Modeling the structural thermal response of an air-cooled diesel engine under transient operation including a detailed thermodynamic description of boundary conditions

SAE Technical Papers

Volumn , Issue , 1998, Pages

  Rakopoulos, C D ^a   Mavropoulos, G C ^a   Hountalas, D T ^a  

^a NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

[No Author keywords available]

Indexed keywords

ANALOG TO DIGITAL CONVERSION; BOUNDARY CONDITIONS; COMBUSTION CHAMBERS; COOLING SYSTEMS; DIRECT INJECTION; ENGINE CYLINDERS; FINITE ELEMENT METHOD; HEAT FLUX; HEAT TRANSFER; TEMPERATURE;

ANALOG TO DIGITAL CONVERTERS; ENGINE OPERATING CONDITIONS; INDIVIDUAL CHARACTERISTICS; SPECIFIC FUEL CONSUMPTION; THERMODYNAMIC DESCRIPTION; THERMODYNAMIC PARAMETER; THERMODYNAMIC SIMULATIONS; THREE DIMENSIONAL FINITE ELEMENT ANALYSIS;

DIESEL ENGINES;

EID: 85072473121     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/981024     Document Type: Conference Paper

References (44)

1. Gardner, T.P., and Henein, N.A., 'Diesel Starting: A Mathematical Model' SAE paper No 880426, 1988.
2. Bazari, Z., 'Diesel Exhaust Emissions Prediction under Transient Operating Conditions' SAE paper No 940666, 1994.
3. Rakopoulos, C.D., Giakoumis, E.G., and Hountalas, D.T., 'A Simulation Analysis of the Effect of Governor Technical Characteristics and Type on the Transient Performance of a Naturally Aspirated IDI Diesel Engine' SAE paper No 970633, 1997.
4. Keribar, R., and Morel, T., 'Thermal Shock Calculations in I.C. Engines' SAE paper No 870162, 1987.
5. Alkidas, A.C., and Myers, J.P., 'Transient Heat Flux Measurements- in the Combustion Chamber of a Spark Ignited Engine' Trans. ASME, J. of Heat Transfer, 104, 62-67, 1982.
6. Assanis, D.N., and Badillo, E., 'Transient Heat Conduction in Low-Heat-Rejection Engine Combustion Chambers' SAE paper No 870156, 1987.
7. Assanis, D.N., and Badillo, E., 'Transient Analysis of Piston-Liner Heat Transfer in Low-Heat-Rejection Diesel Engines' SAE paper No 880189, 1988.
8. Rakopoulos, C.D., and Mavropoulos, G.C., 'Study of the Steady and Transient Temperature Field and Heat Flow in the Combustion Chamber Components of a Medium Speed Diesel Engine Using Finite Element Analyses' Energy Res., 20, 437-464, 1996.
9. Zhaoda, Y., Zheng, F., Xiaoli, Y., Zhixing, Y., and Hongouan, S., 'Calculation and Prediction of Thermal Loading of the Air-Cooled Diesel Engine' SAE paper No 881254, 1988.
10. Kouremenos, D.A., Rakopoulos, C.D., Mavropoulos, G.C., and Hountalas, D.T., 'Modelling the Transient Temperature Field in the Combustion Chamber Surfaces of Internal Combustion Engines Using Finite Element Analysis' 10th IASTED MIC Intern. Conf., Innsbruck, Austria, Proc. ACTA PRESS, Anaheim CA, pp. 485-462, 1991.
11. Morel, T., and Keribar, R., 'A Model for Predicting Spatially and Time-Resolved Convective Heat Transfer in Bowl-in-Piston Combustion Chambers' SAE paper No 850204, 1985.
12. Morel, T., and Keribar, R., 'Heat Radiation in DI Diesel Engines' SAE paper No 860445, 1986.
13. Morel, T., Keribar, R., and Blumberg, P.N., 'Cyclical Thermal Phenomena in Engine Combustion Chamber Surfaces' SAE paper No 850360, 1985.
14. Jennings, M.J., and Morel, T., 'Modeling of Turbulent Heat Transfer with Application to I.C. Engines' SAE paper No 872104, 1987.
15. Jennings, M., and Morel, T., 'A Computational Study of Wall Temperature Effects on Engine Heat Transfer' SAE paper No 910459, 1991.
16. Lowe, A., and Morel, T., 'A New Generation of Tools for Accurate Thermo-Mechanical Finite Element Analyses of Engine Components' SAE paper No 920681, 1992.
17. LeFebvre, T., Myers, P.S., and Uyehara, O.A., 'Experimental Instantaneous Heat Fluxes in a Diesel Engine and their Correlation' SAE paper No 690464, 1969.
18. Whitehouse, N.D., 'Heat Transfer in a Quiescent Chamber Diesel Engine' Proc. Inst. Mech. Engrs, 185, 963-975, 1970-71.
19. Borman, G., and Nishiwaki, K., 'Internal Combustion Engine Heat Transfer' Progress in Energy and Comb. Sci., 13, 1-46, 1987.
