Advanced DC/DC Converters

Advanced DC/DC Converters

Volumn , Issue , 2003, Pages 1-760

  Luo, Fang Lin ^a   Ye, Hong ^a  

^a NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85075571071     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9780203492925     Document Type: Book

References (245)

1. Cúk, S., Basics of switched-mode power conversion: Topologies, magnetics, and control, in Cúk, S., Ed., Advances in Switched-Mode Power Conversion, Irvine, CA, Teslaco, 1995, vol. 2.
2. Erickson, R.W. and Maksimovic, D., Fundamentals of Power Electronics, 2nd ed., Kluwer Academic Publishers, Norwell, MA, 1999.
3. Kassakian, J., Schlecht, M., and Vergese, G., Principles of Power Electronics, Addison-Wesley, Reading, MA, 1991.
4. Kazimierczuk, M.K. and Bui, X.T., Class-E DC-DC converters with an inductive impedance inverter, IEEE-Transactions on Power Electronics, 4, 124, 1989.
5. Liu, Y. and Sen, P.C., New class-E DC-DC converter topologies with constant switching frequency, IEEE-Transactions on Industry Applications, 32, 961, 1996.
6. Luo, F.L., Re-lift circuit, a new DC-DC step-up (boost) converter, IEE-Electronics Letters, 33, 5, 1997.
7. Luo, F.L., Positive output Luo-converters, a series of new DC-DC step-up (boost) conversion circuits, in Proceedings of the IEEE International Conference PEDS 1997, Singapore, p. 882.
8. Luo, F.L., Re-lift converter: Design, test, simulation and stability analysis, IEE Proceedings on Electric Power Applications, 145, 315, 1998.
9. Luo, F.L., Negative output Luo-converters, implementing the voltage lift technique, in Proceedings of the Second World Energy System International Conference WES 1998, Toronto, Canada, 1998, 253.
10. Luo, F.L. and Ye, H., DC/DC conversion techniques and nine series Luo-converters, in Rashid M.H., Luo F.L., et al., Eds., Power Electronics Handbook, Academic Press, San Diego, 2001, chap. 17.
11. Maksimovic, D. and Cúk, S., Switching converters with wide DC conversion range, IEEE Transactions on Power Electronics, 6, 151, 1991.
12. Massey, R.P. and Snyder, E.C., High voltage single-ended DC/DC converter, in Proceedings of IEEE PESC ’77, Record. 1977. p. 156.
13. Middlebrook, R.D. and Cúk, S., Advances in Switched-Mode Power Conversion, TESLAco, Pasadena, CA, 1981, vols. 1 and 2.
14. Mohan, N., Undeland, T.M., and Robbins, W.P., Power Electronics: Converters, Applications and Design, 3rd ed., John Wiley & Sons, New York, 2003.
15. Oxner, E., Power FETs and Their Applications, Prentice Hall, NJ, 1982.
16. Rashid, M.H., Power Electronics: Circuits, Devices and Applications, 2nd ed., Prentice-Hall, New York, 1993.
17. Redl, R., Molnar, B., and Sokal, N.O., Class-E resonant DC-DC power converters: Analysis of operations, and experimental results at 1.5 Mhz, IEEE-Transactions on Power Electronics, 1, 111, 1986.
18. Severns, R.P. and Bloom, E., Modern DC-to-DC Switch Mode Power Converter Circuits, Van Nostrand Reinhold Company, New York, 1985.
19. Smedley, K.M. and Cúk, S., One-cycle control of switching converters, IEEE Transactions on Power Electronics, 10, 625, 1995.
20. Chen, X.F., Luo, F.L., and Ye, H., Modified positive output Luo converters, in Proceedings of the IEEE International Conference PEDS’99, Hong Kong, 1999, p. 450.
21. Farkas, T. and Schecht, M.F., Viability of active EMI filters for utility applications, IEEE Transactions on Power Electronics, 9, 328, 1994.
22. Hart, D., Introduction to Power Electronics, Prentice Hall, New York, 1997.
23. Jozwik, J.J. and Kazimerczuk, M.K., Dual sepic PWM switching-mode DC/DC power converter, IEEE Transactions on Industrial Electronics, 36, 64, 1989.
24. Krein, P., Elements of Power Electronics, Oxford University Press, 1998.
25. LaWhite, I.E. and Schlecht, M.F., Active filters for 1 MHz power circuits with strict input/output ripple requirements, IEEE Transactions on Power Electronics, 2, 282, 1987.
26. Luo, F.L., Positive output Luo-converters: Voltage lift technique, IEE Proceedings on Electric Power Applications, 146, 415, 1999.
27. Luo, F.L., Negative output Luo-Converters: Voltage lift technique, IEE Proceedings on Electric Power Applications, 146, 208, 1999.
28. Luo, F.L., Double output Luo-converters: Advanced voltage lift technique, IEE-Proceedings on Electric Power Applications, 147, 469, 2000.
29. Luo, F.L., Six self-lift DC/DC converters: Voltage-lift technique, IEEE- Transactions on Industrial Electronics, 48, 1268, 2001.
30. Luo, F.L., Seven self-lift DC/DC converters: Voltage-lift technique, IEE Proceedings on Electric Power Applications, 148, 329, 2001.
31. Martins, D.C., Application of the Zeta converter in switch-mode power supplies, in Proceedings of IEEE APEC’93, U.S, 1993, p. 214.
32. Maksimovic, D. and Cúk, S., A general approach to synthesis and analysis of quasiresonant converters, IEEE Transactions on Power Electronics, 6, 127, 1991.
