Fieldbus Systems: Embedded Networks for Automation

Networked Embedded Systems

Volumn , Issue , 2017, Pages 20-1-20-64

  Sauter, Thilo ^a  

^a ERICH SCHMID INSTITUTE OF MATERIALS SCIENCE   (Austria)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85137466250     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9781439807620-20     Document Type: Chapter

References (142)

1. International Electrotechnical Commission, IEC 61158, Digital data communications for measurement and control-Fieldbus for use in industrial control systems, 2003.
2. Fieldbus Foundation, What is Fieldbus? http://www.fieldbus.org/About/FoundationTech/
3. G. G. Wood, Fieldbus status 1995, Computing and Control Engineering Journal, 6, December 1995, 251-253.
4. G. G. Wood, Survey of LANs and standards, Computer Standards and Interfaces, 6, 1987, 27-36.
5. N. P. Mahalik (ed.), Fieldbus technology: Industrial Network Standards for Real-Time Distributed Control, Springer, Germany, 2003.
6. H. Töpfer, W. Kriesel, Zur funktionellen und strukturellen Weiterentwicklung der Automati-sierungsanlagentechnik, Messen Steuern Regeln, 24, 1981, 183-188.
7. T. Pfeifer, K.-U. Heiler, Ziele und Anwendungen von Feldbussystemen, Automatisierungstechnische Praxis, 29(12), 1987, 549-557.
8. H. Steusloff, Zielsetzungen und Lösungsansätze für eine offene Kommunikation in der Feldebene, Automatisierungstechnik’90, VDIBerichte, 855, 1990, 337-357.
9. L. Capetta, A. Mella, F. Russo, Intelligent field devices: User expectations, Computing and Control Engineering Journal, 6, December 1995, 270-272.
10. K. Wanser, Entwicklungen der Feldinstallation und ihre Beurteilung, Automatisierungstechnische Praxis, 27(5), 1985, 237-240.
11. J. A. H. Pfleger, Anforderungen an Feldmultiplexer, Automatisierungstechnische Praxis, 29, 1987, 205-209.
12. H. Junginger, H. Wehlan, Der Feldmultiplexer aus Anwendersicht, Automatisierungstechnische Praxis, 31, 1989, 557-564.
13. W. Schmieder, T. Tauchnitz, FuRIOS:Fieldbus and remoteI/O-A system comparison, Automa-tisierungstechnische Praxis, 44, 2002, 61-70.
14. P. Pleinevaux, J.-D. Decotignie, Time critical communication networks: Field buses, IEEE Network, 2, 1988, 55-63.
15. E. H. Higham, Casting a crystal ball on the future of process instrumentation and process measurements, IEEE Instrumentation and Measurement Technology Conference (IMTC '92), New York, May 12-14, 1992, pp. 687-691.
16. J. P. Thomesse, Fieldbusesand interoperability, Control Engineering Practice, 7, 1999, 81-94.
17. J.-C. Orsini, Field bus: A user approach, Cahier Technique Schneider Electric no. 197, 2000, http://www.schneider-electric.com.tr/ftp/literature/publications/ECT197.pdf
18. R. D. Quick, S. L. Harper, HP-IL: Alow-cost digital interface for portable applications, Hewlett-Packard Journal, 34, January 1983, 3-10.
19. Philips Semiconductor, The I2C-Bus Specification, 2000, http://www.semiconductors.philips.com/buses/i2c/
20. H. Zimmermann, OSI reference model: The ISO model of architecture for open system interconnec-tion. IEEE Transactions on Communications, 28(4), 1980, 425-432.
21. J. Day, H. Zimmermann, The OSI reference model, Proceedings of the IEEE, 71(12), 1983, 1334-1340.
22. D. J. Damsker, Assessment of industrial data network standards, IEEE Transactions on Energy Conversion, 3, 1988, 199-204.
23. H. A. Schutz. The role of MAP in factory integration, IEEE Transactions on Industrial Electronics, 35(1), 1988, 6-12.
24. B. Armitage, G. Dunlop, D. Hutchison, S. Yu, Field bus: An emerging communications standard, Microprocessors and Microsystems, 12, 1988, 555-562.
25. S. G. Shanmugham, T. G. Beaumariage, C. A. Roberts, D. A. Rollier, Manufacturing Communication: The MMS approach, Computers and Industrial Engineering, 28(1), 1995, 1-21.
