Bouncing from one collision to the next

Applied Mechanics Reviews

Volumn 52, Issue 8, 1999, Pages R27-R43

  Goldsmith, Werner ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0002228882     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3098938     Document Type: Article

References (249)

1. Abou-Sayed AS and Clifton RJ (1977) Pressure-shear-waves in 6061-T6 aluminum, J Appl Mech 44 85-8.
2. Acharya DP and Sengupta PR (1979) Two-dimensional wave propagation in a micropolar thermo-elastic layer with stretch, Int J Eng Sci 17 1109-1116.
3. Achenbach JD (1973), Wave Propagation in Elastic Solids, North-Holland, Amsterdam.
4. Alder JF and Phillips VF (1955) The effect of strain rate and temperature on the resistance of aluminum, copper and steel to compression, J Inst Metals 83 80.
5. Allen WA, Mayfield EB, and Morrison HL (1957) Dynamics of a projectile penetrating sand, J Appl Phys 28 370, 1331.
6. Alobaid YF (1995) Shot peening mechanics - experimental and theoretical analysis, Mech Mat 19 251-260.
7. American Society for Testing Materials (1938-1955) Proc Symp on Impact Testing 21 Special Tech Publ (1956).
8. American Society of Mechanical Engineers, AMD (1986) Crashworthiness and Occupant Protection in Transportation Systems, ASME, New York.
9. Andrews KC, Shiller M, Wright S and Klarbring A (1997) A dynamic thermoviscoelastic contact problem with friction and wear, Int J Eng Sci 35 1291-1309.
10. Arnold RN (1937) Impact stresses in a freely supported beam, Proc Inst Mech Eng, London, 137, 217
11. Backaitis SH (ed) (1989) Reconstruction of Motor Vehicle Accidents: A Technical Compendium, Soc Automotive Engrs, Warrendale PA.
12. Backaitis SH ed (1990) Accident Reconstruction Technologies: Pedestrians and Motorcycles in Automotive Collisions, Soc Automotive Eng, Warrendale PA
13. Backaitis SH and Mertz HJ (1994) Hybrid III: The First Human-Like Test Dummy. Warrendale PA, Soc Automotive Engrs.
14. Backman M and Goldsmith W (1978) The mechanics of penetration of projectiles into targets, Int J Eng Sci 16 1-99.
15. Banaugh RP and Goldsmith W (1963) Diffraction of elastic waves by surfaces of arbitrary shape, J Appl Mech 31 589-597.
16. Barnhart K and Goldmith W (1957) Stresses in beams during transverse impact, J Appl Mech 24 440-446.
17. Bashurov VV et al (1997) Experimental modelling and numerical simulation of high- and hypervelocity space debris impact to spacecraft shield protection, Int J Impact Eng 20 69-78.
18. Bell JF (1959) Propagation of plastic waves in solids, J Appl Phys 30 196-201.
19. Benson DJ et al (1986) The application of DYNA-3D in large-scale crashworthiness calculations. Lawrence Livermore Natl Labs, UCRL-94028 Preprint.
20. Berger SA Goldsmith W, and Lewis ER (1996) Introduction to Bioengineering. Oxford Univ Press, Oxford.
21. Bernoulli D (1751) De vibrationibus et sono laminarum elasticum, Com-mentiationis Physico-Geometricae, Commentarii Scientiarum Imperialis Petropolitanae 13 105.
22. Bernoulli J (1683) Jacob Bernoulli dissertatio de gravitate atheris. Amstel-dami, Apud Henr Wetstenicum.
23. Biba NV, Keife H, and Stahlberg U (1993) A finite-element simulation of powder compaction confirmed by model material experiments, J Mat Proc Tech 36 141-155.
24. Birkhoff G, MacDougall D, Pugh E, and Taylor G (1948) Explosives with lined cavities, J Appl Phys 19 563-582.
25. Bishop RF, Hill R, and Mott NF (1945) Theory of indentation and hardness testing, Proc Phys Soc 57 147.
26. Bock WK (1962) Charpy tests for steel, Modern Castings 42 64-8.
27. Bond FC (1946) Crushing tests by pressure and impact, Am Inst Min Metall Engrs, Mining Technology, Tech Publ No 1895
28. Borja RI (1988) Dynamics of pile driving by the finite element method, Comput Geotech 5 39-49.
29. Borodich FM (1993) The Hertz frictional contact between nonlinear elastic anisotropic bodies (The similarity approach), Int J Solids Struc 30 1513-1526.
