Measurements and analysis of load and speed effects on the instantaneous wall heat fluxes in a direct injection air-cooled diesel engine

International Journal of Energy Research

Volumn 24, Issue 7, 2000, Pages 587-604

  Rakopoulos, C D ^a   Mavropoulos, G C ^a   Hountalas, D T ^a  

^a NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

Air cooled; Diesel engine; Instantaneous heat fluxes; Speed and load effects

Indexed keywords

CODES (SYMBOLS); DATA ACQUISITION; HEAT CONDUCTION; HEAT FLUX; HEAT TRANSFER; INTERNAL COMBUSTION ENGINES; PIPE; SENSORS; TEMPERATURE MEASUREMENT; THERMOCOUPLES;

AIR COOLED; ENGINE TRANSIENT TEMPERATURE SIGNALS; FOURIER ANALYSIS; INSTANTANEOUS WALL HEAT FLUXES; SPEED AND LOAD EFFECTS;

DIESEL ENGINES;

DIESEL ENGINE; HEAT FLUX;

EID: 0034195265     PISSN: 0363907X     EISSN: None     Source Type: Journal    
DOI: 10.1002/1099-114X(20000610)24:7<587::AID-ER604>3.0.CO;2-F     Document Type: Article

References (43)

1. Alkidas AC, Cole RM. 1985. Transient heat-flux measurements in a divided-chamber diesel engine. Transactions of the ASME, Journal of Heat Transfer 107:439-444.
2. Alkidas AC, Myers JP. 1982. Transient heat-flux measurements in the combustion chamber of a spark-ignition engine. Transactions of the ASME, Journal of Heat Transfer 104:62-67.
3. Annand WJD. 1963. Heat transfer in the cylinders of reciprocating internal combustion engines. Proceedings of the Institution of Mechanical Engineers 177:973-990.
4. Annand WJD, Ma TH. 1970-71. Instantaneous heat transfer rates to the cylinder head surface of a small compression-ignition engine. Proceedings of the Institution of Mechanical Engineers 185:976-987.
5. Assanis DN. 1989. Effect of combustion chamber insulation on the performance of a low heat rejection diesel engine with exhaust heat recovery. Heat Recovery Systems & CHP 9:475-484.
6. Benson RS, Whitehouse ND. 1979. Internal Combustion Engines. Pergamon: Oxford, UK.
7. Borman G, Nishiwaki K. 1987. Internal-combustion engine heat transfer. Progress in Energy and Combustion Science 13:1-46.
8. Enomoto Y, Furuhama S. 1989. A study of the local heat transfer coefficient on the combustion chamber walls of a four-stroke gasoline engine. Japan Society of Mechanical Engineers International Journal 32:107-114.
9. Ferguson CR. 1986. Internal Combustion Engines. Wiley: New York, USA.
10. French CCJ. 1972. Piston cooling. Paper 720024, Society of Automotive Engineers (American).
11. French, CCJ. 1984. Ceramics in reciprocating internal combustion engines. Paper 841135, Society of Automotive Engineers (American).
12. Han SB, Nae HL, Songyol L. 1997. Analysis of thermal loading in a turbocharged gasoline engine. Paper 970205, Society of Automotive Engineers (American).
13. Heywood JB. 1988. Internal Combustion Engine Fundamentals. McGraw-Hill: New York, USA.
14. Kamel M, Watson N. 1979. Heat transfer in the indirect injection diesel engine. Paper 790826, Society of Automotive Engineers (American).
15. Kamo R, Bryzik W. 1984. Cummins/TACOM advanced adiabatic engine. Paper 840428, Society of Automotive Engineers (American).
16. Keribar R, Morel T. 1987. Thermal shock calculations in I.C. engines. Paper 870162, Society of Automotive Engineers (American).
17. Kouremenos DA, Rakopoulos CD, Hountalas DT. 1989. Computer simulation with experimental validation of the exhaust nitric oxide and soot emissions in divided chamber diesel engines. American Society of Mechanical Engineers-Winter Annual Meeting, San Francisco, California, USA, Proceedings of the Advanced Energy Systems, vol. 10(1):15-28.
18. Kouremenos DA, Rakopoulos CD, Hountalas DT. 1990. Thermodynamic analysis of indirect injection diesel engines by two-zone modelling of combustion. Transactions of the ASME, Journal of Engineering for Gas Turbines and Power 112:138-149.
19. Kouremenos DA, Rakopoulos CD, Mavropoulos GC, Hountalas DT. 1991. Modelling the transient temperature field in the combustion chamber surfaces of internal combustion engines using finite element analysis. Proceedings of the 10th IASTED MIC International Conference, Innsbruck, Austria, 18-21 February. Acta Press, Anaheim, CA, USA, 458-462.
20. Kouremenos DA, Rakopoulos CD, Hountalas DT. 1992. Prechamber and main chamber insulation effects on the performance on an IDI diesel engine coupled to power turbine. Heat Recovery Systems & CHP 12:247-256.
