An integrated transient analysis simulation model applied in thermal loading calculations of an air-cooled diesel engine under variable speed and load conditions

SAE Technical Papers

Volumn , Issue , 1997, Pages

  Rakopoulos, C D ^a   Hountalas, D T ^a   Mavropoulos, G C ^a   Giakoumis, E G ^a  

^a NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

[No Author keywords available]

Indexed keywords

ANALOG TO DIGITAL CONVERSION; COOLING SYSTEMS; CYLINDER HEADS; DIESEL ENGINES; DIRECT INJECTION; FINITE ELEMENT METHOD; HEAT FLUX; THERMAL LOAD;

ANALOG TO DIGITAL CONVERTERS; DIESEL ENGINE PERFORMANCE; SINGLE-CYLINDER DIESEL ENGINE; TEMPERATURE EXCURSIONS; THERMAL BOUNDARY CONDITIONS; THREE DIMENSIONAL FINITE ELEMENT ANALYSIS; TRANSIENT CONDITIONS; TRANSIENT MECHANICAL;

TRANSIENT ANALYSIS;

EID: 85072452376     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/970634     Document Type: Conference Paper

References (49)

1. Winterbone, D.E., Benson, R.S., Mortimer, A.G., Kenyon, P., and Stotter, A., 'Transient Response of Turbocharged Diesel Engines: Pt. 1-A Comparison of Two Methods of Improving Response, Pt. 2 -Application to a Heavy Duty Truck: A Study of the Dynamic Performance of the Engine' SAE paper No 770122, 1977.
2. Watson, N., and Marzouk, M., 'A Non-Linear Digital Simulation of Turbocharged Diesel Engines under Transient Conditions' SAE paper No 770123, 1977.
3. Watson, N., 'Transient Performance Simulation and Analysis of Turbocharged Diesel Engines' SAE paper No 810338, 1981.
4. Winterbone, D.E., and Tennant, D.W.H., 'The Variation of Friction and Combustion Rates During Diesel Engine Transients' SAE paper No 810339, 1981.
5. Gardner, T.P., and Henein, N.A., 'Diesel Starting: A Mathematical Model' SAE paper No 880426, 1988.
6. Bazari, Z., 'Diesel Exhaust Emissions Prediction under Transient Operating Conditions' SAE paper No 940666, 1994.
7. Rakopoulos, C.D., Giakoumis, E.G., and Hountalas, D.T., 'A Simulation Analysis of the Effect of Governor Technical Characteristics and Type on the Transient Performance of a Naturally Aspirated IDI Diesel Engine' accepted for presentation at the 1997 SAE International Congress and Exposition, Detroit MI, Feb. 24-27, 1997.
8. Keribar, R., and Morel, T., 'Thermal Shock Calculations in I.C. Engines' SAE paper No 870162, 1987.
9. Alkidas, A.C., and Myers, J.P., 'Transient Heat Flux Measurements in the Combustion Chamber of a Spark Ignited Engine' Trans. ASME, J. of Heat Transfer, 104, 62-67, 1982.
10. Assanis, D.N., and Badillo, E., 'Transient Heat Conduction in Low-Heat-Rejection Engine Combustion Chambers' SAE paper No 870156, 1987.
11. Assanis, D.N., and Badillo, E., 'Transient Analysis of Piston-Liner Heat Transfer in Low-Heat-Rejection Diesel Engines' SAE paper No 880189, 1988.
12. Rakopoulos, C.D., and Mavropoulos, G.C., 'Study of the Steady and Transient Temperature Field and Heat Flow in the Combustion Chamber Components of a Medium Speed Diesel Engine using Finite Element Analyses' Energy Res., 20, 437-464, 1996.
13. Zhaoda, Y., Zheng, F., Xiaoli, Y., Zhixing, Y., and Hongouan, S., 'Calculation and Prediction of Thermal Loading of the Air-Cooled Diesel Engine' SAE paper No 881254, 1988.
14. Kouremenos, D. A., Rakopoulos, C.D., Mavropoulos, G.C., and Hountalas, D.T., 'Modelling the Transient Temperature Field in the Combustion Chamber Surfaces of Internal Combustion Engines using Finite Element Analysis' 10th IASTED MIC Intern. Conf., Innsbruck, Austria, Proc. ACTA PRESS, Anaheim CA, pp. 485-462, 1991.
15. Morel, T., and Keribar, R., 'A Model for Predicting Spatially and Time-resolved Convective Heat Transfer in Bowl-in-Piston Combustion Chambers' SAE paper No 850204, 1985.
16. Morel, T., and Keribar, R., 'Heat Radiation in DI Diesel Engines' SAE paper NO 860445, 1986.
17. Morel, T., Keribar, R., and Blumberg, P.N., 'Cyclical Thermal Phenomena in Engine Combustion Chamber Surfaces' SAE paper No 850360, 1985.
18. Jennings, M.J., and Morel, T., 'Modeling of Turbulent Heat Transfer with Application to I.C. Engines' SAE paper No 872104, 1987.
19. Jennings, M., and Morel, T., 'A Computational Study of Wall Temperature Effects on Engine Heat Transfer' SAE paper No 910459, 1991.