30. Botros KK and Groves TK (1980) Fundamental impact welding parameters-An experimental investigation using a 76-mm powder cannon, J Appl Phys 51 3706- 3714.
31. Boussinesq J (1885) Application des potentials à l'étude de l'équilibre et du mouvements des corps élastiques, Gauthier-Villars, Paris.
32. Briggs LJ (1945) Methods for measuring the coefficient of restitution and spin of ball, J Res Nat Bur Stand 34 1.
33. Broberg KB (1956) Shock waves in elastic and elastic-plastic media, Avhandling Kungl Tekn Hogsk, Stockholm.
34. Burchard JE (1948) Rockets, Guns and Targets; rockets, target information, erosion information and hypervelocity guns developed during World War II by the Office of Scientific Research and Development, Little, Brown, Boston.
35. Campbell D (1953) An investigation of the plastic behavior of metal rods subjected to longitudinal impact, J Mech Phys Solids 1113.
36. Campbell D and Maiden CJ (1957) The effect of impact loading on the static yield strength of a medium carbon steel, J Mech Phys Solids 6 53.
37. Chadwick P (1979) Basic properties of plane harmonic waves in a prestressed heat-conducting elastic material, J Thermal Stresses 2 193-214.
38. Chadwick P (1989) Wave propagation in incompressible transversely isotropic media. I. Homogeneous plane waves; II Surface Waves, Proc R SocLondA 422 23-66,67-100.
39. Chandler RF (1995) Aircraft Crashworthiness, Soc of Automotive Eng, Warrendale, PA
40. Charters AC (1987) Development of the high-velocity gas dynamics gun, Int. J Impact Eng 5 181-203
41. Charters AC (1995) The early years of aerodynamic ranges, light gas guns and high-velocity impact, Int J Impact Eng 17 151-182.
42. Chellis RD (1942) Pile Driving Handbook, Stone & Webster Eng Corp, New York.
43. Chemg JG and Peng SL (1994) Transient multiple impulsive signal analysis for pneumatic percussive rivet tools, Mech Syst Sign Proc 8, 31-44.
44. Chou PC, Hashemia J, Chou A, and Rogers HC (1991) Experimentation and finite element simulation of adiabatic shear bands in controlled penetration impact, Int J Impact Eng 11 305-321.
45. Chree C (1889) The equations of an isotropic elastic solid in polar and cylindrical coordinates, their solutions and applications, Trans Camb Phil Soc 14 250.
46. Christensen RM (1982) Theory of Viscoelasticity: An Introduction, 2d Edition, Academic Press, New York.
47. Clark DS and Wood DS (1949) The time delay for the initiation of plastic deformation at rapidly applied constant stress, ProcASTM 49 717.
48. Clark DS and Wood DS (1950) The tensile impact properties of some metals and alloys, Trans Am Soc Metals 42 45.
49. Clifton RJ (1970) Analysis of the laser velocity interferometer, J Appl Phys 41 5335-5337.
50. Clifton RJ (1983) Dynamic plasticity, J Appl Mech 47 941-952.
51. Comninou M and Barber JR (1984) The thermoelastic Hertz problem with pressure- dependent contact resistance, Int J Mech Sci 26 549-574.
52. Comninou M Dundurs J and Barber JR (1981) Planar Hertz contact with heat conduction, J Appl Mech 48 549-554.
53. Cook MA (1959) Mechanisms of cratering in high-velocity impact, J Appl Phys 20 725.
54. Cook MA (1958) The Science of High Explosives, Am Chem Soc Mon Ser, Reinhold, New York.
55. Corbett GG, Reid SR and Johnson W (1996) Impact loading of plates and shells by free-flying projectiles: a review, Int J Impact Eng 16 141-230.
56. Cour-Palais BG (1987) Hypervelocity impact in metals, glass and composites, Int J Impact Eng 5 211-237.
57. Cristescu N (1967) Dynamic Plasticity, North-Holland, Amsterdam.
58. Crook AW (1952) A study of some impacts between metal bodies by a pi zoelectric method, Proc R Soc Land, A 212 377.
59. Cummings AE (1940) Dynamic pile driving formulas, Boston Soc Civil Et.J 27 6-27.
60. Davidenkoff NN (1934) Allowable working stresses under impact, Trans ASME 56 97.
61. Davies GOA ed (1984) Proc Int Conf on Structural Impact and Crashworthiness, Elsevier Sci Publ, London, New York.
62. Davies RM (1948) A critical study of the Hopkinson pressure bar, Phil Trans Roy Soc Lond, A, 240 375.
63. Davies RM (1949) The determination of the static and dynamic yield stresses using a steel ball, Proc Roy Soc Lond, A, 197 416.
