Recent thermohydrodynamic analyses and designs of thick-film bearings

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 214, Issue 1, 2000, Pages 107-122

  Tanaka, M ^a  

^a UNIVERSITY OF TOKYO   (Japan)

Author keywords

Design; Hydrodynamic oil film bearing; Journal bearings; Thermohydrodynamic lubrication; Thrust bearing

Indexed keywords

DESIGN; JOURNAL BEARING; OIL FILM BEARING; THERMOHYDRODYNAMIC LUBRICATION; THRUST BEARING;

EID: 0034114298     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/1350650001543034     Document Type: Article

References (57)

1. Dowson, D. A generalised Reynolds equation for fluid film lubrication. Int. Mech. Sei., 1962, 4, 159-170.
2. Taniguchi, S., Makino, T., Takcshita, K. and Ichimura, T. A thermohydrodynamic analysis of large tilting-pad journal bearing in laminar and turbulent flow regimes with mixing. Trans. ASME, J. Tribology, 1990, 112, 542-550.
3. Ng, C. W. and Pan, C. H. T. A linearised turbulent lubrication theory. Trans. ASME, J. Basic Engng, 1965, 87, 675-688.
4. Taniguchi, S., Makino, T., Ozawa, Y. and Ichimura, T. A thermohydrodynamic lubrication analysis to design large two-pad journal bearing with cooling ditches. Trans. ASME, J. Tribology, 1998, 120, 214-220.
5. Bouard, L., Fillon, M. and Frêne, J. Thermohydrodynamic analysis of tilting-pad journal bearings operating in turbulent flow regime. Trans. ASME, J. Tribology, 1996, 118, 225-231.
6. Bouard, L., Fillon, M. and Frêne, J. Comparison between three turbulent models-application to thermohydrodynamic performances of tilting pad journal bearings. Tribology Int., 1996, 29, 11-18.
7. El-Deihi, M. K. I. and Gethin, D. T. A thermohydrodynamic analysis of a twin axial groove bearing under différent loading directions and comparison with experiment. Trans. ASME, J. Tribolo<, 1992, 114, 304-310.
8. Fillon, M., Bligoud, J. C. and Frêne, J. Experimental study of tilting-pad journal bearings-comparison with theoretical thermoelastohydrodynamic results. Trans. ASME, J. Tribology, 1992, 114, 579-588.
9. Basri, S. B. and Gethin, D. T. An experimental investigation into the thermal behaviour of a three-lobe profile bore bearing. Trans. ASME, J. Tribology, 1993, 115, 152-159.
10. Simmons, J. and Dixon, S. Effect of load direction, preload, clearance ratio and oil flow on the performance of a 200 mm journal pad bearing. Tribology Trans., 1994, 37, 227-236.
11. Simmons, J. E. L. and Lawrence, C. D. Performance experiments with a 200 mm, offset pivot journal pad bearing. Tribology Trans., 1996, 39, 969-973.
12. Bouchoule, C., Fillon, M., Nicolas, D. and Barret, F. Experimental study of thermal effects in tilting-pad journal bearings at high operating speeds. Trans. ASME, J. Tribology, 1996, 118, 532-537.
13. Makino, T., Morohoshi, S. and Taniguchi, S. Thermo-hydrodynamic performance of high-speed journal bearings. Proc. Instn Afech. Engrs, Part J, Journal of Engineering Tribology, 1996, 210(J3), 179-187.
14. Ma, iM.-T. and Taylor, C. M. A comparative thermal analysis of the static performance of different fixed profile bore plain bearings. Proc. Instn Mech. Engrs, Part J, Journal of Engineering Tribology, 1999, 213(J1), 13-30.
15. San Andres, L. and Jackson, M. C. Measurements of the static load (on pad) performance and pad temperature in a flexure-pivot tilting-pad bearing. Tribology Trans., 1998, 41, 225-232.
16. Vijayaraghavan, D. and Brewe, D. E. Effect of rate of viscosity variation on the performance of journal bearings. Trans. ASME, J. Tribology, 1998, 120, 1-7.