26. T. Phinney, P. Brett, D. McGovan, Y. Kumeda, FieldBus-Real-time comestoOSI, International Phoenix Conference on Computers and Communications, March 27-30, 1991, Scottsdale, AZ, pp. 594-599.
27. K. Bender, Offene Kommunikation-Nutzen, Chancen, Perspektiven für die industrielle Kommunikation, iNet’92, 1992, Sindelfingen, Germany, 15-37.
28. T. Sauter, M. Felser, The importance of being competent-The role of competence centres in the fieldbus world, FeT’99 Fieldbus Technology, Springer, Magdeburg, September 1999, pp. 299-306.
29. Gesmer Updegrove LLP, Government Issues and Policy, http://www.consortiuminfo.org/government/
30. P. Leviti, IEC 61158: An offence to technicians? IFAC International Conference on Fieldbus Systems and Their Applications, FeT 2001, November 15-16, 2001, Nancy, France, pp. 36.
31. M. Felser, T. Sauter, The fieldbus war: History or short break between battles? in Proceedings of the IEEE International Workshop on Factory Communication Systems, Västeräs, Sweden, 2002, pp. 73-80.
32. T. Phinney, Mopping up from bus wars, World Bus Journal, ISA, 2002, 22-23.
33. Z. Wang, Internet QoS: Architectures and Mechanisms for Quality of Service, MorganKaufmann Publishers, San Francisco, CA, 2001.
34. M. Knizak, M. Kunes, M. Manninger, T. Sauter, Modular agent design for fieldbus management, in Proceedings of the IEEE International Conference on Emerging Technologies and Factory Automation, Barcelona, Spain, 1999, pp. 857-864.
35. T. Bangemann, Management of distributed automation systems based on Web technologies, in Pro-ceedings of the IFAC International Conference on Fieldbus Systems and Their Applications, Nancy, France, 2001, pp. 254-259.
36. WordFIP (1998), WWW and TCP/IP: A Web guide [Online]. Available at: http://www.worldfip.org
37. S. Pérez, J. Vila, Building distributed embedded systems with RTLinux-GPL, in Proceedings of the IEEE International Conference on Emerging Technologies and Factory Automation, Lisbon, Portugal, 2003, vol.1, 2003, pp.161-168.
38. C. Eckel, G. Gaderer, T. Sauter, Implementation requirements for Web-enabled appliances-A case study, in Proceedings of the IEEE International Conference on Emerging Technologies and Factory Automation, Lisbon, Portugal, 2003, vol. 2, pp. 636-642.
39. A. Flammini, P. Ferrari, E. Sisinni, D. Marioli, A. Taroni, Sensor integration in industrial environ-ment: From fieldbus to web sensors, Computer Standards and Interfaces, 25(2), 2003, 183-194.
40. A. Flammini, P. Ferrari, E. Sisinni, D. Marioli, A. Taroni, Sensor interfaces: Fromfield-bustoEthernet and Internet, Sensors and Actuators A, 101, 2002, 194-202.
41. N. Pereira, F. Pacheco, L. M. Pinho, A. Prayati, E. Nikoloutsos, A. Kalogeras, E. Hintze, H. Adamczyk, L. Rauchhaupt, Integration of TCP/IP and PROFIBUS protocols, in Proceedings of the IEEE International Workshop on Factory Communication Systems, Västeräs, Sweden, 2002, pp. 157-164.
42. E. Nikoloutsos, A. Prayiati, A. Kalogeras, V. Kapsalis, S. Koubias, G. Papadopoulos, Integrating IP traffic into fieldbus networks, in Proceedings of the IEEE International Symposium on Industrial Electronics, L Aquila, Italy, 2002, pp. 67-72.
43. G. G. Wood, State of play, IEE Review, 46, July 2000, 26-28.
44. K.-J. Beine, Ethernet meets INTERBUS, Interbus Inside, 8, 1999, 1-3.
45. International Electrotechnical Commission, IEC 61158-1, Digital data communications for measure-ment and control-Fieldbus for use in industrial control systems, Part 1: Introduction, 2003.
46. J.-P. Thomesse, M. Leon Chavez, Main paradigms as a basis for current fieldbus concepts, Fieldbus Technology, Springer, 1999, Vienna, Austria, pp. 2-15.