33. Maksimovic, D. and Cúk, S., Constant-frequency control of quasi-resonant converters, IEEE Transactions on Power Electronics, 6, 141, 1991.
34. Massey, R.P. and Snyder, E.C., High voltage single-ended DC-DC converter, in Proceedings of IEEE PESC’77, Record. 1977, p. 156.
35. Newell, W.E., Power electronics-emerging from limbo, in Proceedings of IEEE Power Electronics Specialists Conference, U.S, 1993, p. 6.
36. Walker, J., Design of practical and effective active EMI filters, in Proceedings of Poweron 11, U.S, 1984, p. 1.
37. Zhu, W., Perreault, D.J., Caliskan, V., Neugebauer, T.C., Guttowski, S., and Kassakian, J.G., Design and evaluaion of an active ripple filter with Rogowski-coil current sensing, in Proceedings of the 30th Annual IEEE-PESC’99, U.S., 1999, p. 874.
38. Kassakian, J.G., Wolf, H-C., Miller, J.M., and Hurton, C.J., Automotive electrical systems, circa 2005, IEEE Spectrum, 8, 22, 1996.
39. Lander, C.W., Power Electronics, McGraw-Hill, London, 1993.
40. Luo, F.L., Luo-converters, a new series of positive-to-positive DC-DC step-up converters, Power Supply Technologies and Applications, Xi’an, China, 1, 30, 1998.
41. Luo, F.L., Positive output Luo-converters, the advanced voltage lift technique, Electrical Drives, Tianjin, China, 2, 47, 1999.
42. Luo, F.L. and Ye, H., Positive output super-lift Luo-converters, in Proceedings of IEEEPESC’ 2002, Cairns, Australia, 2002, p. 425.
43. Luo, F.L. and Ye, H., Positive output super-lift converters, IEEE Transactions on Power Electronics, 18, 105, 2003.
44. Pelley, B.R., Tryristor Phase Controlled Converters and Cycloconverters, John Wiley, New York, 1971.
45. Pressman, A.I., Switching Power Supply Design, 2nd ed., McGraw-Hill, New York, 1998.
46. Rashid, M.H., Power Electronics, 2nd ed., Prentice Hall of India Pvt. Ltd., New Delhi, 1995.
47. Trzynadlowski, A.M., Introduction to Modern Power Electronics, Wiley Interscience, New York, 1998.
48. Ye, H., Luo, F.L., and Ye, Z.Z., Widely adjustable high-efficiency high voltage regulated power supply, Power Supply Technologies and Applications, Xi’an, China, 1, 18, 1998.
49. Ye, H., Luo, F.L., and Ye, Z.Z., DC motor Luo-converter-driver, Power Supply World, Guangzhou, China, 2000, p. 15.
50. Baliga, B.J., Modern Power Devices, New York, John Wiley & Sons, 1987.
51. Luo, F.L., Advanced voltage lift technique — negative output Luo-converters, Power Supply Technologies and Applications, Xi’an, China, 3, 112, 1998.
52. Luo, F.L. and Ye, H., Negative output super-lift converters, IEEE Transactions on Power Electronics, 18, 268, 2003.
53. Luo, F.L. and Ye, H., Negative output super-lift Luo-converters, in Proceedings of IEEEPESC’ 2003, Acapulco, Mexico, 2003, p. 1361.
54. Mitchell, D.M., DC-to-DC Switching Regulator Analysis, New York: McGraw-Hill, 1988.
55. Ye, H., Luo, F.L., and Ye, Z.Z., Practical circuits of Luo-converters, Power Supply Technologies and Applications, Xi’an, China, 2, 19, 1999.
56. Chokhawala, R.S., Catt, J., and Pelly, B.R., Gate drive considerations for IGBT modules, IEEE Trans. On Industry Applications, 31, 603, 1995.
57. Czarkowski, D. and Kazimierczuk, M.K., Phase-controlled series-parallel resonant converter, IEEE Trans. On Power Electronics, 8, 309, 1993.
58. Kassakian, J.G., Schlecht, M.F., and Verghese, G.C., Principles of Power Electronics, Addison-Wesley, New York, 1991.
59. Khan, I.A., DC-to-DC converters for electric and hybrid vehicles, in Proceedings of Power Electronics in Transportation, 1994, p. 113.
60. Luo, F.L. and Ye, H., Positive output cascade boost converters, in Proceedings of IEEEIPEMC’ 2003, Xi’an, China, 866, 2002.
61. Luo, F.L. and Ye, H., Fundamentals of positive output cascade boost converters, submitted to IEEE Transactions on Power Electronics, 18, 1526, 2003.
62. Luo, F. L. and Ye, H., Development of positive output cascade boost converters, submitted to IEEE Transactions on Power Electronics, 18, 1536, 2003.
63. Poon, N.K. and Pong, M.H., Computer aided design of a crossing current resonant converter (XCRC), in Proceedings of IECON’94, Bologna, Italy, 1994, p. 135.
64. Steigerwald, R.L., High-frequency resonant transistor DC-DC converters, IEEE Trans. On Industrial Electronics, 31, 181, 1984.
65. Liu, K.H. and Lee, F.C., Resonant switches — a unified approach to improved performances of switching converters, in Proceedings of International Telecommunications Energy Conference, New Orleans, LA, U.S., 1984, p. 344.
66. Luo, F.L. and Ye, H., Fundamentals of negative output cascade boost converters, in Proceedings of IEEE-EPEMC’2003, Xi’an, China, 2003, p. 1896.
67. Luo, F.L. and Ye, H., Development of negative output cascade boost converters, in Proceedings of IEEE-EPEMC’2003, Xi’an, China, 2003, p. 1888.
