The Elements of Polymer Science and Engineering

The Elements of Polymer Science and Engineering, Third Edition

Volumn , Issue , 2012, Pages 1-563

  Rudi, Alfred ^a   Cho, Phillip ^b  

^a UNIVERSITY OF WATERLOO   (Canada)

^b UNIVERSITY OF ALBERTA   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85147078805     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/C2009-1-64286-6     Document Type: Book

References (268)

1. P.J. Flory (1953) Principles of Polymer Chemistry Ithaca, NY: Cornell University Press
2. J.A. Brydson (1999) Plastic Materials seventh ed. London: Butterworths
3. H.F. Mark (1967) Am. Sci. 55 265.
4. W.V. Metanomski (Eds) (1991) Compendium of Macromolecular Nomenclature Oxford, UK: Blackwell Scientific Publications
5. W. Ring, I. Mita, A.D. Jenkins, M. Bikales, “Source-Based Nomenclature for Copolymers, ” Pure Appl. Chem. 57, 1427 (1985).
6. IUPAC Macromol (1994) Chem. Div. (IV), Commission on Macromol. Nomenclature. Polym. Bull. 32 125.
7. J.C. Randall (1977) Polymer Sequence Determination New York: Academic Press
8. T. Radiotis and G.R. Brown (Eds) (1995) J. Chem. 72
9. W.L. Mattice and U.W. Suter (1994) Conformational Theory of Large Molecules: The Rotational Isomeric State Model in Macromolecular Systems New York: Wiley Interscience
10. W. Kuhn (1936) Kolloid-Z. 76 258. 87 (1939) 3
11. G. Herdan (1960) Small Particle Statistics: An Account of Statistical Methods for the Investigation of Finely Divided Materials second ed. London: Academic Press (p. 281)
