Fundamentals of Machining Processes: Conventional and Nonconventional Processes, Second Edition

Fundamentals of Machining Processes: Conventional and Nonconventional Processes, Second Edition

Volumn , Issue , 2013, Pages 1-507

  El Hofy, Hassan Abdel Gawad ^a  

^a NONE   (Egypt)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85134862685     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/b15339     Document Type: Book

References (54)

1. American National Standard ANSI–ASME B94, 19-1968.
2. Arshinov, V. and G. Alekseev. 1970. Metal Cutting Theory and Cutting Tool Design, Moscow, Russia: Mir Publishers.
3. ASM International. 1989. Machining, in Metals Handbook, Vol. 16, Materials Park, OH: ASM International.
4. ASME. 1985. Surface Roughness, Waviness, and Lay, ANSI/ASME B 46.1-1985. New York: American Society of Mechanical Engineers.
5. Bellow, G. 1978. Low Stress Grinding, MDC 78 103, Cincinnati, OH: Machinability Data Center.
6. Boothroyde, G. 1963. Temperature in orthogonal metal cutting. Proc. IME, 117: 789.
7. Boothroyde, G. 1981. Fundamentals of Metal Machining and Machine Tools, New York: McGraw Hill.
8. Das, M. 2011. Experimental investigation of rotational-magnetorhelogical abrasive flow finishing (R-MARAFF) process and a CFD based numerical study of MRAFF process. Ph.D. thesis, Indian Institute of Technology, Kanpur, India.
9. Datta, M. 1995. Data fabrication of an array of precision nozzles by through-mask electrochemical micromachining. J. Electrochem. Soc., 142: 3801–3805.
10. Datta, M. and D. Harris. 1997. Electrochemical micromachining: An environmentally friendly, high speed processing technology. Electrochem. Acta, 42: 3007–3013.
11. El-Hofy, H. 2005. Advanced Machining Processes, Non-Traditional and Hybrid Processes, New York: McGraw Hill.
12. Field, M. and J.F. Kahles. 1971. Review of surface integrity of machined components. Ann. CIRP, 20(2): 153–163.
13. Fox, M., A. Agrawal, T. Shinmura, and R. Komanduri. 1994. Magnetic abrasive finishing of rollers. Ann. CIRP, 43(1): 181–184.
14. Fujino, M., N. Okamoto, and T. Masuzawa. 1995. Development of multipurpose micro processing machine, in International Symposium for Electro Machining (ISEM-XI), Lausanne, Switzerland: IFPL, pp. 613–620.
15. Hashish, M. 1986. Aspects of abrasive water jet performance optimization, in Proceedings of the 8th International Symposium on Jet Cutting Technology, Durham, U.K., pp. 297–308.
16. Hitomi, Y. and T. Shinimura. 1995. Magnetic abrasive finishing of inner surfaces of tubes, in International Symposium for Electro Machining (ISEM-XI), Lausanne, Switzerland: IFPL, pp. 883–890.
17. Jain, R.K. 1993. Production Technology, 13th edn., Delhi, India: Khanna Publishers.
18. Jain, V.K. 2004. Advanced Machining Processes, New Delhi, India: Allied Publishers PVT.
19. Jain, N.K. and V.K. Jain. 2001. Modeling of material removal in mechanical type advanced machining processes: A state of the art review. Int. J. Mach. Tools Manuf., 41: 1573–1635.
20. Jain, R.K., V.K. Jain, and P.K. Karla. 1999. Modeling of abrasive flow machining process, a neural network approach. Wear, 231: 242–248.
21. Juneja, B. L. 1984. Machining Processes Theory and Practice, Delhi, India: CBS Publishers and Distributors.
22. Kaczmarek, J. 1976. Principles of Machining by Cutting, Abrasion and Erosion, Stevenage, U.K.: Peter Peregrines.
23. Kahles, J.F. and Cammett, J.T. 1972. Review of surface integrity of machined components. Ann. CIRP, 21(2): 219–238.
