Thermal stresses in functionally graded materials

Journal of Thermal Stresses

Volumn 22, Issue 4-5, 1999, Pages 477-512

  Noda, Naotake ^a  

^a SHIZUOKA UNIVERSITY   (Japan)

Author keywords

Fracture Mechanics; Functionally Graded Materials; Thermal Stresses

Indexed keywords

CRACK INITIATION; CRACK PROPAGATION; FRACTURE MECHANICS; HIGH TEMPERATURE PROPERTIES; STRESS INTENSITY FACTORS;

FUNCTIONALLY GRADED MATERIALS (FGM); THERMAL SHOCK;

THERMAL STRESS;

EID: 0032631352     PISSN: 01495739     EISSN: 1521074X     Source Type: Journal    
DOI: 10.1080/014957399280841     Document Type: Article

References (154)

1. M. A. Steinberg, Materials for Aerospace, Sci. America, vol. 255, no. 4, pp. 59-64, 1986.
2. M. Yamanouchi et al., Proc. First Int. Sympos. on Functionally Gradient Materials, Sendai, 1990.
3. M. Koizumi, The Concept of FGM, J. B. Holt et al. (eds.), Functionally Gradient Materials, Ceramic Trans., vol. 34, pp. 3-9, The American Ceramic Society, 1993.
4. Y. Tanigawa, Some Basic Thermoelastic Problems for Nonhomogeneous Structural Materials, Appl. Mech. Rev., vol. 48, no. 6, pp. 287-300, 1995.
5. N. Noda, Thermal Stresses in Materials with Temperature-Dependent Properties, in R. B. Hetnarski (ed.), Thermal Stresses I, chap. 6, pp. 391-438, Elsevier Science, North-Holland, 1986.
6. R. Kawamura and Y. Tanigawa, Multipurpose Optimization Problem of Material Composition Taking into Account Thermal Stress Relaxation and Improvement of Heat Resistance for a Nonhomogeneous Circular Plate due to Uniform Heat Supply from Its Surfaces, JSME Int. J., Ser. A, vol. 41, no. 3, pp. 318-325, 1998.
7. Y. Tanigawa, Y. Ootao, R. Kawamura, and R. Imamura, Optimization Problem of Material Composition of Functionally Graded Materials for Thermal Stress Relaxation by Making Use of Neural Network, Proc. Thermal Stresses’97, pp. 727-730, Rochester, 1997.
8. Y. Tanigawa, M. Matsumoto, and T. Akai, Optimization of Material Composition to Minimize Thermal Stresses in Nonhomogeneous Plate Subjected to Unsteady Heat Supply, JSME Int. J., Ser. A, vol. 40, no. 1, pp. 84-93, 1997.
9. Y. Yanigawa, N. Oka, R. Kawamura, and T. Akai, One-Dimensional Transient Thermal Stress Problem for Nonhomogeneous Hollow Circular Cylinder and Its Optimization of Material Composition for Thermal Stress Relaxation, JSME Int. J., Ser. A, vol. 40, no. 2, pp. 117-127, 1997.
10. R. Kawamura and Y. Tanigawa, Axisymmetric Thermal Bending Problem of Nonhomogeneous Circular Plate — Inverse Analysis of Material Composition and Coefficients of Heat Transfer in Order to Prescribe the Out-of-Plane Deformation, Proc. Thermal Stresses’95, pp. 267-270 Hamamatsu, 1995.
11. Y. Tanigawa, R. Kawamura, T. Akai, and N. Oka, Transient Thermal Stress Analysis of a Nonhomogeneous Plate Taking into Account the Relative Heat Transfer at Boundary Surfaces, Japan Soc. Mech. Eng., Ser. A, vol. 62, no. 593, pp. 131-137, 1996.
12. Y. Tanigawa, R. Kawamura, N. Oka, and T. Akai, Transient Heat Conduction and Thermal Stress Problems of a Nonhomogeneous Plate with Temperature-Dependent Material Properties, J. Thermal Stresses, vol. 19, no. 1, pp. 77-102, 1996.
13. Y. Tanigawa, T. Akai, and T. Kasai, One-Dimensional Transient Heat Conduction and Associated Thermal Stress Problems of a Plate with Nonhomogeneous Material Properties, Japan Soc. Mech. Eng., Ser. A, vol. 61, no. 583, pp. 607-613, 1995.
14. Y. Ootao and Y. Tanigawa, Three-Dimensional Transient Thermal Stress Analysis of a Nonhomo-geneous Hollow Sphere due to Rotating Heat Source, Proc. Thermal Stresses’95, pp. 339-342, Hamamatsu, 1995.
15. Y. Ootao, T. Akai, and Y. Tanigawa, Three-Dimensional Transient Thermal Stress Analysis of a Nonhomogeneous Hollow Circular Cylinder due to a Moving Heat Source in Axial Direction, J. Thermal Stresses, vol. 18, no. 5, pp. 497-512, 1995.