12. S.I. Sandler (2006) Chemical, Biochemical, and Engineering Thermodynamics fourth ed. New York: Wiley
13. H. Benoit and D. Froelich (1972) M.B. Huglin (Eds) Light Scattering from Polymer Solutions New York: Academic Press
14. T.C. Chau and A. Rudin (1974) Polymer (London) 15 593.
15. C. Tanford (1961) Physical Chemistry of Macromolecules New York: Wiley
16. P.J. Flory and T.G. Fox (1951) J. Am. Chem. Soc. 73 1904.
17. C.M. Kok and A. Rudin (1981) Makromol. Chem. Rapid Commun. 2 655.
18. P.J. Flory and W.R. Krigbaum (1956) J. Chem. Phys. 18 1806.
19. D.K. Carpenter and L. Westerman (1975) P.E. Slade, Jr. (Eds) Polymer Molecular Weights New York: Dekker (Part II.)
20. M.L. Huggins (1942) J. Am. Chem. Soc. 64 2716.
21. E.O. Kraemer (1938) Ind. Eng. Chem. 30 1200.
22. A. Rudin, G.B. Strathdee and W.B. Edey (1973) J. Appl. Polym. Sci. 17 3085.
23. O.F. Solomon and I.Z. Ciuta (1962) J. Appl. Polym. Sci. 6 683.
24. O.F. Solomon and B.S. Gotesman (1967) Makromol. Chem. 104 177.
25. A. Rudin and R.A. Wagner (1975) J. Appl. Polym. Sci. 19 3361.
26. M.L. Higgins and J.J. Hermans (1952) J. Polym. Sci. 8 257.
27. J.C. Moore (1964) J. Polym. Sci. Part A 2 835.
28. L.H. Tung (1966) J. Appl. Polym. Sci. 10 375.
29. J.H. Duerksen (1970) Sep. Sci. 5 317.
30. N. Friis and A.E. Hamielec (1975) Adv. Chromatogr. 13 41.
31. Z. Grubisic, P. Rempp and H. Benoit (1967) J. Polym. Sci. Part B 5 753.
32. H.K. Mahabadi and A. Rudin (1979) Polym. J. 11 123.
33. A. Rudin and H.L.W. Hoegy (1972) J. Polym. Sci. Part A-1 10 217.
34. A.R. Weiss and E. Cohn-Ginsberg (1969) J. Polym. Sci. Part B 7 379.
35. C.J.B. Dobbin, A. Rudin and M.F. Tchir (1980) J. Appl. Polym. Sci. 25 2985. (ibid. 27, 1081 (1982))
36. A. Rudin, G.W. Bennett and J.R. McLaren (1969) J. Appl. Polym. Sci. 13 2371.
37. M.G. Pigeon and A. Rudin (1992) J. Appl. Polym. Sci. 46 763.
38. R. Amin Senayei, K. Suddaby and A. Rudin (1993) Makromol. Chem.
39. M.G. Pigeon and A. Rudin (1994) J. Appl. Polym. Sci. 51 303.
40. H.S. Creel (1993) Trends Polym. Sci. 1 336.
41. B. Thomson, K. Suddaby, A. Rudin and G. Lajoie (1996) Eur. Polym. J. 32 239.
42. M.K. Mishra and R.G. Saxton (1995) Chemtech 35
43. G. Woods (1990) The ICI Polyurethanes Book second ed. New York: Wiley
44. T. Bremner and A. Rudin (1992) J. Polym. Sci., Phys. Ed. 30 1247.
45. T.A. Kavassalis and P.R. Sundararajan (1993) Macromolecules 26 4146.
46. V.P. Privalko and Y.S. Lipatov (1974) Makromol. Chem. 175 641.
47. M. Gordon (1963) High Polymers Reading, MA: Addison-Wesley
48. H. Mark, ChemTech, 220 (April 1984).
49. L.R.G. Treloar (1975) The Physics of Rubber Elasticity third ed. London and New York: Oxford (Clarendon) University Press
50. M.L. Williams, R.F. Landel and J.D. Ferry (1955) J. Am. Chem. Soc. 77 3701.
51. K.H. Illers and H. Breuer (1961) Kolloid. Z. 17b 110.
52. A.M. Donald and E.J. Kramer (1982) J. Polym. Sci., Polym. Phys. Ed. 20 899.
53. S. Hashemi and J.G. Williams (1986) Polym., Eng. Sci. 16 760.
54. A.C. Yang and E.J. Kramer (1986) Macromolecules 19 2010.
55. B.Z. Jang, D.R. Uhlmann and J.B. Vander Sande (1984) J. Appl. Polym. Sci. 29 3409.
56. K.C.E. Lee, Ph.D. Thesis, University of Waterloo, 1995.
57. L. Morbitzer (1976) J. Appl. Polym. Sci. 20 2691.
58. A.E. Griffith (1921) Phil. Trans. Roy. Soc. A221 163.
59. G.R. Irwin, in Fracturing of Metals, p. 147. American Society of Metals, Cleveland, 1948.
60. ASTM Standard E399. American Society for Testing Materials, Philadelphia, D.P. Rooke, D.J. Cartwright, Compendium of Stress Intensity Factors, HMSO, London, 1976.
61. E. Plati and J. Williams (1975) Polym. Eng. Sci. 15 470.
62. R.W. Truss (1988) Plast. Rubber Process. Appl. 10 1.
63. N.G. McCrum, C.P. Buckley and C.B. Bucknall (1990) Principles of Polymer Engineering Oxford: Oxford University Press
64. S. Turner and G. Dean (1990) Plast. Rubber Process. Appl. 14 137.
65. D.R. Moore (1985) Polymer Testing 5 255.
66. R.M. Criens and H.G. Mosle (1982) Soc. Plast. Eng. Antec. 40 22.
67. E.B. Bagley (1957) J. Appl. Phys. 28 624.
68. B. Rabinowitsch (1929) Z. Physik. Chem. A145 1.
69. T. Bremner, D.G. Cook and A. Rudin (1990) J. Appl. Poly. Sci. 41 1617. 43, 1773 (1991)
70. E.B. Bagley and H.P. Schreiber (1969) F.R. Eirich (Ed.) Rheology Vol. 5 New York: Academic Press
71. F.N. Cogswell (1997) Polymer Melt Rheology Cambridge, England: Woodhead Publishing
72. J.M. Dealy (1982) Rheometers for Molten Plastics New York: Van Nostrand Reinhold
73. J.M. Dealy and K.F. Wissbrun (1990) Melt Rheology and Its Role in Plastics Processing New York: Van Nostrand Reinhold
