Fluid Friction and Heat Transfer in Microchannels

Microfluidics and Nanofluidics Handbook: Fabrication, Implementation, and Applications

Volumn , Issue , 2011, Pages 477-609

  Muzychka, Y S ^a   Duan, Z P ^b   Yovanovich, M M ^b  

^a MEMORIAL UNIVERSITY OF NEWFOUNDLAND   (Canada)

^b UNIVERSITY OF WATERLOO   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85133038775     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (115)

1. Ahmed S, Brundrett E. (1971). Characteristic lengths for non-circular ducts. Int J Heat Mass Transf. 14:157-9.
2. Arkilic EB, Breuer KS, Schmidt MA. (1997). Gaseous slip flow in long microchannels. J Microelectromech Syst. 6:167-78.
3. Arpaci VS, Larsen PS. (1984). Convection Heat Transfer. Englewood Cliffs (NJ): Prentice-Hall.
4. Asako Y, Nakamura H, Faghri M. (1988). Developing laminar flow and heat transfer in the entrance region of regular polygonal ducts. Int J Heat Mass Transf. 31:2590-3.
5. Avci A, Karagoz I. (2009). A novel explicit equation for friction factor in smooth and rough pipes. J Fluids Eng. 131(6):061203.
6. Azimain AR, Sefid M. (2004). Performance of microchannel heat sinks with Newtonian and non-Newtonian fluids. Heat Transf Eng. 25(8):17-27.
7. Baehr H, Stephan K. (1998). Heat Transfer. New York: Springer-Verlag.
8. Bahrami M, Yovanovich MM, Culham JR. (2006). Pressure drop of fully developed, laminar flow in microchannel of arbitrary cross-section. J Fluids Eng. 128:1036-44.
9. Bahrami M, Yovanovich MM, Culham JR. (2007). A novel solution for pressure drop in singly connected microchannels of arbitrary cross-section. Int J Heat Mass Transf. 50:2492-502.
10. Baird E, Mohensi K. (2008). Digitized heat transfer: a new paradigm for thermal management of compact micro systems. IEEE Trans Compon Packaging Technol. 31(1):143-51.
11. Bandopadhayay PC, Ambrose CW. (1980). A generalized length dimension for non-circular ducts. Lett Heat Mass Transf. 7:323-8.
12. Barber RW, Emerson DR. (2001). A numerical investigation of low reynolds number gaseous slip flow at the entrance of circular and parallel plate microchannels. ECCOMAS Computational Fluid Dynamics Conference, Swansea, Wales, UK.
13. Barr DIH. (1972). New forms of equations for the correlation of pipe resistance data. Proc Inst Civil Eng. 53(2):383-90.
14. Bejan A. (2000). Shape and Structure: From Engineering to Nature. Cambridge: Cambridge University Press.
15. Bejan A. (2005). Convection Heat Transfer. 3rd ed. New York: Wiley.
16. Bejan A, Kraus AD. (2004). Heat Transfer Handbook. New York: Wiley.
17. Bender E. (1969). Druckverlust bei Laminarer Stromung im Rohreinlauf. Chem Ing Tech. 41:682-6.
18. Bhatti MS, Shah RK. (1987). Turbulent and transition flow convective heat transfer in ducts. In: Handbook of Single-phase Convective Heat Transfer. New York: Wiley.
19. Bird RB, Stewart WE, Lightfoot EN. (1960). Transport Phenomena. New York: Wiley.
20. Blasius H. (1913). Das Ahnlichkeitsgesetz bei Reibungsvorgangen in Flussigkeiten. Forschungsheft. 131.
21. Burmeister LC. (1993). Convective Heat Transfer. New York: Wiley.
22. Carlson LW, Irvine TF. (1961). Fully developed pressure drop in triangular shaped ducts. J Heat Transf. 83:441-4.
23. Chen NH. (1979). An explicit equation for friction factor in pipe. Ind Eng Chem Fundamen. 18:296-7.
24. Chhabra RP, Richardson JF. (1999). Non-Newtonian Flow in the Process Industries. Boston: Butterworth-Heinemann.
25. Churchill SW. (1987). Viscous Flows: The Practical Use of Theory. Boston: Butterworth-Heinemann.
26. Churchill SW, Ozoe H. (1973a). Correlations for laminar forced convection with uniform heating in flow over a plate and in developing and fully developed flow in a tube. J Heat Transf. 95:78-84.
27. Churchill SW, Ozoe H. (1973b). Correlations for laminar forced convection in flow over an isothermal flat plate and in developing and fully developed flow in an isothermal tube. J Heat Transf. 95:416-9.
28. Churchill SW, Usagi R. (1972). A general expression for the correlation of rates of transfer and other phenomena. AIChE J. 18:1121-8.
