Challenges in the understanding of microscale phenomena

41st Aerospace Sciences Meeting and Exhibit

Volumn , Issue , 2003, Pages

  Gad El Hak, Mohamed ^a  

^a VIRGINIA COMMONWEALTH UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AEROSPACE ENGINEERING; BATCH DATA PROCESSING; ELECTROSTATIC ACTUATORS; FLOW OF FLUIDS; MAGNETIC ACTUATORS; MANUFACTURE; MEMS; MICROELECTROMECHANICAL DEVICES;

CHARACTERISTIC LENGTH; MANUFACTURING PROCESS; MECHANICAL COMPONENTS; MICRO ELECTROMECHANICAL SYSTEM (MEMS); MICRO HEAT ENGINE; PRIMARY OBJECTIVE; PROCESSING TECHNIQUE; THERMAL ACTUATOR;

PNEUMATIC ACTUATORS;

EID: 85088718388     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2514/6.2003-439     Document Type: Conference Paper

References (46)

1. Anderson, J. L., and Quinn, J. A. (1972) "Ionic Mobility in Microcapillaries, " J. Chemical Phys. 27, pp. 1208-1209.
2. Atwood, B. T., and Schowalter, W. R. (1989) "Measurements of Slip at the Wall during Flow of High-Density Polyethylene through a Rectangular Conduit, " Rheologica Acta 28, pp. 134-146.
3. Bau, H. H. (1994) "Transport Processes Associated with Micro-Devices, " Thermal Sci. Eng. 2, pp. 172-178.
4. Brunauer, S. (1944) Physical Adsorption of Gases and Vapours, Oxford University Press, Oxford, Great Britain.
5. Chan, D. Y. C., and Horn, R. G. (1985) "Drainage of Thin Liquid Films, " J. Chemical Phys. 83, pp. 5311-5324.
6. Chapman, S., and Cowling, T. G. (1970) The Mathematical Theory of Non-Uniform Gases, third edition, Cambridge University Press, Cambridge, Great Britain.
7. Debye, P., and Cleland, R. L. (1959) "Flow of Liquid Hydrocarbons in Porous Vycor, " J. Appl. Phys. 30, pp. 843-849.
8. Den, L. M. (1990) "Issues in Viscoelastic Fluid Mechanics, " Annu. Rev. Fluid Mech. 22, pp. 13-34.
9. Dussan, E. B. (1976) "The Moving Contact Line: the Slip Boundary Condition, " J. Fluid Mech. 77, pp. 665-684.
10. Dussan, E. B. (1979) "On the Spreading of Liquids on Solid Surfaces: Static and Dynamic Contact Lines, " Annu. Rev. Fluid Mech. 11, pp. 371-400.
11. Dussan, E. B., and Davis, S. H. (1974) "On the Motion of Fluid-Fluid Interface Along a Solid Surface, " J. Fluid Mech. 65, pp. 71-95.
12. Fan, L.-S., Tai, Y.-C., and Muller, R. S. (1988) "Integrated Movable Micromechanical Structures for Sensors and Actuators, " in IEEE Transactions on Electronic Devices, vol. 35, pp. 724-730.
13. Fan, L.-S., Tai, Y.-C., and Muller, R. S. (1989) "ICProcessed Electrostatic Micromotors, " Sensors & Actuators 20, pp. 41-47.
14. Feynman, R. P. (1961) "There's Plenty of Room at the Bottom, " in Miniaturization, ed. H. D. Gilbert, pp. 282-296, Reinhold Publishing, New York.
15. Gad-el-Hak, M. (1999) "The Fluid Mechanics of Microdevices-The Freeman Scholar Lecture, " J. Fluids Eng. 121, pp. 5-33.
16. Gad-el-Hak, M. (2002a) The MEMS Handbook, CRC Press, Boca Raton, Florida.
17. Gad-el-Hak, M. (2002b) "Use of Continuum and Molecular Approaches in Microfluidics, " invited talk, AIAA Paper No. 2002-2868, AIAA, Reston, Virginia.
18. Gee, M. L., McGuiggan, P. M., Israelachvili, J. N., and Homola, A. M. (1990) "Liquid to Solidlike Transitions of Molecularly Thin Films under Shear, " J. Chemical Phys. 93, pp. 1895-1906.
19. Guvenc, M. G. (1985) "V-Groove Capillary for Low Flow Control and Measurement, " in Micromachining and Micropackaging of Transducers, eds. C. D. Fung, P. W. Cheung, W. H. Ko and D. G. Fleming, pp. 215-223, Elsevier, Amsterdam, the Netherlands.
20. Israelachvili, J. N. (1986) "Measurement of the Viscosity of Liquids in Very Thin Films, " J. Colloid Interface Sci. 110, pp. 263-271.
21. Israelachvili, J. N. (1991) Intermolecular and Surface Forces, second edition, Academic Press, New York.
22. Karniadakis, G. Em, and Beskok, A. (2002) Microflows: Fundamentals and Simulation, Springer-Verlag, New York.
