Faults in induction and synchronous motors

Electric Machines: Modeling, Condition Monitoring, and Fault Diagnosis

Volumn , Issue , 2017, Pages 9-26

  Akin, Bilal ^a   Rahimian, Mina M ^b  

^a TEXAS INSTRUMENTS   (United States)

^b TEXAS A AND M UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85132513844     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (61)

1. S. Nandi, H.A. Toliyat, and X. Li, "Condition monitoring and fault diagnosis of electrical machines-A review," IEEE Transactions on Energy Conversion, vol. 20, no. 4, pp. 719-729, December 2005.
2. A. Siddique, G.S. Yadava, and B. Singh, "A review of stator fault monitoring techniques of induction motors," IEEE Transactions on Energy Conversion, vol. 20, pp. 106-114, March 2005.
3. M. El Hachemi Benbouzid, "A review of induction motors signature analysis as a medium for faults detection," IEEE Transactions on Industrial Electronics, vol. 47, pp. 984-993, October 2000.
4. Y.E. Zhongming and W.U. Bin, "A review on induction motor online fault diagnosis," IEEE IPEMC'00, vol. 3, pp. 1353-1358, 2000.
5. W. Zhou, T.G. Habetler, and R.G. Harley, "Incipient bearing fault detection via motor stator current noise cancellation using Wiener Filter," IEEE Transactions on Industrial Application, vol. 45, pp. 1309-1317, July/August 2009.
6. W. Zhou, T.G. Habetler, and R.G. Harley, "Bearing fault detection via stator current noise cancellation and statistical control," IEEE Transactions on Industrial Electronics, vol. 55, no. 12, pp. 4260-4469, December 2008.
7. J. Liu, W. Wang, and F. Golnaraghi, "An extended wavelet spectrum for bearing fault diagnostics," IEEE Transactions on Instrumentation and Measurement, vol. 57, pp. 2801-2812, December 2008.
8. S.M.A. Cruz, H.A. Toliyat, and A.J.M. Cardoso, "DSP implementation of the multiple reference frames theory for the diagnosis of stator faults in a DTC induction motor drive," IEEE Transactions on Energy Conversion, vol. 20, no. 2, pp. 329-335, June 2005.
9. D. Shah, S. Nandi, and P. Neti, "Stator inter-turn fault detection of doubly-fed induction generators using rotor current and search coil voltage signature analysis," IEEE Transactions on Industry Applications, vol. 45, no. 5, pp. 1831-1842, September-October 2009.
10. R. Schoen, T. Habetler, F. Kamran, and R. Bartfield, "Motor bearing damage detection using stator current monitoring," IEEE Transactions on Industry Applications, vol. 31, no. 6, pp. 1274-1279, November/December 1995.
11. L. Eren, "Bearing Damage Detection via Wavelet Package Decomposition of Stator Current," PhD dissertation, School of Electrical Engineering, University of Missouri-Columbia, 2002.
12. J. Ilonen, J.-K. Kamarainen, T. Lindh, J. Ahola, H. Kälviäinen, and J. Partanen, "Diagnosis tool for motor condition monitoring," IEEE Transactions on Industry Applications, vol. 41, pp. 963-971, April 2005.
13. R.R. Schoen, B.K. Lin, F.G. Habetter, H.J. Shlog, and S. Farag, "An unsupervised on-line system for induction motor fault detection using stator current monitoring," IEEE Transactions on Industry Applications, vol. 31, no. 6, pp. 1280-1286, November/December 2005.
14. J.R. Stack, R.G. Harley, and T.G. Habetler, "An amplitude modulation detector for fault diagnosis in rolling element bearings," IEEE Transactions on Industrial Electronics, vol. 51, no. 5, pp. 1097-1102, October 2005.
15. H. Ocak, "Fault Detection, Diagnosis and Prognosis of Rolling Element Bearings: Frequency Domain Methods and Hidden Markov Modeling," PhD dissertation, School of Electrical Engineering, Case Western Reserve University, Cleveland, OH, 2004.
16. B. Yazici and G.B. Kliman, "An adaptive statistical time-frequency method for detection of broken bars and bearing faults in motors using stator current," IEEE Transactions on Industry Applications, vol. 35, no. 2, pp. 442-452, March 1999.
17. S. Nandi, H. Toliyat, and X. Li, "Condition monitoring and fault diagnosis of electrical motors-A review," IEEE Transactions on Energy Conversions, vol. 20, no. 4, pp. 719-729, December 2005.
18. A.V. Oppenheim and R.W. Schafer, Discrete-Time Signal Processing, New York: Prentice-Hall, 1989.
19. G. Stone and J. Kapler, "Stator winding monitoring," IEEE Industry Applications Magazine, September/October 1998.
