메뉴 건너뛰기




Volumn 1997-W, Issue , 1997, Pages 3-12

TOWARDS PREDICTIVE MODELING AND OPTIMIZATION OF MACHINING OPERATIONS

Author keywords

[No Author keywords available]

Indexed keywords

GAS TURBINES; SURFACE ROUGHNESS;

EID: 85111663151     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE1997-1129     Document Type: Conference Paper
Times cited : (17)

References (52)
  • 1
    • 0026953263 scopus 로고
    • The Optimization of Machining Operation.s Based on a Combined Criterion: Part 1 - The Use of Combined Objectives in Single-Pass CIperations
    • Agapiou, J. S., 1992, “The Optimization of Machining Operation.s Based on a Combined Criterion: Part 1 - The Use of Combined Objectives in Single-Pass CIperations,” ASME Journal of Engineeringfor Indualry, Vol. 114, pp. 500-507.
    • (1992) ASME Journal of Engineeringfor Indualry , vol.114 , pp. 500-507
    • Agapiou, J. S.1
  • 2
    • 84995988350 scopus 로고
    • New Developments in the Theory of the Metal-Cutting Process: Part 1 - The Ploughing Process in Metal Cutting
    • Albrecht, P., 1960, “New Developments in the Theory of the Metal-Cutting Process: Part 1 - The Ploughing Process in Metal Cutting," Transactions ofASME. pp. 348-358.
    • (1960) Transactions ofASME , pp. 348-358
    • Albrecht, P.1
  • 5
    • 0021630349 scopus 로고
    • Predictive Mixlels for Drilling Thrust and Torque - A Comparison of Three Flank Configurations
    • Annarego, E. J. A., and J. I). Wright, 1984, “Predictive Mixlels for Drilling Thrust and Torque - A Comparison of Three Flank Configurations,” Annals ofthe CIRP, Vol. 33, pp. 5-10.
    • (1984) Annals ofthe CIRP , vol.33 , pp. 5-10
    • Annarego, E. J. A.1    Wright, J. I).2
  • 6
    • 0021896866 scopus 로고
    • Computer Based Modelling of Popular Machining Operations for Force and Power Prediction
    • Annarego, E. J. A., and R. C. Whitfield, 1985, “Computer Based Modelling of Popular Machining Operations for Force and Power Prediction,” Annals of the CIRP, Vol. 34 (1), pp. 65-69.
    • (1985) Annals of the CIRP , vol.34 , Issue.1 , pp. 65-69
    • Annarego, E. J. A.1    Whitfield, R. C.2
  • 9
    • 0030267247 scopus 로고    scopus 로고
    • Prediction of Tool Life in Oblique Machining with Nose Radius Tools
    • Arsecularatne, J. A., R. F. Fowle, P. Mathew and P. L. B. Oxley, 1996, “Prediction of Tool Life in Oblique Machining with Nose Radius Tools,” Wear, Vol. 198, pp. 220-228.
    • (1996) Wear , vol.198 , pp. 220-228
    • Arsecularatne, J. A.1    Fowle, R. F.2    Mathew, P.3    Oxley, P. L. B.4
  • 10
    • 0030290379 scopus 로고    scopus 로고
    • An Analytical Evaluation of the Cutting Forces in Self-Piloting Drilling Using the Mcxlel of Shear Zone with Parallel Boundaries. Part 1: Theory
    • Astakhov, V. P., and M. O. M. Osman, 1996, “An Analytical Evaluation of the Cutting Forces in Self-Piloting Drilling Using the Mcxlel of Shear Zone with Parallel Boundaries. Part 1: Theory,” International Journal of Machine Tools and Manufacture, Vol. 36 (2), pp. 1187-1200.
    • (1996) International Journal of Machine Tools and Manufacture , vol.36 , Issue.2 , pp. 1187-1200
    • Astakhov, V. P.1    Osman, M. O. M.2
  • 12
    • 0013163002 scopus 로고    scopus 로고
    • A Calibration Procedure for Fundamental Oblique-Cutting Model Coefficients Based on a Three-Dimensional Mechanistic Drilling Force Model
    • Chandrasekharan, V., S. G. Kapoor and R. E. DeVor, 1997, “A Calibration Procedure for Fundamental Oblique-Cutting Model Coefficients Based on a Three-Dimensional Mechanistic Drilling Force Model,” Transactions ofNAMRI, Vol. XXV, pp. 255-260.