29. Colebrook CR. (1939). Turbulent flow in pipes with particular reference to the transition region between smooth and rough pipe laws. J Inst Civ Eng. 11:133-56.
30. Corless RM, Gonnet GH, Hare DE, Jeffrey DJ, Knuth DE. (1996). On the Lambert W function. Adv Comput Math. 5:329-59.
31. Drew TB. (1931). Mathematical attacks on forced convection problems: a review. Trans Am Inst Chem Eng. 26:26-80.
32. Duan ZP. (2007). Analysis of slip flow in microchannels [dissertation]. St. Johns (Newfoundland): Memorial University of Newfoundland.
33. Duan ZP, Muzychka YS. (2006). Slip flow in elliptic microchannels. Int J Therm Sci. 46:1104-11.
34. Duan ZP, Muzychka YS. (2007a). Slip flow in non-circular microchannels. Microfluid Nanofluidics. 3(4):473-84.
35. Duan ZP, Muzychka YS. (2007b). Models for gaseous slip flow in non-circular microchannels. Proceedings of ASME-JSME Thermal Engineering Summer Heat Transfer Conference, 2007 July 8-12; Vancouver, Canada.
36. Duan ZP, Muzychka YS. (2010). Slip flow in the hydrodynamic entrance region of circular and noncircular microchannels. J Fluids Eng. 132(1):011201.
37. Duan ZP, Yovanovich MM. (2009a). Pressure drop for laminar flow in microchannels of arbitrary cross-sections. IEEE 25 SEMI-THERM Symposium; 2009 March 15-19; San Jose, CA.
38. Duan ZP, Yovanovich MM. (2009b). A compact model for gaseous slip flow in non-circular microchannels. Nanoscale Microscale Thermophys Eng. Forthcoming.
39. Duan ZP, Yovanovich MM, Muzychka YS. (2009). Pressure drop for fully developed turbulent flow in smooth and rough non-circular ducts. J Fluids Eng. Under review.
40. Ebadian MA, Dong ZF. (1999). Forced convection, internal flow in ducts. In: Handbook of Heat Transfer. New York: McGraw-Hill.
41. Ebert WA, Sparrow EM. (1965). Slip flow in rectangular and annular ducts. J Basic Eng. 87:1018-24.
42. Eckert ERG, Drake RM. (1972). Analysis of Heat and Mass Transfer. New York: McGraw-Hill.
43. Filonenko GK. (1954). Hydraulic resistance in pipes. Teploenergetika. 1:40-4.
44. Gao SX, Hartnett JP. (1993). Analytical Nusselt number predictions for slug flow in rectangular duct. Int Commun Heat Mass Transf. 20:751-60.
45. Garimella S, Dowling WJ, Van derVeen M, Killion J. (2000). Heat transfer coefficients for simultaneously developing flow in rectangular tubes. Proceedings of the 2000 International Mechanical Engineering Congress and Exposition, Vol. 2; pp. 3-11.
46. Goudar CT, Sonnad JR. (2003). Explicit friction factor correlation for turbulent flow in smooth pipes. Ind Eng Chem Res. 42:2878-80.
47. Grober H, Erk S, Grigull U. (1961). Fundamentals of Heat Transfer. New York: McGraw-Hill.
48. Haaland SE. (1983). Simple and explicit formulas for the friction factor in turbulent pipe flow. J Fluid Eng. 105:89-90.
49. Hausen H. (1943). VDI Beih. Verfahrenstech. 4:91.
50. Hodge RI. (1961). Frictional pressure drop in non-circular ducts. J Heat Transf. 83:384-5.
51. Jakob M. (1949). Heat Transfer. Vol. 1. New York: Wiley.
52. Jones OC. (1976). An improvement in the calculation of turbulent friction in rectangular ducts. J Fluids Eng. 98:173-81.
53. Kakac S, Yener Y. (1983). Laminar forced convection in the combined entrance region of ducts. In: Kakac S, Shah RK, Bergles AE, editors. Low Reynolds Number Heat Exchangers. Washington: Hemisphere Publishing; pp. 165-204.
54. Kakac S, Shah RK, Aung W, editors. (1987). Handbook of Single Phase Convective Heat Transfer. New York: Wiley.
55. Karman T. (1934). Turbulence and skin friction. J Aeronauti Sci. 1(1):1.
56. Karniadakis GE, Beskok A, Aluru N. (2005). Microflows and Nanoflows. New York: Springer.
57. Kays WM. (1955). Numerical solutions for laminar flow heat transfer in circular tubes. Trans ASME. 77:1265-74.
58. Kays WM. (1966). Convective Heat and Mass Transfer. New York: McGraw-Hill.
59. Kays WM, Crawford ME. (1993). Convective Heat and Mass Transfer. New York: McGraw-Hill.
60. Kennard EH. (1938). Kinetic Theory of Gases. New York: McGraw-Hill.
61. Knudsen JG, Katz DL. (1958). Fluid Dynamics and Heat Transfer. New York: McGraw-Hill.
62. Koo J, Kleinstreuer C. (2003). Liquid flow in microchannels: experimental observations and computational analyses of microfluidic effects. J Micromech Microeng. 13:568-79.
