TOYOTA Production System: An Integrated Approach to Just-In-Time, Fourth Edition

Toyota Production System: An Integrated Approach to Just-In-Time, 4th Edition

Volumn , Issue , 2011, Pages 1-500

  Monden, Yasuhiro ^a  

^a NONE   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85133043667     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/b11731     Document Type: Book

References (342)

1. AIAG and APICS. Proceedings of the Production and Inventory Control Conference, Fall 1981. Sponsored by Detroit chapter of APICS and Automotive Industry Action Group.
2. Aghdassi, M. and Monden, Y. 1993; 1998. Quantitative Analysis of Stocks in a JIT Multistage Productions System Using the Constant Order Cycle Withdrawal Method, In Monden, Y. 1993; 1998. Toyota Production System, 2nd and 3rd Editions, Institute of Industrial Engineering. Appendix 3.
3. Aghdassi, M. and Monden, Y. 1993; 1998. Quantitative Analysis of Lot Size in a JIT Production System Using Constant Order Quantity Withdrawal Method, In Monden, Y. 1993; 1998. Toyota Production System, 2nd and 3rd Editions, Institute of Industrial Engineering. Appendix 4.
4. Aghdassi, M. 1988. A Quantitative Analysis of Just-In-Time Production, PhD dissertation, The University of Tsukuba.
5. Aigbedo, H. and Monden, Y. 1996. A Simulation Analysis for Two Level Sequence-Scheduling for Just-in-Time (JIT) Mixed Model Assembly Lines, International Journal of Production Research, 34(11):3107-3124.
6. Aigbedo, H. and Monden, Y. 1997. A Parametric Procedure for Multicriterion Sequence Scheduling for Just-In-Time (JIT) Mixed Model Assembly Lines, International Journal of Production Research, 35(9):2543-2564.
7. Aigbedo, H. 2000. Just-In-Time and Its Cost Reduction Framework, in: Monden, Y. (ed.), Japanese Cost Management, Imperial College Press, London, UK. 205-228.
8. Aigbedo, H. and Monden, Y. 2001. Just-In-Time and Kanban Scheduling, Kjell B. Zandin (ed.), Maynard’s Industrial Engineering Handbook, 5th Edition, H. B. Maynard and Company.
9. Akter, M., Lee, J. Y. and Monden, Y. 1999. Motivational Impact of the Type and Tightness of Target Cost Information: A Laboratory Experiment, Advances in Management Accounting, 8:159-171.
10. American Machinist. Kanbans Are Discovered, February 1981, 222.
11. American Production and Inventory Control Society. Pittsburgh Chapter, Proceedings from Productivity: The Japanese Formula. October 1980.
12. Ashbuen, A. 1977. Toyota's “Famous Ohno System.” American Machinist, 120-123.
13. Berggren, K. 1997. The Volvo Experience, Alternative to Lean Production in the Swedish Auto Industry, Macmillan, 1993.
14. Berggren, K. 1993. The Volvo Uddevalla Plant: Why the Decision to Close It Is Mistaken, Journal of Industry Studies, 1(1): 75-87.
15. Bodek, N., ed. 1980. Kanban: The Coming Revolution? Productivity News Letter 1(7): December 1-2.
16. Bodek, N., ed. 1981. Productivity: Three Practical Approaches, Proceedings of the Productivity Seminar, held by Productivity, Inc. February 23, 1981, Chicago.
17. Buffa, E. S. 1984. Meeting the Competitive Challenge: Manufacturing Strategy for U.S. Companies, Irwin.
18. Butt, D. 1981. Just-in-Time in Lincoln, Nebraska: Why and How. In Bodek (1981), ibid.
19. Chandler, A.D. Jr. 1977. The Visible Hand: The Managerial Revolution in American Business, The Belknap Press of Harvard University Press.
20. Cho, F. and Makise, K. 1980. Toyota's Kanban, the Ultimate in Efficiency and Effectiveness. Proceedings of American Production and Inventory Control Society.
21. Cooper, R. 1995. When Lean Enterprises Collide: Competing through Confrontation, Harvard Business School Press, Boston, MA.
22. Cyert, R. M. and March, J. G. 1963. A Behavioral Theory of the Firm, Prentice-Hall, Englewood Cliffs, NJ.
23. Ellegard, K. 1995a. The Creation of a New Production System at the Volvo Automobile Plant in Uddevalla, Sweden, in: Sandberg (1995a).
24. Ellis, H. B. 1981. U.S. Production, Japanese Style: Kawasaki Motorcycle Plant in Nebraska, The Christian Science Monitor, p. 1.
25. Engstrom, T. and Medbo, L. 1994. Intra-Group Work Patterns in Final Assembly of Motor Vehicles, International Journal of Operations and Production Management, 101-113.
26. Engstrom, T. and Medbo, L. 1995. Production System Design—A Brief Summary of Some Swedish Design Efforts, in: Sandberg (1995), 61-73.
27. Engstrom, T., Jonsson, D., Medbo, L. and Medbo, P. 1995. Inter-Relations between Product Variant Codifications and Assembly Work for Flexible Manufacturing in Autonomous Groups, Journal of Materials Processing Technology 52:133-140.
28. Feigenbaum, A. V. 1961. Total Quality Control. New York: McGraw-Hill.
29. Fujimoto, K. 1980. Serving the Big Manufacturers: How to Cope with Short Lead Time and Changing Delivery Schedules, American Production and Inventory Control Society.
30. Funk, J. 1989. A Comparison of Inventory Cost Reduction Strategies in a JIT Manufacturing System, International Journal of Production Research, 27:1065-1080.
31. Galbraith, J. R. 2002. Designing Organization: An Executive Guide to Strategy, Structure, and Process, New and Revised Edition, John Wiley & Sons.
32. Hall, R. W. and Vollman, T. W. 1978. Planning Your Material Requirement, Harvard Business Review.
33. Hall, R. W. 1981. Driving the Productivity Machine: Production Planning and Control in Japan, American Production and Inventory Control Society.
34. Hamada, K. and Monden, Y. 1989. Profit Management at Kyocera Corporation: The Amoeba System, in: Monden, Y. and Sakurai M. (eds.), Japanese Management Accounting, Productivity Press, Cambridge, MA, 197-210.
35. Horngren, C., Foster, G. and Datar, M. 1997. Cost Accounting: A Managerial Emphasis, 9th Edition, Prentice-Hall, Upper Saddle River, NJ.
36. Horngren, C., Foster, G. and Datar, M. 2000. Cost Accounting: A Managerial Emphasis, 10th Edition, Prentice-Hall, Upper Saddle River, NJ.
