Modeling of spray vaporization and air-fuel mixing in gasoline direct-injection engines

SAE Technical Papers

Volumn , Issue , 2000, Pages

  Zeng, Yangbing ^a   Lee, Chia Fon ^a  

^a UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIR ENGINES; DISTILLATION; DROP BREAKUP; GASOLINE; MIXING; MIXTURES; VAPORIZATION;

DISTILLATION CURVES; GASOLINE DIRECT INJECTION ENGINE(GDI); GASOLINE DIRECT INJECTION ENGINES; HIGH-PRESSURE ENVIRONMENT; INTERNAL CIRCULATIONS; MULTICOMPONENT VAPORIZATION; NUMERICAL INVESTIGATIONS; VAPORIZATION BEHAVIOR;

DIRECT INJECTION;

EID: 85072465070     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2000-01-0537     Document Type: Conference Paper

References (41)

1. Tagagi, Y., Itoh, T., Muranaka, S., Lyama, A., Iwakiri, Y., Urushihara, T., Naitoh K., (1998). Simultaneous Attainment of Low Fuel Consumption, High Power Output and Low Exhaust Emissions in Direct Injection S.I. Engines. SAE Paper 980149.
2. Iwamoto, Y., Noma, K., Nakayama, O., Yamauchi, T., and Ando H., (1997). Development of Gasoline Direct Injection Engine. SAE Paper 970541.
3. Tabaczynski, R. J., (1999). Potential Benefits of Gasoline Direct-Injected Engines. The First Joint Meeting of the United States Sections, the Combustion Institute, Washington DC.
4. Mitchell, E., and Alperstein, M., (1973). Texaco Controlled-Combustion System- Multifuel, Efficient, Clean and Practical. Combustion Science and Technology, 8, pp. 39.
5. Simko, A., Choma, M. A., and Repko, L. L., (1972). Exhaust Emission Control by the Ford Programmed Combustion Process-PROCO. SAE Paper 720052.
6. Lancaster, D. R., (1980). Diagnostic Investigation of HC Emissions from a Direct-Injection Stratified-Charge Engine with Early Injection. GM Research Report GMR-3344. Also presented at the Institution of Mechanical Engineers, London, England.
7. Leighton, S. R., Ahern, S. R., Southern, M. P., and Cebis, M. J., (1993). The Orbital Combustion Process for Future Small Two-Stroke Engines. IFP International Seminar, Rucil-Malmaison, France.
8. Lee, C. F., and Bracco, F. V., (1995). Comparisons of Computed and Measured Hollow-Cone Sprays in an Engine. SAE Paper 960284.
9. Bardsley, M. E. A., Felton, P. G., and Bracco, F. V., (1989). 2-D Visualization of a Hollow-Cone Spray in a Cup-in-Head, Ported, I.C. Engine. SAE Paper 890316.
10. Anderson, R. W., Yang, J., Brehob, D. D., Vallance, J. K., and Whiteeaker, R. M., (1996) Understanding the Thermodynamics of Direct Injection Spark Ignition (DISI) Combustion Systems: An Analytical and Experimental Investigation. SAE Paper 962018.
11. Kume, T., Iwamoto, Y., Lido, K., Murakami, M., Akishino, K., and Ando, H., (1996). Combustion Control Technologies for Direct Injection SI Engine. SAE Paper 960600.
12. Fan, L., and Reitz, R. D., (1997). Modeling Fuel Preparation and Stratified Combustion in a Gasoline Direct Injection Engine. SAE Paper 990176.
13. Han, Z., Fan, L., and Reitz, R. D., (1997). Multidimensional Modeling of Spray Atomization and Air-Fuel Mixing in a Direct-Injection Spark-Ignition Engine. SAE Paper 970884.
14. Han, Z., and Reitz, R. D., Yang, J., and Anderson, R. W., (1997). Effects of Injection Timing on Air-Fuel Mixing in a Direct-Injection Spark-Ignition Engine. SAE Paper 970625.
15. Naitoh, K., and Takagi, Y., (1998). Numerical Optimization of the Fuel Mixing Process in a Direct-Injection Gasoline Engine. SAE Paper 981140.
16. Joh, M., and Huh, K. Y., (1999). Numerical Predication of Stratified Charge Distribution in a Gasoline Direct Injection Engine. SAE Paper 990178.
17. Arcoumanis, C., Gavaises, M., Argueyrolles, B., and Galzin, F., (1999). Modeling of Pressure-Swirl Atomizers for GDI Engines. SAE Paper 990502
18. Bai, C., and Gosman, A. D., "Mathematical Modeling of Wall Films Formed by Impinging Sprays," Society of Automotive Engineers, Paper 960626, 1996.