    • (1997) Transactions ofNAMRI , vol.XXV , pp. 255-260
    • Chandrasekharan, V.1    Kapoor, S. G.2    DeVor, R. E.3
  • 13
    • 0029425523 scopus 로고
    • Optimum Machining Perfonnance in Finish Turning with Complex Grooved Tixils
    • ASME, MED-Vol. 2-1/MH-Vol
    • Da, Z. J., J. P. Sadler, X. D. Fang and I. S. Jawahir, 1995, “Optimum Machining Perfonnance in Finish Turning with Complex Grooved Tixils,” Manufacturing Science and Engineering, ASME, MED-Vol. 2-1/MH-Vol. 3-1, pp. 703-714.
    • (1995) Manufacturing Science and Engineering , vol.3-1 , pp. 703-714
    • Da, Z. J.1    Sadler, J. P.2    Fang, X. D.3    Jawahir, I. S.4
  • 14
    • 0003035130 scopus 로고    scopus 로고
    • Predicting Optimum Cutting Conditions for Turning Operations at varying Ttwl-wear States
    • Da, Z. J., J. P. Sadler and I. S. Jawahir, 1997, “Predicting Optimum Cutting Conditions for Turning Operations at varying Ttwl-wear States,” Transactions of NAMRI, Vol. XXV, pp. 75-80.
    • (1997) Transactions of NAMRI , vol.XXV , pp. 75-80
    • Da, Z. J.1    Sadler, J. P.2    Jawahir, I. S.3
  • 15
    • 0029210558 scopus 로고
    • Mathematical Model for the Establishment of the Materials Machinability
    • Enache, S., E. Strajescu, C. Opran, C. Minciu and M. Zamfirache, 1995, “Mathematical Model for the Establishment of the Materials Machinability,” Annals ofthe CIRP, Vol. 44(1), pp. 79-82.
    • (1995) Annals ofthe CIRP , vol.44 , Issue.1 , pp. 79-82
    • Enache, S.1    Strajescu, E.2    Opran, C.3    Minciu, C.4    Zamfirache, M.5
  • 16
    • 0027884765 scopus 로고
    • A Dual Mechanism Approach to the Prediction of Machining Forces: Part 1 - Model Development and Calibration
    • Endres, W. J., R. E. DeVor and S. G. Kapoor, 1993 a, “A Dual Mechanism Approach to the Prediction of Machining Forces: Part 1 - Model Development and Calibration,” PEI), MSE, ASME, Vol. 64, pp. 563-579.
    • (1993) PEI), MSE, ASME , vol.64 , pp. 563-579
    • Endres, W. J.1    DeVor, R. E.2    Kapoor, S. G.3
  • 17
    • 0028407979 scopus 로고
    • Predicting Total Machining Performance in Finish Turning Using Integrated Fuzzy-set Models of the Machinability Parameters
    • Fang, X. D., and I. S. Jawahir, 1994, “Predicting Total Machining Performance in Finish Turning Using Integrated Fuzzy-set Models of the Machinability Parameters,” International Journal of Production Research, Vol. 32 (4), pp. 833-849.
    • (1994) International Journal of Production Research , vol.32 , Issue.4 , pp. 833-849
    • Fang, X. D.1    Jawahir, I. S.2
  • 18
    • 0029706779 scopus 로고    scopus 로고
    • An Analytical Model for Cyclic Chip Formation in 2-D Machining with Chip Breaking
    • 1)., and
    • Fang, X. 1)., and I. S. Jawahir, 1996, “An Analytical Model for Cyclic Chip Formation in 2-D Machining with Chip Breaking,” Annals ofthe CIRP. Vol. 45 (1), pp. 53-58.
    • (1996) Annals ofthe CIRP , vol.45 , Issue.1 , pp. 53-58
    • Fang, X.1    Jawahir, I. S.2
  • 19
    • 0012167461 scopus 로고
    • Review of the Metal Cutting Analysis of the Past Hundred Years
    • Finnie, I., 1956, “Review of the Metal Cutting Analysis of the Past Hundred Years," Mechanical Engineering, Vol. 78(8), pp. 715-721.