37. Hoque, M. and Monden, Y. 2000. Effects of Designers’ Participation and Evaluation Measures on Simultaneous Achievement of Quality and Costs of Product Development, International Journal of Innovation Management, 4(1):77-96.
38. Hoque, M., Akter, M. and Yamada, S. 2000. How QFD and VE should be Combined for Achieving Quality & Cost in Product Development, in: Monden, Y. (ed.) Japanese Cost Management, Imperial College Press.
39. Hoque, M. and Monden, Y. 2002. An Empirical Study on Simultaneous Achievement of Quality, Cost and Timing in Product Development, International Journal of Manufacturing Technology and Management, 4(1-2): 1-20.
40. Hoque, M., Akter, M. and Monden, Y. 2005. Concurrent Engineering: A Compromising Approach to Develop a Feasible and Customer-Pleasing Product, International Journal of Production Research, 43(8):1607-1624.
41. Hoshi, N. and Monden, Y. 2000. Profit Evaluation Measure for the Divisional Managers in Japanese Decentralized-Company—Focusing on Controllable Costs and Central Headquarters Costs, in: Monden, Y. (ed.), Japanese Cost Management, Imperial College Press.
42. Imai, M. 1986. KAIZEN—The Key to Japan’s Competitive Success, Random House Business Division.
43. Japan Management Association. 1980. Proceedings of the International Conference on Productivity and Quality Improvement: Study of Actual Cases, Tokyo.
44. Japan Productivity Center for Socio-Economic Development Tokyo, 1995. Practical Kaizen for Productivity Facilitators II.
45. Kaplan, R. 1993. Research Opportunities in Management Accounting, Journal of Management Accounting Research, Fall. 5:1-14.
46. Kaplan, R. and Norton, D. 1996. The Balanced Scorecard: Transplanting Strategy into Action, Harvard Business School Press, Boston, MA.
47. Karlson, C. and Ahlstrom, P. 1966. Assessing Changes toward Lean Production, International Journal of Operations and Production Management, 16(2):24-41.
48. Kasanen, E., Lukka, K. and Siitonen, A. 1993. The Constructive Approach in Management Accounting Research, Journal of Management Accounting Research, 5:223-264.
49. Kimura, O. and Terada, H. 1981. Design and Analysis of Pull System: A Method of Multi-Stage Production Control. International Journal of Production Research 19(3): 241-253.
50. Koch, H. 1958. Zur Discussion über den Kostenbegriff, Zeitschrift für handelswirtschaftli-che Forshung, 355−399.
51. Lawrence, P. R. and Lorsch, J. W. 1967. Organization and Environment: Managing Differentiation and Integration. Harvard University Press.
52. Lee, J. Y. and Monden, Y. 1996. An International Comparison of Manufacturing-Friendly Cost Management Systems, The International Journal of Accounting, 31(2): 197-212.
53. Lee, J. Y. and Monden, Y. 1996. Kaizen Costing: Its Structure and Cost Management Functions, Advances in Management Accounting, 5: 27-40.
54. Makido, T. 1989. Recent Trends in Japan’s Cost Management Practices, Chapter 1, in Monden and Sakurai (1989), 3-13.
55. Miles, L. D. 1961. Techniques of Value Analysis and Engineering, McGraw-Hill.
56. Miltenburg, J. A. 1993. A Theoretical Framework for Understanding How JIT Reduces Cost and Cycle Time and Improves Quality, International Journal of Production Economics, 30-31:195-204.
57. Monden, Y. 1981. What Makes the Toyota Production System Really Tick? Industrial Engineering 13(1):36-46.
58. Monden, Y. 1981. Adaptable Kanban System Helps Toyota Maintain Just-in-Time Production, Industrial Engineering 13(5):28-46.
59. Monden, Y. 1981. Smoothed Production Lets Toyota Adapt to Demand Changes and Reduce Inventory, Industrial Engineering 13(8):41-51.
60. Monden, Y. 1981. How Toyota Shortened Supply Lot Production Time, Waiting Time and Conveyance Time, Industrial Engineering 13(9):22-30.
61. Monden, Y. 1982. The Transfer Price Based on a Shadow Price for Resource Transfers among Departments, in: Sato, Sakate, Mueller, and Radebauch (eds.), Accounting and Information for Management Decision and Control in Japan, American Accounting Association:55-71.
62. Monden, Y. 1983. Toyota Production System, First Edition, Industrial Engineering and Management Press, Norcross, GA.
63. Monden, Y. 1993. Toyota Production System, 2nd Edition, Industrial Engineering and Management Press. Norcross, GA.
64. Monden, Y. 1998. Toyota Production System, 3rd Edition, Industrial Engineering and Management Press, Norcross, GA.
65. Monden, Y., ed. 1985. Applying Just In Time: The American/Japanese Experience, Industrial Engineering and Management Press, Norcross, GA.
66. Monden, Y., Shibakawa, R., Takayanagi, S. and Nagao, T., eds. 1986. Innovations In Management: The Japanese Corporation. Industrial Engineering and Management Press, Norcross, GA.
67. Monden, Y. and Nagao, T. 1987/88. Full Cost-Based Transfer Pricing in the Japanese Auto Industry: Risk-Sharing and Risk-Spreading Behavior, Journal of Business Administration, 17(1-2):117-136.
68. Monden, Y. and Sakurai, M., eds. 1989. Japanese Management Accounting, Productivity Press.
69. Monden, M. 1993a. Japanese New-Product Development Techniques: The Target-Costing System in the Automotive Industry, Journal of Industry Studies, 1(1):43-49.
70. Monden, Y. 1993b. The Toyota Management System: Linking the Seven Key Functional Areas, Productivity Press.
71. Monden, Y., Akter, M., and Kubo, N. 1997. Target Costing Performance Based on Alternative Participation and Evaluation Methods: A Laboratory Experiment, Managerial and Decision Economics, 18:113-129.
72. Monden, Y. and Sakurai, M., eds. 1989. Japanese Management Accounting, Productivity Press.
73. Monden, Y. 1992. Cost Management in the New Manufacturing Age: Innovations in the Japanese Automotive Industry, Productivity Press.
74. Monden, Y. and Hamada, K. 1992. Target Costing and Kaizen Costing in the Japanese Automobile Companies, Journal of Management Accounting Research, 3:16-34.
75. Monden, Y. and Lee, J. Y. 1993. How Japanese Auto Maker Reduces Cost: Kaizen Costing Drives Continuous Improvement at Daihatsu, Management Accounting (IMA), August 22-26.