16. Y. Sugano, N. Kimura, K Sato, and N. Sumi, Three-Dimensional Analysis of Transient Thermal Stresses in a Nonhomogeneous Plate, Japan Soc. Mech. Eng., Ser. A, vol. 62, no. 595, pp. 728-736, 1996.
17. Y. Sugano, K Sato, and N. Sumi, An Analytical Solution to Transient Temperature Field in a Functionally Graded Material Plate by Piecewise-Linear Nonhomogeneity Approximation Method, Japan Soc. Mech. Eng., Ser. A, vol. 63, no. 606, pp. 378-384, 1997.
18. Y. Obata and N. Noda, Optimum Material Design for Functionally Gradient Material Plate, Arch. Appl. Mech., vol. 66, no. 8, pp. 581-589, 1996.
19. M. Takahashi, Y. Itoh, and M. Toyoda, Reduction of Thermal Stress in Tungsten/Copper Graded Composites: Development of Tungsten/Copper Graded Composite by Sintering and Infiltration Technique (Report 2), J. Welding, vol. 12, no. 4, pp. 575-581, 1994. (Japanese)
20. Y. Itoh, M. Takahashi, T. Okamura, and M. Toyota, Thermal Stress Mitigating Properties for Graded Thermal Barrier Coatings of Gas Turbine, Japan Soc. Mech. Eng., Ser. A, vol. 61, no. 583, pp. 614-619, 1995.
21. Y. Sugano, S. Kataoka, and K Tanaka, Analysis of Transient Stresses in a Hollow Circular Cylinder of Functionally Gradient Material with Temperature-Dependent Material Properties, Japan Soc. Mech. Eng., Ser. A, vol. 59, no. 562, pp. 1505-1513, 1993.
22. T. Ishizuka and K Kawashima, Residual Thermal Stresses in Ceramic/Metal Functionally Gradient Material Plates, Japan Soc. Mech. Eng., Ser. A, vol. 60, no. 571, pp. 748-755, 1994.
23. S.-P. Jeon, Y. Tanigawa, and D. Sone, Analytical Treatment of Axisymmetrical Thermoelastic Field with Kassir’s Nonhomogeneous Material Properties and Its Adaptation to Boundary Value Problem of Slab under steady Temperature Field, J. Thermal Stresses, vol. 20, pp. 325-343, 1997.
24. Y. Tanigawa, S.-P. Jeon, and D. Sone, Formulation of Axisymmetric Thermoelastic Problem for Kassir’s Nonhomogeneous Medium and Its Analytical Development of Thermal Stresses for Semi-Infinite Body, Japan Soc. Mech. Eng., Ser. A, vol. 63, no. 605, pp. 94-101, 1997.
25. F. Erdogan and B. H. Wu, Analysis of FGM Specimens for Fracture Toughness Testing, in J. B. Holt et al. (eds.), Ceramic Trans. Functionally Gradient Materials, vol. 34, pp. 39-46, The American Ceramic Society, 1993.
26. Z.-H. Jin and N. Noda, Edge Crack in a Nonhomogeneous Half Plane under Thermal Loading, J. Thermal Stresses, vol. 17, no. 4, pp. 591-599, 1994.
27. Z.-H. Jin and N. Noda, Minimization of Thermal Stress Intensity Factors for a Crack in a Metal-Ceramics Mixture, in J. B. Holt et al. (eds.), Ceramic Trans. Functionally Gradient Materials, pp. 47-54, vol. 34, The American Ceramic Society, 1993.
28. N. Noda and Z.-H. Jin, Steady Thermal Stresses in an Infinite Non-homogeneous Elastic Solid Containing a Crack, J. Thermal Stresses, vol. 16, no. 2, pp. 181-196, 1993.
29. N. Noda and Z.-H. Jin, Thermal Stress Intensity Factors for a Crack in a Strip of Functionally Gradient Material, Int. J. Solids Structures, vol. 30, no., 8, pp. 1039-1056, 1993.
30. Z.-H. Jin and N. Noda, An Internal Crack Parallel to the Boundary of a Nonhomogeneous Half Plane under Thermal Loading, Int. J. Engrg. Sci., vol. 31, no. 5, pp. 793-806, 1993.
31. N. Noda, Thermal Stresses Intensity Factor for Functionally Gradient Plate with an Edge Crack, J. Thermal Stresses, vol. 20, pp. 373-387, 1997.
32. Z.-H. Jin and R. C. Batra, Stress Intensity Relaxation at the Tip of an Edge Crack in a Functionally Graded Material Subjected to a Thermal Shock, J. Thermal Stresses, vol. 19, no. 4, pp. 317-339, 1996.
33. N. Noda and Z.-H. Jin, Transient Thermal Stress Intensity Factors for a Crack in a Semi-Infinite Plate of a Functionally Gradient Material, Int. J. Solids Struct, vol. 31, no. 2, pp. 203-218, 1994.
34. N. Noda and Z.-H. Jin, A Crack in a Functionally Gradient Material under Thermal Shock, Arch. Appl. Mech., vol. 64, no. 2, pp. 99-110, 1994.