68. Martinez, Z.R. and Ray, B., Bidirectional DC/DC power conversion using constantfrequency multi-resonant topology, in Proceedings of Applied Power Electronics Conf. APEC’94, Orlando, FL, U.S., 1994, p. 991.
69. Masserant, B.J. and Stuart, T.A., A high frequency DC/DC converter for electric vehicles, in Proceedings of Power Electronics in Transportation, 1994, p. 123.
70. Pong, M.H., Ho, W.C., and Poon, N.K., Soft switching converter with power limiting feature, IEE Proceedings on Electric Power Applications, 146, 95, 1999.
71. Luo, F.L. and Ye, H., Four-quadrant operating Luo-converter, Power Supply Technologies and Applications, Xi’an, China, 3, 82, 2000.
72. Luo, F.L. and Ye, H., Two-quadrant Luo-converter in forward operating, Power Supply World, Guangzhou, China, 2, 62, 2000.
73. Luo, F.L. and Ye, H., Two-quadrant Luo-converter in reverse operating, Power Supply World, Guangzhou, China, 3, 96, 2000.
74. Luo, F.L., Ye, H., and Rashid, M.H., Four-quadrant DC/DC zero-current-switching quasi-resonant Luo-converter, Power Supply Technologies and Applications, Xi’an, China, 5, 278, 1999.
75. Luo, F.L., Ye, H., and Rashid, M.H., Multiple quadrant operation Luo-converters, IEE Proceedings on Electric Power Applications, 149, 9, 2002.
76. Wang, J., Dunford, W.G., and Mauch, K., Some novel four-quadrant DC-DC converters, in Proceedings of IEEE-PESC’98, Fukuoka, Japan, 1998, p. 1775.
77. Chung, H., Hui, S.Y.R., and Tang, S.C., A low-profile switched-capacitor-based DC/DC converter, in Proceedings of AUPEC’97, 1997, p. 73.
78. Luo, F.L. and Ye, H., Fuzzy logic control for switched inductor two-quadrant DC/DC converter, in Proceedings of the International Conference IASTED’99, Honolulu, Hawaii, U.S., 1999, p. 176.
79. Luo, F.L. and Ye, H., Neural network control for switched inductor two-quadrant DC/DC converter, in Proceedings of the International Conference IASTED’99, Honolulu, Hawaii, U.S., 1999, p. 253.
80. Luo, F.L. and Ye, H., Two-quadrant DC/DC converter with switched capacitors, in Proceedings of the International Conference IPEC’99, Singapore, 1999, p. 641.
81. Luo, F.L. and Ye, H., Two-quadrant switched capacitor DC/DC converter, power supply Technologies and Applications, (Xi’an, China), 2, 62, 1999.
82. Luo, F.L. and Ye, H., Four-quadrant switched-inductor DC/DC Luo-converters, Power Supply World, (Guangzhou, China), 3, 210, 2000.
83. Luo, F.L. and Ye, H., Two-quadrant switched-inductor DC/DC Luo-converters, Power Supply World, (Guangzhou, China), 3, 138, 2000.
84. Luo, F.L., Ye, H., and Rashid, M.H., Four-quadrant switched capacitor Luo-converter, Power Supply Technologies and Applications, (Xi’an, China) 4, 134, 1999.
85. Luo, F.L., Ye, H., and Rashid, M.H., Switched inductor four-quadrant Luo-converter, in Proceedings of the IEEE-IAS Annual Meeting, IAS’99, Phoenix, Arizona, U.S., 1999, p. 1631.
86. Luo, F.L., Ye, H., and Rashid, M. H., Switched capacitor four-quadrant Luo-converter, in Proceedings of the IEEE-IAS Annual Meeting, IAS’99, Phoenix, Arizona, U.S. 1999, p. 1653.
87. Mak, O.C., Wong, Y.C., and Ioinovici, A., Step-up DC power supply based on a switched-capacitor circuit, IEEE Trans. On IE, 42, 90, 1995.
88. Ngo, K.D.T. and Webster, R., Steady-state analysis and design of a switched-capacitor DC-DC converter, IEEE Transactions on ANES, 30, 92, 1994.
89. Cheong, S.V., Chung, H., and Ioinovici, A., Inductorless DC-DC converter with high power density, IEEE Trans. On Industrial Electronics, 41, 208, 1994.
90. Chung, H.S., Hui, S.Y.R., Tang, S.C., and Wu, A., On the use of current control scheme for switched-capacitor DC/DC converters, IEEE Trans. Ind. Electron, 47, 238, 2000.
91. Gao, Y. and Luo, F.L., Theoretical analysis on performance of a 5V/12V push-pull switched capacitor DC/DC converter, in Proceedings of IEE-IPEC’2001, Singapore, 2001, p. 711.
92. Harris, W.S. and Ngo, K.D.T., Power switched-capacitor DC-DC converter: Analysis and design, IEEE Transactions on ANES, 33, 386, 1997.
93. Liu, J. and Chen, Z., A push-pull switched capacitor DC-DC set-up converter, Technology of Electrical Engineering, 1, 41, 1998.
94. Luo, F.L. and Ye H., Four-quadrant switched capacitor converter, in Proceedings of the 13th Chinese Power Supply Society IAS Annual Meeting, Shenzhen, China, 1999, p. 513.
95. Luo, F.L. and Ye, H., Positive output multiple-lift push-pull switched-capacitor Luoconverters, in Proceedings of IEEE-PESC’2002, Cairns Australia, 2002, p. 415.
96. Mak, O.C. and Ioinovici, A., Switched-capacitor inverter with high power density and enhanced regulation capability, IEEE Trans. On CAS-I, 45, 336, 1998.