74. G. Scatchard (1931) Chem. Rev. 8 321.
75. J.H. Hildebrand, J.M. Prausnitz and R.L. Scott (1970) Regular and Related Solutions New York: Van Nostrand Reinhold
76. P.A. Small (1953) J. Appl. Chem. 3 71.
77. K.L. Hoy (1970) J. Paint Technol. 42(541), 76.
78. S. Krause (1972) J. Macromol. Sci. Macromol. Rev. C7 251.
79. E.A. Grulke (1989) J. Brandrup, E. Immergut (Eds) Polymer Handbook third ed. New York: Wiley VII/519.
80. A. Beerbrower, L.A. Kaye and D.A. Pattison (December 18, 1967) Chem. Eng. 118.
81. P.J. Flory (1941) J. Chem. Phys. 9 660. 10, 51 (1942)
82. M.L. Huggins (1941) J. Chem. Phys. 9 440. Ann. N.Y. Acad. Sci. 43, 1 (1942)
83. C.M. Hansen (1967) J. Paint Technol. 39 104. 511
84. C.M. Hansen (1969) Ind. Eng. Chem. Prod. Res. Dev. 8 2.
85. P. Choi, T.A. Kavassalis and A. Rudin (1994) IEC Res. 33 3154.
86. P. Choi, T.A. Kavassalis and A. Rudin (1996) J. Coll. Interf. Sci. 180 1.
87. J.P. Teas (1968) J. Paint Technol. 40 519.
88. P.J. Flory (1953) Principles of Polymer Chemistry Ithaca, NY: Cornell University Press
89. L.H. Tung (Eds) (1977) Fractionation of Synthetic Polymers New York: Dekker
90. E. Karbashewski, L. Kale, A. Rudin, H.P. Schreiber and W.J. Tchir (1991) Polym. Eng. Sci. 31 1581.
91. M.G. Pigeon and S. Rudin (1994) J. Appl. Polym. Sci. 51 303.
92. A. Rudin (1980) J. Macromol. Sci. Rev. C19 267.
93. D.R. Paul and C.B. Bucknall (Eds) (2000) Polymer Blends New York: Wiley Interscience
94. J.T. Bergen (1967) F.R. Eirich (Eds) Rheology vol. 4 New York: Academic Press
95. W.D. Mohr (1959) E.C. Bernhardt (Eds) Processing of Thermoplastic Materials New York: Van Nostrand Reinhold
96. D.G. Baird and D.I. Collias (1998) Polymer Processing: Principles and Design New York: Wiley (Interscience)
97. P. Choi, H.P. Blom, T.A. Kavassalis and A. Rudin (1995) Macromolecules 28 8247.
98. P. Choi (2000) Polymer 41 8741.
99. J.Z. Fan, M.C. Williams and P. Choi (2002) Polymer 43 1497.
100. G.H. Fredrickson, A.J. Liu and F.S. Bates (1994) Macromolecules 27 2503.
101. H.W. Starkweather Jr. (1980) J. Appl. Polym. Sci. 20 364.
102. E. Nolley, J.W. Barlow and D.R. Paul (1980) Polym. Eng. Sci. 25 139.
103. A. Rudin, D.A. Loucks and J.M. Goldwasser (1980) Polym. Eng. Sci. 74 741.
104. C.M. Robeson and J.E. McGrath (1977) Polym. Eng. Sci. 17 300.
105. M. Morton (1969) Am. Chem. Soc. Polym. Div. Preprints 10(2), 512.
106. A.R. Shultz and B.M. Beach (1977) J. Appl. Polym. Sci. 21 2305.
107. G. Kraus and K.W. Rollman (1976) J. Polym. Sci. Phys. Ed. 14 1133.
108. A. Usuki, M. Kawasumi, Y. Kojima, A. Okada, T. Kurauchi and O. Kamigaito (1993) J. Mater. Res. 8 1174.
109. A. Usuki, Y. Kojima, M. Kawasumi, A. Okada, Y. Fukushima, T. Kurauchi, et al. (1993) J. Mater. Res. 8 1179.
110. Y. Kojima, A. Usuki, M. Kawasumi, A. Okada, Y. Fukushima, T. Kurauchi, et al. (1993) J. Mater. Res. 8 1185.
111. C.M. Chan, J. Wu, J.X. Li and Y.K. Cheung (2002) Polymer 43 2981.
112. O. Becker, R. Varley and G. Simon (2002) Polymer 43 4365.
113. J.H. Park and S.C. Jana (2003) Polymer 44 2091.
114. D. Qian, E.C. Dickey, R. Andrews and T. Rantell (2000) Appl. Phys. Letters 76 2868.
