Ductility of 0.1-0.6C-1.5Si-1.5Mn ultra high-strength TRIP-aided sheet steels with bainitic ferrite matrix

ISIJ International

Volumn 44, Issue 9, 2004, Pages 1608-1614

  Sugimoto, Koh Ichi ^a   Tsunezawa, Michitaka ^a   Hojo, Tomohiko ^a   Ikeda, Shushi ^b  

^a SHINSHU UNIVERSITY   (Japan)

^b KOBE STEEL LTD   (Japan)

Author keywords

Bainitic ferrite; Ductility; Retained austenite; TRIP; Ultra high strength steel; Warm forming

Indexed keywords

DUCTILITY; FERRITE; FORMING; MARTENSITE; PLASTICITY; STEEL SHEET; THERMAL EFFECTS;

BAINITIC FERRITE; RETAINED AUSTENITE; TRANSFORMATION-INDUCED PLASTICITY (TRIP); ULTRA HIGH-STRENGTH STEEL; WARM FORMING;

STAINLESS STEEL;

EID: 9144259689     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.44.1608     Document Type: Article

References (22)

1. V. F. Zackay, E. R. Parker, D. Fahr and R. Bush: Trans. Am. Soc. Met., 60 (1967), 252.
2. K. Sugimoto, M. Kobayashi and S. Hashimoto: Metall. Trans. A, 23A (1992), 3085.
3. K. Sugimoto, M. Kobayashi A. Nagasaka and S. Hashimoto: ISIJ Int., 35 (1995), 1407.
4. S. Hiwatashi, M. Takahashi, T. Katayama and M. Usuda: J. Jpn. Soc. Technol. Plast., 35 (1994), 1109.
5. O. Matsumura, Y. Sakuma, Y. Ishii and J. Zhao: ISIJ Int., 32 (1992), 1110.
6. Y. Hirose, S. Nakai, H. Furuyama, S. Sudoh and K. Ueno: J. Jpn. Soc. Technol. Plast., 35 (1994), 1071.
7. A. Nagasaka, K. Sugimoto, M. Kobayashi and S. Hashimoto: Tetsu-to-Hagané 83 (1997), 335.
8. Z. Hanzaki, P. D. Hodgson and S. Yue: ISIJ Int., 35 (1995), 79.
9. P. Jacqes, K. Eberle, P. Harlet and F. Delannay: Proc. 40th Mech. Work. Steel Processing Conf., ISS, Warrendale, PA, (1998), 239.
10. K. Sugimoto, T. Iida, J. Sakaguchi and T. Kashima: ISIJ Int., 40 (2000), 902.
11. K. Sugimoto, J. Sakaguchi, T. Iida and T. Kashima: ISIJ Int., 40 (2000), 920.
12. K. Sugimoto, M. Kobayashi, K. Inoue and Y. Masuda: Tetsu-to- Hagané, 85 (1999), 856.
13. S. Song, K. Sugimoto, M. Kobayashi, H. Matsubara and T. Kashima: Tetsu-to-Hagané, 86 (2000), 563.
14. K. Sugimoto, A. Kanda, R. Kikuchi, S. Hashimoto, T. Kashima and S. Ikeda: ISIJ Int., 42 (2002), 910.
15. K. Sugimoto, K. Nakano, S. Song and T. Kashima: ISIJ Int., 42 (2002), 450.
16. K. Shinoda and T. Yamada: J. Jpn. Soc. Heat Treat., 20 (1980), 326.
17. W. Steven and A. G. Haynes: J. Iron Steel Inst., 183 (1956), 349.
18. H. Maruyama: J. Jpn. Soc. Heat Treat., 17 (1977), 198.
19. D. J. Dyson and B. Holmes: J Iron Steel Inst., 208 (1970), 469.
20. K. Sugimoto, N. Usui, M. Kobayashi and S. Hashimoto: ISIJ Int., 32 (1992), 1311.
21. M. Takahashi and H. K. D. Bhadeshia: Mater. Trans., JIM, 32 (1991), 689.
22. B. Sundman, B. Janssen and J. O. Andersson: Calphad, 9 (1985), 153.