Sensor technology in assembly systems

CIRP Annals - Manufacturing Technology

Volumn 47, Issue 2, 1998, Pages 503-524

  Santochi, M ^a   Dini, G ^a  

^a UNIVERSITY OF PISA   (Italy)

Author keywords

Assembling; Process Monitoring; Sensor Technology

Indexed keywords

ARTIFICIAL INTELLIGENCE; ASSEMBLY; FACTORY AUTOMATION; SENSOR DATA FUSION;

PROCESS MONITORING;

OPTICAL SENSORS;

EID: 0032318140     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0007-8506(07)63239-9     Document Type: Article

References (57)

1. Alshawish, H.M.M., Allen, C.R., 1994, 3D object recognition using coded light projection for robot assembly applications, 21st IEEE Industrial Electronics Conf., vol. 2, Los Alamitos: 1240-1247
2. Amirat, Y., Pontnau, J., Babaci, S., Francois, C., 1995, Flexible assembly cell integrating a parallel manipulator for accurate automatic assembly tasks, Int. IEEE/IAS Conf. on Ind. Autom. and Control: Emerging Technologies, Piscataway: 308-313
3. Arai, F., Fukuda, T., Iwata, H., Itoigawa, K., 1996, Integrated micro endeffector for dexterous micro-manipulation, 7th Int. Symp. on Micro Machine and Human Science, IEEE, Piscataway: 149-156
4. Arai, T., Kinoshita, N., 1981, The part mating forces that arise when using a worktable with compliance, Assembly Automation, August: 204-210
5. Arai, T., Osumi, H., Fukuoka, T., Moriyama, K., 1995, A Cooperative Assembly System Using Two Manipulators with Precise Positioning Devices, Annals of the CIRP, vol. 44/1: 23-26
6. Arnstroem, A., Groendahl, P., submitted by Sohlenius, G., 1985, A System for Automatic Assembly of Different Products, Annals of the CIRP, vol. 34/1:17-20
7. Asada, H., 1990 Teaching and Learning of Compliance using Neural Nets. Representation and Gneration of Non-linear Compliances, IEEE Int. Conf. on Robotics and Autom., Vol.2: 1237-1244.
8. Asano, T., Maeda, S., Murai, T., 1983, Vision System Aligns Leads for Automatic Component Insertion, Assembly Automation, February: 32-35
9. Asjes, R.J., Kooijman, K.S., Vermeulen, O.T., Duijve, R., 1996, Sensor and control electronics for an industrial 3D scanner, Proceedings of the Society of Photo-Optical Instrumentation Engineers, vol. 2599, SPIE, Bellingham, WA, USA: 171-176
10. Baird, S., Lurie, M., Precise Robotic Assembly Using Vision in the Hand, Robot Sensors: 85-94
11. Bauer, G.M., Screwing techniques and devices, Robert Bosch GmbH.
12. Bergquist, C., Söderquist, B.A.T., 1994, On combining accelerometers, force/torque sensors, and electrical sensing for detecting contact errors during assembly, IEEE/RSJ/GI Int. Conf. on Intelligent Robot Systems, Piscataway, NJ, USA, vol. 3: 1736-1743
13. Bley, H., Avgoustinov, N., Seel, U., Featurebasierte Montage - Konzepte und Realizierungsbeispiele fur den Datenaustausch in komplexen automatizierten Montagesystemen , VDI Berichte 1322; 161-178
14. Bley, H., Seel, U, Guenther, K.G., 1996, Solving technical problems in assembly system's design, Annals of the CIRP, Vol.45/1, 11-15.
15. Boothroyd, G., Dewhurst, P., 1982, Parts Presentation and Feeding for Robot Assembly, Annals of the CIRP, vol. 31/1: 377-381
16. Borovac, B., Seslija, D., Stankovski, S., 1992, Soft sensored gripper in assembly process, IEEE Int. Conf. on Robotics and Automation, vol. 2, Los Alamitos: 1283-1288
17. Braunschweiler, A., Llosas, P., Bertholds, A., Baur, C., 1995, Optical position sensor for automatic microassembling operations, Optical Engineering, vol. 34, n. 9, September: 2660-2664
18. Brooks, T., Cunningham, R., 1982, Adaptive Robot and Sensory System for Attachment of Electrical Connectors to Solar Arrays, Applied Machine Vision Conference, SME, Dearborn, Michigan, USA
19. Burel, G., Bernard, F., Venema, W.J., 1995, Vision feedback for SMD placement using neural networks, IEEE Int. Conf. on Robotics and Automation, vol. 2, Piscataway: 1491-1496
20. Caicedo, E.F., Martin, J.M., Calderon, L., Freire, T., Cees, R., 1994, Sensorial system for parts identification and robotic assembly, IEEE International Symposium on Industrial Electronics, IEEE, Piscataway, NJ, USA: 316-319
21. Cervera, E., del Pobil, A.P., 1995, Geometric reasoning for fine motion planning, IEEE Int. Symp. on Assembly and Task Planning: 154-159
22. Cervera, E., del Pobil, A.P., Marta, E. Sema, M.A., 1995, A Sensor-Based Approach for Motion in Contact in Task Planning, Proc. of IEEE Int. Conf. on Robots and Systems: 468-473.
23. Cervera, E., Del Pobil, A.P., Marta, E., Serna, M.A., 1996, Perception-based learning for motion in contact in task planning, Jou. of Intell. and Robotic Sys.: Theory & Applications, vol. 17/3, Nov.: 283-308
24. Chu, H., ElMaraghy, H.A., 1993, Integration of Task Planning and Motion Control in a Multi-Robot Assembly Workcell, Robotics & CIM, vol. 10/235-255
25. Connolly, T.H., Pfeiffer, F., 1993, Neural Network Hybrid Position/Force Control, Proc. of IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, Yokohama, Japan, July 26-30: 240-244.