76. Monden, Y. 1995. Cost Reduction System: Target Costing and Kaizen Costing, Productivity Press.
77. Monden, Y. 1998. Toyota Production System: An Integrated Approach to Just-In-Time. 3rd Edition. Engineering and Management Press, Norcross, GA.
78. Monden, Y. and Hoque, M. 1999. Target Costing based on QFD, Controlling, Heft 11:525-534.
79. Monden, Y. 2000. Management Accounting for Productivity Improvement in Administrative Departments: Monden’s Kaizen System, in: Monden, Y. (ed.) Japanese Cost Management, Imperial College Press.
80. Monden, Y. 2002. The Relationship between Mini Profit-Center and JIT System, International Journal of Production Economics, 80(2):145-154.
81. Monden, Y. 2011. Management Control System for Inter-Firm Cooperation: Incentive Price as Profit-Allocation Scheme, in: Monden, Y. (ed.) 2011. Management of Inter-Firm Network, World Scientific.
82. Monden, Y., Miyamoto, K., Hamada, K., Lee, G. and Asada, T. 2006. Value-Based Management of the Rising Sun (Japan), World Scientific.
83. Monden, Y., Kosuga, M., Nagasaka, Y., Hiraoka, S. and Hoshi, N. 2007. Japanese Management Accounting Today, World Scientific.
84. Mori, M. and Harmon, R. L. 1980. Combining the Best of the West with the Best of the East-MRP and KANBAN Working in Harmony, Proceedings of American Production and Inventory Control Society.
85. Mouritsen, J. and Thrane, S. 2006. Accounting, Network Complementarities and the Development of Inter-organizational Relations, Accounting, Organizations and Society, 31: 241-275.
86. Muramatsu, R. and Miyazaki, H. 1976. A New Approach to Production Systems through Developing Human Factors in Japan, International Journal of Production Research 14(2):311-326.
87. Muramatsu, R., Miyazaki, H., and Tanaka, Y. 1980. An Approach to the Design of Production Systems Giving a High Quality of Working Life and Production Efficiency, International Journal of Production Research 18(2):131-141.
88. Muramatsu, R., Miyazaki, H., and Tanaka, Y. 1981. Example of Increasing Productivity and Product Quality through Satisfying the Worker's Desires and Developing the Worker's Motivation, AIIE 1981 Spring Annual Conference Proceedings, Industrial Engineering and Management Press, 652-660.
89. Nikko Salomon Smith Barney. 2000. Auto Manufacturers: Toyota Motor (7203-TM) Value Chain Strategy (1):25-32.
90. Okamura, K. and Yamashina, H. 1979. A Heuristic Algorithm for the Assembly Line Model-Mix Sequencing Problem to Minimize the Risk of Stopping the Conveyor, International Journal of Production Research 17(3):233-247.
91. Patchin, R. 1981. Quality Control Circles, in Bodek (1981).
92. Rosengren L. 1981. Potential Performance of Dock versus Line Assembly, International Journal of Production Research 19:139-152.
93. Ryan, B., Scapens, R. W., and Theobald, M. 1995. Research Method and Methodology in Finance and Accounting, Academic Press.
94. Ross, D., Wamak, J. P. and Jones, D. 1990. The Machine That Changed the World, Macmillan.
95. Runcie, J. F. 1980. By Days I Make the Cars, Harvard Business Review.
96. Sakurai, M. 1989. Target Costing and How to Use It, Journal of Cost Management, Summer, 39-50.
97. Sandberg, A. ed. 1995. Enriching Production, Perspectives on Volvo’s Uddevala Plant as an Alternative to Lean Production, Avebury.
98. Shingo, S. 1981. Study of “Toyota” Production System from Industrial Engineering Viewpoint, Japan Management Association.
99. Schmalenbach, E. 1947. Pretiale Wirtshaftslenkung, Band 1: Die optimale Geltungszahl, Industrie-und Handelsverlag Walter Dorn GmbH.
100. Schmalenbach, E. 1948. Pretiale Wirtshaftslenkung, Band 2: Pretiale Lenkung des Betriebs, Industrie-und Handelsverlag Walter Dorn GmbH.
101. Schonberger, R. J. 1982. Japanese Manufacturing Techniques: Nine Hidden Lessons in Simplicity, Free Press, New York.
102. Slack, N. and Wild, R. 1975. Production Flow Line and “Collective” Working: A Comparison, International Journal of Production Research 13(4):411-418.
103. Skiner, A. 1970. The Wealth of Nations: Books 1-3/Adam Smith: With an Introduction by Andrew Skinner, Harmondsworth, Middlesex: Penguin.
104. Smith, A. 1776 (1st ed.), 1789 (5th ed.). An Inquiry into the Nature and Causes of the Wealth of Nations. London: printed for A. Strahan; and T. Cadell, in the Strand, MDCCLXXXIX.
105. Solomons, D. 1965. Divisional Performance: Measurement and Control, Richard D. Irwin.
106. Stevenson, W. J. 1990. Production/Operations Management, 3rd Edition, Homewood, IL: Irwin.
107. Stewart, W. 1981. Productivity Measurement, in Bodek (1981).
108. Sugimori, Y., Kusunoki, K., Cho, F., and Uchikawa, S. 1977. Toyota Production System and Kanban System, Materialization of Just-In-Time and Respect-for-Humanity System, International Journal of Production Research 15(6):553-564.
109. Suzuki, H. 1993. Introduction IPI Practical KAIZEN: Part I, Japan Productivity Center.
110. Swamidass, P. M., ed. 2000. Encyclopedia of Production and Manufacturing Management, Kluwer.
111. Tompson, P. R. 1985. The NUMMI Production System, in: American Production and Inventory Control Society (ed.), 1985 Conference Proceedings, 400.
112. Toyoda, A. 2010. Prepared Testimony of Akio Toyoda President, Toyota Motor Corporation, Committee on Oversight and Government Reform, U.S. Government, February 24.
113. Vogel, E. F. 1979. Japan as Number One: Lessons for America, Harvard University Press.
114. Vollum, R. B. 1987. Production Activity Control, in: White, J. A. (ed.), Production Handbook, 4th Edition, John Wiley & Sons: 3-194.
115. The Wall Street Journal (WSJ.com.) 2010. Crash Data Suggest Driver Error in Toyota Accidents, July 13 and 30.
116. Waterbury, R. 1981. How Does Just-in-Time Work in Lincoln, Nebraska? Assembly Engineering, April, 52-56.
117. Wild, N. 1975. On the selection of mass production systems, International Journal of Production Research 13(5):443-461.
