Detailed kinetic modeling of HCCI combustion with isopentanol

SAE Technical Papers

Volumn , Issue , 2011, Pages

  Tsujimura, Taku ^a   Pitz, William J ^b   Yang, Yi ^c   Dec, John E ^c  

^a MRE   (United States)

^b LAWRENCE LIVERMORE NATIONAL LABORATORY   (United States)

^c SANDIA NATIONAL LABORATORIES   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ETHANOL; GASOLINE; INTERNAL COMBUSTION ENGINES; ISOMERS; KINETIC THEORY; PARAFFINS; PRESSURE EFFECTS; SHOCK TUBES;

COMBUSTION PROPERTY; DETAILED CHEMICAL KINETIC; DETAILED KINETIC MODELING; HIGH-TEMPERATURE CHEMISTRIES; INTERMEDIATE TEMPERATURES; OPERATING CONDITION; RAPID COMPRESSION MACHINE; VOLUMETRIC ENERGY DENSITIES;

COMBUSTION;

EID: 85072499536     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: None     Document Type: Conference Paper

References (38)

1. U.S. Department Of Energy, Alternative Fuels & Advanced Vehicle Data Center, URL: http://www.afdc.energy.gov/afdc/ethanol/index.html
2. European Commission Energy, Renewable Energy, URL: http://ec.europa.eu/ energy/renewables/biofuels/biofuels-en.htm
3. Sperling, D., and Gordon, D., Two billion cars: driving toward sustainability, Oxford University Press, New York, pp. 95-96, 2009.
4. Atsumi, S., Hanai, T., and Liao, C. J., "Non-fermentative pathways for synthesis of branched-chain higher alcohols as biofuels," Nature Letters, Vol. 451, No. 3, 2008.
5. Department of Energy Joint BioEnergy Institute, URL: http://www.jbei.org/
6. Peralta-Yahya, P.P., and Keasling, J.D., "Advanced biofuels production in microbes," Biotechnology Journal, Vol. 5, No. 2, p. 147-162, 2010.
7. Yang, Y., Dec, J., Dronniou, N., and Simmons, B., "Characteristics of Isopentanol as a Fuel for HCCI Engines," SAE Int. J. Fuels Lubr. 3 (2): 725-741, 2010, doi: 10.4271/2010-01-2164.
8. Yang, B., Oβwald, P., Li, Y., Wang, J., Wei, L., Tian, Z., Qi, F., and Kohse-Höinghaus, K., "Identification of combustion intermediates in isomeric fuel-rich premixed butanol-oxygen flames at low pressure," Combustion and Flame, 148, pp. 198-209, 2007.
9. Moss, J.T., Berkowitz, A.M., Oehlschlaeger, M.A., Biet, J., Warth, V., Glaude, P., and Battin-Leclerc, F., "An Experimental and Kinetic Modeling Study of the Oxidation of the Four lsomers of Butanol," J. Phys. Chem. A, 112, pp. 10843-10855, 2008.
10. Sarathy, S.M., Thomson, M.J., Togbé C., Dagaut, P., Halter, F., and Mounaim-Rousselle, C., "An experimental and kinetic modeling study of n -butanol combustion," Combustion and Flame, 156, pp. 852-864, 2009.
11. Black, G., Curran, H.J., Pichon, S., Simmie, J.M., and Zhukov, V., "Bio-butanol: Combustion properties and detailed chemical kinetic model," Combustion and Flame, 157, pp. 363-373, 2010.
12. Velio, P.S, Wang, Y.L., Egolfopoulos, F.N., and Westbrook, C.K., "A comparative experimental and computational study of methanol, ethanol, and n -butanol flames," Combustion and Flame, 157, pp. 1989-2004, 2010.
13. Grana, R., Frassoldati, A., Fravelli, T., Niemann, U., Ranzi, E., Seiser, R., Cattolica, R., and Seshadri, K., "An experimental and kinetic modeling study of combustion of isomers of butanol," Combustion and Flame, 157, pp. 2137-2154, 2010.
14. Harper, M.R., Van Geem, K.M., Pyl, S.P., Marin, G.B., and Gree, W.H., "Comprehensive reaction mechanism for n-butanol pyrolysis and combustion," Combustion and Flame, 158, pp. 16-41, 2011.
15. Sung, C., "Chemical Kinetics Studies of Alternative Fuels," Presentation file used in Multi-Agency Coordination Committee for Combustion Research (MACCCR) 3rd Annual Fuels Research Review, Sep. 2010, URL: http://kinetics.nist.gov/RealFuels/macccr/macccr2010.html
16. Combustion Chemistry developed in Lawrence Livermore National Laboratory, URL: https://www-pls.llnl.gov/?url=science-and-technology-chemistrv-combustion
17. 2 Reaction," J. Phys. Chem. A, 113, pp. 8923-8933, 2009.
18. Schocker, A., Uetake, M., Kanno, N., Koshi, M., and Tonokura, K., "Kinetics and rate constants of the reaction CH2OH+O2 - >CH2O+HO2 in the temperature range of 236-600 K," J. Phys. Chem. A, 111, pp. 6622-6627, 2007.