35. M. Nemat-Alla and N. Noda, Study of an Edge Crack Problem in a Semi-Infinite Functionally Graded Medium with Two Dimensionally Nonhomogeneous Coefficients of Thermal Expansion under Thermal Load, J. Thermal Stresses, vol. 19, no. 9, pp. 863-888, 1996.
36. M. Nemat-Alla and N. Noda, Thermal Stress Intensity Factor for Functionally Gradient Half Space with an Edge Crack under Thermal Load, Arch. Appl. Mech., vol. 66, no. 8, pp. 569-580, 1996.
37. F. Erdogan and B. H. Wu, Crack Problems in FGM Layers under Thermal Stresses, J. Thermal Stresses, vol. 19, no. 3, pp. 237-265, 1996.
38. F. Mizuguchi and H. Ohnabe, Large Deflections of Heated Functionally Graded Clamped Rectangular Plates with Varying Rigidity in Thickness Direction, Function Graded Material 1996, pp. 81-86, Elsevier, Amsterdam, 1997.
39. F. Mizuguchi and H. Ohnaba, Large Deflections of Heated Functionally Graded Simply Supported Rectangular Plates with Varying Rigidity in Thickness Direction, Proc. Amer. Soc. Compos., vol. 11, pp. 957-966, 1996.
40. M. P. Lutz and R. W. Zimmerman, Thermal Stresses and Effective Thermal Expansion Coefficient of a Functionally Gradient Sphere, J. Thermal Stresses, vol. 19, no. 1, pp. 39-54, 1996.
41. Y. Obata and N. Noda, Transient Thermal Stresses in a Plate of Functionally Gradient Material, in J. B. Holt et al. (eds.), Ceramic Trans. Functionally Gradient Materials, vol. 34, pp. 403-410, The American Ceramic Society, 1993.
42. Y. Obata and N. Noda, Unsteady Thermal Stresses in a Functionally Gradient Material Plate (Influence of Heating and Cooling Conditions on Unsteady Thermal Stresses), Japan Soc. Mech. Eng., Ser. A, vol. 59, no. 560, pp. 1097-1103, 1993.
43. Y. Obata and N. Noda, Unsteady Thermal Stresses in a Functionally Gradient Material Plate (Analysis of One-Dimensional Unsteady Heat Transfer Problem), Japan Soc. Mech. Eng., Ser. A, vol. 59, no. 560, pp. 1090-1096, 1993.
44. Y. Obata and N. Noda, Steady Thermal Stresses in a Hollow Circular Cylinder and a Hollow Sphere of a Functionally Gradient Material, J. Thrermal Stresses, vol. 17, no. 3, pp. 471-487, 1994.
45. D.-K. Choi and C.-S. Kim, An Analytical Study on Unsteady Thermal Stresses of Functionally Graded Materials, Trans. Korean Soc. Mech. Eng., Ser. A, vol. 21, no. 9, pp. 1441-1451, 1997.
46. D.-K. Choi and C.-S. Kim, A Study on Relaxation of Thermal Stresses of Heat-Resistant Systems, Trans. Korean Soc. Mech. Eng., Ser. A, vol. 22, no. 1, pp. 16-22, 1998.
47. S. Nomura and D. M. Sheahen, Green’s Function Approach to the Analysis of Functionally Graded Materials, Amer. Soc. Mech. Eng. Mater. Div., vol. 80, pp. 19-23, 1997.
48. S. Nomura and D. M. Sheahen, Micromechanical Approach to the Thermomechanical Analysis of FGMs, Function Graded Material 1996, pp. 137-141, Elsevier, Amsterdam, 1997.
49. J. K. Mackenzie, The Elastic Constants of a Solid Containing Spherical Holes, Proc. Phys. Soc. London, vol. 63, pp. 2-11, 1950.
50. E. H. Kerner, The Elastic and Thermoelastic Properties of Composite Media, Proc. Phys. Soc. London, Ser. B, vol. 69, pp. 808-813, 1956.
51. P. S. Turner, Thermal Expansion Stresses in Reinforced Plates, J. Res. National Bureau of Standards, vol. 37, RP 1745, p. 239, 1946.
52. L. I. Tuchinskii, Poroshkovaya Mettugia, no. 7, pp. 85-92, 1983.
53. J. D. Eshelby, Proc. Phys. Soc., vol. A241, p. 376-396, 1957.
54. J. D. Eshelby, Proc. Phys. Soc., vol. A252, p. 561-569, 1959.
55. M. Uemura and N. Yamada, Elastic Constant of Carbon Fiber Reinforced Plastic Materials, Japan Soc. Mat. Sci., vol. 24, no. 257, pp. 156-163, 1975.
56. S. Suresh and A. Mortensen, Functionally Graded Metals and Metal-ceramic Compositions: Part 2 Thermomechanical Behavior, Int. Mat. Rev., vol. 42, no. 3, pp. 55-116, 1997.
