Diesel-PPC engine: Predictive full cycle modeling with reduced and detailed chemistry

SAE Technical Papers

Volumn , Issue , 2011, Pages

  Tunér, Martin ^a   Fröjd, Karin ^b   Seidel, Lars ^b   Mauss, Fabian ^b  

^a LUND UNIVERSITY   (Sweden)

^b LOGE AB Ideon Science Park   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

ENGINES; HEPTANE; PARAFFINS;

DETAILED CHEMISTRY; DIESEL SUBSTITUTES; ENGINE SIMULATION; HIGH EFFICIENCY AND LOW EMISSION; PARAMETRIC STUDY; PARTIALLY PREMIXED COMBUSTION; PRESCRIBED BURN; REDUCED CHEMISTRY;

COMBUSTION;

EID: 85072508293     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2011-01-1781     Document Type: Conference Paper

References (39)

1. IEA, World Energy Outlook 2004, www.iea.org
2. Stanton, D., High Efficiency Clean Combustion for SuperTruck, DEER 2010.
3. Manente, V., Johansson, B., Tunestal, P., Zander, C.-G., and Cannella, W., "An Advanced Internal Combustion Engine Concept for Low Emissions and High Efficiency from Idle to Max Load Using Gasoline Partially-Premixed Combustion". SAE Paper 2010-01-2198, 2010.
4. Olsson, J., et al., "A Turbo Charged Dual Fuel HCCI Engine" SAE 2001-01-1896.
5. Kokjohn, S., Hanson, R., Splitter, D., and Reitz, R., "Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending," SAE Int. J. Engines 2 (2): 24-39, 2010, doi: 10.4271/2009-01-2647.
6. Chen, J.H., Choudhary, A., Supinski, B., DeVries, J., Hawkes, E.R., Klasky, S., Liao, W.K., Ma, K.L., Mellor-Crummey, J., Podhorszki, N., Sankaran, R., Shende, S., Yoo, C.S., Terascale direct numerical simulations of turbulent combustion using S3D, Comput. Sci. Disc. 2, 1-31 (2009).
7. Lehtiniemi, H., Zhang, Y., Rawat, R., Mauss, F., "Efficient 3-D CFD Combustion Modeling with Transient Flamelet Models". SAE 2008-01-0957.
8. Fridriksson, H., Hajireza, S., Sundén, B., Tunér, M., "CFD Investigation of Heat Transfer in a Diesel Engine with Diesel and PPC Combustion Modes" JSAE 20119177, SAE 2011-01-1838.
9. Joelsson, T., Yu, R., Bai, X., Vressner, A., et al., "Large Eddy Simulation and Experiments of the Auto-Ignition Process of Lean Ethanol/Air Mixture in HCCI Engines," SAE Int. J. Fuels Lubr. 1 (1): 1110-1119, 2009, doi: 10.4271/2008-01-1668.
10. Vermorel, O., Richard, S., Colin, O., Angelberger, C., Benkenida, A., and Veynante, D., 2009, "Towards the understanding of cyclic variability in a spark ignited engine using multi-cycle LES," Combustion and Flame, 156, pp. 1525-1541.
11. Westin, F., Ångström, H-E., Simulation of a Turbocharged SI-Engine with Two Software and Comparison with Measured Data, SAE Paper 2003-01-3124, 2003
12. Kolade, B., Morel, T., Kong, S-C., Coupled 1-D/3-D Analysis of Fuel Injection and Diesel Engine Combustion, SAE 2004-01-0928, 2004
13. Montorsi, L., Mauss, F., Bianchi, G. M., Bhave, A., and Kraft, M., 2003, Analysis of the HCCI Combustion of a Turbocharged Truck Engine Using a Stochastic Reactor Model, ASME ICE Division, ICES-2003-681.
14. Tunér, M., Pasternak, M., Mauss, F., Bensler, H., A PDF-Based Model for Full Cycle Simulation of Direct Injected Engines, SAE 2008-01-1606.
15. www.gtisoft.com
16. www.diginars.com
17. Kraft, M., Stochastic Modelling of Turbulent Reacting Flow in Chemical Engineering, 1998, Reihe 6 (391), pp. 1-109 (VDI Verlag, Fortschrittsberichte des VDI).
18. Bhave, A., Balthasar, M., Kraft, M., Mauss, F., Analysis of a natural gas fuelled homogeneous charge compression ignition engine with exhaust gas recirculation using a stochastic reactor model, Int. J. Engine Res., 5 (1): 93-103, 2004 a.