118. Stevenson W. J. 1990. Production/Operations Management, 3rd Edition, Homewood, IL: Irwin, 354-356.
119. Yamada, T., Kitajima, S., and Imaeda, K. 1980. Development of a New Production Management System for the Co-Elevation of Humanity and Productivity, International Journal of Production Research 18(4):427-439.
120. Zeramdini, W., Aigbedo, H., and Monden, Y. 1988. A Two-Step Approach for Scheduling Products for JIT Mixed-Model Assembly Lines, 1998 Proceedings Asia Pacific Decision Sciences Institute Conference, 524-526.
121. Zeramdini, W., Aigbedo, H., and Monden, Y. 1999. Using Genetic Algorithms for Sequencing Mixed-Model Assembly Lines to Level Parts Usage and Workload, Proceedings of the Second Asia-Pacific Conference on Industrial Engineering and Management Systems (APIEMS’99), Oct. 30-31, 1999, Kanazawa, Japan, 589-592.
122. Zeramdini, W., Aigbedo, H., and Monden, Y. 2000. Bicriteria Sequencing for Just-in-time Mixed-Model Assembly Line, International Journal of Production Research, 38(15):3451-3470.
123. Akao, Y. 1980. Functional management and departmental management. Hinshitsukanri 31(5): 14-18.
124. Akao, Y. 1978. Toyota, Its True Nature. Seki Bun Sha.
125. Aoki, M. 2007. Full Illustration of the Systems of Toyota Production Plants, Nihon-Jitsugyou Shuppansha.
126. Aoki, S. 1981. Functional Management as Top Management-Concepts at Toyota Motor Co., Ltd. and Its Actual Execution. Hinshitsukanri. 32(2): 92-98; 32(3): 66-71; 32(4): 65-69.
127. Aona, F. 1982. Toyota’s Sales Strategy. Diamond.
128. Arita, S. 1978. A Consideration of the Effect of Smoothed Production on the Reduction of Work-in-Process Inventory. Kojokanri. 24(13): 109-115.
129. Ban, S. and Kimura, O. 1986. Toyota’s Manufacturing Departments: Complete Implementation of Basic Principles and Incorporation of Flexibility. JMA Production Management, October, 13-22.
130. Cho, F. 2010. Inventory Reduction was not Compromised between Manufacturing and Sales Departments Before, Nikkei Economic Journal, June 1.
131. Delphys IT Works, ed. 2001. Toyota and Gazoo: Strategic Business Model as a Whole, Chuoh Keizaisha.
132. Endo, K. 1978. Toyota System-Image and True Nature. Kojokanri, 24(13): 141-145.
133. Fujimoto, K. 1983. American Kanban System: Plant Revolution through MPR, Diamond-sha.
134. Fujimoto, T. 1997. Evolution of Production System, Yuhikaku.
135. Fujimoto, T. 2004. Japanese Manufacturing Philosophy, Nihon Keizai Shinbunsha.
136. Fujimoto, T., Nishiguch, T. and Ito, H. 1998. Readings of Supplier System: Forming the New Inter-Firm Relations, Yuhikaku.
137. Fujita, A. 1978. Merits and Faults of Toyota Production System. Kojokanri, 24(13): 120-124.
138. Fukunaga, M. 1986. Control System for Corresponding to Multi-model Production. IE Review, 27(1).
139. Fukuoka, Y. 1990. The New ALC System at Toyota, in: Fujitsu Co. (ed.) Proceedings of Fujitsu CIM Symposium in Osaka, pp. 44-71.
140. Fukushima, S. 1978. Toyota’s Parts-Integration from Product-Planning Stage. IE, March: 58-63.
141. Furukawa, Y. 1981. System Theory of Quality Control. Operations Research, August: 443-450.
142. Fuse, M., Miyoshi, K., and Higuchi, H. 2000. Line-Company System of Sumitomo Denko, Kojokanri, 46(11).
143. Harazaki, I. 1981. Multi-Functioned Worker Role in Many Varieties, Short-Run Production. Kojokanri, 27(2): 86-87.
144. Hasegawa, M., Tanaka, T., and Sugie, K. 1981. In-Process Quality Control for Each Job Position Realized Zero Delivery Claim at Akashi Kikai Co. Ltd. Kojokanri, 27(1): 15-24.
145. Hashimoto, F. 1981. Assignments to Realize the Unmanned Plant from Software Viewpoints. Kojokanri, 27(4): 6-36.
146. Hatano, T. 1982. Vendor’s Online Delivery System Correspond to the Line Balanced Production. IE, January: 30-34.
147. Hattori, M. 1981. Production System Adaptable to Changes—An Example of Nippon-Denso’s Mixed-Model High-Speed Automatic Assembly Line. IE, January: 22-27.
148. Hayashi, Y. 1987. Ningen Kougaku (Ergonomics). Nihon Kikaku Kyokai.
149. Hino, S. 2002. Research in Toyota Management System, Diamond-sha.
150. Hirano, H. 1983. Why Is the Kanban-MRP Combination Useful Today? Kojokanri, 29(1).
151. Hirano, H. ed. 1990. 5S Guidance Manual, Nikkan-Kogyo Shinbunsha.
152. Hirano, H., ed. 1984. Handbook of Factory Rationalization. Nikkankogyo Shinbun-Sha.
153. Hirano, H. 1989. 100 Q&A for JIT Introduction, Nikkan Kogyo Shinbun.
154. Hitomi, K. 1978. A Consideration of the Toyota Production System. Kojokanri, 26(13): 116-119.
155. Hitomi, K. 1979. GT System for Many Varieties, Short-Run Production. Kojokanri, 25(18): 111-119.
156. Hitomi, K. 1987. Text Book of Production for Many Variety with Short Run. Nikkankogyo Shinbun-Sha.
157. Honda, J. 1988. 5S Animation: Seiri, Seiton, Seiketsu, Seiso, and Shitsuke. Nikkankogyo Shinbun-Sha.
158. Honjo, J. 1988. Toyota’s Marketing Power: Secret of Its Strength. Nisshin-Houdo.
159. Iijima, A. 1981. Implementation of Company-Wide Quality Control at Toyota Auto Body Co., Ltd. Hinshitsukanri, 32(1): 20-26.
160. Ikari, Y. 1981. Comparative Study, Japan’s Automotive Industry—Production Technology of Nine Advanced Companies. Nippon Noritsu Kyokai.