115. M. Cadek, J.N. Coleman, V. Barron, K. Hedicke and W.J. Blau (2002) Appl. Phys. Letters 81 5123.
116. R. Huang (1991) Pre-evaporation Membrane Separation Processes The Netherlands: Elsevier
117. S. Paul (Eds) (1995) Surface Coatings second ed. New York: John Wiley & Sons
118. J.A. Biesenberger (Eds) (1983) Devolatilization of Polymers Munich: Hanser
119. B. Jeong, Y.H. Bae, B.S. Lee and S.W. Kim (1997) Biodegradable block copolymers as injectable drug-delivery systems. Nature 388 860-862.
120. J. Lange and Y. Wyser (2003) Recent innovations in barrier technologies for plastic packaging—a review. Packag. Technol. Sci. 16 149-158.
121. J. Crank and G.S. Park (Eds) (1968) Diffusion in Polymers London: Academic Press
122. M. Doi and S.F. Edwards (1986) The Theory of Polymer Dynamics Oxford: Oxford University Press
123. J. Crank (1975) The Mathematics of Diffusion New York: Oxford University Press
124. L.S. Darken (1948) Diffusion, mobility and their interrelation through free energy in binary metallic systems. Metals Tech. 184-194.
125. P.F. Green (2005) Kinetics, Transport, and Structure in Hard and Soft Materials New York: CRC Press
126. P. Neogi (1996) Diffusion in Polymers New York: Marcel Dekker
127. G.S. Hartley and J. Crank (1949) Some fundamental definitions and concepts in diffusion processes. Trans. Faraday Soc. 801-818.
128. W. Ebeling, E.G. Nowak and I.M. Sokolov (2008) On stochastic dynamics in physics: remarks on history and terminology. Acta Physica Polonica B 1003-1018.
129. M.A. Islam (2004) Einstein–Smoluchowski diffusion equation: a discussion. Physica Scripta 70(2–3), 120-125.
130. T. Engel and P. Reid (2010) Thermodynamics, Statistical Thermodynamics, & Kinetics New York: Prentice Hall
131. M. Doi (1995) Introduction to Polymer Physics New York: Oxford University Press
132. I. Teraoka (2002) Polymer Solutions: An Introduction to Physical Properties New York: John Wiley & Sons Inc.
133. S. Glasstone, K.J. Laidler and H. Eyring (1941) The Theory of Rate Processes New York: McGraw-Hill
134. M.H. Cohen and D. Turnbull (1959) Molecular transport in liquids and glasses. J. Chem. Phys. 1164-1169.
135. J.S. Kim and K.R. Lee (2000) Prediction of mutual diffusion coefficient in polymer solution. Polymer 8441-8448.
136. W.H. Carothers (1929) J. Am. Chem. Soc. 51 2548.
137. P.J. Flory (1953) Principles of Polymer Chemistry Ithaca, NY: Cornell University Press
138. R.W. Lenz (1967) Organic Chemistry of Synthetic High Polymers New York: Wiley (Interscience)
139. P.W. Morgan and S.L. Kwolek (1964) J. Polym. Sci. Part A 2 181.
140. N.C. Billingham and A.D. Jenkins (1972) A.D. Jenkins (Eds) Polymer Science vol. 1 New York: American Elsevier
141. This is strictly true only for nonbranched chain reactions like polymerizations. In branching chain reactions, the number of active sites may increase during a propagation step. An example is H+O2→HO·+O· in hydrogen–oxygen flames. Such reactions could not be employed in a controllable polymerization and need not be considered here.