97. Midgley, D. and Sigger, M., Switched-capacitors in power control, IEE Proc., 121, 703, 1974.
98. Tse, C.K., Wong, S.C., and Chow, M.H. L., On lossless switched-capacitor power converters, IEEE Trans. On PE, 10, 286, 1995.
99. Bhat, A.K.S., A fixed-frequency modified series-resonant converter: Analysis design, and experimental results, IEEE Trans. On Power Electronics, 10, 454, 1995.
100. Harada, K., Katsuki, A., Fujiwara, M., Nakajuma, H., and Matsushita, H., Resonant converter controlled by variable capacitance devices, IEEE Trans. On Power Electronics, 8, 404, 1993.
101. Hua, G., Leu, C., and Lee, F.C., Novel zero-voltage-transition PWM converters, in Proceedings of IEEE PESC’92, 1992, p. 557
102. Wang, K., Lee, F.C., Hua, G., and Borojevic, D., A comparative study of switching losses of IGBTS under hardswitching, zero-voltage-switching and zero-current-switching, in Proceedings of IEEE PESC '94, Record, 1994, p. 1196.
103. Jovanovic, M.M., Lee, F.C., and Chen, D.Y., A zero-current-switched off-line quasiresonant converter with reduced frequency range: Analysis, design, and experimental results, IEEE Trans. On PE, 4, 215, 1987.
104. Luo, F. L. and Ye, H., Negative output multiple-lift push-pull switched-capacitor Luoconverters, in Proceedings of IEEE-PESC’2003, Acapulco, Mexico, 2003, p. 1571.
105. Petterteig, A., Lode, J., and Undeland, T. M., IGBT turn-off losses for hard switching and with capacitive snubbers, in Proceedings of IEEE Industry Applications Society Annual Meeting, 1991, p. 1501.
106. Chen, K. and Stuart, T.A., A study of IGBT turn-off behavior and switching losses for zero-voltage and zero-current switching, in Proceedings of APEC '92, 1992, p. 411.
107. Chen, K., Masserant, B., and Stuart, T., A new family of ZVS/ZCS DC-DC converters for electric vehicles, in Proceedings of the IEEE Workshop on Power Electronics in Transportation, Record, 1992, p. 155.
108. Cho, J.G., Jeong, C.Y., and Lee, F.C.Y., Zero-voltage and zero-current-switching fullbridge PWM converter using secondary active clamp, IEEE Trans. On Power Electronics, 13, 601, 1998.
109. Cho, J.G., Sabate, J.A., Hua, G., and Lee, F.C., Zero-voltage and zero-current-switching full bridge PWM converter for high power applications, IEEE-PE Transactions, 11, 622, 1996.
110. Fuentes, R.C. and Hey, H.L., An improved ZCS-PWM commutation cell from IGBT’s application, IEEE Trans. On Power Electronics, 14, 939, 1999.
111. Garabandic, D., Dunford, W.G., and Edmunds, M., Zero-voltage-zero-current switching in high-output-voltage full-bridge PWM converters using the interwinding capacitance, IEEE Trans. On Power Electronics. 14, 343, 1999.
112. Gu, W.J. and Harada, K., A novel self-excited forward DC-DC converter with zerovoltage-switched resonant transitions using a saturable core, IEEE-PE Transactions, 10, 131, 1995.
113. Hua, G., Leu, C., and Lee, F. C., Novel zero-voltage-transition PWM converters, in Proceedings of IEEE PESC’92, 1992, p. 55.
114. Hua, G., Yang, X., Jiang, Y., and Lee, F.C., Novel zero-current transition PWM converters, in Proceedings of IEEE PESC’93, 1993, p. 544.
115. Hua, G., Yang, X., Jiang, Y., and Lee, F.C., Novel zero-current transition PWM converters, in Proceedings of IEEE Power Electronics Specialists Conf. Rec., 1993, p. 538.
116. Ivensky, G., Zeltser, I., Kats, A., and Yaakov, S.B., Reducing IGBT losses in ZCS series resonant converters, IEEE Trans. On Industrial Electronics. 46, 67, 1999.
117. Jovanovic, M.M., Lee, F.C., and Chen, D.Y., A zero-current-switched off-line quasiresonant converter with reduced frequency range: Analysis, design, and experimental results, IEEE Trans. On Power Electronics, 4, 215, 1987.
118. Jovanovic, M.M., Tabisz, W.A., and Lee, F.C.Y., High-frequency off-line power conversion using zero-voltage-switching quasi-resonant and multiresonant techniques, IEEE Trans. On Power Electronics, 4, 459, 1989.
119. Liu, K.H. and Lee, F.C., Zero-voltage switching techniques in DC/DC converter circuits, in Proceedings of Power Electronics Specialist's Conf. PESC’86 Vancouver, Canada, 1986, p. 58.
120. Liu, K.H., Oruganti, R., and Lee, F.C., Quasi-resonant converters-topologies and characteristics, IEEE Trans. On Power Electronics, 2, 62, 1987.
121. Luo, F.L. and Jin, L., 42/14V Two-Quadrant DC/DC soft-switching converter, in Proceedings of IEEE International Conference IEEE-PESC’00, Galway Ireland, 2000 p. 173.
122. Luo, F.L. and Ye, H., Two-quadrant zero-current-switching quasi-resonant DC/DC Luo-converter in reverse operation, Power Supply Technologies and Applications (Xi’an, China), 3, 113, 2000.
123. Luo, F.L. and Ye, H., Multi-quadrant DC/DC zero-current-switching quasi-resonant Luo-converter, in Proceedings of IEEE International Conference PESC’2001, Vancouver, Canada, 2001, p. 878.