161. Ikari, Y. 1983. Development No. 179—The Road to Corolla. Bungei-Shunjie.
162. Ikari, Y. 1985. Toyota vs. Nissan: The Front of New Car Development. Diamond.
163. Ikeda, M. 1980. Informal History of Toyota—Sakicht, Risaburo, Kiichiro, Ishida, and Kamiya. Sancho Co., Ltd.
164. Imai, K., Itami, H. and Koike, K. 1982. Economics of Internal Organization, Toyo Keizai Shinposha.
165. Inamori, K. 1998. Practical Learning of Kazuo Inamori: Management and Accounting, Nihon Keizai Shinbunsha.
166. Inamori, K. 2006. Amoeba Management, Nihon Keizai Shinbunsha.
167. Ishikawa, K. 1981. Japan’s Quality Control. Nikka Giren.
168. Ishikawa, K. and Isogai, S. 1981. Introduction and Promotion of TQC: Functional Management. Hinshitsukanri, 32(11): 88-96.
169. Ishitsubo, T. 1978. Reduction of the Die-Change Time for the Washer Outside-Frame. Kojokanri, 24(7): 40-44.
170. Itami, H. 1982. Beyond Japanese Management. Toyokeizai Sinpo Sha.
171. Ito, T. 1979. Complete Change in Thinking Lets Arai Seisakusho, Ltd. Promote Production Smoothing. Kojokanri, 25(8): 157-163.
172. Iwai, M. 1981. How the No. 1 Improvement Proposers Are Making Their Ideas. President, December: 146-166.
173. Iwamuro, H. 2002. Cell Production System, Nikkan Kogyo Shinbunsha.
174. Japan Management Association and Monden, Y. 1986. New Edition: Toyota’s Factory Management. Japan Management Association.
175. Just-In-Time Production System Research Workshop, ed. 2004. Just-In-Time Production. Nikkan-Kogyo Shinbunsha.
176. Kanpo. 1982. Questions by Ms. Michiko Tanaka to the Ministers of State. Proceedings of the House of Representatives, no. 4. October 7: 62-66.
177. Katayama, O. 2002. How Did Toyota Cultivate the Strongest Employee? Shodensha.
178. Kato, J. 1982. Introduction of Robotics to the Manufacturing Floor—Japanese Industrial Relations Will Not Break. Nihon Keizai Shinbun, May 3.
179. Kato, N. 1984. Mixed Production of Agricultural Four Wheel Tractor. Kojokanri, 30(11).
180. Kato, T. 1981 and 1982. Revolutional Management of Punchpress Process—From the Introduction of Kanban System to the Scheduling by Microcomputer (1-14). Press Gijutsu, 19(1-2, 4-13); 20(1-3).
181. Kato, T. 1981. New Production Management for the Punchpress Process. IE, December: 77-80.
182. Kawada, S. 2004. Toyota System and Managerial Accounting, Chuoh Keizaisha.
183. Kawaguchi, H. 1980. Visual Control at Toyoda Gosei’s Cutting Operation Process. Kojokanri, 26(13): 26-33.
184. Kawaguchi, H. Basic Promotion Method of Toyota Production System. 1990. In: Chubu Industrial Engineering Association (ed.) Seminar Text of Toyota Production System Practice. November: 11-20.
185. Kawamura, T., Niimi, A., Kubo, S. and Katsuhara, T. (1993). Human-centered design of assembly line in the coming age. Toyota Technical Review, 43(2), 87-91.
186. Kawashima, Y. 1980. Overseas Strategy of Honda, a Pioneer Company Which Extended to America. Kojokanri, 26(7): 40-47.
187. Kestler, A. 1983. Translated by Tanaka, M. and Yashioka, Y. Holonic Revolution. Kosakusha.
188. Kikuchi, H. 1978. Recent Problems Concerning the Subcontract Transactions. Kosei-Torihiki. November: 11-18.
189. Kobayashi, I. 1978. Remarkable Reduction Time and Workforce by Applying the Single-Setup at Machining and Pressing Operations. Kojokanri, 24(7): 45-52.
190. Kohno, T. 1987. Strategy for the New Product Development. Diamond.
191. Kojima, A. 1980. Productivity Arguments in the United States (1 and 2). Nihon Kezai Shinbun, June 10-1.
192. Kojokanri, 1978a. Standard Operations and Process Improvements at Toyoda Gosei Co., Ltd. 24(13): 70-82.
193. Kojokanri. 1978b. Multi-process Holdings at the Casting Processes of Aisin Seiki Co., Ltd. 24(13): 83-88.
194. Kojokanri. 1980. A Case of the Auto-Parts Maker Who Realized Small Lot, Short-Cycle Delivery via MRP. 26(12): 61-67.
195. Kojokanri. 1981a. Production Revolution at Reviving Toyo Kogyo Co., Ltd. 27(6): 17-37.
196. Kojokanri. 1981b. Practices of the Small Lot, Mixed-Model Production System-Seven Cases. 27(7): 17-64.
197. Kojokanri. Special Issue, 1994. This Is the “New” Toyota Production System, Kojokanri, 43(4).
198. Kojokanri. Special Issue, 1995. Production Innovation Movement of All NEC, Kojokanri, 40(14).
199. Kojokanri.Special Issue, 1998. Why Does Single-Person Production System Pay? Kojokanri, 43(4).
200. Kotani, S. 1982. On the Sequencing Problem of the Mixed Model Line. Japan Operations Research Society Spring Conference Proceedings. pp. 149-150.
201. Kotani, S. 2008. Understandable Toyota Production System from Theory to Techniques, Nikkan-Kogyou Shinbunsha.
202. Kotani, S. 2009. “Kaizen Capability” Cultivated by Toyota Production System, Nikkan Kogyo Shinbunsha.
203. Koura, K. 1981. Quality and Economy. Operations Research, August: 437-442.
204. Kubo, N. 1979. Production Control at Yammer Diesel Co., Ltd. Synchronizes with the Master Schedule. Kojokanri, 25(8): 149-156.
205. Kumagai, T. 1978. Characteristics of Toyota Production System. Kojokanri, 24(13): 152-157.
206. Kunitomo, 1985. Kyocera’s Amoeba Management, Paru Shuppan.
207. Kurabayashi, TT. 1988. Line Profit Management of Nagano Kenwood, Kojokanri, 43(4).
208. Kuroiwa, M. 1995. Efforts to Upgrade Parts Distribution Based on the Toyota Production System, ICLS95 B-3, 117-22.
209. Kurokawa, F. 2008. Automobile Industry Strategy of 21st Century, Zeimukeiri Kyoukai.
210. Kuroyanagi, M. 1980. Visual Control of Aisan Kogyo’s Machining Line. Kojokanri, 26(13): 15-25.
211. Kusaba et al. 1981. Report of the 11th Overseas Quality Control Observation Team. (2) Hinshitsukanri. 32(10): 58-64.