19. Ritter, E.R., and Bozzelli, J.W., "THERM. Thermodynamic property estimation for gas phase radicals and molecules," Int. J. Chem. Kinet, 23, pp. 767-778, 1991.
20. CHEMKIN-PRO, Reaction Design Inc., San Diego, CA, 2008. URL: www.reactiondesign.com
21. Mehl, M., Pitz, W.J., Westbrook, C.K., and Curran, H.J., "Kinetic Modeling of Gasoline Surrogate Components and Mixtures under Engine Conditions," Proceedings of the Combustion Institute 33 (1) pp. 193-200, 2011.
22. Mehl, M., Pitz, W., Sjöberg, M., and Dec, J., "Detailed Kinetic Modeling of Low-Temperature Heat Release for PRF Fuels in an HCCI Engine," SAE Technical Paper 2009-01-1806, 2009, doi: 10.4271/2009-01-1806.
23. Mittal, G., and Sung, C., "A Rapid Compression Machine for Chemical Kinetics Studies at Elevated Pressures and Temperatures," Combustion Science and Technology, 179, pp. 497-530, 2007.
24. Fieweger, K., Blumenthal, R., and Adomeit, G., "Shock-Tube Investigations on The Self-Ignition of Hydrocarbon-Air Mixtures at High Pressures," Proc. of 25th Int. Symp. on Combustion, pp. 1579-1585, 1994.
25. Minetti, R., Carlier, M., Ribaucour, M., Therssen, E., and Sochet, L.R., "Comparison of oxidation and autoignition of the two primary reference fuels by rapid compression," Symp. (Int.) on Combustion, Vol. 26, Issue 1, pp. 747-753, 1996.
26. Ciezki, H.K., and Adomeit, G., "Shock-Tube Investigation of Self-Ignition of n -Heptane-Air Mixtures Under Engine Relevant Conditions," Combustion and Flame, 93, pp. 421-433, 1993.
27. Minetti, R., Carlier, M., Ribaucour, M., Therssen, E., and Sochet, L.R., "A rapid compression machine investigation of oxidation and auto-ignition of n-Heptane: Measurements and modeling," Combustion and Flame, Vol. 102, Issue 3, pp. 298-309, 1995.
28. Curran, H.J., Gaffuri, P., Pitz, W.J., and Westbrook, C.K., "A Comprehensive Modeling Study of n -Heptane Oxidation," Combustion and Flame, 114, pp. 149-177, 1998.
29. Dec, J., and Yang, Y., "Boosted HCCI for High Power without Engine Knock and with Ultra-Low NOx Emissions-using Conventional Gasoline," SAE Int. J. Engines 3 (1): 750-767, 2010, doi: 10.4271/2010-01-1086.
30. Dec, J.E., Sandia National Laboratories, Personal communication, 2010.
31. Hessel, R., Foster, D., Aceves, S., Davisson, M., et al., "Modeling Iso-octane HCCI Using CFD with Multi-Zone Detailed Chemistry; Comparison to Detailed Speciation Data Over a Range of Lean Equivalence Ratios," SAE Technical Paper 2008-01-0047, 2008, doi: 10.4271/2008-01-0047.
32. Sjöberg, M., and Dec, J., "An Investigation of the Relationship Between Measured Intake Temperature, BDC Temperature, and Combustion Phasing for Premixed and DI HCCI Engines," SAE Technical Paper 2004-01-1900, 2004, doi: 10.4271/2004-01-1900.
33. Sjöberg, M., and Dec, J., "EGR and Intake Boost for Managing HCCI Low-Temperature Heat Release over Wide Ranges of Engine Speed," SAE Technical Paper 2007-01-0051, 2007, doi: 10.4271/2007-01-0051.
34. Sjöberg, M., Dec, J., Babajimopoulos, A., and Assanis, D., "Comparing Enhanced Natural Thermal Stratification Against Retarded Combustion Phasing for Smoothing of HCCI Heat-Release Rates," SAE Technical Paper 2004-01-2994, 2004, doi: 10.4271/2004-01-2994.
35. Sjöberg, M., Dec, J., and Hwang, W., "Thermodynamic and Chemical Effects of EGR and Its Constituents on HCCI Autoignition," SAE Technical Paper 2007-01-0207, 2007, doi: 10.4271/2007-01-0207.
36. Silke, E., Pitz, W., Westbrook, C., Sjöberg, M., et al., "Understanding the Chemical Effects of Increased Boost Pressure under HCCI Conditions," SAE Int. J. Fuels Lubr. 1 (1): 12-25, 2009, doi: 10.4271/2008-01-0019.
37. Sjöberg, M., and Dec, J.E., "Comparing Late-cycle Autoignition Stability for Single- and Two-Stage Ignition Fuels in HCCI Engines," Proceedings of the Combustion Institute, Vol. 31, pp. 2895-2902, 2007.
38. Sjoberg, M., and Dec, J., "Ethanol Autoignition Characteristics and HCCI Performance for Wide Ranges of Engine Speed, Loa and Boost," SAE Int. J. Engines 3 (1): 84-106, 2010, doi: 10.4271/2010-01-0338