19. Lippert A. M., and Reitz R. D., (1997). Modeling of Multicomponent Fuels Using Continuous Distributions with Application to Droplet Evaporation and Sprays. SAE Paper 972282.
20. Kelly-Zion, P. L., Styron J. P., Lee C. F., Lucht R. P., Peters J. E., and White R. A., (1998). Multicomponent Liquid and Vapor Fuel Measurements in the Cylinder of a Port injected Spark Ignition Engine. Accepted for publication in 27th Combustion Symposium.
21. Amsden, A., (1997). KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves. Los Alamos National Laboratory Report LA-13313-MS.
22. Amsden, A., (1999). KIVA-3V, Release2, Improvements to KIVA-3V. Los Alamos National Laboratory Report LA-13608-MS.
23. O'Rourke, P. J., and Amsden, A. A., (1996). A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines. SAE Paper 961961.
24. Ayoub, N. S., and Reitz, R. D., (1995). Multidimensional Computation of Multicomponent Spray Vaporization and Combustion. SAE Paper 950285.
25. Abraham, J., and Magi, V., (1998). A Model for Multicomponent Droplet Vaporization in Sprays. SAE Paper 980511.
26. Zeng, Y., and Lee, C. F., (1999). Modeling of Multicomponent Fuel Spray and Film Evaporations in I. C. Engines. 2nd Asia-Pacific Conference on Combustion, Tainan, Taiwan, ROC.
27. Zeng, Y., and Lee, C. F., (1999). A multicomponent droplet preferential vaporization model for spray computations. The First Joint Meeting of the United States Sections, The Combustion Institute, Washington DC.
28. Zeng, Y., and Lee, C. F., (1999). A Model for Multicomponent Spray Vaporization in a High Pressure and High Temperature Environment. Internal Combustion Engine Division of ASME 1999 Fall Engine Technology Conference, Ann Arbor, MI.
29. Zeng, Y., and Lee, C. F., (1999). A Multicomponent-Fuel Film-Vaporization Model for Multidimensional Computations. Accepted for publication in Journal of Propulsion and Power.
30. O'Rourke, P. J., and Amsden, A. A., (1987). The TAB Method for Numerical Calculation of Spray Droplet Breakup. SAE Paper 872089.
31. Han, Z., Parrish, S., Farrel, P. V., and Reitz, R. D., (1997). Modeling Atomization Process of Pressure-Swirl Hollow-Cone Fuel Sprays. Atomization and Sprays, 7, pp. 663.
32. Rensizbulut, M., and Bussmann, M., (1993). Multicomponent Droplet Evaporation at Intermediate Reynolds Numbers. International Journal of Heat and Mass Transfer, 36, pp. 2827.
33. Jin, D., and Borman, G. L., (1985). A Model for Multicomponent Droplet Vaporization at High Ambient Pressures. SAE Paper 850264.
34. Law, C. K., (1982). Recent Advance in Droplet Vaporization and Combustion, Progress in Energy and Combustion Science, 8, pp. 171-201.
35. Law, C. K., (1978). Internal Boiling and Superheating in Vaporizing Multicomponent Droplets. AIChE Journal, 24, pp. 626.
36. Megaridis, C. M., and Sirignano, W. A., (1990). Numerical Modeling of a Vaporizing Multicomponent Droplet. 23 rd Symposium (International) on Combustion, pp. 1413.
37. Abramzon, B., and Sirignano, W. A., (1989). Droplet Vaporization Model for Spray Combustion Calculations, International Journal of Heat and Mass Transfer, 32, pp. 1605.
38. Parrish S. E., and Farrell P. V., (1997). Transient Spray Characteristics of a Direct-Injection Spark-Ignited Fuel Injector. SAE Paper 970629.
39. Kelly-Zion, P. L., Styron, J. P., Lee, C. F., Lucht, R. P., Peters, J. E., and White, R. A., (1997). In-Cylinder Measurements of Liquid Fuel during the Intake Stroke of a Port-Injected Spark Ignition Engine. SAE Paper 972945.
40. Whelan, D. E., Kelly-Zion P. L., Lee C. F., Peters J. E., and White R. A., (1997). Back-Flow Atomization in the Intake Port of Spark Ignition Engines. SAE Paper 972988.
41. Kelly-Zion, P. L., Styron, J. P., Lee, C. F., Lucht, R. P., Peters, J. E., and White, R. A., (1998). Atomization Quality in the Cylinder of a Port Injected Spark Ignition Engine. Accepted for publication in Atomization and Sprays