212. Maeda, S. 1982. FMS without Failure—A Case of Tokyo Shibaura Electric Co., Ltd. Nihon Keizai Shinbun, August 9.
213. Makido, T. 1979. Recent Tendency of Cost Management Practices in Japan. Kigyo Kaike, March: 126-132.
214. Masuyama, A. 1983. Idea and Practice of Toyota’s FMS. In: Ohno, T. and Monden, Y. (eds.) New Development of Toyota Production System. Japan Management Association. 13-27.
215. Matsumae, H. 1978. Toyota Production System and VE. Kojokanri, 24(13): 149-152.
216. Matsuura, M. 1979. Secret of Toyota’s Sales Power. Sangyo Noritsu Tanki Daigaku Publishing Division.
217. Matsuura, T., Ojima, T., and Ohmori, K. 1978. Single-Setup at Punch Press and Resin-Molding Lines. Kojokanri, 24(7): 53-58.
218. Minato, T. 1984. Japan’s Subcontracting System Is Noticed in Overseas. Nihon-Keizai Shinbun, August 14.
219. Mitsuya, H., Tani, T. and Kagono, T. 1999. Amoeba Management Can Change Your Company, Diamond.
220. Mitsuya, H. 2000. Line-Company System of NEC Saitama, in: Tani, T. and Iwabuchi, Y., Management Accounting of Competitive Excellence, Chuoh Keizaisha, Chapter 14.
221. Monden, Y. 1978. Integrated System of Cost Management. Sangyo Keiri, December: 21-26.
222. Monden, Y. 1985. Toyota System, Kodansha.
223. Monden, Y. 1987. Just In Time: Toyota Production System Going Across the Ocean. Japan Productivity Center.
224. Monden, Y. 1989a. Cases of JIT Production System of Automobile Industry. Japan Management Association.
225. Monden, Y. 1989b. Foundation of Transfer Pricing and Profit Allocation. Dobunkan.
226. Monden, Y. 1991a. Toyota Management System. Japan Management Association.
227. Monden, Y. 1991b. Cost Management of Automobile Companies. Dobunkan.
228. Monden, Y. 1991c. New Toyota System. Kodansha.
229. Monden, Y. 1991d. Development of Transfer Price and Profit Allocation. Dobunkan.
230. Monden, Y. 1991e. Optimize the Small Lot and Frequent Deliveries for Mitigating the Congestion and Drivers’ Shortage, Nihon Keizai Shinbun (Nikkei Economic Journal), August 7: 23.
231. Monden, Y. and Ohno, T. 1983. New Development of Toyota Production System. Japan Management Association.
232. Monden, Y. and Hiraoka, S. 1989. Financial Management of Automobile Company: Case Study of Toyota, Keiei Kodo, 4(1).
233. Monden, Y. 1994. Target Costing and Kaizen Costing for Price Competitiveness, Toyo-Keizai Shinposha.
234. Monden, Y. 2006. Toyota Production System, Diamond.
235. Monden, Y. 2009a. Management Change for Overcoming Depression, Zeimukeiri Kyoukai.
236. Monden, Y. 2009b. Incentive Price (Profit-Allocation Price) for the Inter-Firm Cooperation, Zeimukeiri Kyoukai.
237. Mori, K. 1978. The Negative and the Positive of Toyota Production System for My Standpoint. Kojokanri, 4(13): 145-148.
238. Mori, M. and Yui, N. 1982. Comparison of Production Systems of Japan-U.S. Auto Makers—Productivity Improvement Strategy and System of U.S. Automobile Industry. Kojokanri, 28(8): 17-65.
239. Morimatsu, T. 1988. Setup Improvements, in: Japan Management Association, Seminar Text of Toyota Production System: Its Systematic Examination and Practical Application. October 26-28.
240. Morita, T. 1981. Small Group Activities of Manufacturing Department: Toyota Honsha Plant That Emphasizes Quality Management, Kojokanri, 27(13).
241. Muramatsu, R. 1978. Basic Concepts and Structure of Toyota Production System. Kojokanri, 24(13): 162-165.
242. Muramatsu, R. 1979b. Foundation of Production Control, a New Edition. Kunimoto Shobo.
243. Nagata, T. 1985. Let’s Promote Medical Control of Facilities by Applying 5S, in: Kojokanri Editorial Dept. (ed.) 5S Technique, Kojokanri. 31(11): Special issue, October.
244. Nakai, S. 1978. Toyota’s Unique Vitality and Practicing Ability Developed Its Own System. Kojokanri, 24(13): 158-161.
245. Nakamori, K. 1986. Cost Management at the Design Department (1 and 2). IE, November: 65-70; December: 58-64.
246. Nakane, M. 1981. Mixed-Model Production System at the Body Assembling Line. Kojokanri, 27(7): 59-64.
247. Nakata, I. 1978. Complete Master of the Basic Concepts of Toyota System. Kojokanri, 24(13): 128-130.
248. Nakata, Y. and Monden Y. 1985. Marketing Strategy of Automobile Companies—Theoretical Analysis of Toyota’s Case. Keieikoudo, 4(11): 92-116.
249. Nihon Keizai Shinbun. 1981. Office Rationalization by Applying Kanban. November 7.
250. Nihon Keizai Shinbun. 1982a. Experimentation of Life-Time Employment System—Tentative Agreement between Ford and UAW. February 15.
251. Nihon Keizai Shinbun. 1982b. Teach Me the Kanban System—Request by U.S. Bendix Company to Jidosha Kiki Co., Ltd. March 2.
252. Nihon Keizai Shinbun. 1982c. Shock by the Alliance of Giant Automotive Companies, (1 and 2) March 9-10.
253. Nihon Keizai Shinbun. 1982d. Cooperative Movement in U.S. Industrial Relations Is for Real? June 7.
254. Nihon Keizai Shinbun. 1982e. (News Colloq.) Acceleration to the Effective Management of New Toyota. Mr. Toyoda, President of Toyota Motor Corporation. July 5.