64. Davies RM (1953) Stress waves in solids, Appl Mech Rev 6 1.
65. Deeks AJ and Randolph MF (1993) Analytical modelling of hammer impact for pile driving, Int J Numer Anal Meth Geomech 17 279-302.
66. Deng Y-C and Goldsmith W (1987) Response of a human head/neck/upper torso replica to dynamic loading. I: Physical model, II: Analytical/numerical model, J Biomech 20 471-486, 487-497.
67. Dennen RS (1969) Shock-tube driven impact experiments on solids, J Appl Phys 40 3326-3333.
68. Donnell LH (1930) Longitudinal wave transmission and impact, Trans ASME 52 153.
69. Duwez PE and Clark DS (1947) An experimental study of propagation oí plastic deformation under conditions of longitudinal impact, ProcASTM 47 502.
70. Duwez PE, Clark DS, and Bohnenblust HF (1950) The behavior of long beams under impact loading, J Appl Mech 17 27.
71. Dykins SE and Epps JA (1987) Portland cement concrete pavement pulverizing equipment, Trans Res Rec n 1126. Washington DC, ISA, 136-144.
72. Eichelberger RJ and Pugh EM (1952) Experimental verification of the theory of jet formation by charges with lined conical cavities, J Appl Rhys 23 537.
73. Enquist B and Kliegsman GA eds (1997) Computational Wave Propagation, Springer, New York.
74. Euler L (1736) Mechamca sive motus scientia analytice exposita/instar supplementi ad commentar. Acad Scient Imper Petroploii, Ex typographia Acad Scientiarum.
75. Euler L (1765) Theoria motus corporum solidorum seu rigidorum. Rosto-chii, Gryphiswaldiae: AF Ross.
76. Euler L (1911) Grundsätze der Artillerie. Reprinted as Euler's Opera Omina, G Teubner, Berlin.
77. Fair H (1987) Hypervelocity then and now, Int J Impact Eng 8 1-11.
78. Forney LJ (1974) On the duration for contact of the Hertzian impact of a spherical indenter on a Maxwell solid, Int J Solids Struct 10 621-624.
79. Fox En (1932) Stress phenomena occurring in pile driving, Engng (Lond) 134 263-265.
80. Galilei G (1638) Discorsi e dimestrazioni metematiche: in torno a due nuove scienze attend alia mecánica i movimenti locale. Aprlesso gli El-sevirii, Leide.
81. Ghaleb AF and Ayad NM (1998) Nonlinear waves in thermo-magneto-elasticity. I. Basic equations; II. Wave generation in a perfect electric conductor, Int J Appl Electromag Mech 9 339-357, 359-379.
82. Gilchrist A and Mills NJ (1994) Modelling of the impact response of motorcycle helmets, Int J Impact Eng 15201-218.
83. Goldsmith W and Cunningham DM (1956) Kinetics of oblique impact of a sphere on a beam, J Appl Mech 23 612-616.
84. Goldsmith W (1957) An elongating string under the action of a transverse foree, J Appl Mech 24 609-616.
85. Goldsmith W (1960) Impact: The theory and physical behavior of colliding solids, E Arnold, London.
86. Goldsmith W and Lyman PT Jr. (1960) The penetration of hard-steel spheres into plane metal surfaces, J Appl Mech 27 717-725.
87. Goldsmith W (1962) Dynamic Photoelasticity. In: Experimental Techniques in Shock and Vibrations. New York, ASME 25-54. See also Kurzzeitphysik (K Vollrath and G Thomer, eds 1967), Springer-Verlag, Wien, 579-619.
88. Goldsmith W (1963) Impact: The collision of solids, Appl Mech Rev 16 855-866.
89. Goldsmith W (1966) The physical processes producing head injuries. In: Head Injury CohfProc, J Lippincott, Philadelphia, 350-382.
90. Goldsmith W (1973) Biomechanics of head injury. In: Biomechanics: Its Foundations and Objectives, YC Fung, N Perrone, M Anliker (eds), Prentice-Hall, New York, 585-634.
91. Goldsmith W and Sackman JL (1973) Dynamic processes in rocks. In: Rock Mechanics Symposium, AMD 3, ASME, New York, 73-127.
92. Goldsmith W and Katsamanis F (1979) Fracture of notched and perforated plastic specimen produced by longitudinal impact, Int J Mech Sei 21 85-108.