47. C. Diedrich, Profiles for fieldbuses-Scope and description technologies, Fieldbus Technology, Springer, Vienna, Austria, 1999, pp. 90-97.
48. U. Döbrich, P. Noury, ESPRITproject NOAH-Introduction, Fieldbus Technology, Springer, Vienna, Austria, 1999, pp. 414-422.
49. R. Simon, P. Neumann, C. Diedrich, M. Riedl, Fielddevices-models and their realisations, IEEE International Conference on Industrial Technology (ICIT’02), 11-14 December 2002, Bangkok, Thailand, pp. 307-312.
50. A. di Stefano, L. LoBello, T. Bangemann, Harmonized and consistent data management in distributed automation systems: The NOAH approach, IEEE International Symposium on Industrial Electronics, ISIE 2000, Cholula, Mexico, 4-8 December 2000, pp. 766-771.
51. M. Knizak, M. Kunes, M. Manninger, T. Sauter, Applying Internet management standards to fieldbus systems, WFCS’97, Barcelona, Spain, 1-3 October 1997, pp. 309-315.
52. M. Kunes, T. Sauter, Fieldbus-Internet connectivity: TheSNMP approach, IEEE Transactions on Industrial Electronics, 48(6), 2001, 1248-1256.
53. M. Wollschlaeger, Integration of VIGO into directory services, 6th International P-NET Conference, Vienna, Austria, May 1999, pp. 25-26.
54. M. Wollschlaeger, Framework for Web integration of factory communication systems, IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Antibes Juan-les-Pins, 15-18 October 2001, pp. 261-265.
55. J. D. Decotignie, A perspective on Ethernet-TCP/IP as a fieldbus, IFAC International Conference on Fieldbus Systems and Their Applications, FeT 2001, 15-16 November 2001, Nancy, France, pp. 138-143.
56. E. Byres, Ethernet to link automation hierarchy, InTech Magazine, June 1999, 44-47.
57. M. Felser, Real-time Ethernet-Industry prospective, Proceedings of the IEEE, 93, 2005, 1118-1129.
58. V. Schiffer, The CIP family of fieldbus protocols and its newest member-Ethernet/IP, Conference on Emerging Technologies and Factory Automation, ETFA 2001, October 15-18, 2001, Antibes Juan-Les-Pins, France, pp.377-384.
59. M. Volz, Quo Vadis layer 7? The Industrial Ethernet Book, 5, March 2001, p. 21.
60. K. C. Lee, S. Lee, Performance evaluation ofswitched Ethernet for real-time industrial communications, Computer Standards and Interfaces, 24, 2002, 411-423.
61. TC65/SC65C, New work item proposal, 65C/306/NP, 2003.
62. Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems, IEEE Standard 1588, 2002.
63. TC65/SC65C, Meeting minutes, 65C/318/INF, 2003.
64. J. Jasperneite, J. Feld, PROFINET: An integration platform for heterogeneous industrial communi-cation systems, in Proceedings of the IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Catania, 2005, pp. 815-822.
65. J. W. Szymanski, Embedded Internet technology in process control devices, in Proceedings of the IEEE International Workshop on Factory Communication Systems, Porto, Portugal, 2000, pp. 301-308.
66. http://www.ethercat.org/
67. http://www.ethernet-powerlink.com/
68. Schneider Automation (2005, June 15), Modbus Messaging on TCP/IP Implementation Guide [Online]. Available: http://www.modbus.org/
69. J.-P. Thomesse, Fieldbus technology in industrial automation, Proceedings of the IEEE, 93, 2005, 1073-1101.
70. J.-D. Decotignie, Some future directions in fieldbus research and development, Fieldbus Technology, Springer, New York, 1999, pp. 308-312.
71. A. Willig, K. Matheus, A. Wolisz, Wireless technology inindustrial networks, Proceedings of the IEEE, 93, 2005, 1130-1151.
72. L. Rauchhaupt, System and device architecture of a radio based fieldbus-The RFieldbus system, IEEE Workshop on Factory Communication Systems, Västeräs, Schweden, 2002, pp. 185-192.