20. E.L. Brancato, "Insulation aging," IEEE Transactions on Dielectrics and Electrical Insulation, vol. EI-13, no. 4, August 1978.
21. Handbook to Assess Stator Insulation Mechanism, EPRI EL-5036, vol. 16, New York: Power Plant Electrical Reference Series.
22. J. Douglas, "Hydro generator failure," IEEE Power Engineering Review, vol. 8, no. 11, pp. 4-6, November 1988.
23. G. Stone, S. Campbell, and S. Tetreault, "Inverter-fed drives: Which motor stators are at risk," IEEE Industry Application Magazine, vol. 6, pp. 17-22, September/ October 2000.
24. B. Fernando, "Online stator winding fault diagnosis in inverter-fed AC machines using high-frequency signal injection," IEEE Transactions on Industry Application, vol. 39, no. 4, pp. 1109-1117, August 2003.
25. S. Lee and G.B. Kliman, "An online technique for monitoring the insulation condition of ac machine stator windings," IEEE Transactions on Energy Conversions, vol. 20, no. 4, pp. 737-745, December 2005.
26. G.C. Stone, "Advancements during the past quarter century in on-line monitoring of motor and generator winding insulation," IEEE Transactions on Dielectrics and Electrical Insulation, vol. 9, no. 5, pp. 746-751, October 2002.
27. F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, "AI techniques in induction machines diagnosis including the speed ripple effect," IEEE Transactions on Industry Applications, vol. 34, pp. 98-108, 1998.
28. G.B. Kliman, R.A. Koegl, J. Stein, R.D. Endicott, and M.W. Madden, "Noninvasive detection of broken rotor bars in operating induction motors," IEEE Transactions on Energy Conversions, vol. 3, pp. 873-879, December 1988.
29. N.M. Elkasabgy, A.R. Eastham, and G.E. Dawson, "Detection of broken bars in the cage rotor on an induction machine," IEEE Transactions on Industry Applications, vol. 28, no. 1, pp. 165-171, January/February 1992.
30. K.R. Cho, J.H. Lang, and S.D. Umans, "Detection of broken rotor bars in induction motors using state and parameter estimation," IEEE Transactions on Industry Applications, vol. 28, no. 3, pp. 702-709, May/June 1992.
31. J. Milimonfared, H.M. Kelk, S. Nandi, A.D. Minassians, and H.A. Toliyat, "A novel approach for broken-rotor-bar detection in cage induction motors," IEEE Transactions on Industry Applications, vol. 35, no. 5, pp. 1000-1006, September/ October 1999.
32. D.G. Dorrell, W.T. Thomson, and S. Roach, "Analysis of airgap flux, current, vibration signals as a function of the combination of static and dynamic air gap eccentricity in 3-phase induction motors," IEEE Transactions on Industry Applications, vol. 33, pp. 24-34, January 1997.
33. G. McPherson and R.D. Laramore, Electrical Machines and Transformers, 2nd ed., New York: John Wiley, 1990.
34. P. Neti and S. Nandi, "Analysis and modeling of a synchronous machine with structural asymmetries," IEEE-Canadian Conference on Electrical and Computer Engineering, Ottawa, Canada, May 2006.
35. P. Neti and S. Nandi, "Stator inter-turn fault detection of synchronous machines using field current signature analysis," IEEE Industry Applications Conference, Tampa, FL, October 2006.
36. N.A. Al-Nuaim and H.A. Toliyat, "A method for dynamic simulation and detection of dynamic air gap eccentricity in synchronous machines," IEEE International Electric Machines and Drives Conference, May 1997.
37. H.A. Toliyat and N.A. Al-Nuaim, "Simulation and detection of dynamic air-gap eccentricity in salient-pole synchronous machines," IEEE Transactions Industry Applications, vol. 35, no. 1, pp. 86-93, January-February 1999.
38. H.C. Kramer, "Broken damper bar detection studies using lux probe measurements and time-stepping inite element analysis for salient pole synchronous machines," IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, SDEMPED '03, pp. 193-197, August 2003.
39. G.B. Kliman, and R.A Koegl, "Noninvasive detection of broken rotor bars in operating induction motors," IEEE Transactions Energy Conversion, vol. 3, no. 4, pp. 873-879, December 1988.
40. S.B. Jovanovski, "Calculation and testing of damper-winding current distribution in a synchronous machine with salient poles," IEEE Transactions on Power Apparatus and Systems, vol. PAS-88, no. 11, pp. 1611-1619, November 1969.
41. M.M. Rahimian and K. Butler-Purry, "Modeling of synchronous machines with damper windings for condition monitoring," Electric Machines and Drives Conference, IEMDC 2009.