63. Kozicki W, Tiu C. (1968). Geometric parameters for some flow channels. Can J Chem Eng. 46:389-93.
64. Kozicki W, Tiu C. (1971). Improved parametric characterization of flow geometries. Can J Chem Eng. 49:562-9.
65. Kozicki W, Chou CH, Tiu C. (1966). Non-Newtonian flow in ducts of arbitrary cross-sectional shape. Chem Eng Sci. 21:665-79.
66. Kreith F. (1965). Principles of Heat Transfer. 2nd ed. Scranton (PA): International Textbook Co.
67. McKeon BJ, Zagarola MV, Smits AJ. (2005). A new friction factor relationship for fully developed pipe flow, J Fluid Mech. 38:429-43.
68. Morini GL, Lorenzini M, Spiga M. (2005). A criterion for experimental validation of slip flow models for incompressible rarefied gases through micro-channels. Microfluid Nanofluidics. 1:190-6.
69. Muzychka YS. (1999). Analytical and experimental study of fluid friction and heat transfer in low reynolds number flow heat exchangers [dissertation]. Waterloo (Ontario): University of Waterloo.
70. Muzychka YS, Edge J. (2008). Laminar non-Newtonian fluid flow in non-circular ducts and microchannels. J Fluids Eng. 130:111201-1-7.
71. Muzychka YS, Yovanovich MM. (1998a). Modeling Nusselt numbers for thermally developing laminar flow in non-circular ducts. AIAA Paper 98-2586, 7th AIAA/ASME Joint Thermophysics and Heat Transfer Conference; 1998 June 15-18; Albuquerque, NM.
72. Muzychka YS, Yovanovich MM. (1998b). Modelling friction factors in non-circular ducts for developing laminar flow. AIAA Paper 98-2492, 2nd AIAA Theoretical Fluid Mechanics Meeting; 1998 June 15-18; Albuquerque, NM.
73. Muzychka YS, Yovanovich MM. (2002a). Laminar flow friction and heat transfer in non-circular ducts and channels: Part I. Hydrodynamic problem. In: Clelata GP, Thonon B, Bontemps A, Kandlikar S, editors. Compact Heat Exchangers: A Festschrift on the 60th Birthday of Ramesh K. Shah. Grenoble (France): Edizioni ETS; pp. 123-30.
74. Muzychka YS, Yovanovich MM. (2002b). Laminar flow friction and heat transfer in non-circular ducts: Part II. Thermal problem. In: Celata GP, Thonon B, Bontemps A, Kandlikar S, editors. Compact Heat Exchangers-A Festschrift on the 60th Birthday of Ramesh K. Shah. Grenoble: Edizioni ETS; pp. 131-8.
75. Muzychka YS, Yovanovich MM. (2004). Laminar forced convection heat transfer in combined entrance region of non-circular ducts. J Heat Transf. 126:54-61.
76. Muzychka YS, Yovanovich MM. (2009). Pressure drop in laminar developing flow in non-circular ducts: a scaling and modeling approach. J Fluids Eng. 131:111105.
77. Muzychka YS, Walsh EJ, Walsh P. (2009). Heat transfer enhancement using segmented gas-liquid laminar fluid streams. InterPack 2009; 2009 July 19-23; San Francisco, CA.
78. Muzychka YS, Walsh EJ, Walsh P. (2010). Simple models for predicting heat transfer in laminar thermally developing slug flows. ASME J Heat Transf. 132:111702-1-10.
79. Nan SF, Dou M. (2000). A method of correlating fully developed turbulent friction in triangular ducts. J Fluid Eng. 122:634-6.
80. Niazmand H, Renksizbulut M, Saeedi E. (2009). Developing slip flow and heat transfer in trapezoidal micro-channels. Int J Heat Mass Transf. 51:6126-35.
81. Nikuradse J. (1930). Untersuchungen uber Turbulent Stromung in Nicht Kreisformigen Rohren. Ing Arch. 1:306-32.
82. Nikuradse J. (1932). Gesetzmässigkeiten der turbulenten Strömung in glatten Rohren. VDI Forshungsheft. 356.
83. Obot NT, Adu-Wusu K. (1985). The flow pattern in a scalene triangular duct having two rounded corners. J Fluid Eng. 107:455-9.
84. Pai S-I. (1957). Viscous Flow Theory: II. Turbulent Flow. New York: Van Nostrand Company.
85. Pong K, Ho C, Liu J, Tai Y. (1994). Nonlinear pressure distribution in uniform microchannels. ASME Application of Microfabrication to Fluid Mechanics, Vol. FED-197; pp. 51-6.