57. N. Noda and T. Tsuji, Steady Thermal Stresses in a Plate of Functionally Gradient Material, Japan Soc. Mech. Eng., Ser. A, vol. 57, no. 535, pp. 625-631, 1991.
58. N. Noda and T. Tsuji, Steady Thermal Stresses in a Plate of Functionally Gradient Material with Temperature-Dependent Properties, Japan Soc. Mech. Eng., Ser. A, vol. 57, no. 533, pp. 98-103, 1991.
59. K Tanaka, Y. Tanaka, H. Watanabe, V. F. Poterasu, and Y. Sugano, An Improved Solution to Thermoelastic Material Design in Functionally Gradient Materials: Scheme to Reduced Thermal Stresses, Comput Methods Appl. Mech. Eng., vol. 109, no. 3/4, pp. 377-389, 1993.
60. J. C. Han, S. Zhao, and S. Y. Du, Residual Thermal Stress Analysis and Design of Functionally Gradient Coatings on Carbon-Carbon Composites, Proc. Int. Conf. Compos. Mater., vol. 10, no. 4, pp. IV.673-IV.678, 1995.
61. N. Frage, M. P. Dariel, U. Admon, and A. Raveh, Residual Thermal Stresses in Functionally Graded Ti-TiCx Materials, Function Graded Material 1996, pp. 397-402, 1997.
62. Y. Obata, N. Noda, and T. Tsuji, Steady Thermal Stresses in a Functionally Gradient Material Plate (Influence of Mechanical Boundary Conditions), Japan Soc. Mech. Eng., Ser. A, vol. 58, no. 553, pp. 1689-1695, 1992.
63. K Tanaka, H. Watanabe, Y. Sugano, and V. F. Poterasu, Multicritical Material Tailoring of a Hollow Cylinder in Functionally Gradient Materials: Scheme to Global Reduction of Thermoelastic Stresses, Comput Methods Appl. Mech. Eng., vol. 135, no. 3/4, pp. 369-380, 1996.
64. Y. Fukui, N. Yamanaka, and K Wakashima, The Stresses and Strains in a Thick-Walled Tube for Functionally Graded Material under Uniform Thermal Loading, JSME Int. J., Ser. A, vol. 36, no. 2, pp. 156-162, 1993.
65. Y. Fukui, H. Yonekura, Y. Watanabe, and K Nakanishi, Evaluation of Residual Stress in a Thick-Walled Ring for Al-SiC Functionally Gradient Material, Japan Soc. Mech. Eng., Ser. A, vol. 60, no. 574, pp. 1384-1389, 1994.
66. V. F. Poterasu, K Tanaka, and Y. Sugano, Stochastic FEM Formulation of Thermoelastic Behavior in Functionally Gradient Materials, Bull. Tokyo Metro Inst. Tech., no. 8, pp. 83-88, 1994.
67. K Tanaka, Y. Tanaka, H. Watanabe, V. F. Poterasu, and Y. Sugano, An Improved Solution to Thermoelastic Material Design in Functionally Gradient Materials: Scheme to Reduced Thermal Stresses, Comput Methods Appl. Mech. Eng., vol. 109, no. 3/4, pp. 377-389, 1993.
68. Y. Y. Yang, Stress Analysis in a Joint with a Functionally Graded Material under a Thermal Loading by Using the Mellin Transform Method, Int. J. Solids Structures, vol. 35, no. 12, pp. 1261-1287, 1998.
69. Y.-D. Lee and F. Erdogan, Residual Thermal Stresses in FGM and Laminated Thermal Barrier Coatings, Int. J. Fract., vol. 69, no. 2, pp. 145-165, 1994-1995.
70. S. Takezono, K Tao, E. Inamura, and M. Inoue, Thermal Stress and Deformation in Functionally Graded Material Shells of Revolution under Thermal Loading due to Fluid, JSME Int. J., Ser. A, vol. 39, no. 4, pp. 573-581, 1996.
71. Y. Arai, H. Kobayashi, and M. Tamura, Analysis on Residual Stress of Functionally Gradient Material and Its Optimum Material Design, Japan Soc. Mech. Eng., Ser. A, vol. 57, no. 535, pp. 620-624, 1991.
72. Y. Arai, H. Kobayashi, and M. Tamura, Elasto-Plastic Thermal Stress Analysis for Optimum Material Design of Functionally Gradient Material, Japan Soc. Mech. Eng., Ser. A, vol. 59, no. 559, pp. 849-855, 1993.
73. J. Aboudi, M.-J. Pindera, and S. M. Arnold, Thermo-inelastic Response of Functionally Graded Composites, Int. J. Solids Struct, vol. 32, no. 12, pp. 1675-1710, 1995.
74. J. Aboudi, M.-J. Pindera, and S. M. Arnold, Thermoelastic Theory for the Response of Materials Functionally Graded in Two Directions, Int. J. Solids Struct., vol. 33, no. 7, pp. 931-966, 1996.