17. Kim, K. W. and Rodkievvicz, C. M. On the thermal effects in the design of tilting-pad bearings subjected to inlet pressure build-up. Trans. ASME, J. Tribology, 1991, 113, 526-532.
18. Ha, H. C., Kim, H. J. and Kim, K. W. Inlet pressure effects on the thermohydrodynamic performance of a large tilting pad journal bearing. Trans. ASME, J. Tribology, 1995, 117, 160165.
19. Tanaka, M. Thermohydrodynamic performance of a tilting pad journal bearing with spot lubrication. Trans. ASME, J. Tribology, 1991, 113, 615-619.
20. Dmochowski, W., Brockwell, K., DeCamillo, S. and Mikula, A. A study of the thermal characteristics of the leading edge groove and conventional tilting pad journal bearings. Trans. ASME, J. Tribology, 1993, 115, 219-226.
21. Harangozo, A., Stolarski, T. and Godzawa, R. The effect of different lubrication methods on the performance of a tiltingpad journal bearing. Tribology Trans., 1991, 34, 529-537.
22. Gomiciaga, R. and Keough, P. S. Orbit induced journal temperature variation in hydrodynamic bearings. Trans. ASME, J. Tribology, 1999, 121, 77-84.
23. Khonsari, M. M. and Wang, S. H. On the maximum temperature in double-layered journal bearings. Trans. ASME, J. Tribology, 1991, 113, 464-469.
24. Knight, J. and Ghadimi, P. Effects of modified effective length models of the rupture zone on the analysis of a fluid journal bearing. Tribology Trans., 1992, 35, 29-38.
25. Ma, M. T. and Taylor, C. Prediction of temperature fade in the cavitation region of two-lobe journal bearings. Proc. Instn Mech. Engrs, Part J, Journal of Engineering Tribology, 1994, 208(J2), 133-139.
26. Khonsari, M. M. and Wang, S. H. On the fluid-solid interaction in reference to thermoelastohydrodynamic analysis of journal bearings. Trans. ASME, J. Tribology, 1991, 113, 398-404.
27. Tanaka, M. and Hatakenaka, K. Thermohydrodynamic analysis of journal bearings with partial reverse flow in the film. In Proceedings of the JAST Tribology Conference, Kanazawa, Japan, 1994, pp. 82-84.
28. Vijayaraghavan, D. An efficient numerical procedure for thermohydrodynamic analysis of cavitating bearings. Trans., ASME, J. Tribology, 1996, 118, 555-563.
29. Elrod, II. G. Efficient numerical method for computation of the thermohydrodynamics of laminar lubricating films. Trans. ASME, J. Tribology, 1991, 113, 506-511.
30. Kim, J., Palazzolo, A. and Gandagi, R. TEHD analysis for tilting-pad journal bearings using upwind finite element method. Tribology Trans., 1994, 37, 771-783.
31. Tucker, P. G. and Keough, P. S. A generalized computational fluid dynamics approach for journal bearing performance prediction. Pmc. Instn Mech. Engrs, Part J, Journal of Engineering Tribology, 1995, 209(J2), 99-108.
32. Branagan, L. A. and Barrett, L. E. Influence of cross-film viscosity variation on conduction effects in journal bearings. Tribology Trans., 1998, 41, 513-518.
33. Khonsari, M. M., Jang, J. Y. and Fillon, M. On the generalization of thermohydrodynamic analysis for journal bearings. Trans. ASME, J. Tribology, 1996, 118, 571-589.
34. Pliakas, P. and Parkins, D. W. Single-axial groove journal bearings: static characteristics and a temperature prediction technique. Pmc. Instn Mech. Engrs, Part J, Journal of Engineering Tribology, 1996, 210(J1), 45-54.
35. Fillon, M. and Khonsari, M. Thermohydrodynamic design charts for tilting-pad journal bearings. Trans. ASME, J. Tribology, 1996, 118, 232-238.
36. Tanaka, M. Discussion on reference [35]. Trans. ASME, J. Tribology, 1996, 118, 702-703.
37. Keough, P. S., Gomiciaga, R. and Khonsari, M. M. CFD based design techniques for thermal prediction in a generic two-axial groove hydrodynamic journal bearing. Trans. ASME, J. Tribology, 1997, 119, 428-436.