93. Goldsmith W and Kabo JM (1982) Performance of baseball caps, Am J Sports Med 10 325-333.
94. Goldsmith W and Ommaya AK (1984) Head and neck injury criteria and tolerance levels. In: Proc Int School on Impact Trauma, Int Center of Transp Studies. Amsterdam, American Elsevier, 149-184.
95. Goldsmith W (1989) Meaningful concepts of head injury. In: Proc IRCOBI Conf (Stockholm), 1-11.
96. Goldsmith W et al (1997) Perforation of cellular sandwich plates, Int J Impact Eng 19 361-379.
97. Goldsmith W (1999) Nonideal projectile impact on targets, Int J Impact Eng 22(2) and (3) 95-395.
98. Graham G AC (1972) A contribution to Hertz's theory of elastic impact, Int J Eng Sei 11 409-413.
99. Graff, KF (1975) Wave Motion in Elastic Solids. Clarendon Press, Oxford.
100. Gurdjian ES, Lissner HR, and Patrick LM (1962) Protection of the head and neck in sports, J Am Med Assoc 182 509.
101. Hashin Z (1996) Finite thermoelastic fracture criterion with application to laminate cracking analysis, J Mech Phys Solids 44 1129-1145.
102. Hata S and Tateyama K (1991) Theoretical approach to impact solid compaction through plastic wave propagation, J Terramech 28 349-358.
103. Hélié F (1884) Traité de balistique experimentale, Dumaine, Paris.
104. Hertz H (1881) Über die Berührung fester elastischer Körper, J fur reine und angewandte Mathematik (Grelle) 92 153.
105. Hijden v d (1987) Propagation of Elastic Waves in Stratified Anisotropie Media. Amsterdam, New York, North-Holland.
106. Hill R (1950) The Mathematical Theory of Plasticity, Clarendon Press, Oxford.
107. Hopkinson B (1914) A method of measuring the pressures produced in the detonation of high explosives or by the impact of bullets, Phil Trans Roy Soc Lond, A 213 437.
108. Horàk Z (1937) Détermination experimentale du coefficient apparent de restitution tangentielle, Jednota Ceskosl Mat Fys 66 131.
109. Horger GJ (1945) Mechanical and metallurgical advantages of shot peening, Iron Age 155 40-49, 66-76,100, 146-149.
110. Horvay G and Voluswami A (1980) Hertzian impact of two elastic spheres in the presence of damping, Acta Mech 35 285-289.
111. Hsu TR and Bartels AWM (1976) Application of elasto-plastic finite element analysis in the contact problem of two solids, AIAAJ 14 121-122.
112. Hughes TJR et al (1976) A finite element method for a class of contact-impact problems, Computer Meth Appl Mech Eng 8 249-276.
113. Hugoniot H (1889) Sur la propagation du mouvement dans les corps et spécialement dans les gaz parfaits, J école polytech 58 1.
114. Hustrulid WA and Fairhurst C (1971) A theoretical and experimental study of percussive drilling of rock, Int J Rock Mech Min Sei & Geomech Abstr 8 311-333, 355-356; 9 417-429, 431-449.
115. Huth JH, Thompson JS and van Valkenberg ME (1957) Some new data on high-speed impact phenomena, (Trans ASME 79) J Appl Mech 24 65-68.
116. Johnson W (1972) Impact Strength of Materials, E Arnold, London.
117. Johnson W and Mamalis AG (1978) Crashworthiness of Vehicles: An Introduction to Aspects of Collision ofMotor Cars, Ships, Aircraft and Railway Coaches, Mech Eng Publ, London.
118. Jones N and Wierzbicki T (eds) (1983, 1993) Structural Crashworthiness, Butterworths, London, New York; Elsevier Sei Publ, London, New York.
119. Jung HY, Epstein JS, Deason VA, and Reuter WG (1991) Long wavelength impact of Izod fracture specimens: an experimental/numerical investigation, Exp Mech 31 281-287.
120. Kaliski S (1970) Mechanical model of the amplification of a transverse elastic surface wave, Bull de VAcadémie Polonaise des Sciences, Series des Sciences Techniques 18 455-457.
121. Kalker JJ (1972) On elastic line contact, J Appl Mech 39 1125-1132.
122. Kalker JJ and van Randen V (1972) A minimum principle for frictionless elastic contact with application to non-Hertzian half-space contact, J Eng Math 6 193-206.