142. C.S. Sheppard (1987) Encycl. Polym. Sci. Technol. 11 1.
143. A.V. Tobolsky, C.E. Rogers and R.D. Brickman (1960) J. Am. Chem. Soc. 82 1277.
144. S.C. Ng and K.K. Chee (1982) J. Polym. Sci., Polym. Chem. Ed. 20 409.
145. B. Baysal and A.V. Tobolsky (1952) J. Polym. Sci. 8 529.
146. R.A. Gregg and F.R. Mayo (1947) Discuss. Faraday Soc. 2 328.
147. J. Brandrup and E. Immergut (Eds) (1989) Polymer Handbook third ed. New York: Wiley (Interscience)
148. N. Bauer and S.Z. Lewin (1971) A Weissberger, B.W. Rossiter (Eds) Techniques of Chemistry vol. 1 New York: third ed., Wiley (Interscience) (Part 4)
149. A. Rudin and S.S.M. Chiang (1974) J. Polym. Sci. Chem. Ed. 12 2235.
150. M. Buback, R.G. Gilbert, G.T. Russell, D.J.T. Hill, G. Moad, K.F. O’Driscoll, J. Shen and M.A. Winnik (1992) J. Polym. Sci., Pt. A: Polym. Chem. 30 851.
151. O.F. Olaj, I. Bitai and F. Hinkelmann (1987) Makromol. Chem. 14 1689.
152. K.F. O’Driscoll and M.E. Kuindersma (1994) Macromol. Theory Simul. 3 469.
153. T.G. Carswell, D.J.T. Hill, D.S. Hunter, P.J. Pomery, J.H. O’Donnell and C.L. Winzor (1990) Eur. Polym. J. 26 541.
154. H.K. Mahabadi and K.F. O’Driscoll (1977) Macromolecules 10 55.
155. H.K. Mahabadi and A. Rudin (1979) J. Polym. Sci. Chem. Ed. 17 1801.
156. G.V. Schulz and G. Haborth (1948) Makromol. Chem. 1 106.
157. W.B. Smith, J.A. May and C.W. Kim (1966) J. Polym. Sci. Part A 2(4), 365.
158. P.J. Flory (1953) Principles of Polymer Chemistry Ithaca, NY: Cornell University Press
159. M.K. Georges, R.P. Veregin, P.M. Kazmaier and G.K. Hamer (1994) Trends Polym. Sci. 2 66.
160. D. Greszta, D. Madare and K. Matyjaszewski (1994) Macromolecules 27 638.
161. P. Ehrilich and G.A. Mortimer (1970) Adv. Polym. Sci. 7 386.
162. F.S. Dainton and K.J. Ivin (1958) Quart. Rev. (London) 12 61.
163. F.R. Mayo and F.M. Lewis Jr. (1944) J. Am. Chem. Soc. 66 1594.
164. T. Alfrey Jr. and G. Goldfinger (1944) J. Chem. Phys. 12 322.
165. R.K. Kruse (1967) J. Polym. Sci. Part B 5 437.
166. R.M. Joshi (1973) J. Macromol. Sci. Chem. A7 1231.
167. A. Rudin, S.S.M. Chiang, H.K. Johnston and P.D. Paulin (1972) Can. J. Chem. 50 1757.
168. M. Fineman and S.D. Ross (1950) J. Polym. Sci. 5 259.
169. P.W. Tidwell and G.A. Mortimer (1970) J. Macromol. Sci.-Rev. C4 281.
170. A.I. Yezreelev, E.L. Brokhina and Y.S. Roskin (1969) Polym. Sci. (USSR) 11 1894.
171. T. Kelen and F. Tudos (1975) J. Macromol. Sci.-Chem. A9 1.
172. H.K. Johnston and A. Rudin (1970) J. Paint Technol. 42(547), 429.
