Industrial fire protection engineering

Industrial Fire Protection Engineering

Volumn , Issue , 2014, Pages 1-387

  Zalosh, Robert G ^a  

^a WORCESTER POLYTECHNIC INSTITUTE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85102332625     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781118903117     Document Type: Article

References (541)

1. Baker, W. E., Cox, P. A., Westine, P. S., Kulesz, J. J. and Strehlow, R. A., Explosion Hazards and Evaluation, Elsevier, 1983.
2. Boykin, R. F., Kazarians, M. and Freeman, R. A., Comparative fire risk study of PCB transformers, Risk Analysis, December 1986.
3. Bureau of Labor Statistics, Number of Nonfatal Occupational Injuries and Illnesses involving Days Away from Work by Event or Exposure, OS TB 4/20/2000 Table R.31,http://stats.bls.gov/oshhome.html, 2000.
4. Center for Chemical Process Safety, Guidelines for Evaluating the Characteristics of Vapor Cloud Explosions, Flash Fires, and BLEVEs, CCPS, AIChE, 1994.
5. Cote, A. and Linville, J., eds, Fire Protection Handbook, Sixteenth Edition, National Fire Protection Association, Quincy, MA, 1986.
6. Drysdale, D., An Introduction to Fire Dynamics, 2nd Edition, John Wiley & Sons, 1998.
7. Eckhoff, R., Dust Explosions in the Process Industries, Butterworth Heinemann, 2nd Edition, 1996.
8. Fire Safety Aspects of Polymeric Materials, Volume 4: Fire Dynamics and Scenarios, National Academy of Sciences Publication NMAB 318-4, Technomic Publishing Co., Westport, CT, 1978.
9. FPA Large Fire Analysis for 1986, Fire Prevention, 212, September 1988.
10. FMRC Clean Room Materials Flammability Test Protocol, Factory Mutual Research Corporation Test Standard Class Number 4910, September 1997.
11. Gann, R. et al., Risk Assessment: Final Report, National Fire Protection Research Foundation, 1991.
12. Guidelines for Hazard Evaluation Procedures, 2nd Edition, Center for Chemical Process Safety, AIChE, 1992.
13. Guidelines for Chemical Process Quantitative Risk Analysis, American Institute of Chemical Engineers Center for Chemical Process Safety, 1989.
14. Henley, E. and Kumamoto, H., Reliability Engineering and Risk Assessment, Prentice Hall, 1981.
15. Hoyle, W., McCleary, S. and Rosenthal, I., The Chemical Safety and Hazard Investigation Board’s Process for Selecting Incident Investigations, pp. 69–100, International Conference and Workshop on Process Industry Incidents, Center for Chemical Process Safety, Orlando, Florida, October 2000.
16. JH Marsh & McLennan, Large Property Damage Losses in the Hydrocarbon-Chemical Industries A Thirty-year Review, J&H Marsh & McLennan Consulting Services, 18th Edition, 1998.
17. Karter, M.J., Fire Loss in the United States During 1990, NFPA Journal, 85(5), September/October 1991.
18. Kort, J., On the Job: London, Firehouse, pp 48–52, January 1985.
19. Lotti, P.J., Electric Immersion Heater Redundant Control System, Semiconductor Safety Association paper, May 1986.
20. Major Fires: 1991-Worldwide, Loss Prevention, 14(4), Loss Prevention Association of India, October–December 1992.
21. NFPA Fire Analysis Division, Automatic Sprinkler Systems Do Have an Impact in Industry, Fire Journal, January 1987.
22. Natural Catastrophes and Man-made Disasters 1998: Storms, Hail and Ice Cause Billion-Dollar Losses, Sigma, 1/1999, Swiss Re, 1999.
23. Plastic and Plastic-Lined Tanks with Electric Immersion Heaters, Factory Mutual Loss Prevention Data Sheet 7-6, June 1986.
24. Redding, D. and Pauley, Jr., P., Large-Loss Fires in the United States During 1985, Fire Journal, November 1986.
25. SFPE Engineering Guide to Performance-Based Fire Protection Analysis and Design of Buildings, Society of Fire Protection Engineers, National Fire Protection Association, 2000.
26. SFPE Handbook of Fire Protection Engineering, Society of Fire Protection Engineers, National Fire Protection Association, 1995.
27. Semiconductor Fabrication Facilities, Factory Mutual Loss Prevention Data Sheet 7-7, January 1997.
28. Structures to Resist the Effects of Accidental Explosions, Department of the Army Technical Manual TM5-1300, 1991.
29. Taylor, K.T., The Large-Loss Fires of 1986, Fire Journal, November/December 1987.
30. Taylor, K.T. and Norton, A. L., Large-Loss Fires in the United States During 1987, Fire Journal, November/ December 1988.
31. Ward, R., FPA Large Fire Analysis for 1985, Fire Prevention, 207, March 1988.
32. Automatic Sprinkler Performance Tables. 1970 Edition, Fire Journal, NFPA, July 1970.
33. Briggs, G., Plume Rise, U.S. Atomic Energy Commission, 1969. (Available as TID-25075 from National Technical Information Service.)
34. Brighton, P.W.M., Evaporation from a Plane Liquid Surface into a Turbulent Boundary Layer, J. Fluid Mechanics, 159, 323–345, 1985.
35. Chandler, S.E., A Review of Some of the Literature Relating to the Performance and Reliability of Sprinklers, Building Research Establishment Note N136/86, 1987.
36. Christoe, M., Amendola, A. and Smeder, M., The Control of Major Accident Hazards: The Land-Use Planning Issue, Journal of Hazardous Materials, 65, 151–178, 1999.
37. City Water Main Repairs Cause Severe Loss, NFPA Fire Journal, 12–16, November 1965.
38. Crowl, D.A. and Louvar, J.F., Chemical Process Safety Fundamentals with Applications, PTR Prentice Hall, Englewood Cliffs, NJ, 1990.
39. Custer, R., Swimming Pool Chemical Plant Fire Springfield, Massachusetts (June 17, 1988), U.S. Fire Administration Technical Report Series, 1988.
40. Diefenbach, R.E., Pesticide Fires, in Hazardous Materials Spills Handbook, Bennett, G., Feates, F. and Wilder, I., eds., McGraw Hill, 1982.
41. Duclos, P., Binder, S. and Riester, R., Community Evacuation Following the Spencer Metal Processing Plant Fire, Nanticoke, Pennsylvania, J. of Hazardous Materials, 22, 1–11, 1989.
42. Factory Mutual Loss Prevention Data Sheet 1-20, ‘Protection Against Fire Exposures,’ Factory MA, 1979.
43. Factory Mutual Loss Prevention Data Sheet 2-8, ‘Earthquake Protection for Sprinkler Systems,’ Factory Mutual Research Corporation, October 1982.
44. Factory Mutual Loss Prevention Data Sheet 3-26, ‘Fire Protection Water Demand for Sprinklered Properties,’ Factory Mutual Research Corporation, 1983.
45. ‘Fire Suppression Rating Schedule,’ Insurance Services Office, New York City, 1980.
46. nd Edition, SFPE, NFPA, 1995.
47. Galloway, F.M. and Hirschler, M.M., A Model for the Spontaneous Removal of Airborne Hydrogen Chloride by Common Surfaces, Fire Safety Journal, 14, 251–268, 1989.
48. Goulter, I.C. and Kazemi, A., Analysis of Water Distribution Pipe Failure Types in Winnipeg, Canada, Journal of Transportation Engineering, 115(2), March 1989.
49. Guidelines for Use of Vapor Cloud Dispersion Models, Second Edition, Center for Chemical Process Safety of the American Institute of Chemical Engineers, 1996.
50. Guidelines for Chemical Process Quantitative Risk Analysis, Center for Chemical Process Safety of the American Institute of Chemical Engineers, 1989.
51. Hasegawa, H.K. and Lambert, H.E., Reliability Study on the Lawrence Livermore National Laboratory Water Supply System, Proceedings of the First Intl. Symposium on Fire Safety Science, 1986.
52. Heseldon, A.J.M. and Hinkley, P.L, Measurement of the Transmission of Radiation through Water Sprays, Fire Technology, 1, 130, 1965.
53. Kawamura, P. and Mackay, D., The Evaporation of Volatile Liquids, Proceedings of the 2nd Annual Seminar on Chemical Spills, Environment Canada, 1985.
54. Lees, F.P., Loss Prevention in the Process Industries, Butterworth, 1980.
55. Loss Prevention Council, ‘Rules of the Fire Offices’ Committee for Automatic Sprinkler Installations,’ 29th Edition, London, 1973.
56. Marryat, H.W., ‘Fire: A Century of Automatic Sprinkler Protection in Australia and New Zealand 1886–1986,’ Australian Fire Protection Association, Melbourne, 1988.
57. Mecklenburgh, J.C., ‘Hazard Assessment of Layout,’ Inst. of Chemical Engineers Symposium Series No. 71, 1982.
58. McGuire, J.H., Fire and the Spatial Separation of Buildings, Fire Technology, 1, 278–287, 1965.
59. Mills, M.T., Modeling the Release and Dispersion of Toxic Combustion Products from Chemical Plant Fires, Proceedings Intl. Conf. on Vapor Cloud Modeling, AIChE, 1987.
60. Nelson, H.E. and MacLennan, H.A., Chapter 3-14, “Emergency Movement,” The SFPE Handbook of Fire Protection Engineering, National Fire Protection Association, 1995.
61. NFPA 13, ‘Standard for the Installation of Sprinkler Systems,’ National Fire Protection Association, 1996.
62. NFPA 30B, ‘Code for the Manufacture and Storage of Aerosol Products,’ National Fire Protection Association, 1990.
63. NFPA 49, ‘Hazardous Chemicals Data,’ National Fire Protection Association, 1988.
64. NFPA 70, National Electrical Code, Chapter 5, Special Occupancies, National Fire Protection Association, 1989.
65. NFPA 80A, ‘Recommended Practice for Protection of Buildings from Exposure Fires,’ National Fire Protection Association, Quincy, MA, 1980.
66. NFPA 101, ‘Life Safety Code,’ National Fire Protection Association, 1990.
67. NFPA 325M, ‘Fire Hazard Properties of Flammable Liquids, Gases, and Volatile Solids,’ National Fire Protection Association, 1988.
68. NFPA 497A, ‘Recommended Practice for Classification of Class I Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas,’ National Fire Protection Association, 1986.
69. NFPA 497B, ‘Recommended Practice for Classification of Class II Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas,’ National Fire Protection Association, 1991.
70. Pauls, J., ‘Movement of People,’ Chapter 3-13, The SFPE handbook of Fire Protection Engineering, National Fire Protection Association, 1995.
71. Purser, D.A., ‘Toxicity Assessment of Combustion Products,’ The SFPE Handbook of Fire Protection Engineering, Section 2/Chapter 8, p 2–141, National Fire Protection Association, 1995.
72. O’Day, K., Organizing and Analyzing Leak and Break Data for Making Main Replacement Decisions, Journal American Water Works Association, November 1982.
73. Ramsay, C.G., Sylvester-Evans, R. and English, M.A., ‘Siting and Layout of Major Hazardous Installations,’ Inst. of Chemical Engineers Symposium Series No. 71, 1982.