24. Kalpakjian, S. 1997. Manufacturing Process for Engineering Materials, Menlo Park, CA: Addison-Wesley.
25. Kim, J.D. and M.S. Choi. 1995. Simulation for the prediction of surface accuracy in magnetic abrasive machining. J. Mater. Process. Technol., 53: 630–642.
26. Kozak, J., M. Rozenek, and L. Dabrowiski. 2003. Study of electric discharge machining using powder suspended working media. J. Eng. Manuf., 217(B): 1597–1602.
27. Kumar, T.R. 1998. Theoretical and experimental investigations into abrasive flow machining. M. Tech. Thesis, I.I.T., Kanpur, India.
28. Kustas, F. M., L. L. Fehrehnbacher, and R. Kumanduri. 1997. Nanocoating of cutting tools for dry machining. Ann. CIRP, 46(1): 39–42.
29. Lissaman, A.J. and S.J. Martin. 1978. Principles of Engineering Production, 7th edn., London, U.K.: Hodder and Stoughton.
30. Masuzawa, T. 2000. State of the art of micromachining. Ann. CIRP, 49(2): 1–16.
31. Masuzawa, T. and H.K. Tonshof. 1997. Three-dimensional micro machining by machine tools. Ann. CIRP, 46:2, 821–828.
32. McGeough, J. 1974. Principles of Electrochemical Machining, London, U.K.: Chapman & Hall.
33. McGeough, J. 1988. Advanced Methods of Machining, London, U.K.: Chapman & Hall.
34. McGeough, J. 2002. Micromachining of Engineering Materials, New York: Marcel Dekker.
35. Nakayama, K. 1956. Temperature rise of workpiece during metal cutting. Bull. Fac. Eng. Yokohama Natl. Univ. Japan, 5: 1.
36. Oberg, E., F.D. Jones, and H.L. Horton. 1984. Machinery’s Handbook, 22nd edn., New York: Industrial Press.
37. Ostwald, P.F. and J. Munoz. 1997. Manufacturing Processes and Systems, New York: Wiley.
38. Pandey, P.C. and C.K. Singh. 1999. Production Engineering Science, Delhi, India: Standard Publishers Distributors.
39. Pugh, E.H. 1958. Mechanics of the cutting process. Proceedings of the IME Conference on Technology of Engineering Manufacture, London, U.K., p. 237.
40. Rao, P.N. 2000. Manufacturing Technology: Metal Cutting and Machine Tools, 8th edn., New Delhi, India: Tata McGraw Hill Publishing Company Limited.
41. Ricciardi, G., M. Gantello, and G. Savant-Aira. 1996. Marking of computer keyboards by means of excimer lasers. Ann. CIRP, 45(1): 191–196.
42. Rumyantsev, E. and A. Davydov. 1984. Electrochemical Machining of Metals, Moscow, Russia: Mir Publishers.
43. Salmon, S.C. 1992. Modern Grinding Process Technology, Boston, MA: McGraw Hill.
44. Schey, J.A. 2000. Introduction to Manufacturing Processes, 3rd edn., Boston, MA: McGraw Hill.
45. Schultz, H. 1992. High speed machining. Ann. CIRP, 41(2): 637–643.
46. Shaw, M.C. 1956. Ultrasonic grinding. Microtenic, 10: 257.
47. Shaw, M.C. 1984. Metal Cutting Principles, Oxford, U.K.: Oxford University Press.
48. SME. 1976. Tool and Manufacturing Engineers Handbook, Dearborn, MI: McGraw Hill.
49. Spadlo, S. 2002. Comparative studies of brush electrodischarge machining with electrode of alloy steel and tungsten. 6th International Conference on Advanced Manufacturing Systems and Technology Proceedings, E. Kuljanic, ed., Wien, Austria: Springer Verlag.
50. Swineheart, H.J. 1968. Cutting Tool Material Selection, Dearborn, MI: ASTME.
51. Tipton, H. 1971. The determination of the shape of tools for use in electrochemical machining. MTIRA Report No 40, Macclesfield, U.K.: MTIRA.
52. Tlusty, J. 1993. High Speed Machining. Ann. CIRP, 42(2): 733–738.
53. Youssef, H.A. 1976. Theory of Metal Cutting, Alexandria, Egypt: Dar Al-Maaref.
54. Youssef, H.A. and H. El-Hofy, 2008. Machining Technology, Machine Tools and Operations, Boca Raton, FL: CRC Press Co.