123. Karman T v and Duwez PE (1950) On the propagation of plastic deformations in solids, J Appl Phys 21 987.
124. Kashkeev VM, Matsuk VI, and Kokhlov VA (1979) [The Hertz problem for contacting bodies under conditions of adhesional interaction]. Izvestia Akademia Nauk SSSR, Mekhanika Tverdogo Tela, n 3 182-184.
125. Katsamanis F and Goldsmith W (1982) Transverse impact on fluid-filled cylinders, J Appl Mech 104 661-675.
126. Kawata K and Shiori J, eds (1987) Proc IUTAM Symp on Macro- and Micro Mechanics of High Velocity Deformation and Fracture, Springer-Verlag, Berlin.
127. Kawata K and Shiori J, eds (1996) Proc IUTAM Symp on Constitutive Relations in High/Very High Strain Rates, Springer-Verlag, Tokyo.
128. Kenner VH and Goldsmith W (1968) Elastic waves in truncated cones, Exp Mech 8 442-449.
129. Kenner, VH and Goldsmith W (1969) One-dimensional wave propagation through a short discontinuity, J Acoust Soc Am 45 115-118.
130. Kerkhof F (1970) Bruchvorgänge in Gläsern. Deutsche Glastechniche Gesell, Frankfurt a/M.
131. Kobayashi AS ed (1978) Handbook on Experimental Stress Analysis, Soc Exp Stress Anal, Westport CT.
132. Kobayashi AS (ed) (1987) Handbook on Experimental Mechanics, Prentice-Hall, Englewood Cliffs NJ.
133. Kolsky H (1949) An investigation of the mechanical properties of materials at high rates of loading, Proc Phys Soc Lond II 62 676.
134. Kolsky H (1953) Stress Waves in Solids. Clarendon Press, Oxford.
135. Kolsky H (1956) The propagation of stress pulses in viscoelastic solids, Phil Mag, Ser 8,1693.
136. Krupp F (1885-1890) Über das Durchschlagen von Panzerplatten. Essen, Germany.
137. Krivobok VN (1943) The significance of impact properties of metals, Western Metals 1 10.
138. Kulikovskii AG (1995) Nonlinear Waves in Elastic Media, CRC Press, Boca Raton FL.
139. Lagarde A (ed) (1981) Proc IUTAM Symp on Optical Methods in Mechanics of Solids. Sijthoff and Noordhoff, Alphen aan den Rijn.
140. Langley M (1931) On solid rivets, Flight 23 478d-478h.
141. Lewis JL and Goldsmith W (1973) A biaxial split Hopkinson bar for simultaneous torsion and compression, Rev Sei Instr44 811-813.
142. Li K and Goldsmith W (1997) Perforation of steel and polycarbonate plates by tumbling projectiles, Int J Solids Struct 34 4581-4596.
143. Love AEH (1892) A Treatise on the Mathematical Theory of Elasticity, Univ Press, Cambridge (UK)
144. Lubliner J (1990) Plasticity Theory, Macmillan, New York.
145. Lundberg B (1985) Microcomputer simulation of percussive drilling, Int J RockMechMin Sei and GeomechAbst 19 237-249.
146. Mainardi F (ed) (1982) Wave Propagation in Viscoelastic Media, Pitman Advanced Pub Program, Boston.
147. Manjoine MJ (1944) The influence of rate of strain and temperature on yield stresses in mild steel, Trans ASME 66 A-211.
148. Manogg P (1966) Die Lichtablenkung durch eine elastische beanspruchte Platte auf die Schattenfiguren von Kreis- und Risskerbe, Glastechnische Berichte 39 323-329.
149. Marci M (1639) De Proportione Motus. Prague [See Mach E 1912 Die Mechanik und ihre Entwicklung, 7th ed 310. Leipzig, Brockhaus].
150. Masket AV (1949) The measurement of forces resisting armor penetration, J Appl Phys 20 132.
151. McCarthy MF (1968) Wave propagation in nonlinear thermoelasticity. On the variation of amplitude of acceleration waves, Proc Vibr Problems 9 367-382.
152. McCarthy MF and Hayes MA eds (1988) Proc 2ndIUTAM Symp on Elastic Wave Propagation. North-Holland, Amsterdam, New York.
153. McGregor CW and Fisher JC (1944) Relations between the notched beam impact test and the static tension test, Trans Am Soc Metals 66 A28.
154. Miklowitz J (1947) The initiation and propagation of the plastic zone in a tension bar of mild steel as influenced by the speed of stretching and rigidity of the testing machine, Trans ASME 69 A-21.