74. Redding, D. and Pauley, P., Jr., Large-Loss Fires in the United States During 1985, Fire Journal, November 1986.
75. Sardquvist, S., Fire Brigade Use of Water, Interflam, Proceedings of the Eighth International Conference, pp. 675–683, Interscience Communications, 1999.
76. Sardqvist, S., Correlation Between Fire Fighting Operation and Fire Area: Analysis of Statistics, Fire Technology, 2000.
77. Shorter, G.W., McGuire, J.H., Hutcheon, N.B. and Legget, R.F., The St. Lawrence Burns, NFPA Quarterly, 53, 300–316, April 1960.
78. Wackter, D. and Foster, A., ‘Industrial Source Complex (ISC) Dispersion Model User’s Guide – Second Edition– Vol 1,’ EPA Report EPA-450/4-86-005a, 1986.
79. Walski, T.M. and Pelliccia, A., Economic Analysis of Water Main Breaks, Journal American Water Works Association, March 1982.
80. Walton, W.D. and McGrattan, K.B., ALOFT-FT(trademark) A Large Outdoor Fire plume Trajectory model – Flat Terrain Version 3.04. National Institute of Standards and Technology, NIST SP 924, 1998.
81. Walton, W.D., McGrattan, K.B. and Mullin, J.V., ‘ALOFT-PC A Smoke-Plume Trajectory Model For Personal Computers,’ National Institute of Standards and Technology, Arctic and Marine Oilspill Program Technical Seminar Proceedings, pp. 987–997, 1996.
82. Yamada, T., Smoke Plume Trajectory From In-Situ Burning of Crude Oil in Tomakomai: Field Experiments and Prediction With ALOFT-PC., National Research Institute of Fire and Disaster, Tokyo, Japan. National Institute of Standards and Technology, Gaithersburg, MD NISTIR 6242; October 1998. National Institute of Standards and Technology. Annual Conference on Fire Research: Book of Abstracts. November 2–5, 1998, Gaithersburg, MD, Beall, K.A., Editor, 95–96 pp, 1998. Available from National Technical Information Service, PB99-102519.
83. Ahmed, G.N. and Hurst, J.P., Modeling the Thermal Behavior of Concrete Slabs Subjected to the ASTM E119 Standard Fire Condition, J. of Fire Protection Engineering, 7, 125–132, 1995.
84. Alpert, R.L., Convective Heat Transfer in the Impingement Region of a Buoyant Plume, FMRC JI 0J0N1.BU, May 1985 (also in Journal of Heat Transfer, 109, February 1987).
85. Alpert, R.L. and Ward, E.J., Evaluating Unsprinklered Fire Hazards, FMRC RC84-BT-9, Fire Safety Journal, 7, 1984.
86. ASTM E-108, Standard Methods of Fire Tests of Roof Coverings, American Society for Testing and Materials, 1983.
87. ASTM E-119, Standard Methods of Fire Tests of Building Construction and Materials, American Society for Testing and Materials, Philadelphia, 1983.
88. ASTM P-191, Proposed Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies, American Society of Testing and Materials, 1986.
89. Barnett, J.R., Use and Limitations of Computer Models in Structural Fire Protection Engineering Applications, Fire Safety Journal, 9, 137–146, 1989.
90. Best, R., Fire Walls that Failed: The K Mart Corporation Distribution Center Fire, Fire Journal, 77(3), 74, May 1983.
91. BS 476 Part 8, Test Methods and Criteria for the Fire Resistance of Elements of Building Construction, British Standards Institution, 1972.
92. Campbell, J.A., Confinement of Fire in Buildings, Fire Protection Handbook, Section 7/Chapter 9, National Fire Protection Association, 1986.
93. Cooke, G.M.E., Fire Engineering of Tall Fire Separating Walls, Fire Research Station Paper 46/85, IFSEC Conference on Flexible Approaches to Fire Resistance and Passive Protection, April 1985.
94. Coursey, R., Do Roof Fire Tests Assure Performance? Plant Engineering, 54–57, April 14 1988.
95. Design Guide Structural Fire Safety Workshop, CIB W14, Fire Safety Journal, 10, 1986.
96. Drysdale, D., An Introduction to Fire Dynamics, John Wiley & Sons, 1985.
97. Fitzgerald, R., Structural Integrity During Fire, Section 7, Chapter 8, Fire Protection Handbook, National Fire Protection Association, 1986.
98. Factory Mutual Loss Prevention Data Sheet 1-1, ‘Building Construction and Materials,’ 1983.
99. Factory Mutual Loss Prevention Data Sheet 1-21, ‘Fire Resistance of Building Assemblies,’ Factory Mutual Engineering Corp., 1977.
100. Factory Mutual Loss Prevention Data Sheet 1-22, ‘Criteria for Maximum Foreseeable Loss Fire Walls and Space Separation,’ Factory Mutual Research Corporation, September 1985.
101. Factory Mutual Loss Prevention Data Sheet 1-23, ‘Protection of Openings in MFL Fire Walls,’ Factory Mutual Research Corporation, 1976 (also Technical Advisory Bulletin on Fire Doors, September 1987).
102. Factory Mutual Loss Prevention Data Sheet 1-28, ‘Insulated Steel Deck’, Factory Mutual Research Corporation, May 1983.
103. Factory Mutual Research Corporation Approval Standard for Fire Door and Frame Assemblies, Class Number 4100, Factory Mutual Research Corporation, October 1988.
104. ‘Fire Doors: Closing the Safety Gap,’ Record, Factory Mutual Training Resource Center, Sept/Oct 1986 and March/April 1988.
105. ‘Fire Resistance Tests – Elements of Building Construction,’ International Standards Organization Ref. No. ISO 834-1975/A1-1979/A2-1980 (E).
106. Fleischmann, C., ‘Analytical Methods for Determining Fire Resistance of Concrete Members,’ Section 4/Chapter 10, SFPE Handbook of Fire Protection Engineering, NFPA, 1995.
107. Gandhi, P.D., Correlations of Steel Column Fire Test Data, Fire Technology, 20–32, February 1988.
108. ‘Insulated Metal Roof Deck Fire Tests,’ Factory Mutual Engineering Division, 1955.
109. Isner, M.S., $49 Million Loss in Sherwin-Williams Warehouse Fire, Fire Journal, March/April 1988.
110. Latham, D.J., Kirby, B.R. and Thomson, G., The Temperatures Attained by Unprotected Structural Steelwork in Experimental Natural Fires, Fire Safety Journal, 12, 139–152, 1987.
111. Lev, Y. and Strachan, D.C., A Study of Cooling Water Requirements for the Protection of Metal Surfaces Against Thermal Radiation, Fire Technology, 213–229, August 1989.
112. Lie, T.T., Fire and Buildings, Applied Science, London, 1972.
113. Lie, T.T., Fire Temperature-Time Relations, The SFPE Handbook of Fire Protection Engineering, Section 4/Chapter 8, the National Fire Protection Association, 1988.
114. Milke, J., Analytical Methods for Determining Fire Resistance of Steel Members, Section 4/Chapter 9, SFPE Handbook of Fire Protection Engineering, NFPA, 1995.
115. NFPA 80, ‘Fire Doors and Windows,’ National Fire Protection Association, 1999.
116. NFPA 221, ‘Fire Walls and Fire Barrier Walls,’ National Fire Protection Association, 1994.
117. Odeen, K., Fire Resistance of Wood Structures, Fire Technology, 21(1), 35, February 1985.
118. Pettersson, S.E., Magnusson, S.E. and Thor, J., Fire Engineering Design of Steel Structures, Swedish Institute of Steel Construction, 1976.
119. ‘Standard Calculation Methods for Structural Design for Fire Conditions,’ American Society of Civil Engineers and Society of Fire Protection Engineers, 1995.
120. Taloma, D., Kruppa, J., Franssen, J. and Recho, N., Factors Influencing the Behavior of Steel Columns Exposed to Fire, J. of Fire Protection Engineering, 8, 31–43, 1996.
121. ‘The Effect of Exposure Duration on Insulated Metal Roof Deck Fires,’ Factory Mutual Engineering Division, Serial No. 12652-S5/RES, 1960.
122. Warren, J.H. and Coronna, A.A., This Method Tests Fire Protective Coatings, Hydrocarbon Processing, 1978.
123. White, R.H., Analytical Methods for Determining the Fire Resistance of Timber Members, Chapter 4-11, SFPE Handbook of Fire Protection Engineering, National Fire Protection Association, 1988.
124. You, H.Z. and Faeth, G.M., Ceiling Heat Transfer During Fire Plume and Fire Impingement, Fire and Materials, 3, 140–147, 1979.
125. Bouchard, J.K., Venting Practices, NFPA Handbook, Section 5, Chapter 10, 1982.
126. Bukowski, R.W. and Peacock, R.D., ‘Example Cases for the HAZARD I Fire Hazard Assessment Method,’ NIST Handbook 146, Vol 3, June 1989.
127. Cheng, W. H., ‘Modelling of Carbon Dioxide Total Flooding Discharge Tests,’ MS Thesis, Worcester Polytechnic Institute, 1991.
128. Cooper, L.Y., ‘The Need and Availability of Test Methods for Measuring the/smoke Leakage Characteristics of Door Assemblies,’ ASTM STP 882, pp 310–329, 1985.
129. Cooper, L.Y., Estimating the Environment and the Response of Sprinkler Links in Compartment Fires with Draft Curtains and Fusible-Link-Actuated Ceiling Vents – Theory, Fire Safety Journal, 16, 137–163, 1990. (Also as NBSIR 3734, April 1988.)
130. Cooper, L.Y., ‘Interaction of an Isolated Sprinkler Spray and a Two-Layer Compartment Fire Environment’, National Institute of Standards and Technology, NISTIR 4587, 1991.
131. Davis, W.D. and Cooper, L.Y., ‘Estimating the Environment and the Response of Sprinkler Links in Compartment Fires with Draft Curtains and Fusible-Link-Actuated Ceiling Vents – Part II: User Guide for the Computer Code LAVENT,’ NISTIR 89-4122, August 1989.
132. Drysdale, D., An Introduction to Fire Dynamics, John Wiley & Sons, 1985.
133. Epstein, M., Maximum Air Flow Rate Into a Roof-Vented Enclosure, J. Heat Transfer, 114, 535–538, 1992.
134. Factory Mutual Data Sheet 1-10, ‘Smoke and Heat Venting in Sprinklered Buildings,’ December 1978.
135. Fisher, F.L., Williamson, R.B., Toms, G.L. and Crinnion, D., Fire Protection of Flammable Work Stations in the Clean Room Environment of a Microelectronic Fabrication Facility, Fire Technology, 22(2), 148, May 1986.
136. Fung, F., ‘Evaluation of a Pressurised Stairwell Smoke Control System for a Twelve Storey Apartment Building’, National Bureau of Standards, NBSIR 73-277, 1973.
137. Grant, C., Halon Design Calculations, Chapter 4–6, The SFPE Handbook of Fire Protection Engineering, SFPE, NFPA, 1995.
138. Heselden, A.J.M., ‘The Interaction of Sprinklers and Roof Venting in Industrial Buildings: The Current Knowledge,’ Building Research Establishment Report, 1984.
139. Heskestad, G., ‘Model Study of Automatic Smoke and Heat Vent Performance in Sprinklered Fires,’ FMRC JI # 21933, 1974.
