Non-ideal projectile impact on targets

International Journal of Impact Engineering

Volumn 22, Issue 2, 1999, Pages 95-395

  Goldsmith, Werner ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

APPROXIMATION THEORY; ASPECT RATIO; BALLISTICS; COMPUTER SIMULATION; MATHEMATICAL MODELS; PARAMETER ESTIMATION; PROJECTILES;

IMPACT ENGINEERING; RICOCHET;

FRACTURE MECHANICS;

EID: 0033077398     PISSN: 0734743X     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0734-743X(98)00031-1     Document Type: Review

References (369)

1. [1] Euler L. Neue Grundsätze der Artillerie (reprinted as Euler's Opera Omina). Berlin: Teubner, 1922.
2. [2] Robins B. New principles of gunnery (Mathematical Tracts of the late Benjamin Robins), London: Nourse, 1761.
3. [3] Helié F. Traité de balistique éxperimentale, vol. 1 (avec la collaboration de M. Hugoniot) (1st ed. 1864) Paris: Gauthier-Villars, 1884.
4. [4] Backman M, Goldsmith W. The mechanics of penetration of projectiles into tragets. Int J Engng Sci 1978; 16:1-99.
5. [5] Eringen C, editor Penetration mechanics issue. Int J Engng Sci 1978: 16, (11).
6. [6] Corbett GG, Reid SR, Johnson W. Impact loading of plates and shells by free-flying projectiles: a review. Int J Impact Engng 1996; 18:141-230.
7. [7] Anderson Jr CW, Bodner SR. Ballistic impact: the status of analytical and numerical modeling. Int J Impact Engng 1988; 7:9-35.
8. [8] Zukas JA, editor. High velocity impact dynamics. New York: Wiley-Interscience, 1990.
9. [9] Zukas JA, editor. Introduction to penetration mechanics. In: High velocity impact dynamics. New York: Wiley-Interscience, 1990: 297-319.
10. [10] Recht RF. Ballistic impact dynamics, Parts I and II. Unpublished, 1986 (Prepared for the Handbook Division of the U.S. Army Research Office).
11. [11] Backman M. Terminal ballistics. NWC TP 5780, Naval Weapons Center, China Lake, CA, 1976.
12. [12] Sutterlin R. Les projectiles, Sec. I, II, III, IV, Sciences et techniques de l'armament, Memorial de 1;artillerie française 1966; 40:569-830 and 1967; 41 (12).
13. [13] Proc. 1st-7th Symposia on Hypervelocity Impact, 1955-1965.
14. [14] Int J Impact Engng, Proc Hypervelocity Impact Symposia, Vol. 5, 1987.
15. [15] Int J Impact Engng, Proc Hypervelocity Impact Symposia, Vol. 10, 1990.
16. [16] Int J Impact Engng, Proc Hypervelocity Impact Symposia, Vol. 14, 1994.
17. [17] Int J Impact Engng, Proc Hypervelocity Impact Symposia, Vol. 17, 1995.
18. [18] American Preparedness Society, Proc Int Symp Ballistics, 1974-1998: 1-17.
19. [19] Schwer LE, Salamon NJ, Liu WK, editors. Computational techniques for contact, impact, penetration and perforation of solids, AMD vol. 103. New York: ASME, 1989.
20. [20] Kinslow R. editor High velocity impact phenomena. New York: Academic Press, 1970.
21. [21] Gehring JW. Engineering considerations in hypervelocity impact. In Schwer LE, Salamon NJ, Liu WK, editors. Computational techniques for contact, impact, penetration and perforation of solids, AMD vol. 103. New York: ASME, 1989: 463-514.
22. [22] Goldsmith W, Cunningham DM. An experimental investigation of the oblique impact of spheres upon simply supported beams. Proc. SESA 1955; 14:171-81.
23. [23] Cunningham DM, Goldsmith W. An experimental investigation of beam stresses produced by oblique impact of a steel sphere. J Appl Mech 1956; 78:606-11.
24. [24] Goldsmith W, Cunningham DM. Kinematic phenomena observed during the oblique impact of a sphere on a beam. J Appl Mech 1956; 78:612-16.
25. [25] Kelly JM, Tseng W. Oblique impact on rigid-plastic beam support systems. Int J Nonlinear Mech 1970; 5:183-96.
26. [26] Sundararajan G, Shewmon PG. The oblique impact of a hard ball against ductile, semi-Infinite target materials - experiments and analysis. Int J Impact Engng 1987; 6:3-22.
27. [27] Sundararajan G. The energy absorbed during the oblique impact of a hard ball against ductile target materials, Int J Impact Engng 1990; 9:343-58.
28. [28] Shu D, Stronge WJ, Yu TX. Oblique impact at the tip of a cantilever. Int J Impact Engng 1992; 12:37-47.
29. [29] Tate A. Engineering modeling of some aspects of segmented rod penetration. Int J Impact Engng 1990; 9:327-41.
30. [30] Orphal DL, Miller CW. Penetration performance of nonideal segmented rods. Int J Impact Engng 1991; 11:457-61.
31. [31] Zhu G, Goldsmith W, Dharan CKH. Penetration of laminated Kevlar by projectiles. I. Experimental investigation. Int J Solids Struct 1992; 29:399-420.
32. [32] Yuan W, Goldsmith W, Radin J, Tauber Z. Response of simulated propellant and explosives to projectile impact. I. Material behavior and penetration studies, Int J Impact Engng 1992; 12:475-97.
33. [33] Wilkins ML. Calculation of elastic-plastic flow. In: Alder B et al, editors. Methods in computational physics, New York: Academic Press, 1964; 3:211-263.
34. [34] Hallquist JO, Benson DJ. DYNA-3D user's manual (Nonlinear dynamic analysis of structures in three dimensions), University of California Lawrence Livermore National Laboratory, Report UCID-19592, Rev. 2, 1986.
35. [35] Whirley RG, Hallquist JO. Dyna-3D - User Manual. University of California, Lawrence Livermore National Laboratory, December 1992.
36. [36] Anderson CE, Morris BL, Littlefield DL. A penetration mechanics database. SWRI Report 3593/001 (U.S. Department of Energy DE-AC04-90AL58770; U.S. Army Research Office DAAL03-91-C-0021) 31 January 1992.
37. [37] Backman ME, Finnegan SA. Dynamics of the oblique impact and ricochet of nondeforming spheres against thin plates. U.S. Naval Weapons Center, China Lake, CA NWC TP 5844, 1976.
38. [38] Backman ME, Finnegan SA, Whitham KG. Dynamics of the oblique impact of nondeforming projectiles into thin plates. In Sih GC, editor Proc 14th Ann Meeting Soc Engng Sci, Recent advances in engineering science. Lehigh University Publications, 1977; 9-20.
39. [39] Hutchings IM, The ricochet of spheres and cylinders from the surface of water. Int J Mech Sci 1976; 18:243-7.
40. [40] Johnson W, Reid SR. Ricochet of spheres off water. J Mech Engng Sci 1975; 17:71-81.
41. [41] Hutchings IM. Further studies of the oblique impact of a hard sphere against a ductile solid. Int J Mech Sci 1981; 23:639-46.
42. [42] Hetherington JG, Lemieux PF. The effect of obliquity on the ballistic performance of two component composite armours. Int J Impact Engng 1994; 15:131-7.
43. [43] Florence AL. Interaction of projectiles and composite armor, Part II. Stanford Research Institute, Menlo Park, CA. AMMRC-CR-69-15, 1969.
44. [44] Finnegan SA, Dimaranan LF, Heimdahl DER, Pringle JK. A study of obliquity effects on perforation and ricochet processes in thin plates impacted by compact fragments. Proc 14th Int Symp Ballistics, TB48, 1993:661-70.
45. [45] McGlaun JM, Thompson SL, Elrick MG. CTH User's Manual and Input Instructions. Report SAND88-0523, San Diego National Laboratories, Albuquerque, NM, April 1988.
46. [46] Wu E, Goldsmith W. Normal impact of blunt projectiles on moving targets: experimental study. Int J Impact Engng 1990; 9:389-404.