173. D. Braun, W. Brendlein and G. Mott (1973) Eur. Polym. J. 9 1007.
174. R.C. McFarlane, P.M. Reilly and K.F. O’Driscoll (1980) J. Polym. Sci. Chem. Ed. 18 251.
175. P.W. Tidwell and G.A. Mortimer (1965) J. Polym. Sci. Part A 3 369.
176. K.F. O’Driscoll and P.M. Reilly (1987) Makromol. Chem. Macromol. Symp. 10/11 355.
177. P.J. Rossignoli and T.A. Duever (1995) Polym. React. Eng. 3 361.
178. C. Walling and E.R. Briggs (1945) J. Am. Chem. Soc. 67 1774.
179. L. Crescentini, G.B. Gechele and A. Zanella (1965) J. Appl. Polym. Sci. 9 1323.
180. T.A. Duever, K.F. O’Driscoll and P.M. Reilly (1983) J. Polym. Sci. Polym. Chem. Ed. 21 2003.
181. A. Rudin, K.F. O’Driscoll and M.S. Rumack (1981) Polymer 22 740.
182. C. Tosi (1968) Adv. Polym. Sci. 5 451.
183. W.H. Stockmayer (1945) J. Chem. Phys. 13 199.
184. P.J. Flory (1953) Principles of Polymer Chemistry Ithaca, NY: Cornell University Press
185. C.D. Frick, A. Rudin and R.H. Wiley (1981) J. Macromol. Sci. Chem. A 16 1275.
186. J.M. Tedder (1974) A.D. Jenkins, A. Ledwith (Eds) Reactivity, Mechanism and Structure in Polymer Chemistry New York: Wiley
187. T. Alfrey Jr. and C.C. Price (1947) J. Polym. Sci. 2 101.
188. R.Z. Greenley, pII/267 in: J. Brandrup, E.H. Immergut (Eds.), in Polymer Handbook, third ed., John Wiley and Sons, New York, 1989.
189. C.H. Bamford and A.D. Jenkins (1963) Trans. Faraday Soc. 59 530.
190. K.F. O’Driscoll (1969) J. Macromol. Sci. Chem. A3 307.
191. H.J. Harwood (1987) Makromol. Chem. Macromol. Symp. 10/11 331.
192. M. Hirooka, H. Yobiuchi, S. Kawasumi and K. Nakaguchi (1973) J. Polym. Sci. Part A 1(11), 128.
193. K. Barrett (Ed.) (1975) Dispersion Polymerization in Organic Media New York: Wiley
194. A.J. Paine (1990) Macromolecules 23 3109. J. Coll. Interf. Sci.138, 157 (1990)
195. B. Thomson, A. Rudin and G. Lajoie (1995) J. Appl. Polym. Sci. 33 345.
196. R.G. Gilbert (1995) Emulsion Polymerization San Diego, CA: Academic Press
197. W.D. Harkins (1945) J. Chem. Phys. 13 381. ;14, 47 (1946); J. Am. Chem. Soc. 69, 1428 (1947)
198. W.V. Smith and R.H. Ewart (1948) J. Chem. Phys. 16 592.
199. J.L. Gardon (1970) Rubber Chem. Technol. 43 74.
200. Z. Wang, A.J. Paine and A. Rudin (1995) J. Polym. Sci. Part A: Polym. Chem. 33 1597.
201. B. Thomson, Z. Wang, A.J. Paine and A. Rudin (1995) J. Polym. Sci. Part A: Polym. Chem. 33 2297.
202. I.A. Maxwell, B.R. Morrison, R.G. Gilbert, D.F. Sangster and D.H. Napper (1992) Makromol. Chem. Macromol. Symp. 53 233.