140. Heskestad, G., ‘Review of IITRI Report on Fire Venting of Sprinklered Buildings,’ FMRC Memo submitted to NFPA Committee on Heat and Smoke Venting, 1983.
141. Heskestad, G. and Hill, J.P., ‘Experimental Fires in Multiroom/Corridor Enclosures,’ FMRC JI 0J2N8.RU, National Bureau of Standards, October 1985 (also ‘Propagation of Fire Smoke in a Corridor,’ Proceedings of the 1987 ASME-JSME Conference, vol 1, ASME, 1987).
142. Heskestad, G. and Spaulding, R.D., ‘Inflow of Air Required at Wall and Ceiling Apertures to Prevent Escape of Fire Smoke,’ Proceedings of the Third International Symp. on Fire Safety Science, pp 919–928, 1991.
143. Hinkley, P.L., The Effects of Vents on the Opening of the First Sprinklers, Fire Safety Journal, 11, 211–225, 1986.
144. Hinkley, P.L., The Effect of Smoke Venting on the Operation of Sprinklers Subsequent to the First, Fire Safety Journal, 14, 221–240, 1989.
145. Hinkley, P.L., Smoke and Heat Venting, The SFPE Handbook of Fire Protection Engineering, Chapter 3–9, SFPE, NFPA, 1995.
146. Hotta, H. and Horiuchi, S., Detection of Smoldering Fire in Electrical Equipment with High Internal Air Flow, Fire Safety Science – Proceedings of the First Intl Symp., Hemisphere Publishing, p 699, 1986.
147. ISO DP 5925, Fire Tests – Smoke Control Door and Shutter Assemblies, Part 0 – Commentary, ISO/TC 92/WG 3N204, International Organizations for Standards, 1977.
148. Klote, J.H., ‘Smoke Movement Through a Suspended Ceiling System,’ NBSIR 81-2444, February 1982.
149. Klote, J.H. and Fothergill, J.W., Design of Smoke Control Systems, NBS Handbook 141, National Bureau of Standards, 1983.
150. Klote, J.H. and Cooper, L.Y., ‘Model of a Simple Fan-Resistance Ventilation system and its Application to Fire Modeling,’ NISTIR 89-4141, September 1989.
151. Klote, J.H., ‘Fire Experiments of Zoned Smoke Control at the Plaza Hotel in Washington DC,’ NISTIR 90-4253, 1990.
152. Klote, J.H. and Milke, J.A., Design of Smoke Management Systems, American Society of Heating, Refrigeration, and Air-Conditioning Engineers and the Society of Fire Protection Engineers, 1992.
153. Klote, J.H., Smoke Control, The SFPE Handbook of Fire Protection Engineering, Chapter 4–12, SFPE, NFPA, 1995.
154. Milewski, L., Control Safety Considerations for HVAC Smoke Management Techniques, Fire Safety Science and Engineering, ASTM STP 882, pp 301–309, 1985.
155. Miller, E.E., Venting Sprinklered Buildings, The Sentinel, Third Quarter 1984.
156. NFPA 12, ‘Carbon Dioxide Extinguishing Systems,’ National Fire Protection Association, 1989.
157. NFPA 12A, ‘Halogenated Fire Extinguishing Agent Systems,’ National Fire Protection Association, 1989, also Factory Mutual Data Sheet 4-8N, 1989.
158. NFPA 92A, ‘Recommended Practice for smoke Control Systems,’ National Fire Protection Association, 1988.
159. NFPA 204M-1982, ‘Guide for Smoke and Heat Venting,’ National Fire Protection Association, 1982, updated in 1998 Edition of NFPA 204.
160. NFPA 2001, ‘Clean Agent Fire Extinguishing Systems,’ Proposed 1993 Edition, National Fire Protection Association, 1993.
161. Saum, D., Saum, A., Hupman, J. and White, M., Pressurization Air Leakage Testing for Halon 1301 Enclosures, Conference of Substitutes and Alternatives to CFCs and Halons, Washington, DC, January 1988.
162. Sugawa, O., Oka, Y. and Hotta, H., Fire Induced Flow in a Clean Room with Downward Vertical Laminar Flow, 9th UJNR Panel Meeting, May 1987.
163. Thomas, P. et al., ‘Investigation into the Flow of Hot Gases in Roof Venting,’ Fire Research Station Technical Paper No. 7, HMS0, London, 1963.
164. The Ghent Fire Tests, Colt International Ltd, 1990.
165. Thomas, P. and Hinkley, P.L., ‘Design of Roof-Venting Systems for Single Storey Buildings,’ Fire Research Station Technical Paper No. 10, HMSO, London, 1964.
166. Thomas, P.H., ‘The Movement of Smoke in Horizontal Passages Against an Air Flow,’ Fire Research Station Note No. 723, September 1968.
167. Ward, E., ‘Design Requirements and the Need for Standards,’ IFSSEC, London, 1982.
168. Waterman, T.E. et al., ‘Fire Venting of Sprinklered Buildings,’ IITRI Project J08385, July 1982.
169. Alpert, R., Numerical Modeling of the Interaction Between Automatic sprinkler Sprays and Fire Plumes, Fire Safety Journal, 9, 157–163, 1985.
170. ASTM E 162, ‘Test Method for Surface Flammability of Materials Using a Radiant Energy Source,’ American Society for Testing and Materials, 1983.
171. ASTM E 906, ‘Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products,’ American Society for Testing and Materials, 1987.
172. ASTM E 1321, ‘Standard Test Method for Determining the Material Ignition and Flame Spread Properties,’ American Society for Testing and Materials, 1990.
173. ASTM E 1354, ‘Standard Test Method for Heat and Visible Smoke Release for Materials and Products Using an Oxygen Consumption Calorimeter,’ American Society for Testing and Materials, 1994.
174. Babrauskas, V., Burning Rates, Section 3, Chapter 1, The SFPE Handbook of Fire Protection Engineering, SFPE, NFPA, 1995.
175. ‘Before the Fire: Fire Prevention Strategies for Storage Occupancies’, National Fire Protection Association Ad Hoc Task Force, 1988.
176. Bill, R.G., Numerical Simulations of Actual Delivered Density Measurements, Fire Safety Journal, 17, 227–240, 1993.
177. Buckley, J.L., ‘Stored Commodity Test Program: Part III – Commodity Classification,’ FMRC JI 0N0R4.RU/0N1J8.RU, Prepared for the Society of the Plastics Industry, April 1988.
178. CEN, ‘Automatic Sprinkler Systems, Design and Installation and Maintenance,’ prEN 12845 (Draft), European Committee for Standardization, April 2001.
179. Chan, T.-S., Measurements of Water Density and Drop Size Distributions of Selected ESFR Sprinklers, J. Fire Protection Engineering, 6, 79–87, 1994.
180. Chan, T.-S., Kung, H.C., Yu, H.-Z. and Brown, W., Experimental Study of Actual Delivered Density for Rack- Storage Fires, Proceedings Fourth Intl. Symp. on Fire Safety Science, pp. 913–924, 1994.
181. Chicarello, P.J., Troup, J.M.A. and Dean, R.K., ‘Large-Scale Fire Test Evaluation of Early Suppression Fast Response Sprinkler Applications,’ Prepared for the National Fire Protection Research Foundation, FMRC JI 0N1E7.RR, 1986.
182. Dean, R., ‘Stored Plastics Test Program,’ FMRC JI 20269, June 1975.
183. Dean, R.K., ‘Investigation of Conditions Potentially Affecting Rack Storage Fire Severities,’ Factory Mutual Research Corporation J.I. 0E0J1.RR, October 1980.
184. Dean, R., ‘Stored Commodity Test Program: Part II – Large-Scale Tests of Cartoned Polyurethane Foam,’ FMRC JI 0N0J7.RR, March 1987.
185. Delichatsios, M.A., A Scientific Analysis of Stored Plastic Fire Tests, Fire Science and Technology, 3, 73–103, 1983.
186. Delichatsios, M. and Chen, Y., Asymptotic, Approximate, and Numerical Solutions for the Heatup and Pyrolysis of Materials Including Reradiation Losses, Combustion and Flame, 92, 292–307, 1993.
187. Evans, D., Ceiling Jet Flows, SFPE Handbook of Fire Protection Engineering, Chapter 2–4, SFPE, NFPA, 1995.
188. Factory Mutual Loss Prevention Data Sheet 2-2, ‘Early Suppression Fast Response Sprinklers,’ May 1988.
189. Factory Mutual Engineering Corporation Loss Prevention Data Sheet 8-0S, ‘Commodity Classification,’ 1979.
190. Factory Mutual Data Sheet 8-9, ‘Storage of Plastics and Elastomers,’ 1981.
191. Factory Mutual Loss Prevention Data Sheet 8-33, ‘Carousel Storage and Retrieval Systems,’ 1998.
192. Factory Mutual Loss Prevention Data Sheet 8-34, ‘Protection for Automatic Storage and Retrieval Systems,’ 1998.
193. FMRC Update, ‘Advances in Commodity Classification, A Progress Report,’ Vol 4 No 1, Factory Mutual Research Corporation, 1990.
194. ‘Flammability Test Method/Requirements for Packaging Materials,’ Underwriters Laboratories Report UL – USNNC154/86NK26091, Prepared for Wright-Patterson Air Force Base, 1988.
195. Field, P. and Murrell, J., The Fire Hazard and Protection of Bin Storage, Fire Surveyor, 17(6), 5–15, December 1988.
196. Goodfellow, D.G. and Troup, J.M.A., ‘Large-Scale Fire Tests to Study Sprinkler Sensitivity,’ FMRC JI 0H4R7.RR, 1983.
197. Hamins, A. and McGrattan, K., ‘Reduced-Scale Experiments to Characterize the Suppression of Rack-Storage Commodity Fires,’ NISTIR 6439, November 1999.
198. Hietaniemi, J., Kallonen, R. and Mikkola, E., Burning Characteristics of Selected Substances: Influence of Suppression with Water, Fire and Materials, 23, 149–169, 1999.
199. Heskestad, G. and Delichatsios, M.A., The Initial Convective Flow in Fire, Proceedings Seventeenth Intl. Combustion Symposium, pp. 1113–1122, 1978.
200. Heskestad, G., ‘Fire Plumes,’ Chapter 2-2, SFPE Handbook of Fire Protection Engineering, SFPE, NFPA, 1995.
201. Heskestad, G. and Bill, R., Quantification of Thermal Responsiveness of Automatic Sprinklers Including Conduction Effects, Fire Safety Journal, 14, 113–125, 1988.
202. Ingason, H., ‘Rack Storage Fires,’ Safetynet Seminar at www.safetynet.de/Activities/35.htm, February 2001.
203. Isner, M., $100 million Fire Destroys Warehouses, NFPA Journal, 37–41, November/December 1991.
204. Khan, M. ‘Evaluation of Fire Behavior of Packaging Materials,’ FMRC RC87-TP-7, presented at Defense Fire Protection Association Symposium, 1987.
205. Kung, H.C., Spaulding, R.D. and You, H-Z, ‘Response of Sprinkler Links to Rack Storage Fires,’ Factory Mutual Research Corporation J.I. 0G2E7.RA (2), November 1984.
206. Lee, J.L., ‘Early Suppression Fast Response (ESFR) Program Phase 1: Determination of Required Delivered Density (RDD) in Rack Storage Fires of Plastic Commodity,’ FMRC JI 0J0J5.RA, 1984.