47. [47] Kivity Y, Mayseless M, Luttwak G, Stilp A, Hohler V, Weber K, Florie C, Lenselink H, Cowler M, Birnbaum N. High obliquity impact of soft and hard spheres on thin plates. Proc of the 15th Int Symp Ballistics, Vol 1 (TB 18) 1995:133-42.
48. [48] Maurer WC, Rinehart JS. Impact crater formation in rock, J Appl Phys 1960; 21:1247-52.
49. [49] Zook J, Slack W, Izdebski R. Ricochet and penetration of steel spheres penetrating aluminum targets. Aberdeen Proving Grounds, Ballistic Research Laboratories, Memorandum Report ARBI-MR-03243, 1983.
50. [50] Johnson W, Daneshi GH. The trajectory of a projectile when fired parallel and near to the free surface of a plastic solid. Int J Mech Sci 1978; 20:255-63.
51. [51] Tilly GP, Sage W. The interaction of particle and material behaviour in erosion processes. Wear 1970; 16:447-65.
52. [52] Tilly GP. A two-stage mechanism of ductile erosion. Wear 1973; 23:87-96.
53. [53] Akimune Y. Oblique impact of spherical particles onto silicon nitride. J Amer Ceramic Soc 1990; 73:3607-10.
54. [54] Sun T, Pei S. The study of oblique impact of a deformable projectile at ductile spaced layered targets. Proc 15th Int Symp Ballistics (TB49) 1995: 387-92.
55. [55] Poncelet JV. Traité de mécanique industrielle, 2d ed. Bruges: J. Schiwel, 1844.
56. [56] Zukas JA, editor Impact dynamics. New York: Wiley 1982.
57. [57] Baker JR, Persechino MA. An analytical model of hole size in finite plates for both normal and oblique hypervelocity impact for all target thicknesses up to the ballistic limit. Int J Impact Engng 1993; 14:73-84.
58. [58] Maiden CJ, Gehring JW, MacMillan AR. Final report of fundamental mechanism of damage to thin targets by hypervelocity projectiles. General Motors, Report GM/DRL TR 63-225, 1963.
59. [59] Fish RH, Summers JL. The effect of material properties on threshold penetration. NASA/ARC. NASA TM x-54, 046, 1965.
60. [60] Swift HF, Carson JM. Ballistic limits of 6061-T6 aluminum bumper systems. Air Force Materials Laboratory, Report AFML-TR-67-324, 1967.
61. [61] Warnica RL, Gehring JW. Hypervelocity impact experiments. General Motors Report GM/DRL TR 64-41, 1964.
62. [62] Hermann W, Wilbeck JS. Review of hypervelocity penetration theories, Int J Impact Engng 1987; 5:307-22.
63. [63] Hertel ES. A Comparison of the CTH shock physics code with experimental data. Sandia Report San-92-1899, 1992.
64. [64] Johnson GR, Cook WH. A constitutive model and data for metals subjected to large strains, high strain rates, and high temperatures. Proc Seventh Int Symp on Ballistics, The Hague, 1983:541-7.
65. [65] Johnson GR, Cook WH. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Engng Fract Mech 1985;21: 31-48.
66. [66] McGlaun JM, Thompson SL, Elrick MG. CTH: a three-dimensional shock wave physics code. Int J Impact Engng 1990; 10:351-60.
67. [67] Christiansen EL. Oblique impact data. NASA Internal Memorandum, SN#-92-177, 30 June 1992.
68. [68] Christiansen EL, Cykowski E, Ortega J. Highly oblique impact into thick and thin targets. Int J Impact Engng 1993; 14:157-69.
69. [69] Hayhurst CJ, Ranson HJ, Gardner DJ, Birnbaum NK. Modelling of microparticle hypervelocity oblique impacts on thick targets. Int J Impact Engng 1995; 17:375-86.
70. [70] Cour-Palais BG. Hypervelocity impact in metals, glass and composites. Int J Impact Engng 1987; 5:221-37.
71. [71] Stradling GI, Hyrozek OC, Shafer BP, Curling HL Jr, Collopy MT, Hopkins Blossom AA, Furstenau S. Ultra high velocity impacts: cratering studies of microscopic impacts from 3 km/s to 30 km/s. Int J Impact Engng 1993; 14:719-27.
72. [72] Watts A, Atkinson D, Ricco S. Dimensional scaling for impact cratering and perforation. POD Associates Report, March 1993.
73. [73] Schonberg WP, Taylor RA. Penetration and ricochet phenomena in oblique hypervelocity impact. J AIAA 1989; 27:639-46.
74. [74] Schonberg WP, Taylor RA, Horn JR. An analysis of perforation and ricochet phenomena. NASA TM-100319, Feb. 1988.
75. [75] Stellingwerf RF, Wingate CA. Impact modeling with smooth particle hydrodynamics. Int J Impact Engng 1993; 14:707-18.
76. [76] Summers JL, Charters AC. High-speed impact of metal projectiles in targets of various materials. Proc 3rd Symp on Hypervelocity Impact. Chicago, Armour Research Foundation of the Illinois Institute of Technology, 1959:101-13.
77. [77] Summers JL. Investigations of high-speed impact: regions of impact and impact at oblique angles. NASA Technical Note D-94, 1959.
78. [78] Schonberg WP, Taylor RA. Analysis of oblique hypervelocity impact phenomena for meteoroid/space debris protection system design. Proc of the AIAA SDM Issues of the International Space Station Symposium, Paper No. 882463, 1988.
79. [79] Schonberg WP. Hypervelocity impact response of space structures. ASME, New York, AMD 1989; 103:257-73.
80. [80] Schonberg WP, Bean AJ. Hypervelocity impact response of aluminum multi-wall structures. Acta Astronautica 1991; 25:363-73.
81. [81] Schonberg WP, Peck JA. Multi-wall structural response to hypervelocity impact - numerical predictions vs experimental results. Int J Impact Engng 1993; 13:117-32.
82. [82] Schonberg WP, Yang P. Response of space structures to orbital debris particle impact. Int J Impact Engng 1993; 14:647-58.
83. [83] Schonberg WP. Effect of internal stress fields on the perforation response of dual-wall structures under hypervelocity impact. Int J Impact Engng 1993; 14:637-46.
84. [84] Shephard GLY, Scheer SA. Secondary debris impact damage and environmental study. Int J Impact Engng 1993; 14:671-82.
85. [85] Schonberg WP. Debris cloud material characterization for hypervelocity impacts of single and multimaterial projectiles on thin target plates. Shock Vib 1995; 2:273-87.
86. [86] Jolly WH, Williamsen JE. Statistical ballistic limit curve regression for Space Station Freedom meteoroid/debris shielding. Int J Impact Engng 1993; 14:395-406.
87. [87] Schmidt RM, Housen KR, Bjorkman MD, Poormon KL, Piekutowski AJ. Advanced all-metal orbital debris shield performance at 7 to 17 km/s. Int J Impact Engng 1995; 17:719-30.
88. [88] Williams AE. The effect of phase changes on target response. Int J Impact Engng 1995; 17:937-47.
89. [89] Christiansen EL. Design and performance equations for advanced meteoroid and debris shields. Int J Impact Engng 1993; 14:145-55.
90. [90] Fahrenthold EP. Oblique hypervelocity impact simulation for Whipple-shield protected structures. Int J Impact Engng 1995; 17:291-302.
91. [91] Fahrenthold EP, Yew CH. Hydrocode simulations of hypervelocity impact fragmentation. Int J Impact Engng 1995; 17:303-10.
92. [92] Grady DE, Kipp ME. Fragmentation of solids under dynamic loading. In: Wierzbicki T, Jones N, editors. Structural failure. New York: Wiley, 1989.
93. [93] Zener C, Peterson RE. Mechanics of armor penetration. Watertown Arsenal Report No. 710/492, 1943.
94. [94] Recht RF, Ipson TW. Ballistic perforation dynamics. J Appl Mech 30 Ser E Trans ASME 1963:384-90.
95. [95] Ipson TW, Recht RF. Ballistic penetration resistance and its measurement. Exp Mech 1975; 15:249-57.