26. Conway, P.P., Whalley, D.C., Wilkinson, M., Williams, D.J., 1997, Automated Adaptive Control of the Reflow Soldering of Electronic Assemblies
27. Cowan, D., Davies, D., 1986, Automatic system copes with variable PCB production
28. Cronshaw, A.J., Heginbotham, W.B., Pugh, A., A Practical Vision System for Use with Bowl Feeders, Robot Sensors
29. rd Aitem Conf., Salerno, Sept. 17-19, 259-266.
30. Dini, G., 1998, Application of Neural Networks in Robotized Peg-in-Hole Insertions Using a Pre-Process Learning Method, accepted for the publication on Int. Jou. for Manufacturing Science and Production, Freund Publishing.
31. Doemens, G., Rummel, P., Stockmann, M., 1995, A Novel Approach to 3D Vision for Automatic Component Placement, International Conference on Recent Advances in Mechatronics, vol. 1: 220-225
32. Domm, M., 1989, A better view of PCB assembly, Assembly Automation, November: 187-191
33. Drazan, P.J., Hopkins, S.H., submitted by Tilsey, R., 1984, Semi Autonomous Systems for Automatic Assembly, Annals of the CIRP, vol. 33/1: 291-294
34. Dreisbach, B., submitted by Guenther, K.G., 1985, Robot Aided Assembly in Massproduction with High Flexibility (Example: Assembly of Electrical Motors), Annals of the CIRP, vol. 34/1: 13-15
35. Driels, M.R., Collins, E.A., submitted by Boothroyd, D.G., 1985, Assembly of Non-Standard Electrical Components Using Stereoscopic Image Processing Techniques, Annals of the CIRP, vol. 34/1: 1-4
36. El-Maraghy, H.A., Syed, A., Chu, H., 1993, A 2-D Mapping Approach for Monitoring and Diagnosing the Execution of Robotic Assembly Tasks, Annals of the CIRP, vol. 42/1: 9-12
37. th ISIR Conf.
38. Feldmann, K., Steber, M., 1992, Screw Fastening in Flexible Automatic Assembly with Computer-Integrated Process Control, Annals of the CIRP
39. Feldmann, K., Schoenherr, U., Zeller, J., 1994, Fast Sensory Feedback for Demanding Robot Applications in New Technologies, 25th International Symposium on Industrial Robots, Hannover, Germany: 549-554
40. Feldmann, K., Schoenherr, U., Zeller, J., 1995, Fast Sensor Guided Robots for Flexible Manufacturing - Experimental Results, 26th International Symposium on Industrial Robots, Singapore: 241-246
41. Feldmann, K., Rottbauer, H. Roth, N., 1996, Relevance of assembly in global manufacturing, Vol.45/2, 545-552.
42. Feldmann, K., Goetz, K., Quality assurance in electronics production
43. Feldmann, K., Felbinger, C., Feuerstein, R., 1998, Analysis of different cause-effect mechanisms for quality assurance in electronics production, Production Engineering, Vol.V/1, 139-142.
44. Friedman, G.M., Derby, S.J., Versatile 3-D tactile array gripper using a digitally encoded sensor, Flexible Assembly Systems - 1992 ASME, Design Engineering Division (Publication) DE, vol. 48, ASME, New York, NY, USA: 111-117
45. Fujita, N., 1988, Assembly of Blocks by Autonomous Assembly Robot with Intelligence (ARI), Annals of the CIRP, vol. 37/1: 33-36
46. Grudzien, W., Sonntag, A., Seliger, G., 1997, Operating System for Laser Scanners, CAPE 97
47. Gullapalli, V., Grupen, R.A., Barto, A.G., 1992, Learning Reactive Admittance Control, Proc. of IEEE Int. Conf. on Robotics and Automation, Nice, France, May: 1475-1480.
48. Gurocak, H.B., de Sam Lazaro, A., 1995, Fuzzy logic and position sensing for precision assembly, Journal of Robotic Systems, vol. 12, n. 2, February: 135-146
49. Gurocak, H.B., 1996, Fuzzy rule base optimization of a compliant wrist sensor for robotic assembly, Journal of Robotic Systems, vol. 13/7, July: 475-487
50. Hanafusa, H., Asada, H., A robot hand with elastic fingers and its application to assembly process, IFAC Symp. on manufacturing tech., Tokyo, 1977.
51. th CIRP int. Sem. on Manufacturing Systems, Osaka, Japan.
52. Hara, K., Yokogawa, R., 1992, Precision insertion by heuristic search with fuzzy pattern matching, JSME Int. Jou. Series 3: Vibration, Control Engineering, Engineering for Industry, vol. 35, n. 2, June: 201-206
53. Heginbotham, W.B., 1982, Flexible assembly module with vision-controlled robot, Assembly Automation, February: 36-39
54. Hirai, S., Noguchi, H., Iwata, K., 1996, Human-demonstration based approach to the recognition of process state transitions in insertion of deformable tubes, 13th IEEE Int. Conference on Robotics and Automation, vol.3, IEEE, Piscataway: 2006-2011
55. Hoehn, M., 1996, Mikropositionerinnichtung fur die Prazisionsmontage, In. Reinhart, G. (ed): Mikrotechnik fur die Produktion, Munchen,pp.93-103, IWB. Seminarberichte 22, Verlag
56. Hollingum, J., 1989, Consortium aims for multi-product assembly, Assembly Autom., Aug. 137-141
57. Honda, T., Kanedo, S., Takeyama, H., 1985, Pattern Recognition of Part and/or Workpiece for Automatic Setting in Production Processings, Annals of the CIRP, vol. 34/1:29-32