207. Lee, J.L., ‘The Effect of Different Storage Configurations on Required Delivered Density (RDD),’ Factory Mutual Research Corporation J.I. 0M0E2.RA, April 1986.
208. Lee, J.L., ‘Stored Commodity Fire Test Program Part 1: Fire Products Collector Tests,’ FMRC JI 0N0R4.RU/0N1J8.RU, Prepared for The Society of the Plastics Industry, July 1987.
209. McGrattan, K., Hamins, A. and Stroup, D., ‘Sprinkler, Smoke & Heat Vent, Draft Curtain Interaction – Large Scale Experiments and Model Development,’ NISTIR 6196, September 1998.
210. McGrattan, K., Hamins, A. and Forney, G., Modeling of Sprinkler, Vent, and Draft Curtain Interaction, Proceedings Sixth International Symposium, Intl Assn for Fire Safety Science, 2000.
211. NFPA 13, ‘Automatic Sprinkler Systems,’ National Fire Protection Association, 1999.
212. NFPA 230, ‘Fire Protection of Storage,’ National Fire Protection Association, 1999.
213. NFPA 231, ‘Standard for General Storage,’ National Fire Protection Association, 1987.
214. NFPA 231C, ‘Rack Storage,’ National Fire Protection Association, 1987.
215. Persson, H. Sprinkler Protection of Warehouse- A New Method for Classification of Commodities, INTERFLAM 93, pp. 489–497, 1993.
216. Quintiere, J.G. and Harkleroad, M.T., New Concepts for Measuring Flame Spread Properties, in Fire Safety, Science and Engineering, ASTM STP 882, T.Z. Harmathy, Ed., American Society for Testing and Materials, 1985.
217. Quintiere, J.G., Surface Flame Spread, Section 2/Chapter 14, SFPE Handbook of Fire Protection Engineering, SFPE, NFPA, 1995.
218. Sleights, J.E., A Sprinkler Response Computer Program for Warehouse Storage Fires, MS Thesis, Worcester Polytechnic Institute, December 1993.
219. Spaulding, R.D., ‘Evaluation of Polyethylene and Polyethylene Terepthalate Commodities Using the Fire Products Collector,’ FMRC JI 0P0J2.RA, May 1988.
220. Tewarson, A., ‘Experimental Evaluation of Flammability Parameters of Polymeric Materials,’ Flame Retardant Polymeric Materials, vol 3, Plenum Press, 1982.
221. Tewarson, A., Generation of Heat and Chemical Compounds in Fires, Section 3/Chapter 4, SFPE Handbook of Fire Protection Engineering, SFPE, NFPA, 1995.
222. Troup, J.M.A., ‘Large-Scale Fire Tests of Rack Stored Group A Plastics in Retail Operation Scenarios Protected by Extra Large Orifice (ELO) Sprinklers,’ FMRC Report J.I. 0X1R0.RR, prepared for Group A Plastics Committee, November 1994.
223. Troup, J.M.A., Extra Large Orifice (ELO) Sprinklers: An Overview of Full-Scale Fire Test Performance, J. of Fire Protection Engineering, 9, 27–39, 1998.
224. Troup, J.M.A. and Vincent, B., Fire Test Performance Evaluation of K-Factor 25 Control-Mode (Density/Area) Extended-Coverage Sprinklers for Storage Occupancies, NFPA World Safety Congress & Exposition, May 2001.
225. Ward, R.P., Survey of Large Fires in Sprinklered and Non-Sprinklered Warehouses and Storage Areas, Fire Prevention, March 1985.
226. Yao, C., Early Suppression Fast Response Sprinkler Systems, Chemical Engineering Progress, 38–43, September 1988.
227. You, H.-Z., ‘Transient Plume Influence in Measurement of Effective Convective Heats of Rack Storage Fires,’ FMRC JI 0N1J0.RA(2), 1989.
228. Yu, H.-Z., ‘RDD Test Protocol for ESFR Sprinkler Applications,’ FMRC J.I. 0N1J0.RA, Factory Mutual Research Corp, 1989.
229. Yu, H.-Z., ‘A Sprinkler Response Prediction Computer Program for Warehouse Applications,’ FMRC J.I. 0R2E1.RA, Factory Mutual Research Corp, 1992.
230. Yu, H.Z., Lee, J.L. and Kung, H.C., Suppression of Rack Storage Fires by Water, Proceedings of the Fourth International Symposium on Fire Safety Science, pp. 901–912, 1994.
231. Association of the Nonwoven Fabric Industry (INDA), Nonwoven Fabrics Handbook, Cary, North Carolina, 1999.
232. ASTM D 3523, ‘Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test),’ ASTM, 1980.
233. ASTM E 771, ‘Standard Test Method for Spontaneous Heating Tendency of Materials,’ ASTM, 1981.
234. Beever, P., Self-Heating and Spontaneous Combustion, SFPE Handbook of Fire Protection Engineering, 2nd Edition, Section 2, Chapter 12, SFPE, NFPA, 1995.
235. Back, E.L., Auto-Ignition in Hygroscopic, Organic Materials – Especially Forest Products – as Initiated by Moisture Absorption from the Ambient Atmosphere, Fire Safety Journal, 4, 185–196, 1981/82.
236. Bowes, P.C., Self-Heating: Evaluating and Controlling the Hazards, Elsevier, 1984.
237. Chicarello, P. and Troup, J., ‘Decaying Pressure Fire Tests in Roll Tissue Paper Storage,’ FMRC Report J.I. 0H3R2.RR prepared for the American Paper Institute, September 1982.
238. Cleremont-Ferrand, ‘Fire Extinguishment Tests on Tire Storage,’ November 1971 (English Translation by Centre National de Prevencion et de Protection, 1973).
239. Dean, R., ‘Protection Investigation of 25-ft High Rubber Tire Storage,’ FMRC Report J.I. 0Z2R6.RR for the Rubber Manufacturers Association, July 1996.
240. Drysdale, D., Fire Dynamics, 2nd Edition, John Wiley & Sons Ltd, 1998.
241. Factory Mutual Loss Prevention Data Sheet 8-21, ‘Roll Paper Storage,’ FM Global, 1991, Revised October 1995.
242. Factory Mutual Loss Prevention Data Sheet 8-3, ‘Tire Storage,’ FM Global, 2001.
243. Factory Mutual Loss Prevention Data Sheet 8-23, ‘Rolled Nonwoven Fabric Storage,’ FM Global, 1991, revised 1993.
244. Handa, T., Morita, M., Sugawa, O., Ishii, T. and Hayashi, K., Computer Simulation of the Spontaneous Combustion of Coal Storage, Fire Science and Technology, 3, 13–23, 1983.
245. International Association of Fire Chiefs, ‘Guidelines for the Prevention and Management of Scrap Tire Fires,’ 1995.
246. Johnsen, M., The Aerosol Handbook, 2nd Edition, Wayne Dorland Company, Mendham, NJ, 1982.
247. Jones, J.C., Recent Developments and Improvements in Test Methods for Propensity Towards Spontaneous Heating, Fire and Materials, 23, 239–243, 1999.
248. Jones, J.C., Towards an Alternative Criterion for Shipping Safety of Activated Carbons, Journal of Loss Prevention in the Process Industries, 11, 407–411, 1998.
249. Jones, J.C., Towards an Alternative Criterion for Shipping Safety of Activated Carbons. Part 2. Further Data Analysis and Extension to Other Substrates, Journal of Loss Prevention in the Process Industries, 12, 183–185, 1998.
250. Kotoyori, T., Critical Ignition Temperatures of Chemical Substances, Journal of Loss Prevention in the Process Industries, 2, 1989.
251. Kuchta, J.M., Rowe, V.R. and Burgess, D.S., ‘Spontaneous Combustion Susceptibility of U.S. Coals,’ Bureau of Mines RI 8474, 1980.
252. Miniszewski, K., PEPCON Explosion Incident, Journal of Fire Protection Engineering, 1992.
253. NFPA, ‘Bulk Retail Store Fire,’ NFPA Fire Investigation Report, 1996.
254. NFPA 13, ‘Standard for Sprinkler System Installation,’ National Fire Protection Association, 2000.
255. NFPA 30B, ‘Manufacture and Storage of Aerosol Products,’ National Fire Protection Association, 1998.
256. NFPA 230, ‘Standard for Fire Protection of Storage,’ National Fire Protection Association, 1999.
257. NFPA 231D, ‘Standard for Storage of Rubber Tires,’ National Fire Protection Association, 1998.
258. NFPA 231F, ‘Standard for Storage of Roll Paper,’ National Fire Protection Association, 1996.
259. NFPA 420, ‘Code for the Storage of Liquid and Solid Oxidizers,’ National Fire Protection Association, 2000.
260. NFPA 850, ‘Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations,’ National Fire Protection Association, 1996.
261. Nugent, D., Oxidizing Pool Chemicals, NFPA Journal, 92, July/August 1998.
262. Nugent, D., Summer Safety: Pool Chemical Regulations, NFPA Journal, 94, May/June 2000.
263. Rizzo, J., Aerosol Flammability Test, Fire Journal, 1986.
264. Tuomisaari, M., Baroudi, D. and Latva, R., ‘Extinguishing Smouldering Fires in Silos,’ Brandforsk Project 745-961, VTT Publication 339, Technical Research Centre of Finland, 1998.
265. VDI Richtline 2262, Untersuchungsmethoden zur Ermittlung von sicherheits-technischen Kenngrossen von Stauben, VDI-Verlag GmbH, Dusseldorf, 1988.
266. Van Wingerden, K. and Alfert, F., ‘Detection and Suppression of Smoldering Fires in Industrial Plants,’ Christian Michelsen Research Report CMR-94-F25068, 1994.
267. Wendlandt, W.W., Thermal Methods of Analysis, John Wiley & sons Ltd, 1974.
268. Zalosh, R., ‘Aerosol Product Flammability Classification Test Program,’ FMRC J.I. 0M1R4.RU, July 1986.
269. ‘A Review of the Flammability Hazard of Jet A Fuel Vapor in Civil Transport Aircraft Fuel Tanks,’ DOT/FAA/AR-98/26, June 1998.
270. Affens, W.A. and McClaren, G.W., Flammability Properties of Hydrocarbon Solutions in Air, J. Chem. Eng. Data, 17, 1972.
271. API 2003, ‘Protection Against Ignition Arising Out of Static, Lightning, and Stray Currents,’ American Petroleum Institute, 1991.
272. ASTM E 502 - 84, ‘Selection and Use of ASTM Standards for the Determination of flash Point of Chemicals by Closed Cup Test Methods,’ American Society of Testing and Materials, 1984.
273. ASTM E 659 - 78, ‘Autoignition Temperature of Liquid Chemicals,’ American Society of Testing and Materials, 1984.
274. Babrauskas, V., Pool Fires: Burning Rates and Heat Fluxes, Fire Protection Handbook, Section 21, Chapter 6, NFPA, 1986.
275. Benedetti, R.P., ed, Flammable and Combustible Liquids Code Handbook, Third Edition, National Fire Protection Association, 1987.
276. Beyler, C., Flammability Limits of Premixed and Diffusion Flames, SFPE Handbook of Fire Protection Engineering, Section 2, Chapter 9, NFPA, 1995.
