Thin tribological coatings: Magic or design?

Surface and Coatings Technology

Volumn 94-95, Issue , 1997, Pages 476-482

  Meneve, J ^a   Vercammen, K ^a   Dekempeneer, E ^a   Smeets, J ^a  

^a FLEMISH INSTITUTE FOR TECHNOLOGICAL RESEARCH VITO   (Belgium)

Author keywords

Coating testing techniques; Generic methodology; Tribological coatings

Indexed keywords

CORROSION RESISTANCE; ELECTRIC PROPERTIES; FRICTION; HARDNESS; MATERIALS TESTING; STRENGTH OF MATERIALS; SUBSTRATES; THERMODYNAMIC PROPERTIES; TOUGHNESS; TRIBOLOGY;

THIN SURFACE COATINGS; TRIBOLOGICAL COATINGS;

PROTECTIVE COATINGS;

EID: 0031249730     PISSN: 02578972     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0257-8972(97)00430-1     Document Type: Article

References (57)

1. K. Holmberg and A. Matthews, Coatings Tribology, Vol. 28, Elsevier Tribology Series, 1st edn., Amsterdam, 1994, p. 125.
2. ASM Handbook, Friction, Lubrication and Wear Technology, Vol. 18, 1st edn., ASM International, Ohio, 1992, p. 827.
3. J.P. Dan, H.J. Boving and H.E. Hintermann, J. de Physique IV, 3 (1993) 933.
4. J.E. Seal, in J.E. Field (ed.), The Properties of Natural and Synthetic Diamond, Academic Press, London, 1992, p. 607.
5. S. Watanabe, S. Miyake and M. Murakawa, Tribological Performance of Cubic BN Films, accepted for publication in Diam. Films Technol. - special issue on c-BN films and related materials, 7 (2/3) (1997).
6. H. Ehrhardt, Surf. Coat. Technol., 74/75 (1995) 29.
7. A. Grill, Wear, 168 (1993) 143.
8. J. Meneve, E. Dekempeneer and J. Smeets, Diam. Films Technol., 4 (1994) 23.
9. W.D. Sproul, Surf. Coat. Technol., 86/87 (1996) 170.
10. J. Meneve, E. Dekempeneer, W. Wegener and J. Smeets, Surf. Coat. Technol., 86/87 (1996) 617.
11. H. Kupfer, F. Richter, S. Friedrich and H.-J. Spies, Surf. Coat. Technol., 74/75 (1995) 333.
12. J. Robertson, Prog. Solid. St. Chem., 21 (1991) 199.
13. A.R. McCabe, A.M. Jones and S.J. Bull, Diam. Rel. Mater., 3 (1994) 205.
14. J. D'Haen, C. Quaeyhaegens, L.M. Stals and M. Van Stappen, Surf. Coat. Technol., 61 (1993) 194.
15. A. Wilson and A. Matthews, J. Housden, R. Turner and B. Garside, Surf. Coat. Technol., 62 (1993) 600.
16. D.P. Monaghan, D.G. Teer and P.A. Logan, I. Efeoglu and R.D. Arnell, Surf. Coat. Technol., 60 (1993) 525.
17. M.F. Doerner and W.D. Nix, CRC Crit. Rev. Solid State Mater. Sci., 14 (1988) 225.
18. C. Subramanian, K.N. Stafford, T.P. Wilks, L.P. Ward and W. McMillan, Surf. Coat. Technol., 62 (1993) 529.
19. D. Gillibrand, M. Sarwar and C.T. Pierce, Surf. Coat. Technol., 86/87 (1996) 809.
20. E. Bergmann, J. Vogel and L. Simmen, Thin Solid Films, 153 (1987) 219.
21. R.R. Aharonov, S. Dutta and R.P. Fontana, Surf. Coat. Technol., 68/ 69 (1994) 755.
22. A.S. Korhonen, Vacuum, 45 (1994) 1031.
23. D. Drees, J.P. Celis, E. Dekempeneer and J. Meneve, Surf. Coat. Technol., 86/87 (1996) 575.
24. E.H.A. Dekempeneer, J. Smeets, J. Meneve, L. Eersels and R. Jacobs, Diam. Rel. Mater., 3 (1994) 613.
25. G. Berg, C. Friedrich, E. Broszeit and C. Berger, Properties of Sputtered Hard Coatings Depending on Macro and Micro Geometry of the Substrates, Proceedings of the 5th International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, September 9-13, 1996, accepted for publication in Surf. Coat. Technol.
26. P. Hedenqvist, S. Jacobson and S. Hogmark, Tribological PVD Coatings - Characterisation of Mechanical Properties, Proceedings of the 5th International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, September 9-13, 1996, accepted for publication in Surf. Coat. Technol..