73. S. Soucek, T. Sauter, G. Koller. Impact of QoS parameters on Internet-based EIA-709.1 control appli-cations, in Proceedings of the Annual Conference of the IEEE Industrial Electronics Society, Sevilla, Spain, 2002, pp. 3176-3181.
74. S. Soucek, T. Sauter, Quality of service concerns in IP-based control systems, IEEE Transactions of the Industrial Electronics, 51 2004, 1249-1258.
75. O. Kunert, Interconnecting field-buses through ATM, in Proceedings of the IEEE International Workshop on Factory Communication Systems, Barcelona, Spain, 1997, pp. 223-229.
76. I. Ôzçelik, H. Ekiz, Design, implementation and performance analysis of the PROFIBUS/ATM Local Bridge, Computer Standards and Interfaces, 26, 2004, 329-342.
77. R. Piggin, An introduction to safety-related networking, IEE Computing and Control Engineering, 15, April/May 2004, 34-39.
78. PROFIBUS International, Profile for Failsafe with PROFIBUS, DP-Profile for Safety Applications, Version 1.2, October 2002, http://www.profibus.com
79. INTERBUS Club, INTERBUS Safety, White Paper, 2003.
80. http://as-i-safety.net
81. ODVA, Safety networks: Increase productivity, reduce work-related accidents and save money, Open DeviceNet Vendor Assoc., White Paper, 2003, http://www.odva.org
82. J.-P. Froidevaux, O. Nick, M. Suzan, Use of fieldbus in safety related systems, an evaluation of World-FIP according to proven-in-use concept of IEC 61508, WorldFIP News, http://www.worldfip.org
83. G. Leen, D. Heffernan, Expanding automotive electronic systems, IEEE Computer, 35, January 2002, 88-93.
84. H. Gharavi, S. P. Kumar (eds.), Special issue on sensor networks and applications, Proceedings of the IEEE, 91(8), 2003, 1151-1153.
85. Tunneling of Component Network Data over IP Channels, EIA-852 Draft, 2000.
86. D. Dietrich, T. Sauter, Evolution potentials for fieldbus systems, in Proceedings of the 3rd IEEE International Workshop on Factory Communication Systems, Porto, Portugal, 2000, pp. 343-350.
87. G. Pratl, M. Lobachov, T. Sauter, Highhymodular gateway architecture for fieldbus/Internet connections, in Proceedings of the IFAC International Conference on Fieldbus Systems and Their Applications, Nancy, France, 2001, pp. 267-273.
88. I. Calvo, M. Marcos, D. Orive, I. Sarachaga, Amethodology basedondistributed object-oriented technologies for providing remote access to industrial plants, Control Engineering Practice, 14, 2006, 975-990.
89. P. Palensky, The JEVIS service platform-Distributed energy data acquisition and management, in R. Zurawski (ed.), The Industrial Information Technology Handbook, CRC Press, Boca Raton, FL, 2005, Chapter 111.
90. V. Kapsalis, L. Hadellis, D. Karelis, S. Koubias, Adynamiccontext-aware access control architecture for e-services, Computers and Security, 25, 2006, 507-521.
91. M. Wollschlaeger, T. Bangemann, Maintenance portals in automation networks-Requirements, structures and model for Web-based solutions, in Proceeding ofthe. IEEE International Workshop on Factory Communication Systems, Wien, Austria, 2004, pp. 193-199.
92. A. C. Weaver, Enforcing distributed data security via Web services, in Proceedings of the IEEE International Workshop on Factory Communication Systems, Wien, Austria, 2004, pp. 397-402.
93. T. Sauter, Linking factory floor and the Internet, in R. Zurawski (ed.), The Industrial Communication Technology Handbook, CRC Press, Boca Raton, FL, 2005, Chapter 24.
94. O. Cramer Nielsen, A real time, object oriented fieldbus management system, 3rd IEEE International Workshop on Factory Communication Systems, Porto, Portugal, 2000, pp. 335-340.
95. A. Baginski, G. Covarrubias, Open control-The standard for PC-based automation technology, IEEE International Workshop on Factory Communication Systems, 1-3 October 1997, pp. 329-333.
96. OPC Data Access Automation Specification, Version 2.0. OPC Foundation, October 14, 1998.
97. R. Bachmann, M. S. Hoang, P. Rieger, Component-based architecture for integrating fieldbus systems into distributed control applications, Fieldbus Technology, Springer-Verlag, Vienna, Austria, 1999, pp. 276-283.