124. Luo, F.L. and Ye, H., Zero-voltage-switching four-quadrant DC/DC quasi-resonant Luo-converter, in Proceedings of IEEE International Conference PESC’2001, Vancouver, Canada, 2001, p. 1063.
125. Luo, F.L. and Ye, H., Two-quadrant zero-current-switching quasi-resonant DC/DC Luo-converter in forward operation, Power Supply World, (Guangzhou, China) 2, 63, 2001.
126. Luo, F.L. and Ye, H., Two-quadrant zero-voltage-switching quasi-resonant DC/DC Luo-converter in forward operation, Power Supply Technologies and Applications (Xi’an, China), 4, 26, 2001.
127. Luo, F.L. and Ye, H., Two-quadrant zero-voltage-switching quasi-resonant DC/DC Luo-converter in reverse operation, Power Supply Technologies and Applications (Xi’an, China), 4, 185, 2001.
128. Luo, F.L., Ye, H., and Rashid, M. H., Four-quadrant zero-voltage-switching quasiresonant DC/DC Luo-converter, Power Supply Technologies and Applications (Xi’an, China), 3, 185, 2000.
129. Pong, M.H., Ho, W.C., and Poon, N.K., Soft switching converter with power limiting feature, IEE-EPA Proceedings, 146, 95, 1999.
130. Zhu, J.Y. and Ding, D., Zero-voltage- and zero-current-switched PWM DC-DC converters using active snubber, IEEE Trans. On Industry Applications, 35, 1406, 1999.
131. Zhu, J.Y. and Ding, D., Zero-voltage- and zero-current-switched PWM DC-DC converters using active snubber, IEEE-IA Transactions, 35, 1406, 1999.
132. Blanc, J., Practical Application of MOSFET Synchronous Rectifiers, in Proceedings of the Telecom-Eng. Conference INTELEC’1991, Japan, 1991, p. 495.
133. Chakrabarty, K., Poddar, G., and Banerjee, S., Bifurcation behavior of the buck converter, IEEE Trans. Power Electronics, 11, 439, 1996.
134. Cobos, J.A., O. Grcia J., and Sebastian, J.U., RCD clamp PWM forward converter with self driven synchronous rectification, in Proceedings of IEEE International Telecommunication Conference INTELEC’93, 1993, p. 1336.
135. Cobos, J.A., Sebastian, J., Uceda, J., Cruz, E. de la, and Gras, J.M., Study of the applicability of self-driven synchronous rectification to resonant topologies, in Proceedings of IEEE Power Electronics Specialists Conference, 1992, p. 933.
136. Garofalo, F., Marino, P., Scala, S., and Vasca, F., Control of DC-DC converters with linear optimal feedback and nonlinear feedforward, IEEE Trans. Power Electronics, 9, 607, 1994.
137. Jovanovic, M.M., Zhang, M.T., and Lee, F.C., Evaluation of synchronous-rectification efficiency improvement limits in forward converters, IEEE Transactions on Industrial Electronics, 42, 387, 1995.
138. Leu, C.S., Hua, G., and Lee, F.C., Analysis and design of RCD clamp forward converter, in Proceedings of the VPEC’92, 1992, p. 198.
139. Luo, F.L. and Chua, L.M., Fuzzy logic control for synchronous rectifier DC/DC converter, in Proceedings of the IASTED International Conference-ASC’00, Canada, 2000, p. 24.
140. Mattavelli, P., Rossetto, L., and Spiazzi, G., General-purpose sliding-mode controller for DC/DC converter applications, IEEE Trans. Power Electronics, 8, 609, 1993.
141. Ogata, K., Designing Linear Control Systems with MATLAB, Prentice-Hall, Upper Saddle River, NJ, 1994.
142. Phillips, C.P. and Harbor, R., Feedback Control System, Prentice-Hall, 1991.
143. Rim, C.T., Joung, G.B., and Cho, G.H., Practical switch based state-space modeling of DC-DC converters with all parasitics, IEEE Trans. Power Electronics, 6, 611, 1991.
144. Sakai, E. and Harada, K., Synchronous Rectifier for Low Voltage Switching Converter, in Proceedings of the Telecom-Eng. Conference INTELEC’1995, Japan, 1995, p. 471.
145. Yamashita, N., Murakami, N., and Yachi, Toshiaki., Conduction power loss in MOSFET synchronous rectifier with parallel-connected Schottky barrier diode, IEEE Transaction on Power Electronics, 13, 667, 1998.
146. Ang, S.S., Power Switching Converters, New York: Marcel Dekker, 1995.
147. Batarseh, I., Resonant converter topologies with three and four energy storage elements, IEEE Transactions on Power Electronics, 9, 64, 1994.
148. Belaguli, V. and Bhat, A.K. S., Series-parallel resonant converter operating in discontinuous current mode-analysis, design, simulation, and experimental results, IEEE Transactions on Circuits and System, 47, 433, 2000.
149. Bhat, A.K.S., Analysis and design of a series-parallel resonant converter with capacitive output filter, IEEE Transactions on Industry Applications, 27, 523, 1991.
150. Bhat, A.K.S. and Dewan, S.B., Analysis and design of a high frequency resonant converter using LCC type Commutation, in Proceedings of IEEE Industry Applications Society Annual Meeting, 1986, p. 657.
151. Cosby, Jr., M.C. and Nelms, R.M., A resonant inverter for electronic ballast applications, IEEE Transactions on Industry Electronics, 41, 418, 1994.