203. F.K. Hansen and J. Ugelstad (1978) J. Polym. Sci. Part A Polym. Chem. 16 1953.
204. R.M. Fitch and C.H. Tsai (1971) R.M. Fitch (Ed.) Polymer Colloids New York: Plenum
205. J.W. Goodwin, J. Hearn, C.C. Ho and R.H. Ottewill (1973) Brit. Polym. J. 5 347.
206. P.J. Feeney, D.H. Napper and R.G. Gilbert (1987) Macromolecules 20 2922.
207. Z. Song and G.W. Poehlein (1990) J. Polym. Sci. Part A Polym. Chem. 28 2359.
208. J.W. Vanderhoff (1985) J. Polym. Sci. Polym. Symp. 72 161.
209. A. Rudin (1995) Makromol. Chem. Macromol. Symp. 92 53.
210. N. Sutterlin (1985) Makromol. Chem. Suppl. 10/11 403.
211. D. Sundberg, B. Kronberg and J. Berg (1989) J. Microencap. 6 327.
212. Y.C. Chen, V. Dimonie and M.S. El-Aasser (1991) J. Appl. Polym. Sci. 42 1049.
213. J.A. Waters, European Patent Application, EP 327 199 (1989).
214. M.S. Silverstein, Y. Talmon and M. Narkis (1980) Polymer (London) 30 416.
215. J.C. Daniel (1985) Makromol. Chem. Suppl. 10/11(359)
216. D.I. Lee and T. Ishikawa (1983) J. Polym. Sci. Part A Polym. Chem. 21 147.
217. W.C. Griffen (1949) J. Soc. Cosmetic Chemists. 1 311.
218. McCutcheon’s Emulsifiers and Detergents, vol. 1, M.C. Publishing Co., Glen Rock, NJ.
219. A.J. Paine, K.J. O’Callaghan, A. Rudin, US Patent 5, 455, 315 (1995).
220. G.A. Vandezande and A. Rudin (1994) J. Coat. Technol. 66(828), 99.
221. D.G. Cook, A. Plumtree and A. Rudin (1993) J. Appl. Polym. Sci. 48 75.
222. M. Szwarc (Ed.) (1974) Ions and Ion Pairs in Organic Reactions New York: Wiley
223. J.P. Kennedy (1975) Cationic Polymerization of Olefins New York: Wiley (Interscience)
224. A. Ledwith and D.C. Sherrington (1976) C.H. Bamford, C.F.H. Tipper (Eds) Comprehensive Chemical Kinetics vol. 15 Amsterdam: Elsevier (Chap. 2)
225. J.T. Dennison and J.B. Ramsey (1955) J. Am. Chem. Soc. 77 2615.
226. F. Buckley and A.A. Maryott (1954) J. Res. Nat. Bur. Std. 53 229.
227. S. Pasynkiewicz (1990) Polyhedron 9 429.
228. M. Sawamoto (1971) Prog. Polym. Sci. 16 111.
229. T. Higashimura, S. Aoshima and M. Sawamoto (1988) Makromol. Chem. Macromol. Symp. 13/14 457.
230. G. Kaszas, J. Puskas and J.P. Kennedy (1988) Makromol. Chem. Macromol. Symp. 13/14 473.
231. P. Cossee (1964) J. Catal. 3 80.
232. E.J. Arlman and P. Cossee (1964) J. Catal. 3 99.
233. E. Karbashewski, A. Rudin, L. Kale, W.J. Tchir and H.P. Schreiber (1991) Polymer Eng. Sci. 31 1581.
234. J.A. Ewen (1984) J. Am. Chem. Soc. 106 6355.
235. W. Kaminsky and R. Steiger (1988) Polyhedron 7 2375.
236. H. Sinn, W. Kaminsky, H.J. Vollmer and R. Woldt (1980) Angew. Chem. Int. Ed. Engl. Ed. 19 390.
237. P.J. Hoftyzer (1975) Appl. Polym. Symp. 26 349.
238. J.P.A. Wallis, R.A. Ritter and H. Andre (1975) AIChE J. 21 691.
239. O. Levenspiel (1962) Chemical Reaction Engineering New York: Wiley
240. E. Richards, Degradable Plastics. Secretariat of the Pacific Regional Environment Programme. 2009, p. 36.
241. M. Ramirez-Alvarado, J.W. Kelly, C.M. Dobson, eds. Protein Misfolding Diseases: Current and Emerging Principles and Therapies. Wiley Series in Protein and Peptide Science, ed. V.N. Uversky, John Wiley & Sons, 2010
242. H. Robert Horton (Eds) (2006) Principles of Biochemistry Pearson: Prentice Hall
243. L.P.B.M Janssen and L. Moscicki (2009) Thermoplastic Starch: A Green Material for Various Industries Wiley-VCH
244. M.P. Stevens (1999) Polymer Chemistry: An Introduction third ed. New York: Oxford (551)
245. Government of Canada, Biopolymers and Bioplastics, 2002.
246. A. Ciesielski (1999) An Introduction to Rubber Technology Smithers Rapra Technology
247. J.G. Smith (2006) Organic Chemistry vol. 1 New York: McGraw Hill
248. J. BeMiller, R. Whistler (Eds.), Starch: Chemistry and Technology, third ed., Food Science and Technology International Series, ed. S.L. Taylor. Elsevier, 2009.