23. Koplik, J., and Banavar, J. R. (1995) "Continuum Deductions from Molecular Hydroynamics, " Annu. Rev. Fluid Mech. 27, pp. 257-292.
24. Lighthill, M. J. (1963) "Introduction. Real and Ideal Fluids, " in Laminar Boundary Layers, ed. L. Rosenhead, pp. 1-45, Clarendon Press, Oxford, Great Britain.
25. Majumdar, A., and Mezic, I. (1998) "Stability Regimes of Thin Liquid Films, " Microscale Thermophys. Eng. 2, pp. 203-213.
26. Majumdar, A., and Mezic, I. (1999) "Instability of Ultra-Thin Water Films and the Mechanism of Droplet Formation on Hydrophilic Surfaces, " in Proc. ASME-JSME Thermal Engineering and Solar Energy Joint Conference, San Diego, California, 15-19 March. Also to appear in J. Heat Transfer.
27. Mastrangelo, C., and Hsu, C. H. (1992) "A Simple Experimental Technique for the Measurement of the Work of Adhesion of Microstructures, " in Technical Digest IEEE Solid-State Sensors and Actuators Workshop, pp. 208-212, IEEE, New York.
28. Migun, N. P., and Prokhorenko, P. P. (1987) "Measurement of the Viscosity of Polar Liquids in Microcapillaries, " Colloid J. of the USSR 49, pp. 894-897.
29. Moffatt, H. K. (1964) "Viscous and Resistive Eddies Near a Sharp Corner, " J. Fluid Mech. 18, pp. 1-18.
30. Nadolink, R. H., and Haigh, W. W. (1995) "Bibliography on Skin Friction Reduction with Polymers and Other Boundary-Layer Additives, " Appl. Mech. Rev. 48, pp. 351-459.
31. Nakagawa, S., Shoji, S., and Esashi, M. (1990) "A Micro-Chemical Analyzing System Integrated on Silicon Chip, " in Proc. IEEE: Micro Electro Mechanical Systems, Napa Valley, California, IEEE 90CH2832-4, IEEE, New York.
32. Pearson, J. R. A., and Petrie, C. J. S. (1968) "On Melt Flow Instability of Extruded Polymers, " in Polymer Systems: Deformation and Flow, eds. R. E. Wetton and R. W. Whorlow, pp. 163-187, Macmillian, London, Great Britain.
33. Pfahler, J. (1992) "Liquid Transport in Micron and Submicron Size Channels, " Ph. D. Thesis, University of Pennsylvania, Philadelphia, Pennsylvania.
34. Pfahler, J., Harley, J., Bau, H., and Zemel, J. N. (1990) "Liquid Transport in Micron and Submicron Channels, " Sensors & Actuators A 21-23, pp. 431-434.
35. Pfahler, J., Harley, J., Bau, H., and Zemel, J. N. (1991) "Gas and Liquid Flow in Small Channels, " in Symp. on Micromechanical Sensors, Actuators, and Systems, eds. D. Cho et al., ASME DSC-Vol. 32, pp. 49-60, ASME, New York.
36. Richardson, S. (1973) "On the No-Slip Boundary Condition, " J. Fluid Mech. 59, pp. 707-719.
37. Sharp, K. V. (2001) "Experimental Investigation of Liquid and Particle-Laden Flows in Microtubes, " Ph. D. Thesis, University of Illinois at Urbana-Champaign, Illinois.
38. Sharp, K. V., Adrian, R. J., Santiago, J. G., and Molho, J. I. (2002) "Liquid Flow in Microchannels, " in The Handbook of MEMS, ed. M. Gad-el-Hak, CRC Press, Boca Raton, Florida.
39. Tai, Y.-C., and Muller, R. S. (1989) "IC-Processed Electrostatic Synchronous Micromotors, " Sensors & Actuators 20, pp. 49-55.
40. Tang, W. C., Nguyen, T.-C., and Howe, R. T. (1989) "Laterally Driven Polysilicon Resonant Microstructures, " Sensors & Actuators 20, pp. 25-32.
41. Thompson, P. A., and Robbins, M. O. (1989) "Simulations of Contact Line Motion: Slip and the Dynamic Contact Line, " Nature 389, 25 September, pp. 360-362.
42. Thompson, P. A., and Troian, S. M. (1997) "A General Boundary Condition for Liquid Flow at Solid Surfaces, " Nature 389, pp. 360-362.
43. Tuckermann, D. B. (1984) "Heat Transfer Microstructures for Integrated Circuits, " Ph. D. Thesis, Stanford University, Stanford, California.
44. Tuckermann, D. B., and Pease, R. F. W. (1981) "High-Performance Heat Sinking for VLSI, " IEEE Electron Device Lett. EDL-2, no. 5, May.
45. Tuckermann, D. B., and Pease, R. F. W. (1982) "Optimized Convective Cooling Using Micromachined Structures, " J. Electrochemical Soc. 129, no. 3, C98, March.
46. Went, F. W. (1968) "The Size of Man, " American Scientist 56, pp. 400-413.