect of adsorbed water on the electrorheology of silica suspensions, J. Colloid Interface Sci. 150, 324-330 (1992).
2. S. W. Shang, J. W. Williams and K.-J. M. Soderholm, Work of adhesion influence on the rheological properties of silica filled polymer composites, J. Mater. Sci. 30, 4323-4334 (1995).
3. S. Nakajima, Electrical insulating filler, Filler 3, 160-167 (1998).
4. T. K. Gupta and J. H. Jean, Principles of the development of a silica dielectric for microelectronics packaging, J. Mater. Res. 11, 243-263 (1999).
5. M. K. McMurray and S. Amagi, The effect of time and temperature on flexural creep and fatigue strength of a silica particle filled epoxy resin, J. Mater. Sci. 34, 5927-5936 (1999).
6. P. E. Wayne-Lougher, Ceramic application in chemical mechanical planarization, Am. Ceram. Soc. Bull. 78, 97-100 (1999).
7. H. Homma, Application of polymeric insulation materials for electric power facilities, Bull. Inst. Elect. Engng, Japan 120, 152-155 (2000).
8. K. Otsuka, Rheology on fine ceramics, Bull. Ceram. Soc., Japan 28, 1124-1129 (1993).
9. T. Kitano, Rheological properties of filler-polymer slurry, Filler 3, 96-107 (1998).
10. K. K. Unger, Surface structure of amorphous and crystalline porous silicas, in: The Colloid Chemistry of Silica, H. E. Bergne (Ed.), pp. 165-181. American Chemical Society, Washington, DC (1994).
11. K. Takahashi, Spherical silica filler, Kogyozairyo 42 (15), 112-116 (1994).
12. H. Liao and T. W. Coyle, Effects of organotitanate additions on the dispersion of aluminum nitride in nonpolar solvents, J. Am. Ceram. Soc. 78, 1291 (1995).
13. Y. Nagai and G. Lai, Thermal conductivity of epoxy resin filled with particulate aluminum nitride powder, J. Ceram. Soc., Japan 105, 197-200 (1997).
14. Y. Yoshida, T. Higashihara, Y. Nomura, E. Usui and S. Hibi, The effect of silane agent on tensile and bending properties of silica filled epoxy after water absorption by boiling, Trans. IEE, Japan 117-A, 1004-1012 (1997).
15. S. Hagiwara, Trend of package material of semiconductor device, Plastics 49, 58-62 (1998).
16. T. Yoshida, Application of silicon technology for package material of semiconductor device, Plastics 49, 63-67 (1998).
17. T. Takei, M. Ataku, T. Konishi, M. Fuji, T. Watanabe and M. Chikazawa, Investigation of the structure of surface hydroxyl groups on silica - chemical reaction and molecular adsorption method, J. Soc. Powder Technol., Japan 36, 179-184 (1999).
18. M. Fuji and M. Chikazawa, Reactivity to water and alcohol of siloxane formed by heat-treatment on silica powder surface, J. Soc. Powder Technol., Japan 37, 19-25 (2000).
19. H. Kamiya, M. Mitsui, S. Miyazawa and H. Takano, Influence of particle diameter on surface silanol structure, hydration forces and aggregation behavior of alkoxide derived silica particles, J. Am. Ceram. Soc. 83, 287-293 (2000).
20. K. Umeya, Rheological studies on slurry materials - on the hardening and softening properties of suspending systems, Bull. Ceram. Soc., Japan 28, 1115-1123 (1993).
21. H. Usui, Rheological model for agglomerative slurry of mono-modal silica particles, Kagaku Kogaku Ronbunshu 25, 459-465 (1999).
22. H. Sano and T. Komoto, Transmission electron microscopy for polymeric materials, Electron Microsc. 32, 71-76 (1997).
23. K. Uematsu, Immersion microscopy for detailed characterization of defects in ceramic powders and green bodies, Powder Technol. 88, 291-298 (1996).
24. K. Uematsu, S. Ohsaka, N. Shinohara and M. Okumiya, Grain-oriented microstructure of alumina ceramics made through the injection molding process, J. Am. Ceram. Soc. 80, 1313-1315 (1997).
25. M. Naito, T. Hotta, O. Hayakawa, N. Shinohara, M. Okumiya and K. Uematsu, New characterization techniques to control the manufacturing process of fine ceramics; a case study of the origin of property variation with spray dryer size, in: Advances in Process Measurements for the Ceramic Industry, A. Jillavenkatesa and G. Y. Onoda (Eds), pp. 87-105. American Ceramic Society, OH (1999).
26. N. Shinohara, M. Okumiya, T. Hotta, K. Nakahira, M. Naito and K. Uematsu, Formation mechanism of processing defects and their relevance to the strength in alumina ceramics made by powder compaction process, J. Mater. Sci. 34, 4271-4277 (1999).
27. Y. Takao, T. Hotta, K. Nakahira, M. Naito, N. Shinohara, M. Okumiya and K. Uematsu, Processing defects and their relevance to strength in alumina ceramics made by slip casting, J. Eur. Ceram. Soc. 20, 389-395 (2000).
28. Y. Takao and M. Naito, Particle aggregated structure in silica particle filled epoxy resin composite system, J. Chem. Engng, Japan 33, 317-322 (2000).
29. S. Okuda, Functional polymeric materials filled with fine particles, J. Soc. Mat. Sci., Japan 39, 1054-1060 (1990).
30. A. Kato, Improvement of chemical processing in synthesis of ceramic materials, Bull. Ceram. Soc., Japan 26, 187-190 (1991).
31. M. Naito, A. Kondo and T. Yokoyama, Application of comminution techniques for the surface modification of powder materials, ISIJ Int. 33, 915-924 (1993).
32. M. Sando, Composite particle by nano-scale coating, Bull. Ceram. Soc., Japan 31, 185-187 (1996).
33. 7-x by electrostatic adhesion process, AIChE J. 43, 2616-2623 (1997).
34. M. Naito, T. Hotta, S. Asahi, T. Tanimoto and S. Endoh, Effect of processing condition on particle composite process by a high-speed elliptical-rotor-type mixer, Kagaku Kogaku Ronbunshu 24, 99-103 (1998).
35. 2 multilayered gas sensor with high selectivity prepared by an aerosol electrostatic process, Adv. Powder Technol. 9, 293-316 (1998).
36. M. Naito, T. Hotta, T. Tanimoto, S. Endoh and K. Nogi, Effect of fine particle size on particle composite process by a high-speed elliptical-rotor-type mixer, Kagaku Kogaku Ronbunshu 26, 62-67 (2000).
37. G. Wegner, Functional polymers, Acta Mater. 48, 253-262 (2000).
38. C. H. Hung and J. L. Katz, Formation of mixed oxide powders in flames, J. Mater. Res. 7, 1861-1869 (1992).
39. M. Iwasa, Y. Sakaguchi and H. Torizoe, Japanese Patent no. H10-95607.
40. S. Naito, Y. Iizuka and M. Iwasa, Japanese Patent no. H11-60234.
41. Y. Takao, M. Naito, T. Tatsumi and T. Sakurai, Particulate structural contribution to viscosity of aluminum nitride (AlN) particle filled epoxy resin composite system, Trans. Ceramic Powder Processing Sci. 7, in press (2000).