19. Tunér, M., Ph.D. Thesis: Stochastic Reactor Models for Engine Simulations. Division of Combustion Physics, Lund University, 2008. ISSN 1102-8718
20. Woschni, G., A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine, SAE 670931
21. Curl, R. L., Dispersed Phase Mixing: I. Theory and Effects in Simple Reactors, A.I. Ch.E. Journal, Vol. 9, No. 2, pp. 175-181, 1963.
22. Samuelsson, K., Gogan, A., Netzell, K., Lehtiniemi, H., Sunden, B., Mauss, F., "Modeling Diesel Engine Combustion and Pollutant Formation Using a Stochastic Reactor Model Approach" Intl. Conf. Clean Diesel Combustion, Lund, 2005.
23. Tsurushima, T., A new skeletal PRF kinetic model for HCCI combustion, Proceedings of the Combustion Institute 2009.
24. Seidel, L., Leon, L., Mauss, F., Zeuch, T., Moreac, G., "A comprehensive mechanism for fuel mixtures including oxygenated species". European Combustion Meeting 2011, Cardiff.
25. Ahmed, S.S., A Detailed Modeling Study for Primary Reference Fuels and Fuel Mixtures and Their Use in Engineering Application. PhD Thesis Combustion Physics, Lund University 2006.
26. Hilbig, M., Seidel, L., Wang, X., Mauss, F., Zeuch, T., Computer Aided Detailed Mechanism Generation for Large Hydrocarbons: n-Decane. Approved for publication at 23rd ICDERS 24-27 July 2011.
27. Mauss, F., (1998) Entwicklung eines kinetischen Modells der Ruβbildung mit schneller Polymerisation, D 82 (RWTH Aachen), ISBN 3-89712-152-2.
28. Schuetz, C.A., and Frenklach, M., (2002) Nucleation of soot: molecular dynamics simulations of pyrene dimerization. Proc. Combust. Instit., 29, 2307-2314.
29. Mitchell, P., and Frenklach, M., (2003) Particle aggregation with simultaneous surface growth. Phys. Rev. E, 67 (6), Art. No. 061407 Part 1.
30. Frenklach, M., and Wang, H., (1990) Detailed modeling of soot particle nucleation and growth. Proc. Combust. Instit., 23, 1559-1566.
31. Kazakov, A., and Frenklach, M., (1998) Dynamic modeling of soot particle coagulation and aggregation: implementation with the method of moments and application to high-pressure laminar premixed flames. Combust. Flame, 114, 484-501. (Pubitemid 28243848)
32. Frenklach, M., (2002) Method of moments with interpolative closure. Chem. Eng. Sci., 57, 2229-2239. (Pubitemid 34838257)
33. Dukowicz, J.K.,. Quasi-Steady Droplet Phase Change in the Presence of Convection, Los Alamos Scientific Laboratory, LA-7997-MS, Los Alamos, New Mexico, 1979
34. Tunér, M., Karlsson, M., Mauss, F., Studying HCCI Combustion and its Cyclic Variations versus Heat Transfer, Mixing and Discretization using a PDF based approach, SAE 2009-01-0667.
35. Zeuch, Thomas, Moréac, Gladys, Ahmed, Syed Sayeed, and Mauss, Fabian,. A comprehensive skeletal mechanism for the oxidation of n-heptane generated by chemistryguided reduction. Combustion and Flame, 155 (4): 651674, 2008.
36. Curran, H. J., Gaffuri, P., Pitz, W. J., and Westbrook, C. K., "A Comprehensive Modeling Study of iso-Octane Oxidation," Combustion and Flame 129: 253-280 (2002). (Pubitemid 34553323)
37. Tsurushima, T., Shimazaki, N., Asaumi, Y., Gas sampling analysis of combustion processes in a homogeneous charge compression ignition engine. International Journal of Engine Research. 1 (4) 2000.
38. Danielsson, D., Erlandsson, L., Comparing Exhaust Emissions from Heavy Duty Diesel Engines using EN 590 vs. MK1 Diesel Fuel. AVL MTC 0015, 2010
39. nd edition, Springer, 2010