21. Morel T, Wahiduzzaman S, Fort EF. 1988. Heat transfer experiments in an insulated diesel. Paper 880186, Society of Automotive Engineers (American).
22. Mure CR, Rhee KT. 1989. Instantaneous heat transfer over the piston of a motored direct injection-type diesel engine. Transactions of the SAE, Journal of Engines 98:904-918.
23. Myers GE. 1971. Analytical Methods in Conduction Heat Transfer. McGraw-Hill: New York, USA.
24. NANMAC 1997. Temperature Measurement Handbook, vol. VIII. Nanmac Co., Framingham, Massachusetts, USA.
25. Prasad R, Samria NK. 1990. Transient heat transfer analysis in an internal combustion engine piston. Computers & Structures 34:787-793.
26. Rakopoulos CD, 1991. Influence of ambient temperature and humidity on the performance and emissions of nitric oxide and smoke of high speed diesel engines in the Athens/Greece region. Energy Conversion Management 31:447-458.
27. Rakopoulos CD, Giakoumis EG. 1997. Experimental and simulation analysis of the transient operation of a turbo-charged multi-cylinder IDI diesel engine. Energy Research 22:317-331.
28. Rakopoulos CD, Mavropoulos GC. 1996. Study of the steady and transient temperature field and heat flow in the combustion chamber components of a medium speed diesel engine using finite element analyses. Energy Research 20:437-464.
29. Rakopoulos CD, Mavropoulos GC. 1997. Modelling the heat transfer mechanism in the ceramic combustion chamber components of a DI diesel engine. Proceedings of the First Meeting of the Greek Section of the Combustion Institute, Athens, 28-29 November 1997:365-370.
30. Rakopoulos CD, Mavropoulos GC. 1998. Components heat transfer studies in a low heat rejection DI diesel engine using a hybrid thermostructural finite element model. Applied Thermal Engineering 18:301-316.
31. Rakopoulos CD, Mavropoulos GC. 2000. Experimental instantaneous heat fluxes in the cylinder head and exhaust manifold of an air-cooled diesel engine. Energy Conversion Management, in press.
32. Rakopoulos CD, Andritsakis EC, Hountalas DT. 1995a. The influence of the exhaust system unsteady gas flow and insulation on the performance of a multi-cylinder turbocharged diesel engine. Heat Recovery Systems and CHP 15:51-72.
33. Rakopoulos CD, Hountalas DT, Taklis GN, Tzanos EI. 1995b. Analysis of combustion and pollutants formation in a direct injection diesel engine using a multi-zone model. Energy Research 19:63-88.
34. Rakopoulos CD, Hountalas DT, Mavropoulos GC, Giakoumis EG. 1997. An integrated transient analysis simulation model applied in thermal loading calculations of an air-cooled diesel engine under variable speed and load conditions. Transactions of the SAE, Journal of Engines 106:923-939.
35. Rakopoulos CD, Mavropoulos GC, Hountalas DT. 1998. Modeling the structural thermal response of an air-cooled diesel engine under transient operation including a detailed thermodynamic description of boundary conditions. Paper 981024, Society of Automotive Engineers (American).
36. Seale WJ, Taylor DHC. 1970-71. Spatial variation of heat transfer to pistons and liners of some medium speed diesel engines. Proceedings of the Institution of Mechanical Engineers 185:203-218.
37. Sitkei G. 1974. Heat Transfer and Thermal Loading in Internal Combustion Engines. Akademiai Kiado: Budapest, Hungary.
38. Tillock BR, Martin JK. 1996. Measurement and modeling of thermal flows in an air-cooled engine. Transactions of the SAE, Journal of Engines 105:1781-1789.
39. Welty JR. 1974. Engineering Heat Transfer. Wiley: New York, USA.
40. Whitehouse ND, 1970-71. Heat transfer in a quiescent chamber diesel engine. Proceedings of the Institution of Mechanical Engineers 185:963-975.
41. Whitehouse ND, Way RGB. 1969-70. Rate of heat release in diesel engines and its correlation with fuel injection data. Proceedings of the Institution of Mechanical Engineers 184:17-29.
42. Woschni G, Spindler W. 1988. Heat transfer with insulated combustion chamber walls and its influence on the performance of diesel engines. Transactions of the ASME, Journal of Engineering for Gas Turbines and Power 110:482-488.
43. Zhaoda Y, Zheng F, Xiaoli Y, Zhixing Y, Hongouan S. 1988. Calculation and prediction of thermal loading of the air-cooled diesel engine. Paper 881254, Society of Automotive Engineers (American).