277. Black & Veatch, Engineers-Architects, ‘Turbine Generator Fire Protection by Sprinkler System,’ Electric Power Research Institute Report EPRI NP-4144, 1985.
278. Bright, A.W., Electrostatic Hazards in Liquids and Powders, J. of Electrostatics, 4(2) January 1978.
279. Briggs, A.A. and Webb, J.S., Gasoline Fires and Foams, Fire Technology, 24, 48–58, 1988.
280. Britton, L., Avoiding Static Ignitions in Chemical Operations, AIChE Publication G-67, 1999.
281. Brown, L.E. and Romine, L.M., Liquefied Gas Fires: Which Foam? Hydrocarbon Processing, 58(9), September 1979.
282. Bryan, J.L., Automatic Sprinkler and Standpipe Systems, Second Edition, National Fire Protection Association, 1990.
283. Buch, R., Hamins, A., Konishi, K., Mattingly, D. and Kashiwagi, T., Radiative Emission Fraction of Pool Fires Burning Silicone Fluids, Combustion and Flame, 108, 118–126, 1997.
284. Burford, R.R., The Use of AFFF in Sprinkler Systems, Fire Technology, 12, 5–17, 1976.
285. Bustin, W.M. and Dukek, W.G., Electrostatic Hazards in the Petroleum Industry, Research Studies Press Ltd (John Wiley & Sons Ltd), 1983.
286. Carhart, H.W., Leonard, J.T., Budnick, E.K., Ouellette, R.J., Shanley, J.H. and Saams, J.R., ‘Manual Fire Suppression Methods on Typical Machinery Space Spray Fires’, Naval Research Laboratory Memorandum Report 6673, 1990.
287. Carhart, H.W., Sheinson, R.S., Tatem, P. and Lugar, J., Fire Suppression Research in the U.S. Navy, Proceedings First International Conference on Fire Suppression Research, Stockholm, Sweden, 1992.
288. Cline, D.D. and Koenig, L.N., The Transient Growth of an Unconfined Pool Fire, Fire Technology, 149–162, 1983.
289. Corrie, J.D., ‘The Fire Protection of Flammable Liquid Risks by Foams,’ Inst of Chem Engrs Symp Series, 1975.
290. Denninger, V.L., ‘A Method to Compare the Potential of a Flowing Liquid Hydrocarbon to Generate Static Electricity,’ M.S. Thesis, Air Force Institute of Technology, NTIS # AD-753-386, 1972.
291. Drysdale, D., An Introduction to Fire Dynamics, Second Edition, John Wiley & Sons Ltd, 1998.
292. Ewing, C.T., Faith, F.R., Romans, J.B., Hughes, J.T. and Carhart, H.W. Flame Extinguishment Properties of Dry Chemical Extinction Weights for Small Diffusion Pan Fires and Additional Evidence for Flame Extinguishment by Thermal Mechanisms, J. Fire Protection Engineering, 4(2), 1992.
293. Faeth, G.M., Mixing, Transport, and Combustion in Sprays, Progress in Energy and Combustion Science, 13, 293–345, 1987.
294. Factory Mutual Approval Standard No. 6930, ‘Less Hazardous Hydraulic Fluid,’ Factory Mutual Research Corporation, 1975.
295. Factory Mutual Loss Prevention Data Sheet 7-14, ‘Fire & Explosion Protection for Flammable Liquid, Flammable Gas, & Liquefied Flammable Gas Processing Equipment & Supporting Structures,’ FMRC 1982.
296. Factory Mutual Loss Prevention Data Sheet 7-27, ‘Spray Application of Flammable and Com bustible Materials,’ FMRC 1977.
297. Factory Mutual Loss Prevention Data Sheet 7-32, ‘Flammable Liquid Pumping and Piping Systems,’ Factory Mutual Research Corporation, 1973.
298. Factory Mutual Loss Prevention Data Sheet 7-35, ‘Flammable Liquids,’ Factory Mutual Research Corporation, 1977.
299. Factory Mutual Loss Prevention Data Sheet 7-98, ‘Hydraulic Fluids,’ Factory Mutual Research Corporation, February 1981.
300. Flemming, R. P., Automatic Sprinkler Calculations, SFPE Handbook of Fire Protection Engineering, Section 4, Chapter 3, NFPA, 1995.
301. Gibson, N. and Lloyd, F.C., Electrification of Toluene in Pipeline Flow, J. Physics D: Applied Physics, 3, 563–573, 1970.
302. Glassman, I. and Dryer, F. L., Flame Spreading Across Liquid Fuels, Fire Safety Journal, 3, 123–138, 1980/81.
303. Hill, J.P., ‘AFFF Protection of a Simulated Aircraft Carrier Elevator Trunk Against JP-5 Spill Fires,’ FMRC JI 0M2N0.RR, 1986.
304. Holmstedt, G. and Persson, H., Spray Fire Tests with Hydraulic Fluids, Proceedings of the First Intl Symp on Fire Safety Science, pp. 869–879, 1986.
305. Inculet, I., Hazards in Electrostatic Painting, Conference on Electrostatic Hazards in the Storage and Handling of Powders and Liquids, Oyez Scientific, 1979.
306. Hshieh, F.-Y., Note: Correlation of Closed-Cup Flash Points with Normal Boiling Points for Silicone and General Organic Compounds, Fire and Materials, 21, 277–282, 1997.
307. Hshieh, F.-Y. and Julien, C., Experimental Study on the Radiative Ignition of Silicones, Fire and Materials, 22, 179–185, 1998.
308. Jeulink, J., Mitigation of the evaporation of Liquids by Fire-fighting Foams, 4th International Symposium on Loss Prevention in the Process Industries, I. Chem. Eng. Symp. Series No. 80, 1983.
309. Kirby, D.C. and DeRoo, J.L., Water Spray Protection for a ChemicalProcessing Unit, 18th AIChE Loss Prevention Symposium, 1984.
310. Khan, M. and Tewarson, A., Characterization of Hydraulic Fluid Spray Combustion, Fire Technology, 27, 321–333, 1991.
311. Khan, M., Flame Extinction of Water Miscible Flammable Liquid/Water Solutions, Proceedings, Fire Suppression and Detection Research and Application Symposium, National Fire Protection Research Foundation, 1997.
312. Klinkenberg, A. and ven der Minne, J.L., Electrostatics in the Petroleum Industry, Elsevier, 1958.
313. Kokkala, M., Fixed Water Sprays Against Open Liquid Pool Fires, Proceedings First International Conference on Fire Suppression Research, Stockholm, May 1992.
314. Koszman, I. and Gavis, J., Development of Charge in Low Conductivity Liquids Flowing Past Surfaces, Chem. Eng. Sci., 17, 1013–1022, 1962.
315. Leonard, J.T., Static Electricity in Hydrocarbon Liquids and Fuels, J. Of Electrostatics, 10, May 1981.
316. Loftus, J. J., Maldonado-Rosado, A. and Allen, P.J., ‘An Evaluation of the MSHA Temperature-Pressure Spray Ignition Test for Hydraulic Fluids,’ NBSIR 81-2372, National Bureau of Standards, 1981.
317. Louvar, J., Maurer, B. and Boicourt, G., Tame Static Electricity, Chem. Eng. Progress, 90, November 1994.
318. Macksimov, B., Obukh, A., Tikhonov, A. and Kapralov, V., Assessment of Spark-Free Conditions for Filling Tanks with Liquid Hydrocarbons, J. of Electrostatics, 23, 137–142, 1989.
319. Mancini, R.A., The Use (and Misuse) of Bonding for Control of Static Ignition Hazards, 21st Annual AIChE Loss Prevention Symposium, August 1987.
320. Mawhinney, J., Engineering Criteria for Water Mist Fire Suppression Systems, Proceedings First International Conference on Fire Suppression Research, Stockholm, Sweden, 1992.
321. Merritt, R.C., ‘Foam-Water and Automatic Sprinkler Protection for Flammable Liquid Process Structures,’ Paper No 8b, 17th Annual AIChE Loss Prevention Symposium, 1983.
322. Modak, A.T., ‘Ignitability of High-Fire-Point Liquid Spills’, EPRI NP-1731, Electric Power Research Institute, March 1981.
323. Mudan, K.S., Thermal Radiation Hazards from Hydrocarbon Pool Fires, Progress in Energy and Combustion Science, 10, 59–80, 1984.
324. Mudan, K.S. and Croce, P.A., Fire Hazard Calculations for Large Open Hydrocarbon Fires, SFPE Handbook of Fire Protection Engineering, Section 3, Chapter 11, NFPA, 1995.
325. NFPA 11, ‘Low-Expansion Foam,’ National Fire Protection Association, 1998.
326. NFPA 12, ‘Carbon Dioxide Extinguishing Systems,’ National Fire Protection Association, 1993.
327. NFPA 17, ‘Dry Chemical Extinguishing Systems,’ National Fire Protection Association, 1998.
328. NFPA 30, ‘Flammable and Combustible Liquids Code,’ National Fire Protection Association, 1996.
329. NFPA 77, ‘Recommended Practice for Static Electricity,’ National Fire Protection Association, 1993.
330. NFPA 497, ‘Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas,’ National Fire Protection Association, 1997.
331. NFPA 2001, ‘Clean Agent Fire Extinguishing Systems,’ National Fire Protection Association, 1996.
332. Nash, P., The Fire Protection of Flammable Liquid Storages with Water Sprays, Chemical Process Hazards, Inst of Chem Engrs Symposium Series, No. 39, pp. 1–17, 1974.
333. Owens, J.E., Spark Ignition Hazards Caused by Charge Induction, 21st Annual Loss Prevention Symposium, AIChE, August 1987.
334. Pfenning, D. and Evans, D., ‘Suppression of Gas Well Blowout Fires Using Water Sprays; Large and Small Scale Tests,’ American Petroleum Institute Annual Meeting, September 1984.
335. Post, L., Glos, M., Luettgens, G. and Maurer, B. The Avoidance of Ignition Hazards Due to Electrostatic Changes Occurring During the Spraying of Liquids Under High Pressure, J. Electrostatics, 23, 99–109, 1989.
336. Putorti, A., ‘Application of the Critical Radiative Ignition Flux Methodology to High Viscosity Petroleum Fractions,’ Master’s Thesis, Worcester Polytechnic Institute, 1994.
337. Pratt, T., Electrostatic Ignitions of Fires and Explosions, AIChE publication G-58, 1997.
338. Raj, P., Models for Cryogenic Liquid Spill Behavior on Land and Water, J. Hazardous Materials, 1981.
339. Rasbash, D., The Extinction of Fires by Water Sprays, Fire Research Abstracts and Reviews, 4, 28–53, 1962.
340. Richards, R.C., ‘High Expansion Foam Extinguishment of Machinery Space Fires,’ U.S. Coast Guard Report No. CG-D-83-76, 1975.
341. Roberts, A.F., Extinction Phenomena in Liquids, 15th Intl. Symposium on Combustion, Combustion Institute, pp. 305–313, 1975.
342. Roberts, A.F. and Brookes, F.R., Hydraulic Fluids: An Approach to High Pressure Spray Flammability Testing Based on Measurement of Heat Output, Fire and Materials, 5, 87–92, 1981.