    • (1956) Mechanical Engineering , vol.78 , Issue.8 , pp. 715-721
    • Finnie, I.1
  • 20
    • 0027840170 scopus 로고
    • A Force Mmlel for Chip Breaking in Orthogonal Machining
    • Ganapathy, K. K.. and I. .S. Jawahir, 1993, “A Force Mmlel for Chip Breaking in Orthogonal Machining,” PEI), MSE, ASME, Vol. 64. pp. 461-474.
    • (1993) PEI), MSE, ASME , vol.64 , pp. 461-474
    • Ganapathy, K. K.1    Jawahir, I. .S.2
  • 22
    • 0019316468 scopus 로고
    • A Machining Theory for Predicting Chip geometry. Cutting Forces, etc., from Work Material Properties and Cutting Conditions
    • London
    • Hastings, W. F., P. Mathew and P. L. B. Oxley, 1980, “A Machining Theory for Predicting Chip geometry. Cutting Forces, etc., from Work Material Properties and Cutting Conditions,” Proceeding.s ofRoyal Society, London, Vol. A371, pp. 569-587.
    • (1980) Proceeding.s ofRoyal Society , vol.A371 , pp. 569-587
    • Hastings, W. F.1    Mathew, P.2    Oxley, P. L. B.3
  • 23
    • 0027884543 scopus 로고
    • Recent Developments in Chip Control Research and Applications
    • Jawahir, I. S., and C. A. van Luttervelt, 1993, “Recent Developments in Chip Control Research and Applications,” Keynote Paper, Annals ofthe CIRP, Vol. 42 (2), pp. 659-685.
    • (1993) Keynote Paper, Annals ofthe CIRP , vol.42 , Issue.2 , pp. 659-685
    • Jawahir, I. S.1    van Luttervelt, C. A.2
  • 24
    • 0026929754 scopus 로고
    • On the Interrelationships of Some Machinability Parameters in Finish Turning with Cennet Chip Forming Tail Inserts
    • Jawahir. I. S., N. Qureshi and J. A. Arsecularatne, 1992, “On the Interrelationships of Some Machinability Parameters in Finish Turning with Cennet Chip Forming Tail Inserts,” International Journal ofMachine Tools and Manufacture, Vol. 32(5). pp. 709-723.
    • (1992) International Journal ofMachine Tools and Manufacture , vol.32 , Issue.5 , pp. 709-723
    • Jawahir., I. S.1    Qureshi, N.2    Arsecularatne, J. A.3
  • 25
    • 0029237422 scopus 로고
    • A New Parametric Approach for the Assessment of Comprehensive Tail-wear in Coated Grooved Tails
    • 5
    • Jawahir, I. S., P. X. Li, R. Ghosh and E. L. Exner, 1995, “A New Parametric Approach for the Assessment of Comprehensive Tail-wear in Coated Grooved Tails.” Annals if the CIRP, Vol. 4.5 (1), pp. 49-54.
    • (1995) Annals if the CIRP , vol.4 , Issue.1 , pp. 49-54
    • Jawahir, I. S.1    Li, P. X.2    Ghosh, R.3    Exner, E. L.4
  • 26
    • 0012207527 scopus 로고
    • Machinability Data Requirements for Advanced Machining Systems
    • Kahles, J. F., 1987, “Machinability Data Requirements for Advanced Machining Systems,” CIRP Technical Report, Annuls of the CIRP, Vol. 36 (2), pp. 523-529.
    • (1987) CIRP Technical Report, Annuls of the CIRP , vol.36 , Issue.2 , pp. 523-529
    • Kahles, J. F.1
  • 28
    • 0004633255 scopus 로고    scopus 로고
    • Machinability Testing in the 21st Century - Integrated Machinability Testing Concept
    • (Ed. E. Kuljanic), CISM Courses and Lecture 372, Springer Verlag, Wien, New York
    • Kuljanic, E., 1996, “Machinability Testing in the 21st Century - Integrated Machinability Testing Concept,” Advanced Manufacturing Systems and Technology, (Ed. E. Kuljanic), CISM Courses and Lectures No. 372, Springer Verlag, Wien, New York, pp. 23-36.
