Retained austenite characteristics and tensile properties in a TRIP type bainitic sheet steel

ISIJ International

Volumn 40, Issue 9, 2000, Pages 902-908

  Sugimoto, Koh Ichi ^a   Iida, Tsutomu ^a   Sakaguchi, Jyunya ^a   Kashima, Takahiro ^b  

^a SHINSHU UNIVERSITY   (Japan)

^b KOBE STEEL LTD   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

AUSTENITE; BAINITIC TRANSFORMATIONS; DUCTILITY; MARTENSITE; PLASTICITY; RESIDUAL STRESSES; TENSILE STRENGTH;

RETAINED AUSTENITE CHARACTERISTICS; TRANSFORMATION INDUCED PLASTICITY (TRIP);

STEEL SHEET;

EID: 0033658663     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.40.902     Document Type: Article

References (29)

1. V. F. Zackay, E. R. Parker, D. Fahr and R. Bush: Trans. Am. Soc. Met., 60 (1967), 252.
2. K. Sugimoto, M. Kobayashi and S. Hashimoto: Metall. Trans., 23A (1992), 3085.
3. K. Sugimoto, N. Usui, M. Kobayashi and S. Hashimoto: ISIJ Int., 32 (1992), 1311.
4. K. Sugimoto, M. Kobayashi, S. Yasuki and S. Hashimoto: Mater Trans. JIM, 36 (1995), 632.
5. K. Sugimoto, A. Nagasaka, M. Kobayashi and S. Hashimoto: ISIJ Int., 35 (1995), 1407.
6. Y. Hirose, S. Nakai, H. Fukuyama, S. Sudoh and K. Ueno: J. Jpn. Soc. Technol. Plast., 35 (1994), 1071.
7. S. Hiwatashi, M. Takahashi, T. Katayama and M. Usuda: J. Jpn. Soc. Technol. Plast., 35 (1994), 1109.
8. K. Sugimoto, X. Sun, M. Kobayashi, T. Haga and H. Shirasawa: Trans. Jpn. Soc. Mech. Eng., 60A (1997), 717.
9. Y. Ojima, Y. Shiroi, Y. Taniguchi and K. Kato: SAE Tech. Paper Series, 980954, (1998), 39.
10. H. K. D. H. Bhadeshia and D. V Edmonds: Met. Sci., 17 (1983), 411.
11. H. K. D. H. Bhadeshia and D. V. Edmonds: Met. Sci., 17 (1983), 420.
12. V. T. T. Miihkinen and D. V. Edmonds: Mater. Sci. Technol., 3 (1987), 422.
13. K. Tsuzaki, A. Kodai and T. Maki: Metall. Mater. Trans. A, 25A (1994), 2009.
14. K. Shinoda and T. Yamada: J. Jpn. Soc. Heat Treat., 20 (1980), 326.
15. W. Steven and A. G. Haynes: J. Iron Steel Inst., 183 (1956), 349.
16. H. Maruyama: J. Jpn. Soc. Heat Treat., 17 (1977), 198.
17. S. Bandoh, O. Matsumura and Y. Sakuma: Trans. Iron Steel Inst. Jpn., 28 (1988), 569.
18. Soc. Mat. Sci. Jpn., Standard Measurement Method of X-Ray Stress, (1977).
19. K. Amano and T. Araki: Atlas for Bainitic Microstructures, Vol. 1, ISIJ Tokyo, (1992), 21.
20. M. Takahashi and H. K. D. Bhadeshia: Mater. Trans. JIM, 32 (1991), 689.
21. S. V. Radcliffe and M. Schatz: Acta Metall., 10 (1962), 201.
22. K. Sugimoto, M. Kobayashi and S. Yasuki: Metall. Mater. Trans. A, 28A (1997), 2637.
23. Y. W. Chang and R. J. Asaro: Met. Sci., 12 (1978), 277.
24. Y. Tomota and I. Tamura: Tetsu-to-Hagané, 68 (1982), 1147.
25. T. Mura and T. Mori: Micromechanics, Baifu-kan, Tokyo, (1976).
26. J. D. Eshelby: Proc. R. Soc., Ser. A, A241 (1957), 376.
27. M. F. Ashby: Philos. Mag., 14 (1966), 1157.
28. K. Sugimoto, M. Kobayashi, H. Matsushima and S. Hashimoto: Trans. Jpn. Soc. Mech. Eng., 61A (1995), 80.
29. R. W. K. Honeycombe and F. B. Pickering: Metall. Trans., 3 (1972), 1099.