98. R. Simon, M. Riedl, C. Diedrich, Integration of field devices using field device tool (fdt) on the basis of electronic device descriptions (EDD), IEEE International Symposium on Industrial Electronics, ISIE '03 June 9-11, 2003, pp. 189-194.
99. W. H. Moss, Report on ISO TC184/SC5/WG5 open systems application frameworks based on ISO 11898, 5th International CAN Conference (iCC’98), San Jose, CA, 03-05.11. 1998, in Proceedings of the Industrial Automation, pp. 07.02-07.04.
100. M. Lobashov, G. Pratl, T. Sauter, Applicability of internet protocols for fieldbus access, in Proceedings of the IEEE International Workshop on Factory Communication Systems, Västeräs, Sweden, 2002, pp. 205-213.
101. GSD Specification for PROFIBUS-FMS (version 1.0). PNO Karlsruhe.
102. Device Description Language specification. HART Communication Foundation, Austin, 1995.
103. T. Bray, J. Paoli, C. M. Sperberg-McQueen, Extensible Markup Language (XML) 1.0, 1998, http://www. w3.org/TR/REC-xml.
104. M. Wollschlaeger, T. Bangemann, XML based description model as a platform for Web-based maintenance, in 2nd IEEE International Conference on Industrial Informatics (INDIN '04), Berlin, Germany, 2004, pp. 125-130.
105. International Electrotechnical Commission, IEC 61804-2, Function blocks (FB) for process control- Part 2: Specification of FB concept and Electronic Device Description Language (EDDL), 2003.
106. P. Neumann, C. Diedrich, R. Simon, Engineering of field devices using device descriptions, in IFAC World Congress 2002, Barcelona, Spain.
107. M. Wollschlaeger, C. Diedrich, J. Müller, U. Epple, Integration of fieldbus systems into on-line asset management solutions based on fieldbus profile descriptions, in Proceedings of the IEEE International Workshop on Factory Communication Systems, Västeräs, Sweden, 2002, pp. 89-96.
108. T. Sauter, Ch. Schwaiger, Achievement of secure Internet access to fieldbus systems, Microprocessors and Microsystems, 26, 2002, 331-339.
109. P. Palensky, T. Sauter, Security considerations for FAN-Internet connections, IEEE International Workshop on Factory Communication Systems, Porto, Portugal, 6-8 September 2000, pp. 27-35.
110. T. Bangemann, J. Hähniche, P. Neumann, Integration of fieldbus systems into computer-aided network facility management, in Proceedings of the Annual Conference of the IEEE Industrial Elec-tronics Society, Aachen, Germany, 1998, pp. 1835-1840.
111. L. Hadellis, S. Koubiasa, V. Makios, An integrated approach for an interoperable industrial networking architecture consisting of heterogeneous fieldbuses, ComputersinIndustry, 49, 2002, 283-298.
112. CAMAC, A Modular instrumentation system for data handling, EUR4100e, March, 1969.
113. http://www.hit.bme.hu/people/papay/edu/GPIB/tutor.htm
114. National Instruments, GPIB Tutorial, www.raunvis.hi.is/~rol/Vefur/%E9r%20Instrupedia/CGPTUTO. PDF
115. W. Büsing, Datenkommunikation in der Leittechnik, Automatisierungstechnische Praxis, 28, 1986, 228-237.
116. G. Färber, Bussysteme, 2nd edn, Oldenbourg-Verlag, München, 1987.
117. M-Bus Usergroup, The M-Bus: A Documentation, Version 4.8 November 11, 1997, http://www.m-bus.com/mbusdoc/default.html
118. G. Leen, D. Heffernan, A. Dunne, Digital networks in the automotive vehicle, IEE Computer and Control Engineering Journal, 10, December 1999, 257-266.
119. CAN-in-Automation, CAN history, http://www.can-cia.de/can/protocol/history/
120. Condor Engineering, MIL-STD-1553 Tutorial, http://www.condoreng.com/support/downloads/tutorials/MIL-STD-1553Tutorial. PDF
121. Grid Connect, The Fieldbus Comparison Chart, http://www.synergetic.com/compare.htm
122. Interbus Club, Interbus Basics, 2001, http://www.interbusclub.com/en/doku/pdf/interbus_basics_ en.pdf
123. H. Kirrmann, Industrial Automation, lecture notes, EPFL, 2004, http://lamspeople.epfl.ch/kirrmann/IA_slides.htm
124. H. Wölfel, Die Entwicklung der digitalen Prozeßleittechnik-Ein Rückblick (Teil 3), Automa-tisierungstechnische Praxis, 40, 1998, S17-S24.