75. J. Aboudi, M.-J. Pindera, and S. M. Arnold, Thermoplasticity Theory for Bidirectionally Functionally Graded Materials, J. Thermal Stresses, vol. 19, no. 9, pp. 809-861, 1996.
76. T. Fuchiyama, N. Noda, T. Tsuji, and Y. Obata, Transient Thermal Stress in a Circular Plate of Functionally Gradient Materials with Temperature-Dependent Material Properties, Japan Soc. Mech. Eng., Ser. A, vol. 59, no. 564, pp. 1925-1930, 1993.
77. N. Noda, Thermal Stresses in Functonally Gradient Materials, Int. J. Soc. Materials Engrg. Res., vol. 3, no. 1, pp. 95-114, 1995.
78. Y. Tanigawa, Theoretical Approach of Optimum Design for a Plate of Functionally Gradient Materials under Thermal Loadings, in G. A. Schneider and G. Petzow (eds.), Thermal Shock and Thermal Fatigue Behavior of Advanced Ceramics, pp. 171-180, Kluwer Academic Publishers, Dordrecht, 1993.
79. J. C. Han, S. Zhao, and S. Y. Du, Residual Thermal Stress Analysis and Design of Functionally Gradient Coatings on Carbon-Carbon Composites, Proc. Int. Conf. Compos. Mater., vol. 10, no. 4, pp. IV.673 IV.678, 1995.
80. S. Sumi and A. Murozono, Unsteady Thermal Stresses in Plates of Functionally Gradient Materials, Bull. Kurume Inst. Tech., no. 19, pp. 17-24, 1995.
81. G. N. Praveen and J. N. Reddy, Nonlinear Transient Thermoelastic Analysis of Functionally Graded Ceramic-Metal Plates, Int. J. Solids Structures, vol. 35, no. 33, pp. 4457-4478, 1998.
82. N. Sumi and Y. Sugano, Thermally Induced Stress Waves in Functionally Graded Materials with Temperature-Dependent Material Properties, J. Thermal Stresses, vol. 20, no. 3/4, pp. 281-294, 1997.
83. N. Sumi and Y. Sugano, Dynamic Thermal Stresses in a Functionally Graded Material with Temperature-Dependent Material Properties, Japan Soc. Mech. Eng., Ser. A, vol. 61, no. 590, pp. 2296-2301, 1995.
84. N. Sumi, H. Monna, and Y. Sugano, Dynamic Thermal Stresses in a Composite Hollow Circular Cylinder with an Interlayer of Functionally Graded Material, Japan Soc. Mech. Eng., Ser. A, vol. 62, no. 597, pp. 1189-1196, 1996.
85. N. Sumi, H. Monna, and Y. Sugano, Japan Soc. Mech. Eng., Ser. A, vol. 64, no. 618, pp. 333-338, 1998.
86. T. Ohyoshi and G. J. Sui, Backscatter of Elastic Wave from a Thermally Affected Inhomogeneous Layer, J. Thermal Stresses, vol. 20, no. 3/4, pp. 363-371, 1997.
87. Y. Fukui, H. Yonekura, Y. Watanabe, and K Nakanishi, Evaluation of Residual Stress in a Thick-Walled Ring for Al-SiC Functionally Gradient Material, H. Yonekura and Y. Watanabe (eds.), Japan Soc. Mech. Eng., Ser. A, vol. 60, no. 574, pp. 1384-1389, 1994.
88. J.-K Lim and J.-H. Song, Thermal Stress Analysis of Functionally Graded Ceramic/Metal Composites. (II) Sintering Material, Trans. Korean Soc. Mech. Eng., Ser. A, vol. 21, no. 10, pp. 1571-1579, 1997.
89. J.-H. Song, J.-K. Lim, and S.-H. Chung, Thermal Stress Analysis of Functionally Graded Ceramic/Metal Composites (I). Plasma Spraying Material, Trans. Korean Soc. Mech. Eng., Ser. A, vol. 21, no. 3, pp. 439-446, 1997.
90. J.-H. Wang, J.-I. Deng, and Q.-J. Zhang, Thermo Elastic-Plastic Stress Analysis of Ceramic-Metal Graded Materials, Proc. Int. Conf. Compos. Mater., vol. 10, no. 4, pp. IV.695-IV.702, 1995.
91. Q. Zhang, P. Zhai, and R. Yuan, Model Investigation of Ceramic-Metal FGMs under Dynamic Thermal Loading: Residual Stress Effect, Thermal-Mechanical Coupling Effect and Materials Hardening Model Effect, Function Graded Material 1996, pp. 87-92, Elsevier, Amsterdam, 1997.
92. A. E. Giannakopoulos, M. Olsson, S. Suresh, and M. Finot, Elastoplastic Analysis of Thermal Cycling: Layered Materials with Compositional Gradients, Acta. Metall. Mater., vol. 43, no. 4, pp. 1335-1354, 1995.
93. M. Ooki, M. Mutoh, T. Towada, S. Adachi, and M. Takahashi, Characteristics of Thermal Cycle Damage of FGM Thermal Barrier Coatings in Vacuum, J. Mat Sci., vol. 46, no. 8, pp. 939-945, 1997.