96. [96] Recht RF, Yatteau JD. Multiple plate penetration modeling for deforming and yawing ballistic penetrators which lose mass. Proc 7th Int Symp Ballistics, The Hague, 1983:271-80.
97. [97] Awerbuch J, Bodner SR. An investigation of oblique perforation of metallic plates. Exp Mech 1977; 17:147-53.
98. [98] Awerbuch J. Bodner SR. Analysis of the mechanics of perforation of projectiles in metallic plates. Int J Solid Struct 1974; 10:671-84.
99. [99] Goldsmith W, Finnegan SA. Normal and oblique impact of cylindro-conical and cylindrical projectiles on metallic plates. Int J Impact Engng 1986; 4:83-105. See also: Naval Weapons Center, China Lake, CA, NWC TP 6479, 1985.
100. [100] Virostek SP, Dual J, Goldsmith W. Direct force measurement in normal and oblique impact of plates by projectiles. Int J Impact Engng 1987; 6:247-69.
101. [101] Masket AV. The measurement of forces resisting armor penetration. J Appl Phys 1949; 10:132-40.
102. [102] Yeshurun Y, Rosenberg Z. Projectiles fracture mechanisms as a result of oblique impact. Proc 14th Int Symp Ballistics, (TB35) 1993: 537-44.
103. [103] Project Thor. The resistance of various metallic materials to perforation by steel fragments; empirical relations for residual fragment velocity and fragment weight. Ballistic Analysis Laboratory, Johns Hopkins University, Technical Report No. 4, 1961.
104. [104] Project Thor. The resistance of various non-metallic materials to perforation by steel fragments; empirical relations for residual fragment velocity and residual weight. Ballistic Analysis Laboratory, Johns Hopkins University, Technical Report No. 51, 1963.
105. [105] Joint Technical Coordinating Group for Munitions Effectiveness (Aberdeen Proving Ground). Penetration equations handbook for kinetic energy penetrators. 61 JTCG/ME, Aberdeen, 1977.
106. [106] Falcovitz J, Mayseless M, Tauber Z, Keck D, Kennedy R, Ofstedahl K, Singh P. A computer model for oblique impact of a rigid projectile at ductile layered targets. Proc 11th Int Symp Ballistics, (TB9/1-11) 1989; II:311-21.
107. [107] Backman ME. Analysis of oblique impacts of cylindro-conical projectiles against plates. Ridgecrest, CA, 93555, COMARCO Inc. Report on FMC Contract 4004-02, Nov. 1986.
108. [108] Zaid M, Paul B. Oblique perforation of a thin plate by a truncated conical projectile. J Franklin Inst 1959; 268:24-45.
109. [109] Zaid M, Paul B. Mechanics of high-speed projectile perforation. J Franklin Inst 1957; 264:117-26.
110. [110] Paul B, Zaid M. Normal perforation of a thin plate by truncated projectiles. J Franklin Inst 1958; 265:317-35.
111. [111] Krafft JM. Surface friction in ballistic penetration. J Appl Phys 1955; 26:1248-53.
112. [112] Yarin AL, Rubin MB, Roisman IV. Normal and oblique penetration of a rigid projectile into an elastic-plastic target. Proc 15th Int Symp Ballistics, (TB 12) 1995:83-90.
113. [113] Tate A. Long rod penetration model - Part I. Int J Mech Sci 1986; 28: 535-48.
114. [114] Ravid M, Bodner SR. Dynamic perforation of viscoplastic plates by rigid projectiles. Int J Engng Sci 1983; 21:577-91.
115. [115] Pellegri M, Berlenghi S, Mariotti P, Paluffi A, Melara O. Investigation of scaling effects in penetration. Proc 11th Int Symp Ballistics. (TB26/1-12). 1989:481-92.
116. [116] Schultz JC, Heimdahl OER. Lagrangian modelling of blunt projectile impacts against thick plates at obliquity. In: Computational techniques for contact, impact penetration and perforation of solids New York, ASME 1989; AMD-103:337-47.
117. [117] Allen WA, Mayfield EB, Morrison HL. Dynamics of a projectile penetrating sand, J Appl Phys 1957; 28: Part I: 370-6; Part II 1331-5.
118. [117] Allen WA, Mayfield EB, Morrison HL. Dynamics of a projectile penetrating sand, J Appl Phys 1957; 28: Part I:370-6; Part II 1331-5.
119. [118] Backman ME, Finnegan SA, Witham KG. The formation of stagnation zones in stable penetration of brittle materials. Proc 6th Int Symp Ballistics, 1981:494-501.
120. [119] Randles PW, Carney TC, Libersky LD, Renick JD, Petchek AG. Calculations of oblique impact and fracture of tungsten cubes using smoothed particle hydrodynamics. Int J Impact Engng 1995; 17:661-72.
121. [120] Beth RA. Terminal ballistics on concrete. In: Effects of impact and explosions, 1. National Defense Research Council Summary Technical Report Div. 2 (DDC File AD-221-586), 1946:191-228.
122. [121] National Defense Research Council, Summary Technical Report Div. 2 Effects of Impacts and Explosions, Vol. 1, (AD-221-586), 1946:219.
123. [122] Curtis CW. Terminal ballistics of armor. Effects of impact and explosions, Vol. 1 (AD-221-586) 1946:160-90.
124. [123] Conrad AA. The effect of plate tensile strength on the ballistic limits of 3″.0 STS and 4″.0 Class B armor against 3″ M82 capped projectiles at 20″, 30″ and 40″ obliquity. U.S. Naval Proving Ground, Dahlgren, Virginia, Report No. 14-46, 1946.
125. [124] Allen WA, Mapes JM, Wilson WG. An effect produced by the oblique impact of a cylinder on a thin target. J Appl Phys 1954; 25:675-6.
126. [125] Walsh JM, Shreffler RG, Willing FJ. Limiting conditions for jet formation in high velocity collisions. J Appl Phys 1953; 24:349-59.
127. [126] Johnson WP, Collins LI, Taylor TM. Expected residual velocities of cubes perforating armor material as a function of projectile size and obliquity angle. U.S. Army Ballistic Research Laboratories, Aberdeen Proving Ground, MD, BRL Memorandum Report No. 2011, 1969.
128. [127] Zarkades A. Improved high strength armor steel through texturing. Army Materials and Mechanics Research Center, Watertown, MA. AMMRC TR 79-52, 1979.
129. [128] Woodward RL, Baldwin NJ. Oblique perforation of targets by small armor-piercing projectiles. J Mech Engng Sci 1979; 21:85-91.
130. [129] U.S. Army Materials Research Agency. Ballistic properties of rolled face hardened armor and rolled homogeneous armor of various hardnesses at normal incidence and at various obliquities. Watertown, MA, No. 478866, 4/1/56, ∼1956.
131. [130] Kagayama S, Nakagawa Y, Matsumoto Y. Penetration of aluminium-alloy armor by a bullet. Proc 8th Int Symp Ballistics, 1984; b.VIII:7-12.
132. [131] Kageyama S, Usui T. On the penetration of projectiles into targets (streak photography measurements). Proc. 16th Int Congr on High Speed Photography and Photonics. Proc SPIE, Int Soc for Optical Engng 1985; 491:part. 2, 556-60.
133. [132] Alexander MD, Finnegan SA, Zimmermann RA, Yatteau JD. Mechanical response of penetrators with reactive metal cases against simulated-concrete targets. Naval Weapons Center, China Lake, CA NWC-TM 6147, 1988.
134. [133] Kolkert WJ, van Amelsfort RJM. Ballistic pendulum methodology to study armour - anti-armor interaction. Proc 33rd Aero Ballistic Range Assoc Meet, Santa Barbara, 1982.
135. [134] Richiazzi AJ, Brown CJ. Perforation equations for tungsten alloy fragments. U.S. Army Ballistic Research Laboratories, Aberdeen Providing Ground, MD, BRL Memorandum Report No. 2739, 1977.
136. [135] Madhu V, Bhat TB, Gupta NK. Perforation and ricochet of ogive shaped projectiles when subjected to ballistic impact on metal plates. In: Impact, waves and fracture. AMD 205, ASME, 1995:239-48.