20. Mure, C., and Rhee, K.T., 'Instantaneous Heat Transfer over the Piston of a Motored Direct Injection-Type Diesel Engine' SAE paper No 890469, 1989.
21. Boulouchos, K., Eberle, M., Ineichen, B., and Klukowski, C., 'New Insights into the Mechanisms of In-Cylinder Heat Transfer in Diesel Engines' SAE paper No 890573, 1989.
22. Kamel, M., and Watson, N., 'Heat Transfer in the Indirect Injection Diesel Engine' SAE paper No 790826, 1979.
23. Rakopoulos, C.D., Hountalas, D.T., Mavropoulos, G.C., and Giakoumis, E.G., 'An Integrated Transient Analysis Simulation Model Applied in Thermal Loading Calculations of an Air-Cooled Diesel Engine under Variable Speed and Load Conditions' SAE paper No 970634, 1997.
24. Kouremenos, D. A., Rakopoulos, C. D., and Hountalas, D. T., 'Thermodynamic Analysis of Indirect Injection Diesel Engines by Two-Zone Modelling of Combustion' Trans. ASME, J. Engng for Gas Turbines and Power, 112, 138-149, 1990.
25. Kouremenos, D.A., Rakopoulos, C.D., Hountalas, D.T., and Kotsiopoulos, P.N., 'A Simulation Technique for the Fuel Injection System of Diesel Engines' ASME-WA meeting, Atlanta GA, Proc. AES, Vol. 24, pp. 91-102, 1991.
26. Kouremenos, D.A., Rakopoulos, C.D., and Hountalas, D.T., 'Thermodynamic Analysis of a Divided Combustion Chamber Diesel Engine' VDI Forschung Ing-Wesens, 54, 73-81, 1988.
27. Rakopoulos, C.D., 'Ambient Temperature and Humidity Effects on the Performance and Nitric Oxide Emission of Spark Ignition Engined Vehicles in Athens /Greece' Solar and Wind Technol., 5, 315-320, 1988.
28. Rakopoulos, C.D., 'Influence of Ambient Temperature and Humidity on the Performance and Emissions of Nitric Oxide and Smoke for High Speed Diesel Engines in the Athens/ Greece Region' Energy Convers. Mgmt, 33, 447-458, 1991.
29. Krieger, R.B., and Borman, G.L., 'The Computation of Apparent Heat Release for Internal Combustion Engines' ASME paper No 66 WA/DGP-4, 1966.
30. Ferguson, C.R., Internal Combustion Engines, John Wiley and Sons, New York, 1986.
31. Heywood, J.B., Internal Combustion Engine Fundamentals, McGraw-Hill, New York, 1988.
32. Rakopoulos, C.D., and Giakoumis, E.G., 'Development of Cumulative and Availability Rate Balances in a Multi-Cylinder Turbocharged IDI Diesel Engine' Energy Convers. Mgmt, 38, 347-369, 1997.
33. Benson, R.S., and Whitehouse, N.D., Internal Combustion Engines, Pergamon, Oxford, 1979.
34. Whitehouse, N.D., and Way, R.G.B., 'Rate of Heat Release in Diesel Engines and its Correlation with Fuel Injection Data' Proc. Inst. Mech. Engrs, 184 (Part 3J), 17-27, 1969-70.
35. Rakopoulos, C.D., and Hountalas, D.T., 'Net and Gross Heat Release Rate Calculations in a DI Diesel Engine Using Various Heat Transfer Models' ASME-WA meeting, Chicago IL, Proc. AES, Vol. 33, pp. 251-262, 1994.
36. Annand, W.J.D., 'Heat Transfer in the Cylinders of Reciprocating Internal Combustion Engines' Proc. Inst. Mech. Engrs, 177, 973-990, 1963.
37. Rakopoulos, C.D., and Mavropoulos, G.C., 'Components Heat Transfer Studies in a Low Heat Rejection DI Diesel Engine Using a Hybrid Thermostructural Finite Element Model' Applied Thermal Engng, 1997 (In press).
38. Fenner, R.T., Finite Element Methods for Engineers, MacMillan, London, 1975.
39. Zienkiewicz, O.C., The Finite Element Method in Engineering Science, McGraw-Hill, London, 1971.
40. Seale, W.J., and Taylor, D.H.C., 'Spatial Variation of Heat Transfer to Pistons and Liners of Some Medium Speed Diesel Engines' Proc. Inst. Mech. Engrs, 185, 203-218, 1970-71.
41. Sitkei, G., Heat Transfer and Thermal Loading in Internal Combustion Engines, Akademiai Kiado, Budapest, 1974.
42. Furuhama, S., and Suzuki, H., 'Temperature Distribution of Piston Rings and Piston in High Speed Diesel Engine' Bulletin JSME, 22, 1788-1795, 1979.
43. French, C.C.J., 'Piston Cooling' SAE paper No 720024, 1972.
44. Kern, D.Q., and Kraus, A.D., Extended Surface Heat Transfer, McGraw-Hill, New York, 1972.