249. M.J. John and R.D. Anandjiwala (2008) Recent developments in chemical modification and characterization of natural fiber-reinforced composites. Polym. Compos. 29(2), 187-207.
250. N. Reddy and Y. Yang (2005) Biofibers from agricultural byproducts for industrial applications. Trends Biotechnol. 23(1), 22-27.
251. X. Lu, et al. (2004) Environmental degradability of self-reinforced composites made from sisal. Compos. Sci. Technol. 64(9), 1301-1310.
252. F.T. Wallenberger and N. Weston (Eds) (2004) Natural Fibers, Plastics, and Composites Boston: Kluwer Academic Publishers
253. L.T. Lim, R. Auras and M. Rubino (2008) Processing technologies for poly(lactic acid). Prog. Polym. Sci. 33(8), 820-852.
254. M. Mondragon, K. Arroyo and J. Romero-Garcia (2008) Biocomposites of thermoplastic starch with surfactant. Carbohydr. Polym. 74(2), 201-208.
255. A.J.F. Carvalho (2008) Starch: Major Sources, Properties and Applications as Thermoplastic Materials. M.N. Belgacem, A. Gandini (Eds) Monomers, Polymers and Composites from Renewable Resources Elsevier 312-342.
256. Y. Xia and R.C. Larock (2010) Vegetable oil-based polymeric materials: synthesis, properties, and applications. Green Chem. 12(11), 1893-1909.
257. K. Madhavan Nampoothiri, N.R. Nair, R.P. John, An overview of the recent developments in polylactide (PLA) research. Bioresour. Technol. 101(22): p. 8493–8501.
258. A. Jarerat, Y. Tokiwa and H. Tanaka (2006) Production of poly(L-lactide)-degrading enzyme by Amycolatopsis orientalis for biological recycling of poly(L-lactide). Appl. Microbiol. Biotechnol. 72(4), 726-731.
259. Y. Tokiwa and A. Jarerat (2005) Accelerated microbial degradation of poly(L-lactide) Weinheim, Germany: Wiley-VCH
260. G.-Q. Chen (2009) A microbial polyhydroxyalkanoates (PHA) based bio- and materials industry. Chem. Soc. Rev. 38(8), 2434-2446.
261. J. Rincones, et al. (2009) The Golden Bridge for Nature: The New Biology Applied to Bioplastics. Polym. Rev. 49(2), 85-106.
262. J. Bootle, F. Burzesi and L. Fiorini (2001) Design Guidelines. ASM Handbook: Composites ASM International (p. 1201)
263. B.D. Agarwal, L.J. Broutman and K. Chandrashekhara (Eds) (2006) Analysis and Performance of Fiber Composites third ed. New Jersey: John Wiley & Sons Inc
264. M.J. John and S. Thomas (2008) Biofibres and biocomposites. Carbohydr. Polym. 71(3), 343-364.
265. R. Iovino, et al. (2008) Biodegradation of poly(lactic acid)/starch/coir biocomposites under controlled composting conditions. Polym. Degrad. Stab. 93(1), 147-157.
266. A.K. Mohanty, M. Misra and L.T. Drzal (2001) Surface modifications of natural fibers and performance of the resulting biocomposites: An overview. Compos. Interfaces 8(5), 313-343.
267. A.A. Ansari (2011) Eutrophication: causes, consequences and control New York: Springer
268. A.U.B. Queiroz and F.P. Collares-Queiroz (2009) Innovation and Industrial Trends in Bioplastics. Polym. Rev. 49(2), 65-78.