Stress intensity relaxation at the tip of an edge crack in a functionally graded material subjected to a thermal shock

Journal of Thermal Stresses

Volumn 19, Issue 4, 1996, Pages 317-339

  Jin, Zhi He ^a   Batra, R C ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COOLING; CRACKS; ELASTIC MODULI; INTEGRAL EQUATIONS; MATHEMATICAL MODELS; SHOCK PROBLEMS; STRESS INTENSITY FACTORS; STRESS RELAXATION; THERMAL CONDUCTIVITY; THERMAL STRESS; VOLUME FRACTION;

COMPRESSIVE STRESS; EDGE CRACKED TIP; FUNCTIONALLY GRADED MATERIAL; SHEAR MODULUS; STRESS INTENSITY RELAXATION; TENSILE THERMAL STRESS; THERMAL SHOCK; THERMAL STRESS INTENSITY FACTORS; THREE PHASE MODEL;

COMPOSITE MATERIALS;

EID: 0030171889     PISSN: 01495739     EISSN: 1521074X     Source Type: Journal    
DOI: 10.1080/01495739608946178     Document Type: Article

References (35)

1. D. P. H. Hassetman and G. E. Youngblood, Enhanced Thermal Stress Resistance of Structural Ceramics with Thermal Conductivity Gradient, J. Amer. Ceram. Soc., vol. 61, pp. 49-52, 1978.
2. K. Satyamurthy, D. P. H. Hasselman, J. P. Singh, and M. P. Kamat, Effect of Spatial Variation of Thermal Conductivity on Magnitude of Tensile Thermal Stresses in Brittle Materials Subjected to Convective Heating, in D. P. H. Hasselman and R. A. Heller (eds.), Thermal Stresses in Severe Environments, pp. 325-342, Plenum Press, New York, 1980.
3. M. Koizumi, The Concept of FGM, in J. B. Holt, M. Koizumi, T. Hirai, and Z. A. Munir (eds.), Functionally Gradient Materials, Ceramic Trans., vol. 34, pp. 3-10, American Ceramic Society, Westerville, OH, 1993.
4. N. Noda and T. Tsuji, Steady Thermal Stresses in a Plate of a Functionally Gradient Material, in M. Yamanouchi, M. Koizumi, T. Hirai, and I. Shiota (eds.), Proc. 1st Int. Symp. on Functionally Gradient Materials, pp. 339-344, Sendai, Japan, 1990.
5. X. F. Tang, L, M. Zhang, Q. J. Zhang, and R. Z. Yuan, Design and Structural Control of PSZ-Mo Functionally Gradient Materials with Thermal Stress Relaxation, in J. B. Holt, M. Koizumi, T. Hirai, and Z. A. Munir (eds.), Functionally Gradient Materials, Ceramic Trans., vol. 34, pp. 457-463, American Ceramic Society, Westerville, OH, 1993.
6. Y. Arai, H. Kobayashi and T. Tamura, Elastic-Plastic Thermal Stress Analysis for Optimum Design of Functionally Gradient Material, in Thermal Stress’95, Proc. 1st Int. Symp. on Thermal Stresses and Related Topics, pp. 355-358, Shizuoka University, Hamamatsu, Japan, June 1995.
7. A. Kawasaki and R. Watanabe, Finite Element Analysis of Thermal Stress of the Metal/Ceramic Multi-Layer Composites with Controlled Compositional Gradients, J. Japan Inst. Metals, vol. 51, pp. 525-529, 1987. (in Japanese)
8. J. T. Drake, R. L. Williamson, and B. H. Rabin, Finite Element Analysis of Thermal Residual Stresses at Graded Ceramic-Metal Interfaces, Part II: Interface Optimization for Residual Stress Reduction, J. Appl. Phys., vol. 74, pp. 1321-1326, 1993.
9. A. Kawasaki and R. Watanabe, Fabrication of Disk-Shaped Functionally Gradient Materials by Hot Pressing and Their Thermomechanical Performance, in J. B. Holt, M. Koizumi, T. Hirai, and Z. A. Munir (eds.), Functionally Gradient Materials, Ceramic Trans., vol. 34, pp. 157-164, American Ceramic Society, Westerville, OH, 1993.
10. H. Takahashi, T. Ishikawa, D. Okugawa, and T. Hashida, Laser and Plasma-ARC Thermal Shock/Fatigue Fracture Evaluation Procedure for Functionally Gradient Materials, in G. A. Schneider and G. Petzow (eds.), Thermal Shock and Thermal Fatigue Behavior of Advanced Ceramics, pp. 543-554, Kluwer Academic Publ., Dordrecht, 1993.
11. C. Atkinson and R. D. List, Steady State Crack Propagation into Media with Spatially Varying Elastic Properties, Int. J. Engrg Sci., vol. 16, pp. 717-730, 1978.
