New trends in non-destructive evaluation in relation to the smart materials concept

International Journal of Systems Science

Volumn 31, Issue 11, 2000, Pages 1351-1359

  Gobin, P F ^a   Jayet, Y ^a   Baboux, J C ^a   Salvia, M ^b   Chateauminois, A ^b   Abry, J C ^b   Giraud, G ^c  

^a UNIVERSITÉ DE LYON   (France)

^b ECOLE CENTRALE DE LYON   (France)

^c CNRS   (France)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITE MATERIALS; ELECTRIC CONDUCTIVITY; PIEZOELECTRIC MATERIALS; STRUCTURAL ANALYSIS;

PIEZOELECTRIC IMPLANT TECHNIQUE;

NONDESTRUCTIVE EXAMINATION;

EID: 0034334886     PISSN: 00207721     EISSN: 14645319     Source Type: Journal    
DOI: 10.1080/00207720050197749     Document Type: Article

References (49)

1. Abry, J. C., Bochard, S., Chateauminois, A., Salvia, M., and Giraud, G., 1997, In situ monitoring in CFRP laminates by electrical resistance measurements. In: Y. Murotsu, C. A. Rogers, P. Santini, H. Okubo (eds) 8th International Conference on Adapt. Struct., Wakayama, pp. 184-192.
2. Abry, J. C., Bochard, s., Chateauminois, a., Salvia, M., and Giraud, G., 1998, In situ detection of damage in CFRP laminates by electrical resistance measurements. Composites Science and Technology 59, pp. 925-935.
3. Arjyal, B., and Galiotis, C., 1996, Application of a laser raman sensor for stress monitoring. In: P. F. Gobin and J. Tatibouet (eds) 3rd International Conference on Intelligent Materials, Lyon, Vol. SPIE 2779, pp. 142-145.
4. Badcock, R. A., and Fernando, G. F., 1995, Fatigue damage detection in carbon fibre reinforced composites using an intensity based optical fibre sensor. In: W. B. Spillman (ed) Smart Structures and Materials SPIE, Vol. 2444, pp. 422-431.
5. Buckley, L. J., and Neumeister, G. C., 1992, Fibre optic strain measurements using an optically-active polymer. Smart Mat. Struct., 1, 1-4.
6. Carrere, P., and Lamon, j., 1997, Cyclic fatigue behavior at high temperature of a ceramic composite with a self-healing matrix. Int. Conf. on Fatigue of Composites, Paris, pp. 74-81.
7. Ceysson, O., Salvia, M., and Vincent, L., 1995, In situ detection and identification of damage mechanisms in CFRP by both electrical resistance measurements and acoustic emission analysis. In: 10th International Conference on Composite Materials, Vancouver, Vol. V, pp. 381-388.
8. Chailleux, E., Salvia, M., Jaffrezic, N., Jayet, Y., and Seytre, G., 1998, Processing monitoring of FRP by multidetection techniques (to appear).
9. Chen, P.-W., and Chung, D. D. L., 1993, Carbon fibre reinforced concrete for smart structures capable of non-destructive flaw detection. Smart Mat. Struct., 2, 22-30.
10. Cheng, S. J., Timm, D. C., Lu, Y., Shaikh, N., and Ianno, N. J., 1995, Smart structural composites with monofilament piezoelectric sensors. J. Intelligent Mat. Syst. and Structures, 6, 436-442.
11. Chiu, W. K., Galea, S. C., Zhang, H., Jones, R., and Lam, Y. C., 1994, The use of piezoelectric thin film sensors for structural integrity monitoring. J. Intelligent Mat. Syst. and Structures, 5, 683-694.
12. Crosby, P. a., Powell, G. R., Fernando, G. F., France, C. M., Spooncer, R. C., and Waters, D. N., 1996, In situ cure monitoring of epoxy resins using optical fibre sensors. Smart Mat. Struct., 5, 415-428.
13. Delebarre, C., Blanquet, p., Demol, T., Moulin, E., and Assad, J., 1997, Health monitoring of carbon epoxy composite aeronautic structures using embedded lamb waves piezoelectric array devices. In: First Japan-France Seminar on Intelligent Materials and Structures, Sendai, pp. 5-14.
14. Dorighi, J., Krishnaswamy, S., and Achenbach, J. D., 1995, Stabilisation of an embedded fibre optic Fabry-Pisrot sensor for ultrasound detection. IEEE Trans. Ultrason., Ferroelec. and Frequency Control, UFFC-42, 820-824.