94. C. Y. Jian, T. Hashida, H. Tahashi, and M. Saito, Thermal Shock and Fatigue Resistance Evaluation of Functionally Graded Coating for Gas Turbine Blades by Laser Heating Method, Compos. Eng., vol. 5, no. 7, pp. 879-889, 1995.
95. A. Kumakawa and M. Niino, Thermal Fatigue Characteristics of Functionally Gradient Materials under High Temperature Gradient Conditions, Amer. Soc. Mech. Eng., Mater. Div., vol. 44, pp. 197-207, 1993.
96. T. Asakawa, N. Noda, K Tohgoh, and T. Tsuji, Constitutional Equations of Thermal Stresses of Particle-Reinforced Composite Materials, Japan Soc. Mech. Eng., Ser. A, vol. 60, no. 575, pp. 1632-1637, 1994.
97. N. Noda, S. Nakai, and T. Tsuji, Thermal Stresses in Functionally Graded Material of Particle-Reinforced Composite, JSME Int. J., Ser. A, vol. 41, no. 2, pp. 178-184, 1998.
98. M.-J. Pindera, J. Aboudi, and S. M. Arnold, Microstructural Effects in Functionally Graded Thermal Barrier Coatings, Function Graded Material 1996, pp. 113-121, Elsevier, Amsterdam, 1997.
99. T. Ishizuka, C. S. Kang, and K. Wakashima, Thermomechanical Response Characteristics of ZrO2/Ni Functionally Graded Materials: An Experimental Study to Check Model Predictions, Function Graded Material 1996, pp. 131-136, Elsevier, Amsterdam, 1997.
100. T. Okamura, Y. Itoh, T. Kobayashi, and M. Takashahi, Analysis of Thermal Stresses in Graded Thermal Barrier Coatings Using Particle Dispersion Modeling, Japan Soc. Mech. Eng., Ser. A, vol. 62, no. 602, pp. 2310-2318, 1996.
101. M. Dao, P. Gu, A. Maewal, and R. J. Asaro, A Micromechanical Study of Residual Stresses in Functionally Graded Materials, Acta Mater., vol. 45, no. 8, pp. 3265-3276, 1997.
102. P. Kwon and C. K H. Dharan, Gradient Material Design of Particulate Reinforced Composite Structures, Amer. Soc. Mech. Eng. Mater. Div., vol. 69, no. 1, pp. 89-104, 1995.
103. T. Makino and M. Yamamoto, The Rules of Mixture on Physical Properties of Composite Materials with Network Structure, Testu to Kou, vol. 82, no. 1, pp. 81-86, 1996.
104. H. E. Pettermann, E. Weissenber, and S. Suresh, Simulation of the Elasto-plastic Deformations in Compositionally Graded Metal-Ceramic Structures: Means-Field and Unit Cell Approach, Function Graded Material 1996, pp. 75-80, Elsevier, Amsterdam, 1997.
105. T. Reiter, G. J. Dvorak, and D. V. Tvergaar, Micromechanical Models for Graded Composite Materials, J. Mech. Phys. Solids, vol. 45, no. 8, pp. 1281-1302, 1997.
106. M. Dao, P. Gu, A. Maewal, and R. J. Asaro, A Micromechanical Study of Residual Stresses in Functionally Graded Materials, Acta. Mater., vol. 45, no. 8, pp. 3265-3276, 1997.
107. A. Kawasaki and R. Watanabe, Thermal Shock Fracture Mechanism of Metal/Ceramic Functionally Gradient Materials, NATO ASI, Ser. E, vol. 241, pp. 509-520, 1993.
108. R. Watanabe, A. Kawasaki, and Y. Mukaida, Fabrication of AIN/W Thermal Barrier Type of Functionally Gradient Material and Its Thermal Shock Behavior. Adv. Powder Metal Part Mater. (USA), vol. 1996, no. 5, pp. 1651-1657, 1996.
109. A. Kawasaki, R. Watanabe, M. Yuki, Y. Nakanishi, and H. Onabe, Effect of Microstructure on Thermal Shock Cracking of Functionally Graded Thermal Barrier Coatings Studied by Burner Heating Test, Mater. Trans. JIM, vol. 37, no. 4, pp. 788-795, 1996.
110. R. Kawasaki, R. Watanabe, and C.-H. Yeh, Effect of Graded Compositional Profile on Thermal Shock Cracking of Functionally Graded Materials as Studied by Burner Heating Test, Bull. Function Graded Materials, vol. 8, pp. 19-24, 1996.
111. A. Kawasaki and R. Watanabe, Effect of Gradient Microstructure on Thermal Shock Crack Extension in Metal Ceramic Functionally Graded Materials, Function Graded Material 1996, pp. 143-148, Elsevier, Amsterdam, 1997.