155. Miklowitz J (1978) The Theory of elastic Waves and Waveguides, North-Holland, Amsterdam.
156. Millard EH (1947) Half century of cold riveting, Fasteners 4 7-9.
157. Mindlin, RD (1945) Dynamics of package cushioning, Bell System Tech J 24 353-461.
158. Mindlin RD (1949) Compliance of elastic bodies in contact, J Appl Mech 16 259.
159. Munroe CE (1888) Modem explosives, Scribner’s Mag 111 563-576.
160. Nadai A (1931) Plasticity: A Mechanics of the Plastic State of Matter, McGraw-Hill, New York.
161. Nadaii A (1950) Theory of Flow and Fracture of Solids, McGraw- Hill, New York.
162. Naifeh WH (1995) Wave Propagation in anisotropic Media with Application to Composites, Elsevier, Amsterdam, New York.
163. Nath B (1990) A continuum method of pile driving analysis: comparison with the wave equation method, Comput Geotech 10 265-285.
164. Nesterenko VF, Meyers M A and Wright TW (1997) Self-organization in the initiation of adiabatic shear bands, Acta Mat 46 327-340.
165. Newton, I (1642) Philosophiana naturalis principia mathematica. S Pepys (1686), London.
166. Nowacki WK (1978) Stress Waves in Solids, translated by Z Olsiak. Pergamon, Oxford, New York.
167. Nishiwaki J (1951) Resistance to the penetration of a bullet through an aluminum plate, J Phys Soc Japan 4 374-379.
168. Ommaya AK, Hirsch AE, and Martinez J (1966) The role of whiplash in cerebral concussion, Proc JOth Stapp Car Crash Conf, SAE, New York, 197-202.
169. Ommaya AK et al (1967) Scaling of experimental data in subhuman primates to concussion threshold for man, Proc 11th Stapp Car Crash Conf, SAE, New York, 47-52.
170. Öpik E (1936) Researches on the physical theory of meteor phenomena: Part I. Theory of the formation of meteor craters, Acta Commentaris Univ Tartuensis 28 A30.
171. Orowan E, Nye JF, and Cairns WJ (1952) Strength and testing of materials. Part I, Selected Government Res Reports 6, HM Stationary Off, London, 127.
172. Osher J et al (1990) Hypervelocity acceleration and impact experiments with the LLNL electric guns, Int J Impact Eng 10 439-452.
173. Pack DC, Evans WM, and James HJ (1948) The propagation of shock waves in steel and lead, Proc Phys Soc Land 60 1948 1.
174. Pack DC and Evans WM (1951) Penetration by high-velocity (Munroe) jets I, Proc Phys Soc LondB 64 298.
175. Paik JK and Pedersen PT (1996) Modeling of the internal mechanics in ship collisions, Ocean Eng 23 107-142.
176. Pang SS and Goldsmith W (1992) A model of a pneumatic jackhammer system, Rock Mech Rock Eng 25 49-61.
177. Pang SS, Kumano A, Goldsmith W and Rask V (1986) Performance of a pickax, Rock Mech Rock Eng 19 27-52.
178. Papanicolaou G (1998) Wave Propagation in Complex Media, Springer, New York.
179. Payton RG (1983) Elastic Wave Propagation in Transversely Isotropic Media, M Nijhoff Publ, The Hague.
180. Pedersen PT, Valsgaard S, Olsen D, and Spangenberg S (1993) Ship impacts-Bow collisions, Int J Impact Eng 13 163-187.
181. Pelekh BL and Sysak RD (1972) A class of contact problems for thin anisotropic reinforced plastic plates Mekhanika Compozitnykh Materialov 8 346-350 (Polymer Mech 8 305-309).
182. Pilant, WL (1979) Elastic Waves in the Earth, Elsevier Sei Publ, Amsterdam, New York.
183. Pochhammer L (1876) Ober Forpflanzungsgeschwindigkeiten kleiner Schwingungen in einem unbegrenzten isotropen Kreiszylinder, J reine und angewandte Mathematik (Crelle) 81324
184. Poncelet JV (1844) Traité de mécanique industrielle, 2d ed, J Schiwel, Bruges.
185. Pöschl T (1926) Der Stoss. In: Handbuch der Physik, Ch 7, J Springer, Leipzig.
186. Prasad P (1984) An overview of major occupant simulation models. SAE Paper 840855. In: Mathematical Simulation of Occupant and Vehicle Kinematics. Government/Industry Meeting and Exposition, Washington DC, SAE, Warrendale, P- 146.