27. E.H.A. Dekempeneer, L. Eersels, J, Smeets, J. Meneve and R. Jacobs, B. Blanpain and J.R. Roos, Diam. Rel. Mater., 2 (1993) 272.
28. J.P. Boeuf, J. Appl. Phys., 63 (1988) 3142.
29. H.A. Jehn, B. Rother and H. Kappl, Vacuum, 45 (1994) 1019.
30. H. Jehn, G. Reiners, N. Siegel, Charakterisierung dünner Schichten, 1st edn., DIN-Fachbericht 39, Beuth Verlag, Berlin, 1993, p. 7.
31. T. Gries and B. Wulfhorst, Surf. Coat. Technol., 68/69 (1994) 500.
32. R. Thom, L. Moore, W.D. Sproul and T.P. Chang, Surf. Coat. Technol., 62 (1993) 423.
33. M.D. Bentzon, K. Mogensen, J.B. Hansen, C.B. Hansen, C. Træholt, P. Holiday and S.S. Eskildsen, Surf. Coat. Technol., 68/69 (1994) 651.
34. J. Palmers, M. Van Stappen, J, D'Haen, M. D'Olieslaeger, L.M. Stals, G. Uhlig, M. Foller and E. Haberling, Surf. Coat. Technol., 74/75 (1995) 162.
35. P.A. Steinmann and H.E. Hintermann, J. Vac. Sci. Technol., A7 (1989) 2267.
36. H.R. Vetters, A. Schultz, P. Mayr and S.R.J. Saunders, Surf. Coat. Technol., 86/87 (1996) 345.
37. ENV 1071-3:1994 E: Determination of Adhesion by a Scratch Test, CEN Central Secretariat, Stassartstraat 36, B-1000 Brussel, Belgium.
38. M.D. Bentzon, C.B. Hansen and J.B. Hansen, Diam. Rel. Mater., 4 (1995) 787.
39. D. Müller, Y.R. Cho and E. Fromm, Surf. Coat. Technol., 74/75 (1995) 849.
40. D. Müller, Y.R. Cho, S. Berg and E. Fromm, in K.L. Mittal (ed.), Adhesion Measurement of Films and Coatings, 1st edn., VSP, Utrecht, 1995, p. 87.
41. U. Wiklund, P. Hedenqvist and S. Hogmark, Multilayer Cracking Resistance in Bending, Proceedings of the 5th International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, September 9-13, 1996, accepted for publication in Surf. Coat. Technol.
42. H. Oettel, T. Bertram, V. Weihnacht, R. Wiedemann and S.v. Zitzewitz, Mechanical Behaviour of TiN Coatings, Proceedings of the 5th International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, September 9-13, 1996, accepted for publication in Surf. Coat. Technol.
43. J.L. Loubet, J. M. Georges and G. Meille, in P.J. Blau and B.R. Lawn (eds.), Microindentation Techniques in Materials Science and Engineering, ASTM STP 889, ASTM, Philadelphia, 1985, p. 72.
44. M.F. Doerner and W.D. Nix, J. Mater. Res., 1 (1986) 601.
45. W.C. Oliver and G.M. Pharr, J. Mater. Res., 7 (1992) 1564.
46. S.P. Baker, in P.H. Townsend, T.P. Weihs, J.E. Sanchez Jr. and P. Børgesen (eds.), Thin Films: Stresses and Mechanical Properties IV, Mat. Res. Soc. Symp. Proc. Vol. 308, MRS, Pittsburgh, 1993, 209.
47. T.F. Page and S.V. Hainsworth, Surf. Coat. Technol., 61 (1993) 201.
48. J. Mencít and M.V. Swain, J. Mater. Res., 10 (1995) 1491.
49. J.L. Meneve, J.F. Smith, N.M. Jennett and S.R.J. Saunders, Appl. Surf. Sci., 100/101 (1996) 64.
50. ASM Handbook, Surface Engineering, Vol. 5, 1st edn., ASM International, Ohio, 1994, p. 647.
51. C.-C. Chiu, Mater. Sci. Eng., A150 (1992) 139.
52. B. Blanpain, H. Mohrbacher, J.P. Celis and J.R. Roos, Diam. Films Technol., 3 (1994) 177.
53. T.W. Wu, C.K. Lee and R.H. Wang, in P.H. Townsend, T.P. Weihs, J.E. Sanchez Jr. and P. Børgesen (eds.), Thin Films: Stresses and Mechanical Properties IV, Mat. Res. Soc. Symp. Proc. Vol. 308, MRS, Pittsburgh, 1993, p. 133.
54. K.L. Rutherford and I.M. Hutchings, Surf. Coat. Technol., 79 (1996) 231.
55. P.H. Shipway and I.M. Hutchings, Surf. Coat. Technol., 71 (1995) 1.
56. K. Holmberg and A. Matthews, Coatings Tribology, Vol. 28, 1st edn., Elsevier Tribology Series, Amsterdam, 1994, p. 325.
57. N. Schwarzer and F. Richter, Surf. Coat. Technol., 74/75 (1995) 97.