112. Y. Wakamatsu, T. Saito, S. Ueda, and M. Niino, Development of a Thermal Shock Evaluation Device for Functionally Gradient Materials for Aerospace Applications, NATO ASI, Ser. E, vol. 241, pp. 555-565, 1993.
113. G. Bao and L. Wang, Multiple Cracking in Functionally Graded Ceramic/Metal Coatings, Int. J. Solids Struct., vol. 32, no. 19, pp. 2853-2871, 1995.
114. K Kokini, Y. R. Takeuchi, and B. D. Choules, Thermal Fracture Mechanisms in Functionally Graded Coatings, Function Graded Material 1996, pp. 149-154, Elsevier, Amsterdam, 1997.
115. K Kokini and M. Case, Initiation of Surface and Interface Edge Cracks in Functionally Graded Ceramic Thermal Barrier Coatings, J. Engrg. Mat Tech., vol. 119, no. 1, pp. 148-152, 1997.
116. H. Takahashi, T. Ishikawa, D. Okugawa, and T. Hashida, Laser and Plasma-Arc Thermal Shock/Fatigue Fracture Evaluation Procedure for Functionally Gradient Materials, NATO ASI, Ser. E, vol. 241, pp. 543-554, 1993.
117. C. Y. Jian, T. Hashida, H. Takahashi, and M. Saito, Thermal Shock and Fatigue Resistance Evaluation of Functionally Graded Coating for Gas Turbine Blades by Laser Heating Method, Compos. Eng., vol. 5, no. 7, pp. 879-889, 1995.
118. A. Kumakawa and M. Niino, Thermal Fatigue Characteristic of Functionally Gradient Materials for Aerospace Applications, NATO ASI, Ser. E, vol. 241, pp. 543-554, 1993.
119. A. Kumakawa and M. Niino, Thermal Fatigue Characteristics of Functionally Gradient Materials under High Temperature Gradient Conditions, Amer. Soc. Mech. Eng., Mater. Div., vol. 44, pp. 197-207, 1993.
120. A. Kumakawa, M. Sasaki, M. Takahashi, Z. Lianmeng, and T. Hirri, Cyclic Thermal Shock of TiC-Ni3Al FGMs, Bull. Function Graded Materials, vol. 8, pp. 55-60, 1996.
121. M. Ohki, M. Mutoh, T. Towada, S. Adachi, and M. Takahashi, Characteristics of Thermal Cycle Damage of FGM Thermal Barrier Coatings in Vacuum, J. Soc. Mat. Sci., vol. 46, no. 8, pp. 939-945, 1997. (Japanese)
122. K Barthel and B. Ilschner, Thermal Fatigue of Components with Compositional Gradients of Multiphase NiAl-X and Alloy IN 738, Z. Metallkd, vol. 88, no. 8, pp. 659-665, 1997.
123. Z.-H. Jin and N. Noda, Crack-Tip Singular Fields in Nonhomogeneous Materials, Trans. ASME, J. Appl. Mech., vol. 61, no. 3, pp. 738-740, 1994.
124. N. Noda and Z. Jin, Stress Singularity of Nonhomogeneous Body with Crack in Thermal Stress Fields, JSME Int. J., Ser. A, vol. 38, no. 3, pp. 364-369, 1995.
125. F. Erdogan and Y. F. Chen, Interfacial Cracking of FGM/ Metal Bonds, Amer. Soc. Mech. Eng., Mater. Div., vol. 44, pp. 29-37, 1993.
126. Y. F. Chen and F. Erdogan, The Interface Crack Problem for a Nonhomogeneous Coating Bonded to a Homogeneous Substrate, J. Mech. Phys. Solids, vol. 44, no. 5, pp. 771-787, 1996.
127. F. Erdogan and B. H. Wu, The Surface Crack Problem for a Plate with Functionally Graded Properties, Trans. ASME J. Appl. Mech. (USA), vol. 64, no. 3, pp. 449-456, 1997.
128. F. Erdogan and M. Ozturk, Periodic Cracking of Functionally Graded Coatings, Int. J. Eng. Sci., vol. 33, no. 15, pp. 2179-2195, 1995.
129. M. Ozturk and F. Erdogan, Mode I Crack Problem in an Inhomogeneous Orthotropic Medium, Int. J. Engrg. Sci., vol. 35, no. 9, pp. 869-883, 1997.
130. F. Erdogan, Fracture Mechanics of Graded Materials, Function Graded Material 1996, pp. 105-122, Elsevier, Amsterdam, 1997.
131. F. Erdogan, Fracture Mechanics of Functionally Graded Materials (Final Rept. 1, Apr. 93-31, August 1996), AD Rep (AD-A-326172), 62 pp., 1996.
132. X. Wang, Z. Zou, and D. Wang, On the Penny-Shaped Crack in a Nonhomogeneous Interlayer of Adjoining Two Different Elastic Materials, Int. J. Solids Structures, vol. 34, no. 30, pp. 3911-3921, 1997.
133. T. Fett and D. Munz, A Weight Function for Cracks in Gradient Materials, Int. J. Fract. (NLD), vol. 84, no. 1, pp. L3-L7, 1997.