187. Puri P (1972) Plane waves in thermoelasticity and magnetothermoelasticity, IntJ Eng Sei 10 647-677.
188. Puri P (1973) Plane waves in generalized thermoelasticity, IntJ Eng Sei 11 735-744.
189. Rakhmatulin HA (1945) [On plastic waves of loading], PrikladMatMekh 9 91.
190. Rankine WJM (1870) On the thermodynamic theory of waves of longitudinal disturbance, Trans Roy SocLond 160 277.
191. Rashleigh SC and Marshall RA (1978) Electromagnetic acceleration of macroparticles to high velocity, J Appl Phys 49 2540-2542.
192. Rayleigh JWS (1906) On the production of vibrations by forces of relatively long duration, with applications to the theory of collisions Phil Mag, Ser 6 11 283.
193. Rayleigh JWS (1945) Theory of Sound, Dover, New York.
194. Reiners E (1960) Die Prallverkleinerung von spröden Stoffen bei sehr hohen Aufprallgeschwindigkeiten, Chemie-Ingenieur-Technik 32 136-142.
195. Ricker NH (1977) Transient Waves in Viscoelastic Media, North-Holland, Amsterdam.
196. Ricketts, TE and Goldsmith W (1970) Dynamic properties of rocks and composite structural materials, Int J Rock Mech Min Sei 7 315-335.
197. Robins B (1761) New Principles of Gunnery (Mathematical Tracts of the late Benjamin Robins), J Nourse, London.
198. Robinson JL (1975) The mechanics of wave formation in impact welding, Phil Mag 31 587-597.
199. Rosenberg Z, Cohen MA, and Levy P (1994) On the catastrophic failure of high-pressure vessels by projectile impact, Int J Impact Eng 15 827-831.
200. Rostoker N (1953) The formation of craters by high-speed particles, Mete-oritics 111.
201. Rumpf H (1973) Physical aspects of comminution and new formulation of a law of comminution, Powder Tech 7 145-159.
202. Sarig Y (1991) Impact loading associated with agricultural products-Review, Int J Impact Eng 11 251-275.
203. Saxl IJ (1935) Testing method for measuring relative force of individual blow of high-speed hammers and their frequency, J Franklin Inst 319 553-563.
204. Sayir MB and Koller MG (1986) Dynamic behavior of sandwich plates, Zeit angewMech Phys (ZAMP) 27 78-103.
205. Sayir MB, Häusler K and Parti M (1992) Impact behavior of corrugated sheets of fibre-reinforced cement, Composites 23 441-452
206. Sears JE (1908) On the longitudinal impact of metal rods with rounded ends, Trans Comb Phil Soc 21 49.
207. Singer J and Prucz J (1982) Influence of initial imperfections on vibrations of axially stiffened sandwich plates, J Sound Vib 80 117-143.
208. Singh KP and Paul B (1974) Numerical solution of non-Hertzian elastic contact problems, J Appl Mech 41 484-490.
209. Skalak R (1957) Longitudinal impact on a semi-infinite elastic circular bar, (Trans ASME 79) J Appl Mech 24 59-64.
210. Smith EAI (1960) Pile driving analysis by the wave equation, ASCE Proc 86 J Soil Mech and Found Div, 35-61.
211. Sobscyk K (1985) Stochastic Wave Propagation, Elsevier, Amsterdam, New York.
212. Society of Automotive Engineers (1986), Human Tolerance to Impact Conditions as related to Motor Vehicle Design, SAE, Warrendale PA, J885.
213. Society of Automotive Engineers (1990) Vehicle Crashworthiness and Occupant Protection in Frontal Collisions, Warrendale PA
214. Sokolnikoff, IS (1956) Mathematical Theory of Elasticity, 2nd Edition, McGraw-Hill, New York.
215. Solberg JM and Papadopoulos P (1998) A finite element method for contact/impact, FE Anal Des 30 297-311.
216. Southwell RV (1937) Notched bar impact testing, Met Ind Lond 51 457-460.
217. Southwell RV (1948) Relaxation Methods in Engineering Science/A Treatise on Approximate Computations, Oxford Univ Press, London.
218. Spence, DB (1975) The Hertz contact problem with finite friction, J Elast 5 297-319.
219. St Venant B de (1883) Résistance vive ou dynamique des solides. Representation graphique des lois du choc longitudinal, Comp Rend Acad Seien Paris 91 127, 214, 281, 444.