125. T. Sauter, D. Dietrich, W. Kastner (eds.), EIB Installation Bus System, PublicisMCD, Erlangen, Germany, 2001.
126. E. B. Driscoll, The history of X10, http://home.planet.nl/~lhendrix/x10_history.htm
127. K. Thramboulidis, Development of distributed industrial control applications: The CORFU framework, in Proceedings of the IEEE International Workshop on Factory Communication Systems, Västeräs, Sweden, 2002, pp. 39-46.
128. S. Kweon, M.-G. Cho, K. G. Shin, Softreal-time communicationoverEthernet with adaptive traffic smoothing, IEEE Transactions on Parallel and Distributed Systems, 15, 2004, 946-959.
129. L. Lo Bello, G. Kaczynski, O. Mirabella, Improving the real-time behaviour of Ethernet networks using traffic smoothing, IEEE Transactions on Industrial Informatics, 1, 2005, 151-161.
130. T. Skeie, S. Johannessen, O. Holmeide, Timeliness of real-time IP communication in switched industrial Ethernet networks, IEEE Transactions on Industrial Informatics, 2, 2006, 25-39.
131. Y. Song, Time constrained communication over switched Ethernet, in Proceedings of the IFAC International Conference on Fieldbus Systems and Their Applications, Nancy, France, 2001, pp. 152-159.
132. J. Jasperneite, P. Neumann, M. Theis, K. Watson, Deterministic real-time communication with switched Ethernet, in Proceedings of the IEEE International Workshop on Factory Communication Systems, Västeräs, Sweden, 2002, pp. 11-18.
133. M. Cho, K. G. Shin, On soft real-time guarantees on the Ethernet, in Proceedings of the International Conference on Real-Time and Embedded Computing Systems and Applications, Tainan, Taiwan, 2003, pp. 59-76.
134. S. H. Pee, R. H. Yang, J. Berge, B. Sim, Foundation fieldbus high speed Ethernet (HSE) implementa-tion, in Proceedings of the IEEE International Symposium on Intelligent Control, Vancouver, Canada, 2002, pp. 777-782.
135. IEC SC65C, Real Time Ethernet: P-NET on IP, IEC 65C/360/NP, 2004.
136. J. Jasperneite, K. Shehab, K. Weber, Enhancements to the time synchronization standard IEEE-1588 for a system of cascaded bridges, in Proceedings of the IEEE International Workshop on Factory Communication Systems, Wien, Austria, 2004, pp.239-244.
137. G. Gaderer, R. Höller, T. Sauter, H. Muhr, Extending IEEE 1588 to fault tolerant synchronization, in Proceedings of the IEEE International Workshop on Factory Communication Systems, Wien, Austria, 2004, pp. 353-357.
138. T. Sauter, Fieldbus systems: History and evolution, in R. Zurawski (ed.), The Industrial Communication Technology Handbook, CRC Press, Boca Raton, FL, 2005, pp. 7.1-7.39.
139. J.-P. Thomesse, Z. Mammeri, L. Vega, Timein distributed systems cooperationand communication models, in Proceedings of the Fifth IEEE Computer Society Workshop on Future Trends of Distributed Computing Systems, Cheju Island, South Korea, 1995, pp. 41-49.
140. H. Kopetz, Event triggered vs time triggered real time systems, in: A. Karshmer and J. Nehmer, eds., Proc. Int. Workshop on Operating Systems of the 90s and Beyond, Lecture Notes in Computer Science, vol. 563, Springer, Berlin, 1990, pp. 87-101.
141. N. C. Audsley, A. Grigg, Timing analysis of the ARINC 629 databus for real-time applications, Microprocessors and Microsystems, 21, 1997, 55-61.
142. S. Cavalieri, S. Monforte, A. Corsaro, G. Scapellato, Multicycle polling scheduling algorithms for fieldbus networks, Real-Time Systems, 25(2-3), 2003, 157-185.