86. Prandtl L. (1952). Essentials of Fluid Dynamics. New York: Hafner Publishing Company.
87. Renksizbulut M, Niazmand H, Tercan G. (2006). Slip flow and heat transfer in rectangular microchannels with constant wall temperature. Int J Therm Sci. 45:870-81.
88. Rohsenow WM, Choi HY. (1961). Heat, Mass, and Momentum Transfer. New Jersey: Prentice-Hall Inc.
89. Rohsenow WM, Hartnett JP, Cho YI, editors. (1999). Handbook of Heat Transfer. New York: McGraw-Hill.
90. Round GF. (1980). An explicit approximation for the friction factor reynolds number relation for rough and smooth pipes. Can J Chem Eng. 58:122-3.
91. Rouse H. (1961). Fluid Mechanics for Hydraulic Engineers. New York: Dover Publications.
92. Schaaf SA, Chambre PL. (1961). Flow of Rarefied Gases. New Jersey: Princeton University Press.
93. Schiller L. (1923). Uber den Stromungswiderstand von Rohrenverschiedenen Querschitts und Rauhigkeitsgrades. Z Angew Math Mech. 3:2-13.
94. Schlichting H. (1979). Boundary Layer Theory. New York: McGraw-Hill.
95. Serghides TK. (1984). Estimate friction factor accurately. Chem Eng. 91:63-4.
96. Shah RK. (1978). A Correlation for laminar hydrodynamic entry length solutions for circular and non-circular ducts. J Fluids Eng. 100:177-9.
97. Shah RK, Bhatti MS. (1987). Laminar convective heat transfer in ducts. In: Kakac S, Shah RK, Aung W, editors. Handbook of Single Phase Convective Heat Transfer. New York: Wiley.
98. Shah RK, London AL. (1978). Laminar Flow Forced Convection in Ducts. New York: Academic Press.
99. Shapiro AH, Siegel R, Kline SJ. (1954). Friction factor in the laminar entry region of a smooth tube. Proceedings of the 2nd U.S. National Congress of Applied Mechanics; pp. 733-41.
100. Siegel R. (1953). The effect of heating on boundary layer transition for liquid flow in a tube [ScD thesis]. Cambridge: Massachusetts Institute of Technology.
101. Skelland AHP. (1967). Non-Newtonian Flow and Heat Transfer. New York: Wiley.
102. Sparrow EM. (1955). Analysis of laminar forced convection heat transfer in entrance region of flat rectangular ducts. Washington, DC: NACA.
103. Sparrow EM. (1962). Laminar flow in isosceles triangular ducts. AIChE J. 8:599-604.
104. Sparrow EM, Lundgren TS, Lin SH. (1962). Slip flow in the entrance region of a parallel plate channel. Proceedings of the Heat Transfer and Fluid Mechanics Institute, Stanford University Press; pp. 223-38.
105. Stephan K. (1959). Warmeubergang und Druckabfall bei Nicht Ausgebildeter Laminar Stromung in Rohren und in Ebenen Spalten. Chem Ing Tech. 31:773-8.
106. Swamee PK, Jain AK. (1976). Explicit equations for pipe flow problems. J Hydraul Div. 102:657-64.
107. Targ SM. (1951). Osnovnye Zadachi Teorii Laminarykh Techenyi. Moscow.
108. Techo R, Tickner RR, James RE. (1965). An accurate equation for the computation of the friction factor for smooth pipes from the Reynolds number. J Appl Mech. 32:443-6.
109. Thiart GD. (1990). Exact solution for slug flow laminar heat transfer development in a rectangular duct with isothermal walls. J Heat Transf. 112:499-501.
110. Wood DJ. (1966). An explicit friction factor relationship. Civ Eng. 36:60-1.
111. Yilmaz T. (1990). General equations for pressure drop for laminar flow in ducts of arbitrary cross sections. J Energy Resour Technol. 112:220-3.
112. Yilmaz T, Cihan E. (1993). General equation for heat transfer for laminar flow in ducts of arbitrary cross-sections. Int J Heat Mass Transf. 36:3265-70.
113. Yilmaz T, Cihan E. (1995). An equation for laminar flow heat transfer for constant heat flux boundary condition in ducts of arbitrary cross-sectional area. J Heat Transf. 117:765-6.
114. Yovanovich MM, Muzychka YS. (1997). Solutions of Poisson equation within singly and doubly connected domains. AIAA 97-3880, 1997 National Heat Transfer Conference; 1997 August 10-12; Baltimore MD.
115. Zigrang DJ, Sylvester ND. (1982). Explicit approximation to the solution of Colebrook friction factor equation. AIChE J. 28:514-5.