38. Wilson, W. R. D. A framework for thermohydrodynamic lubrication analysis. Trans. ASME, J. Tribology, 1998, 120, 399-405.
39. Monmousseau, P., Fillon, M. and Frêne, J. Transient thermoelastohydrodynamic study of tilting-pad journal bearings-comparison between experimental data and theoretical results. Trans. ASME, J. Tribology, 1997, 119, 401-407.
40. Monmousseau, P., Fillon, M. and Frêne, J. Transient thermoelastohydrodynamic study of tilting-pad journal bearings-application to bearing size. Trans. ASME, J. Tribology, 1998, 120, 319-324.
41. Yang, J. Y., Khonsari, M. M. and Pascovici, M. D. Thermohydrodynamic seizure: experimental and theoretical analysis. Trans. ASME, J. Tribology, 1998, 120, 8-15.
42. Paranjpc, R. S. and Han, T. A transient thermohydrodynamic analysis including mass conserving cavitation for dynamically loaded journal bearing. Trans. ASME, J. Tribology, 1995, 117, 369-378.
43. Paranjpe, R. S. A study of dynamically loaded engine bearings using a transient thermohydrodynamic analysis. Tribology Trans., 1996, 39, 636-644.
44. Suzuki, S., Ozasa, T., Yamamoto, M., Nozawa, Y., Noda, T. and Ohori, M. Temperature distribution and lubrication characteristics of connecting rod big end bearings. SÄE Trans., 1995, 952550, 2025-2034.
45. Suzuki, S., Ozasa, T., Noda, T. and Konomi, T. Effect of oil supply rate on temperature and contact of a con-rod big end bearing. Proc. J. SAE, 1996, 9638789, 133-136.
46. Ettles, C. M. and Anderson, II. G. Three-dimensional thermoelastic solutions of thrust bearings using Code Marmacl. Trans. ASME, J. Tribology, 1991, 113, 405-412.
47. Ettles, C. M. Some factors affecting the design of spring supported thrust bearings in hydroelectric generator. Trans. ASME, J. Tribology, 1991, 113, 626-632.
48. Brockett, T. S., Barrett, L. and Allaire, P. E. Thermo-elastohydrodynamic analysis of fixed geometry thrust bearings including runner deformation. Tribology Trans., 1996, 39, 555-562.
49. Tanaka, M., Hori, Y. and Ebinuma, R. Measurement of the film thickness and temperature profiles in a tilting pad thrust bearing. In Proceedings of the International Tribology Conference, Tokyo, Japan, 1985, 553-558.
50. Kim, K. W., Tanaka, M. and Hori, Y. An experimental study on the thermohydrodynamic lubrication of tilting-pad thrust bearings. J. JAST, 1995, 40, 70-77.
51. Kim, K. W., Tanaka, M. and Hori, Y. A three-dimensional thermohydrodynamic performance of sector-shaped, tiltingpad thrust bearings. Trans. ASME, J. Lubric. Technol, 1983, 105, 406-413.
52. Uno, S., Andoh, M., Naniba, S. and Alukai, K. Overview of recent tendencies in thrust bearings for hydrogenerators. J. JAST, 1997, 42, 129-135.
53. Bassani, R., Chilli, E. and Forte, P. An investigation on thrust bearing tilting pads. Proc. Instn Mech. Engrs, Part J, Journal of Engineering Tribology, 1998, 212(J4), 271-277.
54. Jang, J. Y. and Khonsari, IM. IST. Thermohydrodynamic design charts for slider bearings. Trans. ASME, J. Tribology, 1997, 119, 733-740.
55. Zhang, J. X. and Rodkiewicz, C. M. On the design of thrust bearings using a CFD technique. Tribology Trans., 1997, 40, 403-412.
56. Tor, S. and Tanaka, M. Experimental investigation of the effect of shaft heating and cooling on single bore journal bearing. In Proceedings of the Nordtrib, 1996, Vol. II.
57. Tor, S. and Tanaka, M. Thermohydrodynamic performance of journal bearings with external heat source being considered (2nd report). In Proceedings of JAST Tribology Conference, Kita-Kyushu, Japan, 1996, pp. 81-83.