343. Rynasko, J.D., Wolverton, C.D. and McLain, W.H., ‘Localized Fire Extinguishing System (LFES): Low Pressure Carbon Dioxide Agent Tests (Horn and Projection Nozzles) with Large and Small Machinery Mockups,’ U.S. Coast Guard Technical Note 052, May 1986.
344. Scarborough, D.R., Spray Finishing and Powder Coating, NFPA Fire Protection Handbook, Section 10, Chapter 7, 1986.
345. Sheinson, R.S., Eaton, H.G., Black, B.H., Brown, R., Burchell, H., Salmon, G., St. Aubin, J. and Smith, W.D., Total Flooding Fire Suppressant Testing in a 56m3 (2000 ft3) Compartment, Proceedings of the Halon Alternatives Workshop, Albuquerque, NM, 1993.
346. Stubley, D. and Mulligan, D.J., The Effect of Aqueous Surfactant Films on the Ignitability of Aviation Kerosene, Fire Technology, 24, 110–115, 1988.
347. Tewarson, A., Generation of Heat and Chemical Compounds in Fires, SFPE Handbook of Fire Protection Engineering, Section 1, Chapter 13, NFPA, 1988.
348. Thorne, P.F., Flash Points of Mixtures of Flammable and Non-Flammable Liquids, Combustion and Flame, 134, 1977.
349. Turner, A.F., Water Mist in Marine Applications, Water Mist Fire Suppression Workshop, National Institute of Standards and Technology, March 1–2 1993.
350. Westinghouse Electric Corporation, ‘Fire Retardant Lubricant for Turbine Generators,’ Electric Power Research Corporation Report EPRI NP-2843, 1983.
351. Wesson and Associates, Inc., ‘Results of Tests Using Low Expansion Foams to Control and Extinguish Simulated Industrial Fires,’ 1983.
352. Wray, H.A., Flammability of Chlorinated Hydrocarbons and Hydrocarbon Admixtures, J. Coatings Technology, 56, 37–43, 1984.
353. Young, J.R. and Fitzgerald, P.M., ‘The Feasibility of Using “Light Water” Brand AFFF in a Closed Head Sprinkler System for Protection Against Flammable Liquid Spill Fires,’ FMRC Serial No. 22352, 1975.
354. Yule, A.J. and Moodie, K., A Method for Testing the Flammability of Sprays of Hydraulic Fluid, Fire Safety Journal, 18, 273–302, 1992.
355. Zalosh, R., Explosion Hazards in Tanks of High Flash Point Liquids, International Symposium on Fire Science and Technology, Korean Institute of Fire Science and Engineering, 1997.
356. ‘Analysis of Tank Fires in the Petroleum Industry’, API Safety & Fire Protection Department, American Petroleum Institute, 1988.
357. Anderson, C., Townsend, W., Zoot, J. and Cogwill, G., “Effects of a Fire Environment on a Rail Tank Car Filled with LPG”, US Department of Transportation Federal Railroad Administration Report No. FRA-OR&D 75-31, 1974.
358. American Petroleum Institute, ‘Welded Steel Tanks for Oil Storage’, API Standard 650, Eight Edition, November 1988.
359. American Petroleum Institute, ‘Installation of Underground Petroleum Product Storage Systems’, API Publication 1615, Second Edition, 1987.
360. American Petroleum Institute, ‘Venting Atmospheric and Low-Pressure Storage Tanks’, API Standard 2000, Second Edition, 1973.
361. American Petroleum Institute, ‘Guides for Fighting Fires in and around Petroleum Storage Tanks’, API Publication 2021, 1974.
362. Bainbridge, B.L. and Keltner, N.R., Heat Transfer to Large Objects in Large Pool Fires, J. Hazardous Materials, 20, 21–40, 1988.
363. Benedetti, R.B., Flammable and Combustible Liquids Code Handbook, Third Edition, National Fire Protection Association, 1987.
364. Capizzani, R.E., An Overview of Flammable Liquid Drum Storage and Protection, 18th AlChE Loss Prevention Symposium, 1984.
365. Crowl, D.A. and Louvar, J.F., Chemical Process Safety Fundamentals with Applications, PTR Prentice Hall, Englewood Cliffs, NJ, 1990.
366. Das, A.K., ‘Safe Separation Distances Between Hydrocarbon Storage Tanks Based on Radiation due to Fire in One Tank’, Worcester Polytechnic Institute M.S. Thesis, December 1983.
367. Davie, F.M., Mores, S., Nolan, P.F. and Hoban, T.W.S., Evidence of the Oxidation of Deposits in Heated Bitumen Storage Tanks, J. Loss Prevention in the Process Industries, 6, 145–150, 1994.
368. Dean, R.K., ‘Full-Scale Storage Fire Tests of Distilled Spirits in PET Plastic Bottles’, FMRC Report Prepared for the Distilled Spirits Council of the United States, Inc, 1985.
369. Dean, R.K., ‘Exploratory Testing of Flammable Liquids in Plastic Containers,’ FMRC J.I. ONOE4.RR, 1986.
370. Delichatsios, M.A., Exposure of Steel Drums to an External Spill Fire, 15th AlChE Loss Prevention Symposium, 1981.
371. Dimpfl, L.H., Asphalt Tank Explosions, in Fire Protection Manual for Hydrocarbon Processing Plants, C.H. Vervalin, ed., vol 1, Third Edition, Gulf Publishing, 1985.
372. Duggan, J.J., Gilmour, C.H. and Fisher, P.F., Requirements for Relief of Overpressure in Vessels Exposed to Fire, Transactions of the ASME, 66, 1944 (also in NFPA Quarterly, October 1943).
373. El-Iskandarani, Bilal M. K., ‘Emergency Relief Venting Analysis for Flammable Liquid Storage Tanks,’ Worcester Polytechnic Institute, Masters Thesis, 1994.
374. Epstein, M., Fauske, H.F. and Hauser, G.M., The Onset of Two-Phase Venting via Entrainment in Liquid-Filled Storage Vessels Exposed to Fire, J. Loss Prevention in the Process Industries, 2, 45–49, 1989.
375. ‘Fact-Finding Report on National Flammable Liquid Container Storage Research Project,’ Underwriters Laboratories Inc Report to the National Fire Protection Research Foundation, September 1990.
376. Fauske, H.K., Epstein, M., Grolmes, M.A. and Leung, J.C., ‘Emergency Relief Vent Sizing for Fire Emergencies Involving Liquid-Filled Atmospheric Storage Vessels’, Plant/Operations Progress, vol 5, No. 4, pp 205–208, 1986.
377. Fauske, H.K., ‘Emergency Relief System Design for Reactive and Non-Reactive Systems: Extension of the DIERS Methodology,’ AlChE Loss Prevention Symposium, Minneapolis, 1987.
378. ‘Final Report on Explosions in Very Large Tankers’, International Chamber of Shipping, London, 1976.
379. ‘Fire Spread in Storage Tank Farms’, Contact, Swiss Reinsurance Company, 1987.
380. FM Data Sheet 7-29, ‘Flammable Liquids in Drums and Smaller Containers,’ Factory Mutual Research Corporation, September 1989.
381. FM Data Sheet 7-88, ‘Storage Tanks for Flammable and Combustible Liquids’, Factory Mutual Research Corporation, July 1976.
382. Forrest, H.F., Emergency Relief Vent Sizing for Fire Exposure When Two Phase Flow Must Be Considered, AlChE 19th Loss Prevention Symposium, March 1985.
383. Fritz, R.H. and Jack, G.G., Water in Loss Prevention: Where Do We Go from Here, Hydrocarbon Processing, August 1983 (also in Fire Protection Manual for Hydrocarbon Processing Plants, C.H. Vervalin, ed., Third Edition, vol 1, 1985).
384. Garrison, W.G., ed., ‘100 Large Losses: A Thirty Year Review of Property Damage Losses in the Hydrocarbon- Chemical Industries,’ M & M Protection Consultants, 1988.
385. General Electric, ‘Bulging and Rupture Characteristics of 55-Gallon, Steel Closed-Top Drums at Known Pressure,’ Company Report No. R-65-Ch-SD-529, Silicone Products Department of General Electric, September 30 1965.
386. Gordon, G.A., ‘Relative Fire Resistance of Shipping Drums,’ Sonoco Fibre Drum Inc, Lombard, Illinois, March 1989.
387. Gregory, J.J., Mata, R. and Keltner, N.R., ‘Thermal Measurements in a Series of Large Pool Fires,’ Sandia Report SAND85-0196, August 1987.
388. Grolmes, M.A. and Epstein, M., Plant/Operations Progress, October 1985 (also ‘DIERS Appendix C: Externally Heated Vessels,’ available from AlChE, June 1983).
389. Hall, J.R., A Fire Risk Analysis Model for Flammable and Combustible Liquid Products in Storage and Retail Occupancies, Fire Technology, 31(4), November 1995.
390. Henry, M.F., ed, Flammable and Combustible Liquids Code Handbook, Second Edition (based on the 1984 edition of NFPA 30), National Fire Protection Association, 1984.
391. Herzog, G.A., Recent Major Floating Roof Tank Fires and Their Extinguishment, Fire Journal, July 1974.
392. Hickey, H.E., Foam System Calculations, The SFPE Handbook of Fire Protection Engineering, Section 4, Chapter 5, NFPA, 1995.
393. Hill, J.P., ‘International Foam-Water Sprinkler Research Program: Task 3A and Task 3B Tests,’ FMRC Report to National Fire Protection Research Foundation, 1991.
394. Holman, J.P., Heat Transfer, Seventh Edition, McGraw-Hill, 1990.
395. Isner, M.S., $49 Million Loss in Sherwin-Williams Warehouse Fire, Fire Journal, 65, 1988.
396. Kaura, M.L., ‘Aid to Firewater Design,’ Hydrocarbon Processing, 59, December 1980, 138–147.
397. Kitagawa, T., Presumption of Causes of Explosions in Very Large Tankers, Fourth Intl. Symposium on Transport of Hazardous Cargoes by Sea & Inland Waterways, 1975.
398. Lees, F.P., Loss Prevention in the Process Industries, Butterworth, 1980.
399. Leung, J.C. and Nazzario, F.N., Two-Phase Flow Evaluations Based on DIERS, API and ASME Methodologies, AlChE Loss Prevention Symposium, 1989.
400. Lougheed, G.D. and Crampton, G.P., ‘Fire Tests of Distilled Spirits Storage Tanks,’ National Research Council Canada Report No. CR-5727.1, also available from Association of Canadian Distillers, Ottawa, 1989.
401. Merritt, R.C., Foam-Water and Automatic Sprinkler Protection for Flammable Liquid Process Structures, 17th Annual AlChE Loss Prevention Symposium, RC83-TP-7, 1983.
402. Mudan, K. and Croce, P.A., Fire Hazard Calculations for Large Open Hydrocarbon Fires, The SFPE Handbook of Fire Protection Engineering, NFPA, 1995.
403. Nash, P., The Fire Protection of Flammable Liquid Storage with Water Sprays, Inst. Chem. Engs. Symp. Series No. 39, 1974.
404. National Academy of Sciences, ‘Pressure-Relieving Systems for Marine Bulk Liquid Containers,’ 1973.
405. Newman, R.M., Fitzgerald, P.M. and Young, J.R., ‘Fire Protection of Drum Storage Using “Light Water” Brand AFFF in a Closed Head Sprinkler System,’ FMRC JI 22464, March 1975.