152. Johnson, S.D. and Erickson, R.W., Steady-state analysis and design of the parallel resonant converter, IEEE Transactions on Power Electronics, 3, 93, 1988.
153. Jones, C.B. and Vergez, J.P., Application of PWM techniques to realize a 2 MHz offline switching regulator, with hybrid implementations, in Proceedings of IEEE APEC’87, 1986, p. 221.
154. Kang, Y.G. and Upadhyay, A.K., Analysis and design of a half-bridge parallel resonant converter operating above resonance, IEEE Transactions on Industry Applications, 27, 386, 1991.
155. King, R.J. and Stuart, T.A., Modeling the full-bridge series-resonant power converter, IEEE Transaction on Aerospace and Electronic System, 18, 449, 1982.
156. Blanc, J., Practical Application of MOSFET Synchronous Rectifiers, in Proceedings of the Telecom-Eng. Conference INTELEC’1991, Japan, 1991, p. 495.
157. Chakrabarty, K., Poddar, G., and Banerjee, S., Bifurcation behavior of the buck converter, IEEE Trans. Power Electronics, 11, 439, 1996.
158. Cobos, J.A. O. Grcia, J., and Sebastian, J.U., RCD clamp PWM forward converter with self driven synchronous rectification, in Proceedings of IEEE International Telecommunication Conference INTELEC’93, 1993, p. 1336.
159. Cobos, J.A., Sebastian, J., Uceda, J., Cruz, E. de la, and Gras, J.M., Study of the applicability of self-driven synchronous rectification to resonant topologies, in Proceedings of IEEE Power Electronics Specialists Conference, 1992, p. 933.
160. Garofalo, F., Marino, P., Scala, S., and Vasca, F., Control of DC-DC converters with linear optimal feedback and nonlinear feedforward, IEEE Trans. Power Electronics, 9, 607, 1994.
161. Jovanovic, M.M., Zhang, M.T., and Lee, F.C., Evaluation of synchronous-rectification efficiency improvement limits in forward converters, IEEE Transactions on Industrial Electronics, 42, 387, 1995.
162. Leu, C.S., Hua, G., and Lee, F.C., Analysis and design of RCD clamp forward converter, in Proceedings of the VPEC’92, 1992, p. 198.
163. Luo, F.L. and Chua, L.M., Fuzzy logic control for synchronous rectifier DC/DC converter, in Proceedings of the IASTED International Conference-ASC’00, Canada, 2000, p. 24.
164. Mattavelli, P., Rossetto, L., and Spiazzi, G., General-purpose sliding-mode controller for DC/DC converter applications, IEEE Trans. Power Electronics, 8, 609, 1993.
165. Ogata, K., Designing Linear Control Systems with MATLAB, Prentice-Hall, Upper Saddle River, NJ, 1994.
166. Phillips, C.P. and Harbor, R., Feedback Control System, Prentice-Hall, 1991.
167. Rim, C.T., Joung, G.B., and Cho, G.H., Practical switch based state-space modeling of DC-DC converters with all parasitics, IEEE Trans. Power Electronics, 6, 611, 1991.
168. Sakai, E. and Harada, K., Synchronous Rectifier for Low Voltage Switching Converter, in Proceedings of the Telecom-Eng. Conference INTELEC’1995, Japan, 1995, p. 471.
169. Yamashita, N., Murakami, N., and Yachi, Toshiaki., Conduction power loss in MOSFET synchronous rectifier with parallel-connected Schottky barrier diode, IEEE Transaction on Power Electronics, 13, 667, 1998.
170. Ang, S.S., Power Switching Converters, New York: Marcel Dekker, 1995.
171. Batarseh, I., Resonant converter topologies with three and four energy storage elements, IEEE Transactions on Power Electronics, 9, 64, 1994.
172. Belaguli, V. and Bhat, A.K. S., Series-parallel resonant converter operating in discontinuous current mode-analysis, design, simulation, and experimental results, IEEE Transactions on Circuits and System, 47, 433, 2000.
173. Bhat, A.K.S., Analysis and design of a series-parallel resonant converter with capacitive output filter, IEEE Transactions on Industry Applications, 27, 523, 1991.
174. Bhat, A.K.S. and Dewan, S.B., Analysis and design of a high frequency resonant converter using LCC type Commutation, in Proceedings of IEEE Industry Applications Society Annual Meeting, 1986, p. 657.
175. Cosby, Jr., M.C. and Nelms, R.M., A resonant inverter for electronic ballast applications, IEEE Transactions on Industry Electronics, 41, 418, 1994.
176. Johnson, S.D. and Erickson, R.W., Steady-state analysis and design of the parallel resonant converter, IEEE Transactions on Power Electronics, 3, 93, 1988.
177. Jones, C.B. and Vergez, J.P., Application of PWM techniques to realize a 2 MHz offline switching regulator, with hybrid implementations, in Proceedings of IEEE APEC’87, 1986, p. 221.
178. Kang, Y.G. and Upadhyay, A.K., Analysis and design of a half-bridge parallel resonant converter operating above resonance, IEEE Transactions on Industry Applications, 27, 386, 1991.
179. King, R.J. and Stuart, T.A., Modeling the full-bridge series-resonant power converter, IEEE Transaction on Aerospace and Electronic System, 18, 449, 1982.
180. Kisch, J.J. and Perusse, E.T., Megahertz power converters for specific power systems, in Proceedings of IEEE APEC’87, 1987, p. 115.
181. Kislovski, A.S., Redl, R., and Sokal, N.O., Dynamic Analysis of Switching-Mode DC/DC Converters, New York, Van Nostrand Reinhold, 1991.