137. [136] Gupta NK, Madhu V. Normal and oblique impact of a kinetic energy projectile on mild steel plates. Int J Impact Engng 1992; 12:333-42.
138. [137] Herrmann W, Jones AH. Survey of hypervelocity impact information. Aeroelastic and Structures Research Laboratory, MIT, A.S.R.I. Report No. 99-1 September 1961.
139. [138] Bryan GM. A model of oblique impact. Proc. 4th Hypervelocity Symp, vol. III, 1960.
140. [139] Potts RL. Heuristic model of hypervelocity impact, normal and oblique cratering, erosion and multi-layer penetration. AIAA Paper 96-1402, 1996.
141. [140] Yu S, Sun G, Tan Q. Experimental laws of cratering for hypervelocity impacts of spherical projectiles into thick targets. Int J Impact Engng 1994; 15:67-77.
142. [141] McMillen LD, Dunbar LE, Jackson D. Heatshield materials erosion at hypersonic velocities. AIAA Paper 76-321, 1976.
143. [142] Melosh HJ. Impact cratering: a geologic process. New York: Oxford University Press, Oxford: Clarendon Press, 1989.
144. [143] Piekutowski AJ. Debris clouds generated by cylindrical projectiles with thin aluminum plates. Int J Impact Engng 1987;5:509-18.
145. [144] Ari N, Wilbeck JS. Debris fragment characterization in oblique hypervelocity impacts. Int J Impact Engng 1993; 14:37-46.
146. [145] Schwer LE, Day J. Computational techniques for penetration of concrete and steel targets by oblique impact of deformable projectiles. Nucl Engng Des 1991; 125:215-38.
147. [146] Cullis IG, Theoretical studies on the penetration of explosively formed projectiles. Proc 11th Int Symp Ballistics 1989; II:243-52.
148. [147] Nebulsine PE, Lo EY, Ferguson RD. Tungsten pellet fragment field characterization. Int J Impact Engng 1995; 17:583-93.
149. [148] Johnson W, Sengupta AY, Ghosh S. High velocity oblique impact and ricochet mainly of long rod projectiles: an overview. Int J Mech Sci 1982; 24:425-36.
150. [149] Silsby GF. Penetration mechanics of anti-armor kinetic energy penetrators. Havre de Grace, MD, 1987.
151. [150] Tate A. A theory for the deceleration of long rods after impact. J Mech Phys Solids 1967; 15:387-99.
152. [151] Tate A. Further results in the theory of long rod penetration. J Mech Phys Solids 1969; 19:121-3.
153. [152] Tate A. A possible explanation for the hydrodynamic transition in high speed impact. Int J Mech Sci 1977; 28:535-48.
154. [153] Tate A. Long rod penetration models - Part II: Extensions to the hydrodynamic theory of penetration. Int J Mech Sci. 1986; 28:599-612.
155. [154] Hohler V, Schneider E, Stilp AP, Tham R. Length and velocity reduction of high density rods perforating mild steel and armor steel plate. Proc 4th Int Symp Ballistics, 1978.
156. [155] Falcovitz J, Mayseless M, Luttwak G, Birnbaum N. Long-rod projectile bending. Proc 14th Int Symp Ballistics, (TB6), 1993: 261-70.
157. [156] Senf H, Rothenhäusler H, Scharpf F, Both A, Pfrang W. Experimental and numerical investigation of the ricochetting of projectiles from metallic surfaces. Proc 6th Int Symp Ballistics, 1981:510-21.
158. [157] Walker JD, Mullin SA, Cox PA. Oblique penetration: dynamic plasticity modeling and experimental data. Proc 13th Int Symp Ballistics, (GS-4/1) 1993:63-70.
159. [158] Piekutowski AJ, Forrestal MJ, Poorman KL, Warren TL. Perforation of aluminum plates with ogive-nose steel rods at normal and oblique impact. Int J Impact Engng 1996; 18:877-87.
160. [159] Yew C-H, Stirbis PP. Penetration of projectile into terrestrial target. J Engng Mech Div ASCE 1978; EM 2:273-86.
161. [160] Rosenberg Z, Forrestal MJ. Perforation of aluminum plates with conical-nose rods - additional data and discussion. J Appl Mech 1988; 55:236-8.
162. [161] Forrestal MJ, Luk VK, Rosenberg Z, Brar NS. Perforation of aluminum armor plates with conical-nose projectiles. Mech Mater 1990; 10:97-105.
163. [162] Forrestal MJ, Luk VK, Rosenberg Z, Brar NS. Penetration of 7075-T651 aluminum targets with ogival-nose rods. Int J Solids Struct 1992; 29:1729-36.
164. [163] Surov VS. Oblique impact of metal plates, translated from Fizika, Goreniya i Veryva. (Combustion, Explosions and Shock Waves) 1988; 24:115-20.
165. [164] Tate A. A simple hydrodynamic model for the strain field produced in a target by the penetration of high speed long rod projectiles. Int J Engng Sci 1978; 16:845-58.
166. [165] Norris DM, McMaster WH, Wilkins ML. Long-rod projectiles against oblique targets: analysis and design recommendations. Lawrence Livermore Laboratory, Report UCRL-52057, April 1976.
167. [166] Norris DM, Scudder JK, McMaster WH, Wilkins ML. Mechanics of long-rod penetration at high angles of obliquity. Lawrence Livermore Laboratory, Preprint UCRL 77941, May 1976.
168. [167] Hantel LW, Taylor JW. PHERMEX evaluation of Air Force designed U-0.75 wt% Ti penetrators. Los Alamos Scientific Laboratory, Rept. LA 5817, 1975.
169. [168] Matuska DA, Osborn JJ. HULL/EPIC3 linked Eulerian Lagrangian code in three dimensions. AFATL-TR-78-81, 1981.
170. [169] Jonas GH, Zukas JA. Mechanics of penetration: analysis and experiment. Int J Engng Sci 1978; 16:879-903.
171. [170] Young CW, Young ER. Simplified analytical model of penetration with lateral loading. Sandia Report SAND84-1635, 1984.
172. [171] Bishop RF, Hill R, Mott NF. The theory of indentation and hardness tests. Proc Phys Soc Lond 1945; 57:147-59.
173. [172] Bernard RS, Creighton DC. Non-normal impact and penetration analysis for hard targets and small angles of attack. Waterways Experiment Station, Vicksburg, MS, Techn. Rept. 5-78-14, Final Report, 1978.
174. [173] Picatinny Arsenal. Progress Repts No. 4 and 5, AVCO Corp., Contract No. DAAA21-71-C-0517, 1971. See also Henderson D. Terradynamic impact and penetration technology. Proc Fuze/Munitions Environment Characterization Symposium, II. Picatinny Arsenal, Dover, NJ, Oct. 1975.
175. [174] Fujita RK, Cort GE. Comparison of multidimensional calculations of long rod impacts on oblique plates. In: Computational techniques for contact, impact, penetration and perforation of solids. ASME: New York, 1989; AMD 103:249-56.
176. [175] Tate A, Green KEB, Chamberlain PG, Baker RG. Model scale experiments on long rod penetration. Proc 4th Int Symp Ballistics, Monterey, CA, 1978:1-21.
177. [176] Reid SR, Edmonds AJ, Johnson W. Bending of long steel and aluminum rods during impact with a rigid target. J Mech Engng Sci 1981; 23:85-92.
178. [177] Johnson W, Sengupta AK, Ghosh SK. Plasticine modelled high velocity oblique impact and ricochet of long rods. Int J Mech Sci 1982; 24:437-55.
179. [178] Tate A. A simple estimate of the minimum target obliquity required for the ricochet of a high speed long rod projectile. J Phys D: Appl Phys 1979; 12:1825-9.
180. [179] Jeanquartier R, Odermatt W. Post-perforation length and velocity of KE projectiles with single oblique targets. Proc 15th Int Symp Ballistics, (TB-2) 1995:245-52.
181. [180] Walters W, Zukas JA. Fundamentals of shaped charges. New York: Wiley-International, 1989.
182. [181] Andersen Jr CE. An overview of the theory of hydrocodes. Int J Impact Engng 1987; 5:33-59.