42. J.P. Bacher, "Detection of broken damper bars of a turbo generator by the field winding," International Conference on Renewable Energy and Power Quality, ICREPC 2004.
43. J.R.R. Ruiz, J.A. Rosero, A.G. Espinosa, and L. Romeral, "Detection of demagnetization faults in permanent-magnet synchronous motors under nonstation-ary conditions," IEEE Transactions on Magnetics, vol. 45, no. 7, pp. 2961-2969, July 2009.
44. A. Khoobroo and B. Fahimi, "A novel method for permanent magnet demagnetization fault detection and treatment in permanent magnet synchronous machines," Applied Power Electronics Conference and Exposition, pp. 2231-2237, 2010.
45. H.A. Toliyat and N.A. Al-Nuaim, "Simulation and detection of dynamic airgap eccentricity in salient-pole synchronous machines," IEEE Transactions on Industry Applications, vol. 35, no 1, pp.86-93, January/February 1999.
46. B.M. Ebrahimi, J. Faiz, and M.J. Roshtkhari, "Static-, dynamic-, and mixed-eccentricity fault diagnoses in permanent-magnet synchronous motors," IEEE Transactions on Industrial Electronics, vol. 56, no. 11, pp. 4727-4739.
47. W. le Roux, R.G. Harley, and T.G. Habetler, "Detecting rotor faults in low power permanent magnet synchronous machines," IEEE Transactions on Power Electronics, vol. 22, no. 1, pp. 322-328, January 2007.
48. A. Siddique, G.S. Yadava, and B. Singh, "A review of stator fault monitoring techniques of induction motors," IEEE Transactions On Energy Conversion, vol. 20, pp. 106-114, March 2005.
49. P. Neti and S. Nandi, "Stator inter-turn fault analysis of reluctance synchronous motor," Canadian Conference on Electrical and Computer Engineering, pp. 1283-1286, 2005.
50. P.P. Reichmeider, C.A. Gross, D. Querrey, D. Novosel, and S. Salon, "Internal faults in synchronous machines, Part I: The machine model," IEEE Transactions on Energy Conversion, vol. 15, no. 4, pp. 376-379, 2000.
51. B. M. Ebrahimi and J. Faiz, "Feature extraction for short circuit fault detection in permanent magnet synchronous motors using stator current monitoring," IEEE Transactions on Power Electronics, vol. 25, no. 10, pp. 2673-2682, 2010.
52. T. Xiaoping, L.A. Dessaint, M.E. Kahel, and A.O. Barry, "A new model of synchronous machine internal faults based on winding distribution," IEEE Transactions on Industrial Electronics, vol. 53, no. 6, pp. 1818-1828, 2006.
53. A. Ali Abdallah, J. Regnier, J. Faucher, and B. Dagues; "simulation of internal faults in permanent magnet synchronous machines," International Conference on Power Electronics and Drive Systems, vol. 2, pp. 1390-1395, 2005.
54. B. Vaseghi, B. Nahid-Mobarakeh, N. Takorabet, and F. Meibody-Tabar, "Modeling of non-salient pm synchronous machines under stator winding inter-turn fault condition: Dynamic model-FEM model," Vehicle Power and Propulsion Conference, pp. 635-640, 2007.
55. Rotating Machinery Insulation Test Guide, Doble Engineering Company, 1985.
56. Handbook to Assess the Insulation Condition of Large Rotating Machines, EPRI Power Plant Electrical Reference Series, vol. 16, pp. 5-24-5-31.
57. D. R. Albright, "Interturn short-circuit detection for turbine generator rotor winding," IEEE Transactions on Power and Apparatus Systems, vol. PAS-90, pp. 478-483, 1971.
58. R.J. Streifel, R.J. Marks, M.A. El-Sharkawi, and I. Kerszenbaum, "Detection of shorted turns in the feld winding of turbine generator rotors using novelty detector development and feld test," IEEE Transactions on Energy Conversion, vol. 11, no. 2, pp. 312-317, 1996.
59. M. Hongzhong, D. Yuanyuan, P. Ju, and Z. Limin, "The application of ANN in fault diagnosis for generator rotor winding turn-to-turn faults," IEEE Power and Energy Society General Meeting-Conversion of Electrical Energy in the 21st Century, 2008.
60. J. Rosero, J. Cusido, A. Garcia Espinosa, J.A. Ortega, L. Romeral, "Broken bearings fault detection for a permanent magnet synchronous motor under nonconstant working conditions by means of a joint time frequency analysis," IEEE International Symposium on Industrial Electronics, 2007.
61. M. Pacas, S. Villwock, and R. Dietrich, "Bearing damage detection in permanent magnet synchronous machines," IEEE Energy Conversion Congress and Exposition, pp. 1098-1103, 2009.