255. Nihon Keizai Shinbun. 1982f. CAD/CAM System of Toyota—Body Development Process. August 5.
256. Nihon-keizai-shinbunsha, ed. 2002. Panasonic: Bet for Revival, Nihon-Keizai-Shinbun-sha.
257. Nikkan Kogyo Shinbun Sha. 1980a. Kojokanri editorial division, ed. Honda’s Small Group Activities. Nikkan Shobo.
258. Nikkan Kogyo Shinbun Sha. 1980b. Business Group for Support of Toyota.
259. Nikko Research Center, ed. 1979. Toyota in the 1980s—Its Growth Strategy Invested by Analysts. Nihon Keizai Shinbun Sha.
260. Nikkei Business. 1996. Line-Company System of NEC (November 4, No. 864).
261. Nishibori, E. 1985. Morale Must Come Out from the Bottom of Heart, in: Kojokanri Editorial Dept. (ed.) 5S Technique, Kojokanri, 31(11): 92-116.
262. Nissan Motor Company. 1981. Annual Report (Financial Security Report). 1991 March. Ministry of Finance, July.
263. Noboru, Y. and Monden, Y. 1983. Total Cost Management in Japanese Auto Industry. Kigyo Kaikei. February, 35(2): 104-112.
264. Noboru, Y. and Monden, Y. 1988. Cost Management of an Automobile Company: Daihatsu Motor, in: Okamoto, K., Miyamoto, M., and Sakurai, M. (eds.) High Tech Accounting. Doyukan.
265. Noguchi, H. 1994. Toyota Motor Kyushu: Miyata Plant, Kojokanri, 40(11).
266. Noguchi, H. 1994. Functional Split Assembly-Line of Toyota Motomachi Plant That Realized Co-existence of Human and Machine, Kojokanri, 40(11).
267. Noguchi, H. 1995. Challenge of NEC Nagano That Achieved Production Innovation Based on Its Business Crisis, Kojokanri, 40(14).
268. Noguchi, H. 2005. New Systems Installed in the Mixed-Model Assembly Line at Toyota Tsutsumi Plant, Kojokanri, 51(1) 16−33.
269. Ochiai, T. 1991. Automobile Sequence Scheduling for the Assembly Line by Use of AI. Handout presented at the seminar of Japan Industrial Management Association, February 9.
270. Ohno, T. 1978. Toyota Production System, Diamond.
271. Ohno, T. 1982. Field Management by Taiichi Ohno, Japan Management Association.
272. Ohno, T. 1990. Multi-process Holding Is an Effective Method for Preventing Overproduction. Kojokanri, 36(9).
273. Ohno, T. and Monden, Y., eds. 1983. New Development of Toyota Production System. Japan Management Association.
274. Ohno, T. and Monden, Y. 1978a. Companies Gap Will Be Determined by the Productivity Gap When the Quantity Decreases. IE, March: 4-9.
275. Ohno, T. and Monden, Y. 1978b. Toyota Production System—Beyond Management of Large Scale Production. Diamond.
276. Ohsai, T. 2004. Reformation of Economy by Each Functional Unit, Nihon-Keizai-Shinbun, May 17.
277. Ohshima, K. 1984. Japan-U.S. Automobile Conflict—Investigation for the Strategy of Coexistence. Nihon-Keizai-Shinbun-Sha.
278. Okada, Y. and Sasaki, T. 1986. Practice of Production Information Management at Matsuda. JMA Production Management, July.
279. Okamura, M. 1979. Toyota’s Energy Conservation Prevailing throughout the Shop Floor. IE, September: 18-24.
280. Okano, M. and Yamamoto, K. 1986. New Technology of Assembly, Machining, and Inspection Systems, in: Watanabe, S. and Akiyama, Y. (eds.) Production System and New Automation Technology. Nikkan-Kogyo Shinbun-sha. 167-190.
281. Ozaki, R. and Morita, T. 1979. TQC and Toyota Production System Applied Together to the Production Control of Akashi Kikai Co., Ltd. Kojokanri, 25(8): 174-181.
282. Ryokaku, T. 1990. How the New Model Will Be Developed—Case Study of Celica. Motor Fan, Vol. 33, January.
283. Saito, S. 1978. Secret of Toyota Kanban System. Kou Shobo.
284. Satake, H. 1998. Toyota Production System: Its Emergence, Development and Changes, Toyokeizai Shinposha.
285. Sekine, K. 1978a. Steps toward Single-Setup: Procedures and Practices for Reducing the Setup Time in Half. Kojokanri, 24(7): 59-64.
286. Sekine, K. 1978b. Toyota Kanban System, the Practical Manual. Kojokanri, 24(13): 2-52.
287. Sekine, K. 1981. Practical Toyota Kanban System—How to Make a Profit by Eliminating Waste. Nikkan Shobo.
288. Senju, S., Kawase, T., Sakuma A., Nakamura, Z. and Yata, H. 1987. Motion Study: Determinate Edition. JIS.
289. Shibata, F., Imayoshi, K., Eri, Y. and Ogata, S. 1993. Development of Quantitative Evaluation Method, TVAL, for Assembly Workload. Toyota Technical Review, 43(1), pp. 84-89.
290. Shibata, Y. and Hasegawa, N. 1981. Software Package for Support of Kanban, New Production Control System at Kyoho Seisaku Co., Ltd. Kojokanri, 27(4): 17-25.
291. Shimada, H. 1981. U.S. Industry Is Enthusiastic about Its Restoration Efforts for Improving the Quality of Labor. Nihon Keizai Shinbun, October 26.
292. Shimada, H. 1984. Changing Labor Union of America: New Labor Contract in Automobile Industry. Nihon-Keiai-Shinbun, December 11.
293. Shimokawa, K., Fujimoto, T., Kuwashima, K. and Shimayama, Y. 2001. What I Learned from Mr. Taiichi Ohno: Oral Interview Document of Mr. Michikazu Tanaka, Former President of Daihatu Motor, in Shimokawa, K. and Fujimoto, T., Eds. 2001. Origins and Evolution talked by Key Persons, Chapter 3, 21-57.
294. Shimokawa, K. and Fujimoto, T. 2001. Origin of Toyota System, Bunshindo.
295. Shimokawa, K. 2009. Is There Any Prospective Future in the Automobile Business? Takarajima-sha.
296. Shingo, S., et al. 1978a. Single-Setup Will Change the Business Constitution. Kojokanri, 24(7): 1978a, 20-24.
297. Shingo, S. 1978b. Revolution of Setup Time Development to the Single-Setup. Kojokanri, 24(7): 20-24.
298. Shingo, S. 1980. Study of Toyota Production System from Industrial Engineering Viewpoint— Development to the Non-Stock Production. Nikkan Kogyo Shinbun Sha.