183. [182] Sedgwick RT, Hegeman LJ, Herrmann RG, Waddell JL. Numerical investigations in penetration mechanics. Int J Engng Sci 1978; 16:859-69.
184. [183] Rosinky W. Lagrangian finite-element analysis of penetration mechanics. ETR (LLNL). Oct. 1986: 18-22.
185. [184] Johnson GR, Stryk RA. Two- and three-dimensional computational analysis of projectile-concrete impact. AFATL-TR-87-57, 1987.
186. [185] Johnson GR, Stryk RA, Holmquist TJ, Souka OA. Recent EPIC code developments for high velocity impact: 3D element arrangements and 2D fragment distribution. Int J Impact Engng 1990; 10:281-94.
187. [186] Yaziv D, Riegel JP. The application of the integral theory of impact to model penetration of hypervelocity impact, Int J Impact Engng 1993; 14:843-50.
188. [187] Riegel JP, Mullin SA, Tenenbaum D. Dynamic plastic penetration modeling with CAAD. Combat Vehicle Survivability Symp, USA, 1990.
189. [188] Forrestal MJ, Pietukowski AJ, Luk VK. Long-rod penetration into simulated geological targets at an impact velocity of 3 km/s. Proc 11th Int Symp Ballistics, II (TB-4) 1989:253-62.
190. [189] Baker J, Williams A. Hypervelocity penetration of plate targets by rod and rod-like projectiles. Int J Impact Engng 1987; 5:101-110.
191. [190] Cullis IG, Lynch NJ. Performance of model scale long rod projectiles against complex targets over the velocity range 1700-2200 m/s. Int J Impact Engng 1995; 17:263-74.
192. [191] Charters AC, Menna TL, Piekutowski AJ. Penetration dynamics of rods from direct ballistic tests of advanced armor components at 2-3 km/s. Int J Impact Engng 1990; 10:93-106.
193. [192] Hohler V, Stilp AJ, Weber K. Terminal ballistics behavior of tungsten-rhenium rod projectiles. Proc 14th Int Symp Ballistics, 1993; II:479-87.
194. [193] Holmberg L, Lundberg P, Westerling L. An experimental investigation of WHA long rod penetrating oblique steel plates. Proc 14th Int Symp Ballistics 1993; II:515-24.
195. [194] Ernst HJ. Optical measurements of the obliquity influence on the crater shape of LRP-impacted steel targets. Proc 12th Int Symp Ballistics 1990:139-48.
196. [195] Johnson WE, Anderson CE. History and application of hydrocodes in hypervelocity impact. Int J Impact Engng 1987; 5:423-39.
197. [196] Sedgwick RT, Waddell JL, Wilkinson GM. High velocity long rod impact: theory and experiment. Proc 10th Int Symp Ballistics 1987:1-9.
198. [197] Schulz JC. WHAP, A finite element computer code for the structural analysis of axisymmetric warheads. Naval Weapons Center, China Lake, CA, NWC TP 6369, 1982.
199. [198] Belytschko T, Lin JI. A three-dimensional impact-penetration algorithm with erosion. Int J Impact Engng 1987; 5:111-27.
200. [199] Johnson GR, Stryk RA. Eroding interlace and improved tetrahedral element algorithms for high velocity impact computations in three dimensions. Int J Impact Engng 1987; 5:411-21.
201. [200] Pyan JJ, Kennedy CM, Hruska D. A new sliding algorithm for EPIC 2. Int J Impact Engng 1990; 10:473-82.
202. [201] Shreffler DR, Zukas JA. Numerical simulation of segmented penetration impact. Int J Impact Engng 1990; 10:487-97.
203. [202] Belytschko T, Lin JL, Kennedy JM, Ong SJ. Hourglass control in linear and nonlinear problems. Comp Meth Appl Mech Engng 1984; 43:251-76.
204. [203] Johnson GR, Petersen EH, Stryk RA. Incorporation of an SPH option for a wide range of high velocity impact computations. Int J Impact Engng 1993; 14:385-94.
205. [204] Johnson WL, Anderson CE. History and application of hydrocodes in hypervelocity impact. Int J Impact Engng 1987; 5:423-39.
206. [205] Silsby GF. Penetration of semi-infinite steel targets by tungsten long rods at 1.3 to 4.5 km/s. Proc 8th Int Symp Ballistics, 1984:TB/31-6.
207. [206] Culp MF. Flash X-ray investigation of penetrator terradynamics. Proc 2nd Int Symp Ballistics, 1976.
208. [207] Roecker ET. Rationale for an earth penetrator stability study. Ballistic Research Laboratories, Aberdeen, MD BRL MR 2733, 1977.
209. [208] Goldsmith W, Tam E, Tomer D. Yawing impact on thin plates by blunt projectiles. Int J Impact Engng 1995; 16:479-98.
210. [209] Wu E, Goldsmith W. Normal impact of blunt projectiles on moving targets: analytical considerations. Int J Impact Engng 1990; 405-32.
211. [210] Liss J, Goldsmith W, Hauser FE. Constraint to side flow in plates. J Appl Mech 1983; 50:694-8.
212. [211] Beynet P, Plunkett R. Plate impact and plastic deformation by projectiles. Exp Mech 1971; 11:64-70.
213. [212] Liss J, Goldsmith W, Kelly JM. A phenomenological penetration model of thin plates. Int J Impact Engng 1983; 1:321-41.
214. [213] Prather RN. A predictive model for assessing bullet performance. Proc 11th Int Symp Ballistics, (BNA 9/1-10) 1989; II:87-96.
215. [214] Sturdivan LM, Bexon B. A unified yaw-penetration model for bullets. Chemical Systems Laboratory Techn. Rept. ARCSL-TR-81004, May 1982.
216. [215] Jamet F, Giraud M, Weihrauch G. Experimental simulation of the terminal ballistics of explosively formed projectiles. Proc 10th Int Symp Ballistics, 1987.
217. [216] Yaziv D, Walker JD, Riegel III JP. Analytical model of yawed penetration in the 0 to 90 degrees range. Proc 13th Int Symp Ballistics, (TB-2/1-2-7), 1992:17-23.
218. [217] Johnson GW, Geauque RE. Penetration of face hardened bullet proof steel by yawed .50 cal. A. P. bullets at 0° obliquity. U.S. Naval Proving Ground, Dahlgren, VA. Report No. 10-43, 9 July 1943.
219. [218] Cole DM, Farrell DR. Bullet penetration in snow. U.S. Army Cold Regions Research and Engineering Laboratory, Hanover, NH. Special Report 79-25, July 1979.
220. [219] Grabarek C. TCG/MER working party for KE penetrators. Information Exchange Meeting, Proceedings, Aberdeen Proving Ground, MD, 1973.
221. [220] Roecker RT. On yawing motion, velocity decay and plate deflection of projectiles penetrating cavitating media. U.S. Army Ballistic Research Laboratory, Aberdeen Proving Ground, MD, Memorandum Report BRL-MR-3514, April 1986.
222. [221] Roecker ET, Richiazzi AJ. Stability of penetrators in dense media. In: Sih GC, editor. Proc 14th Ann Meet Soc Engng Sci, Recent advances in engineering science. Lehigh University Publications, 1978:107-9.
223. [222] Roecker ET, Richiazzi AJ. Stability of penetrators in dense fluids. Int J Engng Sci 1978; 16:917-20.
224. [223] Roecker ET, Piddington MJ, Neades DN, Sturdivan LM, Jameson JW. Comparative analysis of gelatin correlation techniques for bullet lethality, Part 1. U.S. Army Ballistic Research Laboratories, Aberdeen, MD, BRL MR 2711, 1976.
225. [224] Johnson GR, Stryk RA. Two- and three-dimensional computational analysis of projectile-concrete impact. Air Force Armament Laboratory Eglin Air Force Base, Report AFATL-TR-87-57, 1987.
226. [225] Reaugh J. Penetration of yawed projectiles. Lawrence Livermore National Laboratory, UCRL-ID-104890,1990.
227. [226] Allen WA, Rogers JW. Penetration of a rod into a semi-infinite target. J Franklin Inst 1961; 261:272-5.