    • (1996) Advanced Manufacturing Systems and Technology , pp. 23-36
    • Kuljanic, E.1
  • 29
    • 0017025238 scopus 로고
    • The Mechanical State of the Sublayer of a Surface Generated by Chip-removal Process, Part 2: Cutting with a Tool with Flank Wear
    • Liu, C. R., and M. M. Barash, 1976, “The Mechanical State of the Sublayer of a Surface Generated by Chip-removal Process, Part 2: Cutting with a Tool with Flank Wear,” ASME Journal of Engineering for Industry, pp. 1203-1208.
    • (1976) ASME Journal of Engineering for Industry , pp. 1203-1208
    • Liu, C. R.1    Barash, M. M.2
  • 30
    • 0000813486 scopus 로고
    • Mechanics of the Metal Cutting Process. H. Plasticity Conditions in Orthogonal Cutting
    • Merchant, M. E., 1945, “Mechanics of the Metal Cutting Process. H. Plasticity Conditions in Orthogonal Cutting," Journal of Applied Physics, Vol. 16, pp. 318-324.
    • (1945) Journal of Applied Physics , vol.16 , pp. 318-324
    • Merchant, M. E.1
  • 32
    • 0004484417 scopus 로고
    • Chip Curl in Metal Cutting Process
    • Yokohama National University
    • Nakayama, K., 1962, “Chip Curl in Metal Cutting Process," Bull. Faculty Engg., Yokohama National University, Vol. 11, PP- 1-13.
    • (1962) Bull. Faculty Engg , vol.11 , pp. 1-13
    • Nakayama, K.1
  • 33
    • 0043223159 scopus 로고
    • Predicting Cutting Forces, Tail Life, etc.. Using Work Material Flow Stress Propertie.s Obtained from High Speed Compression Tests
    • Tokyo, ‘)34
    • Oxley, P. L. B., W. F. Hastings and M. G. .Stevenson, 1974, “Predicting Cutting Forces, Tail Life, etc.. Using Work Material Flow Stress Propertie.s Obtained from High Speed Compression Tests," In: Proceedings of International Conference of Production Engineering, Tokyo, pp. .528-.‘)34.
    • (1974) Proceedings of International Conference of Production Engineering , pp. 528
    • Oxley, P. L. B.1    Hastings, W. F.2    Stevenson, M. G. .3
  • 34
    • 0022277726 scopus 로고
    • Modelling Machining Processes with a View to their Optimization and to the Adaptive Control of Metal Cutting Tails
    • (/2)
    • Oxley, P. L. B., 1988, “Modelling Machining Processes with a View to their Optimization and to the Adaptive Control of Metal Cutting Tails,” Robotics & Computer-Integrated Manufacturing, Vol. 4 (1/2), pp. 103-119.
    • (1988) Robotics & Computer-Integrated Manufacturing , vol.4 , Issue.1 , pp. 103-119
    • Oxley, P. L. B.1
  • 37
    • 0013009426 scopus 로고
    • Oxford University Press, New York
    • Shaw. M. C.. 1984, Metal Cutting Principles, Oxford University Press, New York.
    • (1984) Metal Cutting Principles
  • 39
    • 0030384799 scopus 로고    scopus 로고
    • Chip Breaking Analysi.s from the Viewpoint of the Optimum Cutting Tend Geometry Design
    • Shinozuka, L, T. Obikawa and T. Shirakashi, 1996, “Chip Breaking Analysi.s from the Viewpoint of the Optimum Cutting Tend Geometry Design,” Journal of Materials Processing Technology, Vol. 62, pp. 345-351.
    • (1996) Journal of Materials Processing Technology , vol.62 , pp. 345-351
    • Shinozuka, L1    Obikawa, T.2    Shirakashi, T.3
  • 40
    • 0000353022 scopus 로고
    • New Trend on Machining Theory - Way to Computational Machitiing
    • Shirakashi, T., 1993, “New Trend on Machining Theory - Way to Computational Machitiing,” Journal of Japanese Society of Precision Engineering, Vol. 27 (4), pp. 299-302.