182. Mitchell, D.M., DC-DC Switching Regulator Analysis, New York, McGraw-Hill, 1988.
183. Nathan, B.S. and Ramanarayanan, V., Analysis, simulation and design of series resonant converter for high voltage applications, in Proceedings of IEEE International Conference on Industrial Technology’00, 2000, p. 688.
184. Severns, R.P., Topologies for three-element resonant converters, IEEE Transactions on Power Electronics, 7, 89, 1992.
185. Steigerwald, R.L., A comparison of half-bridge resonant converter topologies, IEEE Transactions on Power Electronics, 3, 174, 1988.
186. Tanaka, J., Yuzurihara I., and Watanabe, T., Analysis of a full-bridge parallel resonant converter, in Proceedings of 13th International Telecommunications Energy Conference, 1991, p. 302.
187. Witulski, A. and Erickson, R.W., Steady-state analysis of the series resonant converter, IEEE Transactions on Aerospace Electronics, 21, 791, 1985.
188. Batarseh, I., Resonant converter topologies with three and four energy storage elements, IEEE Transactions on PE, 9, 64, 1994.
189. Batarseh, I., Liu, R., and Lee, C.Q., State-plan analysis and design of parallel resonant converter with LCC-type commutation, in Proceedings of IEEE-SICE’88, Tokyo, 1988, p. 831.
190. Chen, J. and Bonert, R., Load independent AC/DC power supply for higher frequencies with sinewave output, IEEE Transactions on IA, 19, 223, 1983.
191. Kazimierczuk, M.K. and Cravens, R.C., Current-source parallel-resonant DC/AC inverter with transformer, IEEE Transactions on PE,, 11, 275, 1996.
192. Kazimierczuk, M.K. and Czarkowski, D., Resonant Power Converters, John Wiley, New York, 1995.
193. Liu, R., Batarseh, I., and Lee, C.Q., Comparison of performance characteristics between LLC-type and conversional parallel resonant converters, IEE Electronics Letters, 24, 1510, 1988.
194. Luo, F.L. and Ye, H., Investigation of π-CLL current source resonant inverter, in Proceedings of IEEE-IPEMC’03, Xi’an China, 2003, p. 658.
195. Matsuo, M., Suetsugu, T., Mori, S., and Sasase, I., Class DE current-source parallel resonant inverter, IEEE Transactions on IE, 46, 242, 1999.
196. Severns, R.P., Topologies for three-element converters, IEEE Transactions on PE, 7, 89, 1992.
197. Van Wyk, J.D. and Snyman, D.B., High frequency link systems for specialized power control applications, in Proceedings of IEEE-IAS’82 Annual Meeting, 1982, p. 793.
198. Bhat, A.K.S., Analysis and design of a series-parallel resonant converter, IEEE Transactions on Power Electronics, 8, 1, 1993.
199. Bhat, A.K.S. and Swamy, M.M., Analysis and design of a high-frequency parallel resonant converter operating above resonance, in Proceedings of IEEE Applied Power Electronics Conference, 1988, p. 182.
200. Forsyth, A.J. and Ho, Y.K. E., Dynamic characteristics and closed-loop performance of the series-parallel resonant converter, IEE Proceedings-Electric Power Applications, 143, 345, 1996.
201. Ho, W.C. and Pong, M.H., Design and analysis of discontinuous mode series resonant converter, in Proceedings of the IEEE International Conference on Industrial Technology, 1994, p. 486.
202. Hua, G., Yang, E.X., Jiang, Y., and Lee, F.C.Y., Novel zero-voltage-transition PWM converters, IEEE Transaction on Power Electronics, 9, 213, 1994.
203. Keown, J., OrCAD PSpice and Circuit Analysis, 4th ed., New Jersey, Prentice Hall, 2001.
204. Liu, K.H., Oruganti, R., and Lee, F.C., Resonant switches-topologies and characteristics, in Proceedings of IEEE Power Electronics Specialists Conference, 1985, p. 106.
205. Luo F.L. and Wan, J.Z., Bipolar current source applying to cascade double gamma-CL CSRI, in Proceedings of UROP Congress’2003, Singapore, 2003, p. 328.
206. Luo, F.L. and Ye, H., Analysis of a double Γ-CL current source resonant inverter, in Proceedings of IEEE IAS Annual Meeting IAS-2001, Chicago, U.S., 2001, p. 289.
207. Luo, F.L. and Ye, H., Investigation and verification of a double Γ-CL current source resonant inverter, Proceedings of IEE on Electric Power Applications, 149, 369, 2002.
208. Luo, F.L. and Zhu, J.H., Verification of a double Γ-CL current source resonant inverter, in Proceedings of IEE-IPEC’2003, Singapore, 2003, p. 386.
209. Oruganti, R. and Lee, F.C., State-plane analysis of parallel resonant converter, in Proceedings of IEEE Power Electronics Specialists Conference, 1985, p. 56.
210. Vorpérian, V., Analysis of Resonant Converter, Ph.D dissertation, California Institute of Technology, Pasadena, May 1984
211. Agarwal, V. and Bhat, A.K.S., Small-signal analysis of the LCC-type parallel resonant converter using discrete time domain modeling, in Proceedings of IEEE Power Electronics Specialists Conference, 1994, p. 805.
212. Bhat, K.S., Analysis and design of a series-parallel resonant converter with capacitive output filter, IEEE Transactions on Industry Applications, 27, 523, 1991.
213. Bhat, K.S. and Swamy, M.M., Analysis and design of a parallel resonant converter including the effect of high-frequency transformer, in Proceedings of IEEE Power Electronics Specialists Conference, 1989, p. 768.