228. [227] Alekseievski VP. Penetration of a rod into a target at high velocity. Combustion, explosion and shock waves (Fiz. Goren Vzryva) 1966; 2:63-70 (99-106).
229. [228] Bjerke TW, Silsby GF, Scheffler DR, Mudd RM. Yawed long rod armor penetration. Int J Impact Engng 1992; 12:281-92.
230. [229] Riegel JP, Mullin SA, Tenenbaum D. Dynamic plastic penetration modeling with CAAD. Proc Combat Vehicle Survivability Symp, USA 1990.
231. [230] Yaziv D, Rosenberg Z, Riegel JP. Penetration capability of yawed long rod penetration. Proc 12th Int Symp Ballistics 1990:202-207.
232. [231] Bernard RS, Creighton DC. Projectile penetration into soil and rock: analysis for non-normal impact. Waterways Experiment Station, Vicksburg, MS, Report WES TR-SL-19-15, May 1979.
233. [232] Young CW. Equations for predicting earth penetration by projectiles: an update. Sandia Report 88 SAND88-0013, 1988.
234. [233] Heuze FE. An overview of projectile penetration into geological materials, with emphasis on rocks. Int J Rock Mech 1990; 27:1-14.
235. [234] Predebon WP. Bending analysis of yawed rod impacts: a dynamic plastic hinge model. Aberdeen Proving Grounds, MD, BRL Preliminary Report, 1977.
236. [235] Mayseless M, Kivity Y, Rosenberg G, Betser AA. Bending waves in yawed rod impacts. Proc 6th Int Symp Ballistics 1981:340-5.
237. [236] Zukas J. Impact dynamics. In: Vinson JR, editor. Emerging technologies in aerospace structures, design, structural dynamics and materials. New York: ASME, 1980:161-98.
238. [237] Roecker E, Grabarek C. The effect of yaw and pitch on long rod penetration into rolled homogeneous armor at various obliquities. Proc 9th Int Symp Ballistics 1986:2-467 - 2-473.
239. [238] Schmidt EM. The methodology to evaluate the effect of yaw on penetration. Proc 12th Int Symp Ballistics 1990; 2:377-83.
240. [239] Hohler V, Stilp AJ. Influence of primary yaw angle on the secondary yaw angle during armor perforation. Proc 6th Int Symp Ballistics 1981:333-9.
241. [240] Johnson GR, Stryk RA, Schonhardt JA, Cook WH, Collins JA. Effects of velocity, obliquity, and yaw for a penetrator impacting concrete targets, with and without reinforcing steel. Proc 13th Int Symp Ballistics, (TB-6/1-6/8) 1992:49-56.
242. [241] Cagliostro DJ, Mandell DA, Schwalbe LA, Adams TF, Chapyak EJ. MESA 3-D calculations of armor penetration by projectiles with combined obliquity and yaw. Int J Impact Engng 1990; 10:81-92.
243. [242] Johnson GR, Cook WH. Lagrangian EPIC code computations for oblique yaw-rod impacts onto thin plate and spaced-plate targets at various velocities. Int J Impact Engng 1993; 14:373-83.
244. [243] Birckhoff G, McDougall D, Pugh E, Taylor GI. Explosives with lined cavities. J Appl Phys 1948; 19:563-82.
245. [244] Hill R, Mott N, Pack D. A.R.D. Theoretical Research Report No. 2/44 (January) and 12/44 (March) 1944.
246. [245] Pack DC, Evans WM. Penetration by high velocity (Munroe) jets: 1. Proc Phys Soc (London) 1951; B64:298-300.
247. [246] Walters WP, Zukas JA. Fundamentals of shaped charges. New York: Wiley, 1989.
248. [247] Walters WP. High velocity impact dynamics. New York: Wiley-Interscience, 1990 Chapter 11.
249. [248] Bless SJ, Barber JP, Bertke RS, Swift HF. Penetration mechanics of yawed rods. Int J Engng Sci 1978; 16:829-34.
250. [249] Bless SJ, Barber JP. Bending waves in yawed rod impacts. J Ballistics 1978; 2:281-98.
251. [250] Bukharev YI, Zhukov VI. Model of the penetration of a metal barrier by a rod projectile with an angle of attack. Combustion, explosion and shock waves (Fiz. Goren Vzryva). 1995; 31:362-7.
252. [251] Chandler JS. Hypervelocity impact tests of long rod and segmented rod penetrators. Arnold Engineering and Development Center Test Summary Report AEDC-TSR-89-V7, 1989.
253. [252] Chandler JS. Hypervelocity impact tests of long rod penetrators - phase II. Arnold Engineering and Development Center Test Summary Report AEDC-TSR-89-V7, 1989.
254. [253] Piekutowski AJ, Anderson CE. Post-perforation characteristics of yawed long-rods. Proc 14th Int Symp Ballistics 1993:527-36.
255. [254] Rosenberg Z, Okajima K. Bless SJ. Yaw rates of long rod penetrators after normal impact. Proc 11th Int Symp Ballistics 1989; 2:577-82.
256. [255] Dickinson DL, Yatteau JD, Recht RF. Fragment breakup. Int J Impact Engng 1987; 5:249-60.
257. [256] Recht RF, Ipson TW, Wittrock EP. Transformation of terminal ballistic threat definitions into vital component malfunction predictions. Naval Weapons Center, China Lake, CA, NWC, NWCTP 4871, 1969.
258. [257] Yatteau JD, Dunn JA, Dickinson DL. Terminal ballistic impact fracture of steel cubes. Naval Surface Weapons Center, Dahlgren, NAVSWC TR-91-397, 1994.
259. [258] Yatteau JD, Dunn JA. Penetration methodology for bar fragments. Air Force Armament Laboratory, AFATL-TR-90-100, 1991.
260. [259] Schmeling WA, Ipson TW. Terminal ballistics of elongated fragments. Naval Weapons Center, China Lake, CA, NWC TP 5449, 1972.
261. [260] Bernard RS, Creighton DC. Projectile penetration in solid and rock: analysis for non-normal impact. Vicksburg, MS, Waterways Experiment Station, WES-S-79-14, 1979.
262. [261] Fugelso E, Taylor JW. Evaluation of combined obliquity and yaw for U 0.75 wt% Ti penetrators. Los Alamos Scientific Laboratory, LA-7402-MS, 1978.
263. [262] Hou X. Impact on rotating targets. PhD Dissertation. University of California, Berkeley, 1993.
264. [263] Hou X, Goldsmith W. Numerical simulation of impact on moving plates. In: High performance computing in computational dynamics. New York: ASME, 1994; CED 6:121-8.
265. [264] Goldsmith W, Hou X. Projectile impact on rotating plates. In: Kawata K, Shioiri J, editors. Proc of the IUTAM Symp on Constitutive Relation in High/Very High Strain Rates, Noda, Japan, Oct. 1995, Tokyo: Springer, 1996:171-85.
266. [265] Hou X, Goldsmith W. Projectile perforation of moving plates: experimental results. Int J Impact Engng 1996; 18:859-75.
267. [266] Prakash A. Supercomputer simulations of impact of cylindrical projectiles on moving plates. Proc of the 1991 Summer Computer Simulation Conf. (SESC, 23rd). Baltimore, MD, 1991:543-47.
268. [267] Prakash A. Three dimensional simulations of impact of projectiles on moving plates. Proc of the 13th Int Symp Ballistics (TB-10/1-7) 1992:69-75.
269. [268] Li K. A new approach to study impact on moving targets. Proc 15th Int Symp Ballistics (TB35) 1995:267-74.
270. [269] Knott JF. Fundamentals of fracture mechanics. London: Butterworths, 1973.
271. [270] Dugdale DS. Yielding of steel sheets containing slits. J Mech Phys Solids 1960; 8:100-4.
272. [271] Barsom JM, Rolfe ST. Fracture and fatigue control in structures. Englewood Cliffs, NJ:Prentice-Hall, 1987.
273. [272] Thomson WT. An approximate theory of armor penetration. J Appl Phys 1955; 26:80-2.
274. [273] Mai YW, Cotterell B. The essential work of fracture for tearing ductile metals. Int J Fracture 1984; 24:229-236.