    • (1993) Journal of Japanese Society of Precision Engineering , vol.27 , Issue.4 , pp. 299-302
    • Shirakashi, T.1
  • 41
    • 0026157025 scopus 로고
    • An Overview of Modelling and Simulation of the Milling Process
    • 5
    • Smith, S., and J. Tlusty, 1991, “An Overview of Modelling and Simulation of the Milling Process,” ASME Journal of Engineering for Industry, Vol. 113 (2), pp. 169-17.5.
    • (1991) ASME Journal of Engineering for Industry , vol.113 , Issue.2 , pp. 169-17
    • Smith, S.1    Tlusty, J.2
  • 43
    • 0031199097 scopus 로고    scopus 로고
    • A Further Study on the Correlation of Workpiece Mechanical Properties from Compression and Cutting Tests
    • (to be published)
    • Stevenson, R., 1997, “A Further Study on the Correlation of Workpiece Mechanical Properties from Compression and Cutting Tests,” Journal ofMachining Science and Technology, Vol. 1(1), (to be published).
    • (1997) Journal ofMachining Science and Technology , vol.1 , Issue.1
    • Stevenson, R.1
  • 45
    • 0017896552 scopus 로고
    • Analytical Prediction of Three Dimensional Cutting Proces.s - Part 3: Cutting Temperature ami Crater Wear of Carbide Tail
    • Usui, E., T. Shirakashi and T. Kitagawa, 1978, “Analytical Prediction of Three Dimensional Cutting Proces.s - Part 3: Cutting Temperature ami Crater Wear of Carbide Tail,” ASME Journal of Engineeringfor Industry, Vol. 100, pp. 236-243.
    • (1978) ASME Journal of Engineeringfor Industry , vol.100 , pp. 236-243
    • Usui, E.1    Shirakashi, T.2    Kitagawa, T.3
  • 46
    • 0021645416 scopus 로고
    • Analytical Prediction of Cutting Tool Wear
    • Usui, E., T. Shirakashi and T. Kitagawa, 1984, “Analytical Prediction of Cutting Tool Wear,” Wear, Vol. 100, pp. 129-151.
    • (1984) Wear , vol.100 , pp. 129-151
    • Usui, E.1    Shirakashi, T.2    Kitagawa, T.3
  • 47
    • 0002802092 scopus 로고
    • Progress of “Predictive” Theories in Metal Cutting
    • Usui, E., 1988, “Progress of “Predictive” Theories in Metal Cutting,” JSME International Journal, Series ID, Vol. 31 (2), pp. 303-309.
    • (1988) JSME International Journal, Series ID , vol.31 , Issue.2 , pp. 303-309
    • Usui, E.1
  • 48
    • 85127042276 scopus 로고    scopus 로고
    • Achieving Precision Requirements, A Challenge for bitelligent Machining Systems
    • May 27, University of Kentucky
    • van Luttervelt, C. A., 1997, “Achieving Precision Requirements, A Challenge for bitelligent Machining Systems,” Research Seminar, May 27, University of Kentucky.
    • (1997) Research Seminar
    • van Luttervelt, C. A.1
  • 49
    • 0030109759 scopus 로고    scopus 로고
    • Three-dimensional Cutting Force Analysis Based on the Diwer Boundary of the Shear Zone. Part I: Two Edge Oblique Cutting
    • Venuvinal, P. K., 1996, “Three-dimensional Cutting Force Analysis Based on the Diwer Boundary of the Shear Zone. Part I: Two Edge Oblique Cutting,” International Journal ofMachine Tools and Manufacture, Vol. 36 (3), pp. 325-338.
    • (1996) International Journal ofMachine Tools and Manufacture , vol.36 , Issue.3 , pp. 325-338
    • Venuvinal, P. K.1
  • 52
    • 0020706343 scopus 로고
    • Adaptive Control in Machining - A New Approach Based on the Physical Constraints of Tail Wear Mechanisms
    • Yen, I). W., and P. K. Wright, 1983, “Adaptive Control in Machining - A New Approach Based on the Physical Constraints of Tail Wear Mechanisms,” ASME Journal of Engineering for Industry, Vol. 105 (1), pp. 31-38.
    • (1983) ASME Journal of Engineering for Industry , vol.105 , Issue.1 , pp. 31-38
    • Yen, I). W.1    Wright, P. K.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.