214. Deb, S., Joshi, A., and Doradla, S.R., A novel frequency domain model for a parallel resonant converter, IEEE Transactions on Power Electronics, 3, 208, 1988.
215. Forsyth, A. J., Ho, Y.K. E., and Ong, H.M., Comparison of small-signal modeling techniques for the series-parallel resonant converter, in Proceedings of IEE Conference on Power Electronics and Variable Speed Drives, 1994, p. 268.
216. Johnson, S.D., Steady-state analysis and design of the parallel resonant converter, IEEE Transactions on Power Electronics, 3, 93, 1988.
217. Kang, Y.G. and Upadhyay, A.K., Analysis and design of a half-bridge parallel resonant converter, IEEE Transactions on Power Electronics, 3, 254, 1988.
218. Kit, S.K., Recent Developments in Resonant Power Conversion, CA, Intertec Communications, 1988.
219. Liu, K.H. and Lee, F.C., Zero-voltage switching technique in DC/DC converters, in Proceedings of IEEE Power Electronics Specialists Conference, 1986, 58.
220. Middlebrook, R.D. and Cúk, S., A general unified approach to modeling switching converter power stages, in Proceedings of IEEE Power Electronics Specialists Conference, 1976, p. 18.
221. Nathan, B.S. and Ramanarayanan, V., Analysis, simulation and design of series resonant converter for high voltage applications, in Proceedings of IEEE International Conference on Industrial Technology 2000, 2000, p. 688.
222. Ranganathan, V.T., Ziogas, P.D., and Stefenovic, V.R., A regulated DC-DC voltage source converter using high-frequency link, in Proceedings of IEEE Industry Application Society Conference, 1981, p. 917.
223. Sanders, S., Noworolski, J., Liu, X., and Verghese, G., Generalized averaging method for power conversion circuits, in Proceedings of IEEE Power Electronics Specialists Conference, 1989, p. 273.
224. Swamy, M.M. and Bhat, A.K.S., A comparison of parallel resonant converters operating in lagging power factor mode, IEEE Transactions on Power Electronics, 9, 181, 1994.
225. Verghese, G., Elbuluk, M., and Kassakian, J., Sampled-data modeling for power electronics circuits, in Proceedings of IEEE Power Electronics Specialists Conference, 1984, p. 316.
226. Vorperian, V. and Cúk, S., A complete DC analysis of the series resonant converter, in Proceedings of IEEE Power Electronics Specialist Conference, 1982, p. 85.
227. Vorpérian, V. and Cúk, S., Small-signal analysis of resonant converters, in Proceedings of IEEE Power Electronics Specialists Conference, 1983, p. 269.
228. Yang, E.X., Choi, B.C., Lee, F.C., and Cho, B.H., Dynamic analysis and control design of LCC resonant converter, in Proceedings of IEEE Power Electronics Specialists Conference, 1992, p. 941.
229. Zhu, J.H. and Luo, F.L., Cascade reverse double Γ-LC resonant power converter, in Proceedings of IEEE-PEDS’03, Singapore, 2003, p. 326.
230. Rectifier Applications Handbook, 3rd ed., Phoenix, Ariz: Motorola, Inc., 1993. Bird, B.M. and King, K.G., An Introduction to Power Electronics, New York, Prentice-Hall, 1983.
231. Dwyer, R. and Mueller, D., Selection of Transformers for Commercial Building, in Proceedings of IEEE-IAS’92, U.S., 1992, p. 1335.
232. Lee, Y.S., Computer-Aided Analysis and Design of Switch-Mode Power Supplies, New York: Marcel Dekker, Inc., 1993.
233. Thorborg, K., Power Electronics, Prentice-Hall International Ltd., UK, 1988.
234. Todd, P., UC3854 Controlled Power Factor Correction Circuit Design, Application Note U-134, Unitrode Corp, 1995.
235. Bech, M., Blaabjerg, F., and Pederson, J., Random modulation techniques with fixed switching frequency for three-phase power converters, IEEE Transactions on PE, 15, 753, 2000.
236. Bogart, T.F., Jr., Linear Electronics, Maxwell Macmillan International, New York, 1994.
237. Chung, H., Hui, S., and Tse, K., Reduction of power converter EMI emission using soft-switching technique, IEEE Trans on Electromagnetic Compatibility, 40, 282, 1998.
238. Consoli, A., Musumeci, S., Oriti, G., and Testa, A., An innovative EMI reduction technique in power converters, IEEE Transactions on Electromagnetic Compatibility, 38, 567, 1996.
239. Heerema, M.D., Designing for Electromagnetic Compatibility, Proceedings of Hewlett-Packard Seminar, 1996.
240. Horowitz, P. and Hill, W., The Art of Electronics, 2nd ed., Cambridge, 1990.
241. Luo, F.L., Luo-resonator — a PWM signal generator applied to all DC/DC converters, Power Supply Technologies and Applications, Xi’an, China, 3, 198, 2000.
242. Luo, F.L. and Ye, H., Investigation of EMI, EMS, and EMC in power DC/DC converters, in Proceedings of IEEE-PEDS’03, Singapore, 2003, p. 628.
243. Tihanyi, L., Electromagnetic Compatibility in Power Electronics, J. K. Eckert & Company, Inc., Sarasota, FL, 1995.
244. Tse, K., Chung, H., and Hui, S., A comparative study of carrier-frequency modelation techniques for conducted EMI suppression in PWM converters, IEEE Transactions on IE, 49, 618, 2002.
245. Wait, J.V., Huelsman, L.P., and Korn, G.A., Introduction to Operational Amplifier Theory and Applications, 2nd ed., McGraw-Hill Inc., New York, 1992.