15. Doyle, C., Martin, a., Liu, T., Wu, M., Hayes, s., Crosby, P. a., Powell, G. R., Brooks, D., and Fernando, G. F., 1998, In-situ process and conditions monitoring of advanced fibre-reinforced composite materials using optical fibre sensors. Smart Mat. Struct. 7, 145-158.
16. Dry, C., 1994, Timed release of chemicals in cementitious material after the material has hardened to repair cracks, rebond fibres, and increase flexural toughening. Fracture Mechanics, 25th Vol. (Philadelphia: ASTM. STP 1220).
17. Elster, J. L., Tran, T. a., Barnes, a. E., Coate, J., Gunther, M. F., May, R. G., and Clauss, R. O., 1996, High-temperature fibre optic strain sensor in fatigue loading conditions. Smart Structures and Materials SPIE, 2718, 20-26.
18. Feng, M. Q., Suzuki, H., and Yokoi, I., 1995, Development of optical sensing systems for smart civil infrastructure. Smart. Mater. Struct., 4, 114-120.
19. Fuhr, P. L., Huston, D. R., Ambrose, T. P., and Mowat, E. F., 1995, An internet observatory: remote monitoring of instrumented civil structures using the information superhighway. Smart. Mater. Struct., 4, 14-19.
20. Furuya, Y., 1995, Design and experimental verifications of intelligent materials using shape memory alloys. In: Proceedings of the International Symposium on Microsystems, Intelligent Materials and Robots, Sendai, pp. 313-318.
21. Giurgiutiu, V., Chen, Z., Lalande, F., Rogers, C. a., Quattrone, R., and Berman, j., 1996, Passive and active tagging of glass-fibre polymeric composites for in-process and in-field nondestructive evaluation. J. Intelligent Mat. Syst. Structures, 7, 623-634.
22. Gobin, P. F., Guenin, G., Morin, M., Salvia, M., and Tatibouet, J., 1996, Smart materials: a future for composites. J. Intelligent Mat. Syst. Structures, 7, 353-357.
23. Grando, J., and Salvia, M., 1996, Influence of processing conditions on actuators properties of adaptive hybrid composites. In: P. F. Gobin and J. Tatibouet (eds) 3rd International Conference on Intelligent Materials, Lyon, Vol. SPIE 2779, pp. 530-534.
24. Hawong, J. S., Shimamoto, a., Lee, H. J., and Furuya, Y., 1997, Development of photoelastic experiment model material for Ti-Ni SMA-FRP. Smart Structures and Materials SPIE, 3039, 559-570.
25. Hayes, s., Brooks, D., Liu, T., Vikers, S., and Fernando, G. F., 1996, In-situ self-sensing fibre reinforced composites. Smart Structures and Materials SPIE, 2718, 376-384.
26. Huston, D. R., Fuhr, P. L., Ambrose, T. P., and Barker, D. a., 1994, Intelligent civil structures-activities in Vermont. Smart. Mater. Struct., 3, 129-139.
27. Jayet, Y., and Baboux, J. C., 1997, Monitoring the cycle of life of polymer based composites by an embedded piezoelectric element. In: Y. Murotsu, C. A. Rogers, P. Santini, H. Okubo (eds) 8th International Conference on Adapt. Struct., Wakayama, pp. 177-183.
28. Jayet, Y., Baboux, J. C., and Gobin, P. F., 1998, Portable equipment for in situ health monitoring of materials. In: 4th European Conference on Smart Structures and Materials, 6-8 July, Harrogate, pp. 797-799.
29. Kranbuehl, D., Aandahl, H., Haralampus, N., Newby, W., Hood, D., Boiteux, G., Seytre, G., Pascault, p., Maazouz, A., Gerard, J. F, Sautereau, H, Chailan, J. FLoos, A. C., and MacRae, J. D., 1996, Use of in situ dielectric sensing for intelligent processing and health monitoring. In: P. F. Gobin and J. Tatibouet (eds) Third International Conference on Intelligent Materials, Lyon, Vol. SPIE 2779, pp. 112-117.
30. Lai, L., Carman, G., Chiou, s., Kukucheck, P., and Echternach, D., 1995, Processing monitoring of carbon/phenolic composites using smart sensors. Smart. Mater. Struct., 4, 118-125.