12. R. S. Dhaliwal and B. M. Singh, On the Theory of Elasticity of a Non-Homogeneous Medium, J. Elasticity, vol. 8, pp. 211-219, 1978.
13. F. Delale and F. Erdogan, The Crack Problem for a Nonhomogeneous Plane, ASME J. Appl. Mech., vol. 50, pp. 609-614, 1983
14. Z.-H. Jin and N. Noda, /in Internal Crack Parallel to the Boundary of a Nonhomogeneous Half Plane under Thermal Loading, Int. J. Engrg Sci., vol. 31, pp. 793-806, 1993.
15. N. Noda and Z.-H. Jin, Thermal Stress Intensity Factors for a Crack in a Strip of a Functionally Gradient Material, Internal. J. Solids Structures, vol. 30, pp. 1039-1056, 1993.
16. F. Erdogan and B. H. Wu, Analysis of FGM Specimens for Fracture Toughness Testing, in J. B. Holt, K. Koizumi, T. Hirai, and Z. A. Munir (eds.), Functionally Gradient Materials, Ceramic Trans., vol. 34, pp. 39-46, Americ an Ceramic Society, Westerville, OH, 1993.
17. N. Noda and Z.-H. Jin, A Crack in Functionally Gradient Materials Under Thermal Shock, Arch. Appl. Mech., vol. 64, pp. 99-110, 1994.
18. Z.-H. Jin and N. Noda, Transient Thermal Stress Intensity Factors for a Crack in a Semi-Infinite Plane of a Functionally Gradient Material, Intemat. J. Solids Structures, vol. 31, pp. 203-218, 1994.
19. J. R. Zuiker, Functionally Graded Materials: Choice of Micromechanics Model and Limitations in Property Variation, Composites Engrg., vol. 5, pp. 807-819, 1995.
20. Z.-H. Jin and N. Noda, Crack-Tip Singular Fields in Nonhomogeneous Materials, ASME J. Appl. Mech., vol. 61, pp. 738-740, 1994.
21. J. C. Smith, Simplification of van der Poel’s Formula for the Shear Modulus of a Particulate Composite, J. Research National Bureau of Standards—A. Physics and Chemistry, vol. 79, pp. 419-423, 1975.
22. R. M. Christensen and K. H. Lo, Solutions for Effective Shear Properties in Three Phase Sphere and Cylinder Models, J. Mech. Phys. Solids, vol. 27, pp. 315-330, 1979.
23. R. M. Christensen, Mechanics of Composite Materials, John Wiley & Sons, New York, 1979.
24. V. M. Levin, Thermal Expansion Coefficients of Heterogeneous Materials, Mekh. Tuerd. Tela, vol. 2, pp. 88-94, 1967. (Russian)
25. B. W. Rosen and Z. Hasin, Effective Thermal Expansion Coefficients and Specific Heats of Composite Materials, Intemat. J. Engrg Sci., vol. 8, pp. 157-173, 1970.
26. Z. Hashin and S. Shtrikman, A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase Materials, J. Appl. Phys., vol. 33, p. 3125, 1962.
27. Z.-H. Jin and Y.-W. Mai, Thermal Fracture of Functionally Gradient Ceramics, 6th Intl. Symp. on Fracture Mechanics of Ceramics, Germany, 1995.
28. N. I. Muskhelishvili, Singular Integral Equations, Noordhoff, Groningen, 1953.
29. G. D. Gupta and F. Erdogan, The Problem of Edge Cracks in an Infinite Strip, ASME J. Appl. Mech., vol. 41, pp. 1001-1006, 1974.
30. A. C. Kaya and F. Erdogan, On the Solution of Integral Equations with Strongly Singular Kernels, Quart. Appl Math., vol. 45, pp. 105-122, 1987.
31. A. F. Emery, G. E. Walker, Jr., and J. A. Williams, A Green's Function for the Stress Intensity Factors of Edge Cracks and Its Application to Thermal Stresses, ASME J. Basic Engrg., vol. 91, pp. 618-624, 1969.
32. H. F. Nied, Thermal Shock Fracture in an Edge-Cracked Plate, J. Thermal Stresses, vol. 6, pp. 217-229, 1983.
33. A. E.-F. A. Rizk and S. F. Radwan, Fracture of a Plate Under Transient Thermal Stress, J. Thermal Stresses, vol. 16, pp. 79-102, 1993.
34. X. R. Wu, Application of Weight Function Method for Crack Analysis in Thermal Stress Fields, in G. A. Schneider and G. Petzow (eds.), Thermal Shock and Thermal Fatigue Behaviour of Advanced Ceramics, pp. 119-141, Kluwer Academic Publ., Dordrecht, 1993.
35. Z.-H. Jin and Y.-W. Mai, Effects of Damage on Thermal Shock Strength Behavior of Ceramics, J. Amer. Ceram, Soc., vol. 78, pp. 1873-1881, 1995.