275. [274] Shadbolt PJ, Corran RSJ, Ruiz C. A comparison of plate perforation models in the sub-ordnance impact velocity range. Int J Impact Engng 1983; 1:23-49.
276. [275] Giavanola JH, Finnie I. The crack opening displacement (COD) as a fracture parameter and a comparative assessment of the COD and the J-integral concepts. Solid Mech. Arch 1984; 9:227-57.
277. [276] Erdogan F, Ratwani M. Fracture of cylindrical and spherical shell containing a crack. Nucl Engng Des 1972; 20:265-86.
278. [277] Krafft JM. Surface friction in ballistic penetration. J Appl Phys 1955; 26:1248-52.
279. [278] Singh S. A note on penetration by rotating shaped charges. Proc Phys Soc (London) 1958; 71:508-12.
280. [279] Singh S. Penetration of rotating shaped charges. J Appl. Phys 1960; 31:578-81.
281. [280] Simon LE. German research in World War II. New York: Wiley, 1947.
282. [281] Schall R, Thomer G. Etudes par radiographie-éclair des phenoménes de charge creuses. Photographie et Cinematographie Ultra-Rapides, Actes du 2eme Congres International de Photographie et Cinematographie ultra-rapides (Proc. 2nd Int Congr on High-Speed Photography, presented by P. Naslin and J. Vivie), Dunod Paris, 1954:261-6.
283. [282] Yatteau JD. Personal communication, 1990.
284. [283] Finnie M, London LW, Moss GM. The ricochet of spinning projectiles off water. Proc 12th Int Symp Ballistics (San Antonio) 1990; 3:129-38.
285. [284] Ruiz O, Goldsmith W. Controlled tumbling of projectiles - I. Theoretical model. Int J Impact Engng 1988; 7:101-15.
286. [285] Ruiz O, Goldsmith W. Controlled tumbling of projectiles - II. Experimental results. Int J Impact Engng 1988; 7:285-305.
287. [286] Ruiz O. Generation of Yaw motion in rigid projectiles. MS Thesis, University of California, Berkeley, 1986.
288. [287] Li K, Goldsmith W. Impact on aluminum plates by tumbling projectiles: experimental study. Int J Impact Engng 1996; 18:23-43.
289. [288] Li K, Goldsmith W. An analytical model for tumbling projectile perforation of thin aluminum plates. Int J Impact Engng 1996; 18:45-63.
290. [289] Li K, Goldsmith W. Numerical simulation of perforation of aluminum plates by tumbling projectiles. In: Raycudran AM, Batra RC, editors. Constitutive laws: experiments and numerical implementation, CIMNE, 1995:268-80.
291. [290] Li K. Effect of tumbling of cylindrical projectiles on the impact response of target plates. Dissertation, Univ. of California, 1994.
292. [291] Li K, Goldsmith W. A phenomenological model for perforation of moderately thick plates by tumbling projectiles. Int J Solids Struct 1996; 33:3561-75.
293. [292] Li K, Goldsmith W. Perforation of steel and polycarbonate plates by tumbling projectiles. Int J Solids Struct 1997; 34:4581-96.
294. [293] Taylor GI. The formation and enlargement of a circular hole in a thin plastic sheet. Quart J Mech Appl Math 1948; I:103-24.
295. [294] Bethe H. Attempt of a theory of armor penetration. Frankford Arsenal Ordance Laboratory, Technical Report UN-41-5-23, 1941.
296. [295] Recht R. Ballistic penetration of ship structure. Final Report. Denver Research Institute. Naval Weapons Center, China Lake, NWCTR 5229, 1971.
297. [296] Ross B. The perforation of a porous medium due to projectile impact. Exp Mech 1968; 8:488-95.
298. [297] Persechino MA, Williams AE. Tumbling of hypervelocity rods induced by impact with oblique plate targets. Int J Impact Engng 1992; 14:561-72.
299. [298] Eichelberger RJ, Gehring JW. Experimental test of the theory of penetration by metallic jets. J Appl Phys 1956; 27:63-8.
300. [299] Herrmann W. Nonlinear transient response of solids. In: Pilkey W, Pilkey B, editors. Shock and vibration computer programs, reviews and summaries. Washington, DC: Shock and Vibration Information Center, 1975:151-72.
301. [300] Anderson CE, Bodner S. Ballistic impact: the status of analytical and numerical modeling. Int J Impact Engng 1988; 7:9-35.
302. [301] Anderson CE. An overview of the theory of hydrocodes. Proc 1986 Hypervelocity Impact Symp. Int J Impact Engng 1987; 5:33-59.
303. [302] Herrmann W, Wilbeck JS. Review of hypervelocity penetration theories. Proc 1986 Symp on Hypervelocity Impact. Int J Impact Engng 1987; 5:307-22.
304. [303] Walters WP, Flis WJ, Chou PC. A survey of shaped charge jet penetration models, Int J Impact Engng 1988; 7:307-26. See also Proc XIth Int Symp on Ballistics 1989; II:419-34.
305. [303] Walters WP, Flis WJ, Chou PC. A survey of shaped charge jet penetration models, Int J Impact Engng 1988; 7:307-26. See also Proc XIth Int Symp on Ballistics 1989; II:419-34.
306. [304] Walters WP. Fundamentals of shaped charges. In: Zukas JA, editor. High Velocity impact dynamics. New York: Wiley 1990:731-827.
307. [305] Abrahamson G, Goodier JN. Penetration by shaped-charge jets of non-uniform velocity. J Appl Phys 1963; 34:195-9.
308. [306] Allison FE, Vitali R. A new method of computing penetration variables for shaped-charge jets. Aberdeen Proving Grounds, MD, Ballistic Research Laboratories, BRL Report 1184, 1963.
309. [307] Di Persio R, Simon J, Merendino A. Penetration of shaped charge jets into metallic targets. Aberdeen Proving Grounds, MD, BRL Report No. 1296, 1965.
310. [308] Hohler V, Stilp AJ. Long rod penetration mechanics. In: Zukas JA, editor. High velocity impact dynamics. New York: Wiley, 1990:321-404.
311. [309] Goodier JN. On the mechanics of indentation and cratering in solid targets of strain-hardening metal by impact of hard and soft spheres. Proc 7th Symp Hypervelocity Impact 1966; III:215-59.
312. [310] Hanagud S, Ross B. Large deformation, deep penetration theory for a compressible strain-hardening target material. AIAA J 1971; 9:905-11.
313. [311] Bernard RS. Deep penetration theory for homogeneous and layered targets. Technical Report S-75-9, Soils and Pavement Laboratory, U.S. Waterways Experiment Station, Vicksburg, MS, 1976.
314. [312] Forrestal MJ, Luk VK. Dynamic spherical cavity expansion in an elastic-plastic solid. J Appl Mech Trans ASME 1988; 55:275-9.
315. [313] Luk VK, Forrestal MJ, Amos DE, Dynamic spherical cavity expansion of strain-hardening materials. J Appl Mech Trans ASME 1991; 58:1-6.
316. [314] Forrestal MJ, Luk VK. Penetration into soil targets. Int J Impact Engng 1992; 12:427-44.
317. [315] Yew CH. On the forces produced by oblique projectile impact. Personal communication, 1996.
318. [316] Christman DR, Gehring JW. Analysis of high-velocity penetration mechanics. J Appl Phys 1966; 37:1579-87.
319. [317] Rosenberg Z, Marmor E, Mayseless M. On the hydrodynamic theory of long rod penetration. Int J Impact Engng 1990; 10:483-6.
320. [318] Hill R. The mathematical theory of plasticity. Oxford: University Press, 1950.
321. [319] Chick MC, Frey RB, Bines A. Jet penetration in Plexiglas. Int J Impact Engng 1990; 9:433-9.
322. [320] Orphal DL, Miller CW. Penetration performance of nonideal segmented rods. Int J Impact Engng 1991; 11:457-61.
323. [321] Raftenberg MN. Lagrangian Hydrocode simulations of rolled homogeneous armor plate perforation by a shaped charge jet. Int J Impact Engng 1994; 15:619-43.