20. Lowe, A., and Morel, T., 'A New Generation of Tools for Accurate Thermo-Mechanical Finite Element Analyses of Engine Components' SAE paper No 920681, 1992.
21. Borman, G., and Nishiwaki, K., 'Internal Combustion Engine Heat Transfer' Progress in Energy and Comb. Sci., 13, 1-46, 1987.
22. LeFebvre, T., Myers, P.S., and Uyehara, O.A., 'Experimental Instantaneous Heat Fluxes in a Diesel Engine and their Correlation' SAE paper No 690464, 1969.
23. Mure, C., and Rhee, K.T., 'Instantaneous Heat Transfer over the Piston of a Motored Direct Injection Type Diesel Engine' SAE paper No 890469, 1989.
24. Boulouchos, K., Eberle, M., Ineichen, B., and Klukowski, C., 'New Insights into the Mechanisms of In Cylinder Heat Transfer in Diesel Engines' SAE paper No 890573, 1989.
25. Kamel, M., and Watson, N., 'Heat Transfer in the Indirect Injection Diesel Engine' SAE paper No 790826, 1979.
26. Whitehouse, N.D., 'Heat Transfer in a Quiescent Chamber Diesel Engine' Proc. Inst. Mech. Engrs, 185, 963-975, 1970-71.
27. Kouremenos, D. A., Rakopoulos, C. D., and Hountalas, D. T., 'Thermodynamic Analysis of Indirect Injection Diesel Engines by Two-Zone Modelling of Combustion' Trans. ASME, J. Engng for Gas Turbines and Power, 112, 138-149, 1990.
28. Kouremenos, D.A, Rakopoulos, C.D., Hountalas, D.T., and Kotsiopoulos, P.N., 'A Simulation Technique for the Fuel Injection System of Diesel Engines' ASME-WA meeting, Atlanta GA, Proc. AES, Vol. 24, pp. 91-102, 1991.
29. Kouremenos, D.A., Rakopoulos, C.D., and Hountalas, D.T., 'Thermodynamic Analysis of a Divided Combustion Chamber Diesel Engine' VDI Forschung Ing-Wesens, 54, 73-81, 1988.
30. Rakopoulos, C.D., 'Ambient Temperature and Humidity Effects on the Performance and Nitric Oxide Emission of Spark Ignition Engined Vehicles in Athens /Greece' Solar and Wind Technol., 5, 315-320, 1988.
31. Rakopoulos, C.D., 'Influence of Ambient Temperature and Humidity on the Performance and Emissions of Nitric Oxide and Smoke for High Speed Diesel Engines in the Athens/Greece Region' Energy Convers. Mgmt, 33, 447-458, 1991.
32. Krieger, R.B., and Borman, G.L., 'The Computation of Apparent Heat Release for Internal Combustion Engines' ASME paper No 66 WA/DGP-4, 1966.
33. Ferguson, C.R., Internal Combustion Engines, John Wiley and Sons, New York, 1986.
34. Heywood, J.B., Internal Combustion Engine Fundamentals, McGraw-Hill, New York, 1988.
35. Rakopoulos, C.D., and Giakoumis, E.G., ' Development of Cumulative and Availability Rate Balances in a Multi-Cylinder Turbocharged IDI Diesel Engine ' Energy Convers. Mgmt, 1996 (In press).
36. Benson, R.S., and Whitehouse, N.D., Internal Combustion Engine, Pergamon, Oxford, 1979.
37. Whitehouse, N.D., and Way, R.G.B., 'Rate of Heat Release in Diesel Engines and its Correlation with Fuel Injection Data' Proc. Inst. Mech. Engrs, 184 (Part 3J), 17-27, 1969-70.
38. Annand, W.J.D., 'Heat Transfer in the Cylinders of Reciprocating Internal Combustion Engines' Proc. Inst. Mech. Engrs, 177, 973-990, 1963.
39. Millington, B.W., and Hartles, E.R., 'Frictional Losses in Diesel Engines' SAE paper No 680590, 1968.
40. Taylor, C.F., The Internal Combustion Engine in Theory and Practice, Vol. 2, MIT Press, 1985.
41. Krutov, V.I., Automatic Control of Internal Combustion Engines, MIR Publishers, Moscow, 1987.
42. Welbourne, D.B., Roberts. D.K., and Fuller, R.A., 'Governing of Compression Ignition Oil Engines' Proc. Inst. Mech. Engrs, 173, 575-591, 1959.
43. Fenner, R.T., Finite Element Methods for Engineers, MacMillan, London, 1975.
44. Zienkiewicz, O.C., The Finite Element Method in Engineering Science, McGraw-Hill, London, 1971.
45. Seale, W.J., and Taylor, D.H.C., 'Spatial Variation of Heat Transfer to Pistons and Liners of Some Medium Speed Diesel Engines' Proc. Inst. Mech. Engrs, 185, 203-218, 1970-71.
46. Sitkei, G., Heat Transfer and Thermal Loading in Internal Combustion Engines, Akademiai Kiado, Budapest, 1974.
47. Furuhama, S., and Suzuki, H., 'Temperature Distribution of Piston Rings and Piston in High Speed Diesel Engine' Bulletin JSME, 22, 1788-1795, 1979.
48. French, C.C.J., 'Piston Cooling' SAE paper No 720024, 1972.
49. Kern, D.Q., and Kraus, A.D., Extended Surface Heat Transfer, McGraw-Hill, New York, 1972.