299. Shinozawa, S. 1987. Toyota’s Chief-Engineer System of Automobile Development. Kodansha.
300. Shioka, K. 1978. Toyota Production System and Work. Kojokanri, 24(13): 124-127.
301. Shishido, T. and Nikko Research Center, eds. 1980. Japanese Companies in USA—Investiga-tion in the Possibility of Japanese-Style Management. Toyokeizai Shinpo Sha.
302. Shomura, O. 1981. Contemporary Auto Workers and Their Job Discontent—An Examination of the International Comparative Study by William H. Form. Rokkodai Ronshu, 28(2): 90-106.
303. Shukan-Diamond. 2003. Panasonic: Revolution 1000 Days, Vol. 91, No. 10, March 8, 28-47.
304. Shukan Toyokeizai. 1982. Toyota Kanban System Greets the New Stage, in: The Toyota in 1990. (Extra issue) July 1: 21-25.
305. Soukura, T. 1987. Setup-Time Reduction of Tandem-Press, in: Setup-Time Improvement Manual. Kojokanri, August, special issue, pp. 82-93.
306. Sugiyama, T. 1985. Floor Improvement Should Begin with 5S Application, in: Kojokanri Editorial Dep. (ed.), 5S Technique, Kojokanri, special issue, 31(11): 38-67.
307. Suitsu, K. 1978. What We Learn from the Toyota Production System. Kojokanri, 24(13): 89-101.
308. Suitsu, K. 1979. Eight Articles of Basic Knowledge for Introducing the Toyota Production System. Kojokanri, 25(8): 202-220.
309. Suzuki, Y. 1980. Multi-functioned Worker and Job-Rotation Can Make Flexible Workshop. IE, May: 22-28.
310. Tagiri, I. 1981. “The Vitalities” Are Making Lively Activities around Mr. H.—A Case of Toyota’s QC Circle. Kojokanri, 27(13): 139-144.
311. Takahashi, M., Kondo, J. and Tsuihiji, T. 1981. Fuji Heavy Industries, Ltd.—The Present Condition and Purpose of the Automation at Its Body Welding Plant. Kojokanri, 27(4): 37-45.
312. Takahashi, M. and Kondo, J. 1981. Microcomputer Aided Lamprey Type, Model Discriminating System for Supporting the Flexibility of Mixed-Model Production. IE, February: 28-30.
313. Takahashi, H. and Kubota, H. 1990. Assembly Line Control (ALC) System, in: Tokyo Management Association, Seminar Text of Toyota Production System, December 12: 1-16.
314. Takahashi, Y. 1989. Mixed Production of Tractor Plant. Kojokanri, 35(1).
315. Takano, I. 1978. Complete Information of the Toyota Group. Nippon Jitsugyo.
316. Takao, T. 1990. Toyota’s Kaizen Budget: Original Feature of Japanese Style Budgeting. Kigyokaikei, 42(3).
317. Takeshita, S. and Mori, M. 1983. New Production Control System PYMAC of Yamaha, Kojokanri, 29(1).
318. Takeuchi, T. 1986. Automobile Sales. Nihon-Keizai-Shinbun-Sha.
319. Tanaka, H. 1978. Employment Conventions in Japan and U.S. Nihon Seisansei Honbu (Japan Productivity Center).
320. Terayama, S. 1989. Can Toyota Overcome a Large Company Sickness of Demeritmark System? Nikkei-Business, October 9.
321. Toda, M. 2006. Toyota Information Systems Supporting the Toyota Way, Nikkankogyou-Sinbun.
322. Tohno, H. 1978. Toyota System Lets Today’s Production Follow Yesterday’s Sales. Kojokanri, 24(13): 134-136.
323. Tokyo Shibaura Electric Co., Ltd., ed. 1977. Promotion of Management by Objective. Aoba Shuppan.
324. Tonouch Kogyo PCS Group. 1980. Computer-Aided Dispatching for the Mixed Body-Models at an Assembly Painting Maker. Kojokanri, 26(12): 68-72.
325. Toyota Motor Corporation. 1987. Unlimited Creation: 50 Year History of Toyota. Toyota Motor Corp.
326. Toyota Motor Corporation. 1987. Unlimited Creation: 50 Year History of Toyota Materials. Toyota Motor Corp.
327. Toyota Motor Corporation. 1991. Annual Report (Financial Security Report): June 1991. Ministry of Finance.
328. Toyota Motor Co., Ltd. 1964. Suggestion Committee Office, ed. Manual of Suggestion System.
329. Toyota Motor Co., Ltd. 1966. QC Promoting Office. Promotion of Quality Control at Toyota Motor Co., Ltd. Hinshitsukanri, 17(1): 14-17.
330. Toyota Motor Co., Ltd. 1973. Toyota Production System for Cost Reduction (unpublished), 1st and 2nd Editions (1975).
331. Urabe, K. 1984. Japanese Style Management Can Evolve. Chuo-Keizaisha.
332. Wada, R. 1979. Machining Automation in the Flexible Manufacturing System. Kojokanri, 25(8): 29-41.
333. Washida, A. 1978. A Commitment on the Toyota Manufacturing Methods. Kojokanri, 24(13): 131-134.
334. Yamada, Y. 1979. Points of Community and Difference between MRP and Toyota Production System. Kojokanri, 25(8): 96-110.
335. Yasuda, Y. 1989. Suggestion Activities of Toyota. Japan Management Association.
336. Yonezawa, N. 1983. Subcontractors under Their Reorganization in Industry. Nihon-Keizai-Shinbun. May 24.
337. Yoshikawa, A. and Minato, A. 1980. Total Optimization by Integrating the Design and Manufacturing Technologies. IE, April: 20-22.
338. Yoshimura, M., Miyamoto, T. and Hori, E. 1982. Optimal Sequencing Algorithm for the Assembly Line of the Medium Variety-Medium Quantity Models, in: Japan Operations Research Society (ed.) Proceedings of Abstracts of 1982 Spring Research Conference, pp. 147-148.
339. Yoshiya, R. 1979. Management Revolution by Means of MRP. Diamond Harvard Business. March-April:85-90.
340. Yoshiya, R. and Nakane, J. 1977. MRP System—New Production Control in the Computer Age. Nikkan Kogyo Shinbuh Sha.
341. Yoshiya, R. and Nakane, J. 1978. Toyota Production System Viewed from the Standpoint of the MRP System Researchers. Kojokanri, 24(13): 102-108.
342. Yutani, M. 1990. Reduction of Set-Up Time, in: Tokyo Management Association (ed.) Seminar Text of Toyota Production System (unpublished).