406. NFPA 11, ‘Standard for Low Expansion Foam and Combined Agent Systems,’ National Fire Protection Association, 1983.
407. NFPA 30, ‘Flammable and Combustible Liquids Code,’ National Fire Protection Association, 1987, 1996.
408. NFPA 231, ‘Standard for General Storage,’ National Fire Protection Association, 1987.
409. Nugent, D., ‘Class 1B Flammable Liquid Sales and Storage Fire Tests,’ Schirmer Engineering Corporation Final Report, October 1991, (also available from SFPE).
410. Nugent, D., ‘Fire Tests Involving Class II Combustible Liquid in Plastic Containers Using a Fire Retardant Package Assembly and Class IB Flammable Liquid in Metal Containers,’ Schirmer Engineering Corporation Final Report, November 1991.
411. Perzak, F.J., Kubala, T.A. and Lazzara, C.P., ‘Fire Tests of Five-Gallon Containers Used for Storage in Underground Coal Mines,’ Bureau of Mines RI 8946, 1985.
412. Pignato, J.A., Storage Tank Protection Using Aqueous Film-Forming Foam, Fire Journal, November 1978.
413. Post, L., Glor, M., Luttgens, G. and Maurer, B., The Avoidance of Ignition Hazards due to Electrostatic Charges During the Spraying f Liquids Under High Pressure, J. Electrostatics, 23, 99–109, 1989.
414. Przybyla, L. and Ghandi, P., Flammable Liquids in Plastic Containers, Fire Journal, May/June 1990.
415. Redding, D. and O’Brien, A., Large Loss Fire in the United States During 1984, Fire Journal, 16, November 1985.
416. Richards, R.C. and Munkenback, G.J., ‘Fire Exposure Tests of Polyethylene and 55 Gallon Steel Drums Load with Flammable Liquids-Phase II, Final Report,’ CG-D-86-77, August 1977.
417. Robertson, R.B., Spacing in Chemical Plant Design Against Loss by Fire, Process Industry Hazards, 157, 1976.
418. Rubber Reserve Co., ‘Heat Input to Vessels,’ Rubber Reserve Co. Safety Memorandum No. 89, 1944.
419. Rubber Reserve Co., ‘Protection of Vessels Exposed to Fire,’ Rubber Reserve Co. Safety Memorandum No. 123, 1945.
420. Russell, L.H. and Canfield, J.A., Experimental Measurement of Heat Transfer to a Cylinder Immersed in a Large Aviation Fuel Fire, J. Heat Transfer, August 1973.
421. Scheffey, J.L., Status Report on Fire Testing of Liquids Stored in Intermediate Bulk Containers, Proceedings Fire Suppression and Detection Research and Applications Symposium, 1997.
422. Shipp, M.P., ‘Hydrocarbon Fire Standard–An Assessment of Existing Information,’ Fire Research Station, Building Research Establishment, OT/R/8294, 1983.
423. Solberg, D.M. and Borgnes, O., Thermal Response of Process Equipment to Hydrocarbon Fire, 16th AlChE Loss Prevention Symposium, 1982.
424. Southwest Research Institute, ‘Fire Tests of Steel and Plastic Containers of Paint Thinner,’ Prepared for American Iron and Steel Institute, April 16 1987.
425. Sumitra, P.S. and Troup, J. M. A., ‘Fire Protection Requirements for Six-Barrel High Palletized Storage of Distilled Spirits,’ Prepared for Distilled Spirits Council of the United States, Inc, FMRC JI OC2R6.RR February 1979.
426. Tavares, R., ‘Investigation of Solvent-Based Coatings in 55-Gallon Drum Test Apparatus,’ FMRC J.I. OG3R1.RA, Prepared for National Paint and Coatings Association, 1982.
427. Tavares, R. and Delichatsios, M.A., ‘Pressure Relief in Flammable Liquid Drums by Pressure-Activated and Plastic Bungs,’ FMRC JI OF0R4.RA, prepared for Steel Shipping Container Institute, 1981.
428. Townsend, W., Anderson, C., Zoot, J. and Cowgill, G., ‘Comparison of Thermally Coated and Uninsulated Rail Tank Cars Filled with LPG Subjected to a Fire Environment,’ Department of Transportation Federal Railroad Administration Report FRA-OR&D 75-32, 1974.
429. Underwriters Laboratories Inc., ‘Fact-Finding Report on National Flammable Container Storage Research Project,’ September 1990.
430. Underwriters Laboratories Inc. ‘International Foam-Water Sprinkler Research Projectm Task 4–Palletized Storage Fire Tests 1 Through 13,’ February 1992.
431. Wachtell, G.P. and Langhaar, J.W. ‘Fire Test and Thermal Behavior of 15-Ton Lead-Shielded Cask,’ E.I. DuPont de Nemours and Co., DP-1070, Engineering and Equipment TID-4500, 1966.
432. Wackerlig, H., The Aftermath of the Sandoz Fire, Fire Prevention, 199, 13–20, May 1987.—doubtvol in bold
433. Wagers, W.D., Capizzani, R.E., Hill, F.C., Lust, M., and Trondel, R.J., ‘Deluge Protection for Class I Flammable Liquids Stored Three High in 55Gallon Drums,’ Paper No 63C, August 18 1981 (presented A > I > Ch.E 1981 Summer National Meeting, Detroit, Michigan).
434. Wang, Z.-X., A Three Layer Model for Oil Tank Fires, Proceedings of the Second Intl. Symposium on Fire Safety Science, pp. 209–220, 1991.
435. Yao, C., ‘Flammable Liquid Drum Storage Fire Protection System Development: Phase I,’ Prepared for Manufacturing Chemists Association, FMRC J.I. 16425, 1967, 16425.1, 1968.
436. Yamaguchi, T. and Wakasa, K., Oil Pool Fire Experiment, Proceedings of the First Intl. Symposium on Fire Safety Science, pp. 911–918, 1985.
437. Alexander, J., Bogan, D., Eaton, H., Greene, J., Paholski, J., Sheinson, R., Smith, W., Tatem, P., Wang, H., Williams, F., Henderson, C., Polito, P., Stone, J. and Mc Lain, W., ‘Navy Electrical Cable Full-Scale Fire Tests of 1985 at Mobile, Alabama,’ Naval Research Laboratory Memorandum Report 6395, February 1989.
438. ANSI/UL 1581-1991, ‘Reference Standard for Electrical Wires, Cables, and Flexible Cords,’ Underwriters Laboratories, 1991.
439. ANSI/UL 1666-1997, ‘Standard Test for Flame Propagation Height of Electrical and Optical Fiber Cable Installed Vertically in Shafts,’ Underwriters Laboratories, 1997.
440. Babrauskas, V., Peacock, R., Braun, E., Bukowski, R. and Jones, W., ‘Fire Performance of Wire and Cable: Reaction-to-Fire Tests – A Critical Review of the Existing Methods and of New Concepts,’ NIST Technical Note 1291, 1991.
441. Badger, S., Large-Loss Incidents, NFPA Journal, November/December 1999.
442. Barnes, M., Briggs, P., Hirschler, M., Matheson, A. and O’Neil, T., A Comparative Study of the Performance of Halogenated and Non-Halogenated Materials for Cable Applications. Part 11 Tests on Cables, Fire and Materials, 20, 17–37, 1996.
443. British Standard 6266, ‘Fire Protection for Electronic Data Processing Installations,’ 1992.
444. Chapin, J., Tan, C., Willis, A., Pye, K., Hoover, J. and Caudil, L., Full-Scale Fire Tests of LAN Data Communication Cables Used in Concealed Space Applications, The Loss Prevention Council Fire Safety Seminar, 1999. (See also same title paper by J. Hoover et al. In Fire Risk and Hazard Assessment Research Application Symposium, National Fire Protection Research Foundation, June 1997.)
445. Chapin, J.T. and Gandhi, P., Comparison of LAN Cable Smoke Corrosivity by U.S. and IEC Test Methods, Proceedings National Fire Protection Research Foundation Fire Risk & Hazard Assessment Research Application Symposium, 1997.
446. Chavez, J. and Lambert, L., ‘Evaluation of Suppression Methods for Electrical Cable Fires,’ NUREG/CR-3656, SAND83-2664, 1986.
447. Cline, D., von Riesemann, W. and Chavez, J., ‘Investigation of Twenty-Foot Separation Distance as a Fire Protection Method as Specified in 10 CFR, Appendix R,’ Sandia Report SAND83-0306, NUREG/CR-3192, 1983.
448. Commission of the European Communities, ‘Classes of Reaction to Fire Performance for Power, Control, and Communication Cables,’ Commission Decision RG N208, Annex, September 2000.
449. Eisner, H., Fire Beneath the Streets, Firehouse, November 1983.
450. Factory Mutual Loss Prevention Data Sheet 5-31/14-5, ‘Cables and Bus Bars,’ Revised 1998.
451. Factory Mutual Research Specification Test Standard 3972, ‘Cable Fire Propagation,’ 1989.
452. Fustich, C., ‘Transformer Room Fire Tests,’ General Services Administration Technical Report under project No. PB 79-08, 1980.
453. Gandhi, P., Przybyla, L. and Grayson, S., Electric Cable Applications, Chapter 16 in Heat Release in Fires, Elseveir, 1992.
454. Gandhi, P., Using Calorimeter Data and a Zone Model to Predict Smoke Obscuration in Room Fires – A Parametric Study, Fire Safety Journal, 20, 115–133, 1993.
455. Gustafson, N.-E., Sprinkler Tests in a Cable Duct in Rautaruuki Oy’s Factory in Brahestad 23-24.9.1975, Industribrand Meddelanden, 18–24, 3/1976.
456. Hathaway, L., Electric Generating Plants, NFPA Fire Protection Handbook, Eighteenth Edition, p. 9–213, 1997.
457. Heard, D., ‘Study of Fire Extinguishment of Transformer Fluids,’ FMRC J.I. 0F0N1.RG, prepared for Department of Transportation, 1980.
458. Hill, J., ‘Fire Tests in Ventilated Rooms Extinguishment of Fires in Grouped Cable Trays,’ EPRI NP-2660, Project 1165-1, December 1982.
459. ‘Hinsdale Central Office Fire,’ Joint Report of the State Fire Marshall and Illinois Commerce Commission Staff, prepared by Forensics Technologies International Corporation, March 1989.
460. Hshieh, F.Y., Shielding Effects of Silicon-Ash Layer on the Combustion of Silicone and Their Possible Applications in the Fire Retardancy of Organic Polymers, Fire and Materials, 22, 69–76, 1998.
461. IEC 332, ‘Tests on Electric Cables under Fire Conditions,’ International Electrotechnical Commission. 1989.
462. IEC 1034, ‘Measurement of Smoke Density of Electric Cables Burning under Defined Conditions,’ International Electrotechnical Commission. 1991.
463. Industrial Risk Insurers, Cable Trays: Confining the Cables and Losses, The Sentinel, Second Quarter, 1988.
464. Kennedy, K., Fire-Fighting Experience with Indoor Transformers, Canadian Electrical Association, 1974.
465. Khan, M., ‘Electrical Failure of Wires Inside 1-Inch Conduit Under Simulated Fire Conditions,’ FMRC J.I. 0H4R4.RC, 1984.