31. May, R. G., Shinpaugh, K. A., Duncan, P. G., Loos, A. C., and Clauss, R. O., 1997, Multifunctional fibre optic sensor for manufacturing of thermoset matrix composite materials. Smart Structures and Materials SPIE, 3044, 244-251.
32. Measures, R. M., 1993, Fibre optic sensing for composites smart structures. Composites Engineering, 3, 715-750.
33. Merzbacher, C. I., Kersey, A. D., and Friebele, E. J., 1996, Fibre optic sensors in concrete structures: a review. Smart. Mater. Struct., 5, 196-208.
34. Michie, c., Culshaw, b., Thursby, G., Konstantaki, m., Turpin, M., Lecot, c., Noharet, b., Lequime, M., Vannotti, p., Vanucci, a., Lang, D., Kalb, p., Davidson, r., Roberts, s., Papadopoulos, p., Ikiadis, a., Chazelas, J., Bonniau, p., Herbst, t., Windisch, a., 1996, Optical fibre sensors for monitoring of structures (OSMOS). Structures and Materials SPIE, 2718, 385- 397.
35. Muto, N., Yanagida, H., Nakatsuji, t., Sugita, m., Ohtsuka, Y., and Arai, y., 1992, Design of intelligent materials with self diagnosing function for preventing fatal fracture. Smart Mat. Struct., 1, 84-90.
36. Okafor, A. c., Chandrashekhara, K., and Jiang, Y. p., 1996, Delamination prediction in composite beams with built-in piezoelectric devices using modal analysis and neural network. Smart. Mater. Struct., 5, 338-347.
37. Perrisin-Fabert, I., and Jayet, y., 1994, Simulated and experimental study of electric impedance of a piezoelectric element in a viscoelastic medium. Ultrasonics, 32, 107-111.
38. Reneker, D. H., Mattice, W. L., Quirk, R.P., and Kim, S. J., 1992, Macromolecular smart materials and structures. Smart Mat. Struct., 1, 84-90.
39. Rutherford, P., Igekami, R., and Shrader, J., 1996, Novel NDE fibre optic corrosion sensor. Smart Structures and Materials SPIE, 2718, 158-169.
40. Schulte, K., and Baron, C., 1989, Load and failure analysis of CFRP laminates by means of electrical resistivity measurements. Composites Science and Technology, 36, 63.
41. Sensharma, P. K., and Haftka, R. T., 1996, Limits of stress reduction in a plate with a hole using piezoelectric actuators. J. Intelligent Mat. Syst. and Structures, 7, 363-371.
42. Thiagarajan, C., Sutherland, I., Tunnicliffe, D., and Irving, P. E., 1994, Electrical potential techniques for damage sensing in composite structure. In: Proc. of the 2nd European Conference on Smart Struct. and Mater., pp. 128-131.
43. Tomlinson, G. R., Worden, K., and Staszewski, W., 1997, Smart Structures and Health Monitoring, 17 ieme Conference Ingenierie des Materiaux pour lAerospatiale, Paris, pp. 6.16.6.
44. Varadan, V. K., Varadan, V. V., and Bao, X. Q., 1996, Integration of interdigital transducers, MEMS and antennas for smart structures. Smart Electronics and MEMS, SPIE 2722, 95-106.
45. Wang, S., and Chung, D. D. L., 1997, Self-monitoring of in silicon carbide whiskers reinforced silicon nitride. Smart Mat. Struct., 6, 199- 203.
46. Wang, X., Ehlers, C., Kissinger, C., Neitzel, M., Lin, Y., and Yiu Wing, 1998a, Sensitivity of piezoelectric wafers to the curing of thermoset resins and thermoset composites. Smart Mat. Struct., 7, 113- 120.
47. Wang, X., Ehlers, C., Kissinger, C., Neitzel, M., Lin, Y., and Yiu Wing, 1998b, Experimental investigation of piezoelectric wafers in monitoring the resin transfer moulding process. Smart Mat. Struct., 7, 121-127.
48. Worden, K., Ball, A. D., and Tomlinson, G. R., 1993, Fault location in a framework structure using neural networks. Smart. Mater. Struct., 2, 189-200.
49. Yoshida, H., Funaki, A., and Yano, s., 1996, On the response and the responsive shape control of environmentally responsive composites with embedded Ti-Ni alloy as effectors. In: P. F. Gobin and J. Tatibouet (eds) Third International Conference on Intelligent Materials, Lyon, Vol. SPIE 2779, pp. 523-529.