134. H. J. Choi, Bonded Dissimilar Strips with a Crack Perpendicular to the Functionally Graded Interface, Int. J. Solids Struct., vol. 33, no. 28, pp. 4101-4117, 1996.
135. G. Bao and L. Wang, Multiple Cracking in Functionally Graded Ceramic/Metal Coatings, Int. J. Solids Struct., vol. 32, no. 19, pp. 2853-2871, 1995.
136. M. Nakagaki, M. Matsukawa, and A. Inaba, Study of Crack in Functionally Gradient Materials, Amer. Soc. Mech. Eng., Press Vessels Pip. Div., vol. 260, pp. 95-100, 1993.
137. G. Exadaktylos, Gradient Elasticity with Surface Energy: Mode-I Crack Problem, Int. J. Solids Structures, vol. 35, no. 5-6, pp. 421-456, 1998.
138. H. Cai and G. Bao, Crack Bridging in Functionally Graded Coatings, Int. J. Solids Structures, vol. 35, no. 7-8, pp. 701-717, 1998.
139. L. L. Shaw, The Crack Driving Force of Functionally Graded Materials, J. Mater. Sci. Lett., vol. 17, no. 1, pp. 65-67, 1997.
140. Z.-H. Jin and R. C. Batra, R-Curve and Strength Behavior of a Functionally Graded Material, Mater. Sci. Eng., Ser. A, vol. A242, no. 1-2, pp. 70-76, 1998.
141. Z.-H. Jin and R. C. Batra, Some Basic Fracture Mechanics Concepts in Functionally Graded Materials, J. Mech. Phys. Solids, vol. 44, no. 8, pp. 1221-1235, 1996.
142. P. Gu and R. J. Asaro, Crack Deflection in Functionally Graded Materials, Int. J. Solids Struct. (GBR), vol. 34, no. 24, pp. 3085-3098, 1997.
143. Z.-H. Jin and R. C. Batra, Thermal Fracture of Ceramics with Temperature-Dependent Properties, J. Thermal Stresses, vol. 21, pp. 157-176, 1998.
144. J. Rohde and S. Schmauder, Influence of a Functionally Gradient Surface on Cracking in WC/ Co Hard Metals, Fract. Mech. Ceram., vol. 12, pp. 487-497, 1996.
145. T. E. Jin, H. J. Choi, and K. Y. Lee, The Problem of Collinear Cracks in a Layered Half-Plane with a Functionally Graded Nonhomogeneous Interfacial Zone, Trans. Korean Soc. Mech. Eng., Ser. A, vol. 20, no. 4, pp. 1275-1289, 1996.
146. M. Nakagaki, Y. Shibata, R. Kuranari, and S. Hagihara, Elastoplastic Crack Analysis of Thermally Shocked Functionally Graded Material with Neural Network Application, Amer. Soc. Mech. Eng., Press Vessels Pip. Div., vol. 304, pp. 115-120, 1995.
147. S.-P. Jeon and Y. Tanigawa, Theoretical Analysis of Thermal Stress Intensity Factor for Nonhomogeneous Medium with a Penny-Shaped Crack, Proc. Thermal Stresses’97, pp. 23-26, Rochester, 1997.
148. M. Nemat-Alla and N. Noda, Thermal Stress Intensity Factor for Functionally Gradient Half Space with an Edge Crack under Thermal Load, submitted.
149. K. Kokini and M. Case, Initiation of Surface and Interface Edge Cracks in Functionally Graded Ceramic Thermal Barrier Coatings, Trans. ASME J. Eng. Mater. Tech. (USA), vol. 119, no. 2, pp. 148-152, 1997.
150. K. Kokini and B. D. Choules, Surface Thermal Fracture of Functionally Graded Ceramic Coatings: Effect of Architecture and Materials, Compos. Eng., vol. 5, no. 7, pp. 865-877, 1995.
151. J.-H. Song and J.-K. Lim, A Study on Thermal Shock Characteristics of Functionally Gradient Ceramic/Metal Composites, Trans. Korean Soc. Mech. Eng., Ser. A, vol. 20, no. 7, pp. 2134-2140, 1996.
152. N. Noda, T. Kurata, T. Fuchiyama, T. Tsuji, and Y. Obata, Thermal Stress Analysis in Functionally Gradient Plate with a Crack, Japan Soc. Mech. Eng., Ser. A, vol. 62, no. 601, pp. 2015-2020, 1996.
153. M. Nakagaki, Y. D. Wu, Y. Shibata, K. Ookawara, and S. Hagihara, Fracture of Heat Shield Type FGM Structure Subjected to Thermal Shock: Elasto-plastic Analysis and Crack Arrest, Bull. Function Graded Materials, vol. 8, pp. 43-48, 1996.
154. T. Fujimoto and N. Noda, Crack Propagation in a Functionally Graded Material Plate under Thermal Loading, Proc. Thermal Stresses’97, pp. 147-150, Rochester, 1997.