466. Krock, R. and Smith, G., Performance Based Fire Classifications for Plastics Used in Electronic Enclosures, Proceedings of the 1997 Fire Risk and Hazard Assessment Research Application Symposium, National Fire Protection Research Foundation, 1997.
467. Lathrop, J., World Trade Center Fire, Fire Journal, July 1975.
468. Lin, W.-H., ‘Analysis of Fire Detection and Suppression Systems for Outdoor Oil-Filled Transformers,’ M.S. Thesis, WPI, 1991.
469. Mangs, J. and Keski-Rahkonen, O., ‘Full-Scale Fire Experiments on Electronic Cabinets,’ VTT Publication 186, 1994.
470. Mangs, J. and Keski-Rahkonen, O., ‘Full-Scale Fire Experiments on Electronic Cabinets, II,’ VTT Publication 269, 1996.
471. NFPA 15, ‘Standard for Water Spray Fixed Systems for Fire Protection,’ 1996 Edition.
472. NFPA 70, ‘National Electrical Code,’ 1999 Edition, National Fire Protection Association, 1999.
473. NFPA 75, ‘Standard for the Protection of Electronic Computer/Data Processing Equipment’ (1999 Edition).
474. NFPA 76, ‘Draft Standard for the Protection of Telecommunications Facilities,’ 1999.
475. NFPA 262, ‘Standard Method for Test for Fire and Smoke Characteristics of Wires and Cables,’ National Fire Protection Association, 1994.
476. NFPA 850, ‘Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations,’ National Fire Protection Association, 1996.
477. NEMA Fluid-Filled Transformer Flammability Study Committee, ‘A Report on the Fire Safety Test Methods and Performance Criteria for Transformers Containing PCB Replacement Fluids,’ National Electrical Manufacturers Association Report for National Bureau of Standards and Department of Energy, 1980.
478. New York Board of Fire Underwriters Report, ‘One World Trade Center Fire,’ 1975.
479. Newman, J. ‘Fire Tests in Ventilated Rooms, Detection of Cable Tray and Exposure Fires,’ EPRI NP2751, February 1983.
480. NIOSH Publication No. 86-111, ‘Polychlorinated Biphenyls (PCBs): Potential Health Hazards from Electrical Equipment Fire or Failures,’ National Institute of Occupational Safety and Health, February 1986 (available on Web at www.cdc.gov/niosh/8611145.html).
481. Nowlen, S., ‘A Summary of Nuclear Power Plant Fire Safety Research at Sandia National Laboratories, 1975–1987,’ NUREG/CR-5384, SAND89-1359, 1989.
482. Reagor, B., Smoke Corrosivity: General, Impact, Detection, and Protection, J. Fire Sciences, 10, 169–179, 1992.
483. Riches, W., ‘Full Scale Horizontal Cable Tray Fire Tests,’ Fermi National Accelerator Laboratory Report September 1988.
484. Robinson, P., Copper versus Fiber, Cabling Systems, February 2000.
485. Schultz, N., Fire Protection for Cable Trays in Petrochemical Facilities, 1985 AIChE Loss Prevention Symposium, Paper 59E, 1985.
486. Skjordahl, J. and Metes, W., ‘Fact-Finding Report on Comparative Flame Propagation and Smoke Development Tests on Communication Cables in Various Test Geometries,’ Underwriters Laboratories Project 76NK8188, 1978.
487. nd Intl. Symposium on Fire Safety Science, pp. 781–790, Hemisphere Publishing, 1989.
488. Sumitra, P., ‘Categorization of Cable Flammability Intermediate-Scale Fire Tests of Cable Tray Installations,’ EPRI NP-1881, Project 1165-1, August 1982.
489. Tanaka, T., Nowlen, S., Korsah, K., Wood, R. and Antonescu, C., Technical Findings on the Impact of Smoke Exposure for Digital I & C, Proceedings International Topical Meeting on Nuclear Plant Instrumentation, Controls, and Human-Machine Interface Technologies, November, 2000.
490. Tewarson, A. and Khan, M., ‘Electrical Cables – Evaluation of Fire Propagation Behavior and Development of Small-Scale Test Protocol,’ FMRC J.I. 0M2E1.RC, January 1989.
491. Tewarson, A., SFPE Handbook of Fire Protection Engineering, 2nd Edition, p. 3–80, 1995.
492. Thomasi, G., The Basics of Fiber Optic Cable Design, Cabling Systems, March/April 2000.
493. UL Subject 2196, ‘Standard for Test of Fire Resistive Cables.’
494. Zalosh, R. and Lin, W.-H., Effects of a Gravel Bed on the Burning Rate and Extinguishment of High Flash Point Hydrocarbon Pool Fires, Proceedings of the 29th Annual Loss Prevention Symposium, Paper 4E, 1995.
495. Alpert, R.L. and Ward, E.J., Evaluation of Unsprinklered Fire Hazards, Fire Safety Journal, 7, 127–143, 1984.
496. Atallah, S. and Allan, D.S., Safe Separation Distances from Liquid Fuel Fires, Fire Technology, 7, 47–56, 1971.
497. Blackshear, P. (ed.), Heat Transfer in Fires, Scripta Book Co., Washington, DC, 1974.
498. Delichatsios, M., ‘Modeling of Aircraft Cabin Fires,’ Factory Mutual Research Corporation J.I. 0H5N5.BU, prepared for Federal Aviation Administration, 1984.
499. de Ris, J.N., Fire Radiation – a Review, 17th Symposium (International) on Combustion, pp. 1003–1016, 1979.
500. DiNenno, P., SFPE TP 82-9, 1982.
501. Drysdale, D., An Introduction to Fire Dynamics, John Wiley & Sons, 1985.
502. Heselden, A.J.M. and Hinkley, P.L., Measurement of the Transmission of Radiation through Water Sprays, Fire Technology, 1, 130–137, 1965.
503. Heskestad, G., Luminous Heights of Turbulent Diffusion Flames, Fire Safety Journal, 5, 103–108, 1983.
504. Howell, J.R., A Catalog of Radiation Configuration Factors, McGraw-Hill, 1985.
505. Mudan, K.S., Thermal Radiation Hazards from Hydrocarbon Pool Fires, Progress in Energy and Combustion Science, 10, 59–80, 1984.
506. Orloff, L., ‘Simplified Radiation Modeling of Pool Fires,’ 18th Symposium (International) on Combustion, The Combustion Institute, 1981, pp. 549–562.
507. Tewarson, A., Generation of Heat and Chemical Compounds in Fires, Chapter 3-4 in SFPE Handbook of Fire Protection Engineering, S.F.P.E. and NFPA, 1995.
508. A Large Loss for K Mart: A Lesson for Others, Record, published by Factory Mutual Engineering Corporation, 1983.
509. Allan, R., The Great New York Telephone Fire, IEEE Spectrum, 34–40, June 1975.
510. Best, R., $100 Million Fire in K Mart Distribution Center, Fire Journal, 36–42, March 1983.
511. Best, R., Fire Walls that Failed: The K Mart Corporation Distribution Center Fire, Fire Journal, 74–86, May 1983.
512. Business Insurance, “Sandoz will be liable for Rhine pollution”, Business Insurance, December 29 1986.
513. rd Issue, 1978.
514. ‘Communication Disaster at Ma BELL’s,’ W.N.Y.F.: With New York Firefighters, published by the New York City Fire Department, 3rd Issue, 1975.
515. Factory Mutual Loss Report No. 77-F-125, 1978.
516. FTI Report, “Hinsdale Central office Fire,” Joint Report of the State Five Marshall and Illinois Commerce Commission Staff, Forensics Technologies Int. Corp., 1989.
517. Harris, W.B., The Great Livonia Fire, Fortune, 132–135, 172–177, November 1953.
518. Hession, V.J., Fire Protection: A Burning Issue for Telcos, Telephony, March 14 1983.
519. How to Prevent Large-Loss Fires in Factories, Engineering News Record, 28–30, July 15 1954.
520. Isner, M. “Fire Investigation Report, Telephone Central office, Hinsdale, Illinois, May 8, 1988,” NFPA, 1989.
521. Juillerat, E.E. and Gaudet, R.E., Chicago’s McCormick Place Fire, Fire Journal, 14–22, May 1967.
522. Lathrop, J.K., World Trade Center Fire, Fire Journal, July 1975.
523. Lathrop, J.K., Telephone Exchange Fire, Fire Journal, July 1975.
524. Matter, B.E., ‘The fire in Schweizerhalle: A review of current activities to evaluate potential health hazards and environmental damage, and some suggestions from a toxicological viewpoint, Proceedings Conf. on Attitudes to Toxicology in the EEC (P.L. Chombers, ed.), Wiley, 1987, 163–169.
525. Pryor, A.J., ‘The Browns Ferry Nuclear Plant Fire,’ SFPE Technical Paper, 1976.
526. Salzmann, J.-J., “Schweizerhalle and Its Consequences,” Transcript of presentation to World Conference on Chemical Accidents, World Health Organization, July 1987.
527. “The Aftermath of the Sandoz Fire,” Fire Prevention, pp. 13–20, No. 199, May 1987.
528. “Schweizerhalle, The Fire on 1 November 1986 and Its Aftermath,” 1987 Sandoz Report received from Dr. George Suter, former Novartis Safety Director, December 2000.
529. Stein, L., The Triangle Fire, Lippincott Co., 1962.
530. ‘The General Motors Fire,’ Quarterly of the NFPA, October 1953.
531. Baker, W.E., Explosions in Air, University of Texas Press, 1973.
532. Baker, W.E., Kulesz, J.L., Richer, R.E., Bessey R.L., Westine, P.S., Parr, U.B. and Oldham, G.A., “Workbook for Estimating Effects of Accidental Explosions in Propellant Ground Handling and Transport Systems,” NASA CR 3023, August 1978.
533. Baker, W.E., Cox, P.A., Westine, P.S., Kulesz, J.J. and Strehlow, R.A., Explosion Hazards and Evaluation, Elseveir, New York, 1983.
534. Butlin, R.N. and Tonkin, P.S., ‘Pressures Produced by Gas Explosions in a Vented Compartment,’ Fire Research Station Note No. 1019, September 1974.
535. Din, F., ed., Thermodynamic Functions of Gases, Vol. 2, Air, Acetylene, Ethylene, Propane, and Arogon, Butterworth, London, 1962.
536. Hattwig, M., Selected Aspects of Explosion Venting, 2nd Intl. Symposium on Loss Prevention and Safety Promotion in the Process Industries, DECHEMA, 1978.
537. Kinney, G.F. and Graham, K.J., Explosive Shocks in Air, Springer-Verlag, 2nd Edition, 1985.
538. Strehlow, R.A., Accidental Explosions, American Scientist, 68, 1980.
539. U.S. Army Technical Manual No. 5-1300, ‘Structures to Resist the Effects of Accidental Explosions,’ Department of Defense triservice document also available as NAVFAC P-397, and AFM 88-22, 1987.
540. Whitney, M.G., Ketchum, D.E. and Oswald, C.J., ‘A Procedure to Assess Explosion Damage to Buildings of Common Construction,’ Minutes of the 23rd Explosives Safety Seminar, Department of Defense Explosives Safety Board, 1988.
541. Zalosh, R.G., Explosion Protection, SFPE Handbook of Fire Protection Engineering, Chapter 3-16, National Fire Protection Association, 1995.