220. St Venant B de and Flamant (1889) Courbes représentative des lois du choc longitudinal et du choc transversal d'une barre prismatique, J Ecole Polytechnique, Paris 59 97.
221. Stronge W (1990) Rigid body collisions with friction, Proc Roy Soc Lond A 431 169-181.
222. Stronge W (1994) Planar collisions of rough compliant bodies, Int J Impact Eng IS 435-450.
223. Swift RP and Snell CM (1994) Source conditions for exploding wire stress wave impact experiments, Am Inst Phys ConfProc No 309, Pt 2, 1671-1674.
224. Tabor D (1951) The Hardness of Metal, Clarendon Press, Oxford.
225. Taylor GI (1946) The testing of materials at high rates of strain, J Inst Civil Eng 26 486.
226. Taylor GI (1948) The use of flat-ended projectiles for determining dynamic yield stress. I. Theoretical considerations, Proc Roy Soc Lond, A 194 289.
227. Taylor RL and Papadopoulos P (1993) On a finite element method for dynamic contact/impact problems, Int J Numer Methods Eng 36 2123-2140.
228. Teichman HC and Tadros RN (1991) Analytical and experimental simulation of fan blade behavior under bird impact, J Eng Gas Turb Power, ASME 113 582- 594.
229. Terusuma M and Kimura F (1994) Collision response for deformable models based on Hertz’s contact theory. J Visualization Comput Animation 5 209-224.
230. Tillet JPA (1954) A study of the impact of spheres on plates, Proc Phys Soc Lond, B 67 677.
231. Timoshenko SP (1913) Zur Frage der Wirkung eines Stosses auf einen Balken, Zeit Math Phys 62 198.
232. Timoshenko SP (1921) On the correction for shear of the differential equation for transverse vibrations of prismatic bars, Phil Mag, Ser 6 41 744.
233. Timoshenko SP (1922) On the transverse vibrations of bars of uniform cross section, Phil Mag, Ser 6 43 125.
234. Timoshenko SP and Goodier JN (1951) Theory of Elasticity, 2nd Edition. McGraw-Hill, New York.
235. Tower MM, Jackson GL, Farris LK, and Haight CH (1987) Hypervelocity impact testing using an electromagnetic railgun launcher, Int J Impact Eng 5 635-644.
236. Truesdell C ed (1984) Waves in Elastic and Viscoelastic Solids: Theory and Experiment. Springer-Verlag, Berlin, New York.
237. Turgutlu A, Al-Hassani TS, and Akyurt M (1995) Experimental investigation of deformation and jetting during impact spot welding, Int J Impact Eng 16 789-799.
238. Tuzi Z and Nisida M (1938) On the impact of beams, Sci Papers Inst Phys Chem Res Paper No 826, 34, 1053.
239. Vinh T and Khalil T (1984) Adiabatic and viscoplastic properties of some polymers at high strain and high strain rates. In: Proc 3rd Conf Mechanical Properties at high Strain Rates, J Harding (ed), IOP, Bristol (UK), 39-46.
240. Voigt W (1883) Die Theorie des longitudinalen Stosses zylindrischer Stabe, Ann Phys Chem (Poggendorf) Ser 6 19 44.
241. Whiffin AC (1948) The use of flat-ended projectiles for determining dynamic yield stress, II: Tests on various metallic materials, Proc Roy Soc Lond, A 194 300.
242. Wien W (1926) Handbuch der Experimentalphysik. Akademische Verlagsgesellschaft, Leipzig.
243. Wismans J, Maltha J, Melvin JW, and Stalnaker RL (1979) Child restraint evaluation by experimental and mathematical simulation. SAE Paper 791017, Proc 23rd Stapp Car Crash Conf
244. Yankelevsky DZ and Adin MA (1979) A simplified analytical method for solid penetration analysis, (Technion) Israel Inst Tech, Haifa.
245. Yee YH and Yang DY (1997) Finite element modelling of the high velocity impact forging press by explicit time integration method, J Mat Proc Tech 63 718-723
246. Young T, (1807) Treatise of Natural Philosophy. J Johnson, London.
247. Yuan W and Goldsmith W (1992a) Response of simulated propellant and explosives to projectile impact -II. Fragmentation, Int J Impact Eng 12 499-531.
248. Yuan W and Goldsmith W (1992b) Response of simulated propellant and explosives to projectile impact - III Experimental and numerical results of warhead penetration and fragmentation, Int J Impact Eng 12 533-558.
249. Zukas JA ed (1990) High Velocity Impact Dynamics, J Wiley, New York