324. [322] Frey R, Lawrence W, Chick M. Shock evolution after shaped charge jet impact and its relevance to explosive initiation. Int J Impact Engng 1995; 16:563-70.
325. [323] Charters AC, Menna TL, Piekutowski AJ. Penetration dynamics of rods from direct ballistic tests of advanced armor components at 2-3 km/s. Int J Impact Engng 1990; 10:93-106.
326. [324] Salem SAL, Al-Hassani STS. Penetration by high speed oblique jets: theory and experiment. Int J Mech Sci 1983; 25:871-86.
327. [325] Hawkyard JB, Johnson W, Utoh IO. Simple analysis for the non-symmetric expansion of cylindrical cavities. Int J Mech Sci 1972; 14:603-13.
328. [326] Luttwak G, Kivity Y, Betser AA. Effects of a hypervelocity jet on a layered target. Int J Mech Sci 1982; 20:947-61.
329. [327] Frilling S, Benyami M, Yaziv D. The interaction of shaped charge jets with combined reactive-inert cassettes. Proc 14th Int Symp Ballistics (Ballistics 93) vol. II, 1993:227-35.
330. [328] Golesworthy RC. The effect of transverse velocity on shaped charge performance. Proc 7th Int Symp Ballistics 1983:257-60.
331. [329] Held M. Transverse shaped charges. Proc 8th Int Symp Ballistics II-39-VI147/48, 1984.
332. [330] Held M, Fisher R. Penetration theory for inclined and moving shaped charges. Propellants Explosives Pyrotechnics 1986:115-22.
333. [331] Yadav HS. Interaction of a metallic jet with a moving target. Propellants Explosives Pyrotechnics 1988; 13:74-9.
334. [332] Yadav HS, Kamat PV. Effect of moving plate on jet-penetration. Propellants Explosives Pyrotechnics 1989; 14:12-18.
335. [333] Curtis JP. The effects of a random off-axis velocity component on the penetration achieved by long rod kinetic energy penetrators and shaped charge jets. Int J Impact Engng, 1993; 14:217-28.
336. [334] Marmor E, Me-Bar Y, Mayseless M, Green M. A model for calculating the penetration of an overflying top-attack jet into a moving target. Proc 12th Int Symp Ballistics 1990; II:10-19.
337. [335] Mayseless M, Marmor E, Gov N, Kivity Y, Falcovitz J, Tsur D. Interaction of a shaped charge with reactive and passive cassettes. Proc 14th Int J Ballistics (Ballistics 93) 1993; II:439-48.
338. [336] Hutchings IM, Winter RE, Field JE. Solid particle erosion of metals: the removal of surface material by spherical projectiles. Proc Roy Soc Lond A, 1976; 348:379-92.
339. [337] Hutchings IM. Deformation of metal surfaces by the oblique impact of square plates. Int J Mech Sci 1977; 19:45-52.
340. [338] Hutchings IM, MacMillan NH, Rickersby DG. Further studies of the oblique impact of a hard sphere against a ductile solid. Int J Mech Sci 1981; 21:639-46.
341. [339] Rickerby DG, MacMillan NH. On the oblique impact of a rigid sphere against a rigid-plastic solid. Int J Mech Sci 1980; 20:491-4.
342. [340] Ipson TW, Recht RF, Schmeling WA. Effect of projectile nose shape on ballistic limit velocity, residual velocity and ricochet obliquity. Naval Weapons Center, China Lake, CA, NWC TP 5607, 1973.
343. [341] Okubo J, Hara M. On the determination of stress and strain during impact indentation. J Franklin Inst Oct. 1928; 206:471-88.
344. [342] Kineke Jr JH. Observations of crater formation in ductile materials. Proc 5th Symp on Hypervelocity Impact 1962; 1: Part 2.
345. [343] Hershey AV. The theory of projectile ricochet. Naval Proving Ground, Dahlgren, VA, NPG Rept. 1041, 1955.
346. [344] Schmeling WA, Ipson TW. Characteristics of the deformation of ballistically impacted waveguide. Naval Weapons Center, China Lake, CA, NWC TP 5328, February 1972.
347. [345] Recht RF, Ipson TW. The dynamics of terminal ballistics, Final Report. Contract No. DA-23-072-ORD-1302, DDC File No. Report AD 274128, Appendix AD 328796. Denver Research Institute, Denver, CO, 1962.
348. [346] Zook J. An analytical model of kinetic energy/fragment perforation. Ballistic Research Laboratories, Aberdeen Proving Ground, MD, BRL Memorandum 2797, October 1983.
349. [347] I'Anson AC, Lolck JE, Gouldstone FS. A modern approach to definition of ricochet danger areas for naval use. Proc 11th Int Symp Ballistics (FD/1-11) 1989; 1:833-45.
350. [348] Birckhoff G, Birckhoff GD, Bleick WE, Handler EH, Murnaghan FH, Smith TL. Ricochet off water. Applied Mathematics Panel, Natl. Defense Res. Counc., Memo 42.4M, 1944.
351. [349] Richardson EG. The impact of a solid on a liquid surface. Proc Phys Soc 1948; 61:352-67.
352. [350] Soliman AS, Reid SR, Johnson W. The effect of spherical projectile speed in ricochet off water and sand. Int J Mech Sci 1976; 19:279-84.
353. [351] Bai YL, Johnson W. The effects of projectile speed and medium resistance in ricochet off sand. J Mech Engng Sci 1981; 23:69-75.
354. [352] Daneshi GN, Johnson W. Forces developed during the ricochet of projectiles of spherical and other shapes. Int J Mech Sci 1977; 19:661-71.
355. [353] Kornhauser M. Prediction of forces during grazing impacts on thin targets. Final report, Contract DAAK10-77-M5009, 1 July 1977. Frankfort Arsenal, Philadelphia, July 1977.
356. [354] Zener C. The intrinsinc inelasticity of large plates. Phys Rev 1941; 59:669-73.
357. [355] Ipson TW, Recht RF, Austin CF, Craig RW. Ballistic penetrator deformation. Naval Weapons Center, China Lake, CA, NWC TP 5718, June 1975.
358. [356] Zukas JA, Gaskill B. Ricochet of deforming projectiles from deforming plates. Int J Impact Engng 1996; 18:601-10.
359. [357] Huzita T. On the ricochet motion of a projectile striking a water surface. Proc Phys Soc Japan 1957; 12:208-13.
360. [358] Brickhill P. The dam busters. London: Evans, 1966.
361. [359] Bai VL, Johnson W. An estimate of the effect of back spin on the critical angle in the unyawed ricochet of a cylinder. J Mech Engng Sci 1981; 23:201-5.
362. [360] Johnson W, Danesh GH. Results for the single ricochet of spherical-ended projectiles off sand and clay at up to 400 m/sec. In: Kawata K, Shiori J, editors. Proc IUTAM Symp on High Velocity Deformation of Solids, Berlin: Springer, 1978; 317-43.
363. [361] Reches M. Fragment ricochet off homogeneous soils and its effect on weapons lethality. AMSAA TM No. 79, Army Materiel Systems Analysis Agency, Aberdeen Proving Ground, MD, August 1970.
364. [362] National Defense Research Council. Effects of impact and explosions. 1 Summary Technical Report, Division 2, Washington, DC, (DOC File No. AD 221 586), 1945.
365. [363] Birckhoff G. Ricochet off land surfaces. BRL Report 535, Ballistic Research Laboratories, Aberdeen Proving Ground, MD, 1945.
366. [364] Ezra AA. The plastic response of a simply supported beam to an impact load at the center. Proc 3rd U.S. National Congr Applied Mechanics 1958:513-20.
367. [365] Rosenberg Z, Yeshurun Y, Mayseless M. On the ricochet of long rod projectiles. Proc 11th Int Symp Ballistics (TB28/1-6), 1989:501-6.
368. [366] Johnson W, Sengupta AK, Ghosh SK. Plasticine modelled high velocity oblique impact and ricochet of long rods. Int J Mech Sci 1982; 24:437-55.
369. [367] Johnson W, Reid SR, Sengupta AK, Ghosh SK. Modelling with Plasticine the low speed impact of long rods against inclined rigid targets. Int J Impact Engng 1983; 1:73-83.