Experimental heat release rate analysis in both chambers of an indirect injection turbocharged diesel engine at various load and speed conditions

SAE Technical Papers

Volumn , Issue , 2005, Pages

  Rakopoulos, C D ^a   Hountalas, D T ^a   Rakopoulos, D C ^a   Giakoumis, E G ^a  

^a NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION CHAMBERS; DATA ACQUISITION; DATA HANDLING; EQUATIONS OF STATE; FLOW OF GASES; SPEED;

COMBUSTION MECHANISM; HEAT RELEASE ANALYSIS; HEAT RELEASE RATE (HRR); HEAT RELEASE RATE ANALYSIS; HIGH SPEED DATA ACQUISITION; INDIRECT INJECTION DIESEL ENGINE; STEADY-STATE CONDITION; TURBOCHARGED DIESEL ENGINE;

DIESEL ENGINES;

EID: 85072455694     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2005-01-0926     Document Type: Conference Paper

References (49)

1. Benson, R.S., and Whitehouse, N.D., Internal Combustion Engines, Pergamon Press, Oxford, 1979.
2. Ferguson, C.R., Internal Combustion Engines, Wiley, New York, 1986.
3. Heywood, J.B., Internal Combustion Engine Fundamentals, McGraw-Hill, New York, 1988.
4. Watson, N., and Kamel, M., 'Thermodynamic efficiency evaluation of an indirect injection diesel engine' SAE Paper No 790039, 1979.
5. Obert, E.F., Internal Combustion Engines and Air Pollution, Intext Educational Publ., New York, 1973.
6. Watson, N., and Janota, M.S., Turbocharging the Internal Combustion Engine, MacMillan, London, 1982.
7. Rakopoulos, C.D., and Hountalas, D.T., 'Development of a new 3-D multi-zone combustion model for indirect injection diesel engines with a swirl type prechamber' SAE Paper No 2000-01-0587, SAE Transactions, Journal of Engines, Vol. 109, pp. 718-733, 2000.
8. Kouremenos, D.A., Rakopoulos, C.D., and Hountalas, D.T., 'Thermodynamic analysis of indirect injection diesel engines by two-zone modeling of combustion' ASME Transactions, Journal of Engineering for GasTurbines and Power, Vol. 112, pp. 138-149, 1990. (Pubitemid 20645643)
9. Rakopoulos, C.D., and Giakoumis, E.G., 'Development of cumulative and availability rate balances in a multi-cylinder turbocharged multi-cylinder indirect injection diesel engine' Energy Conversion & Management, Vol. 38, pp. 347-369, 1997. (Pubitemid 127439515)
10. Rakopoulos, C.D., and Hountalas, D.T., 'Development and validation of a 3-D multi-zone combustion model for the prediction of DI diesel engines performance and pollutants emissions' SAE Paper No 981021, SAE Transactions, Journal of Engines, Vol. 107, pp. 1413-1429, 1998.
11. Rakopoulos, C.D., Taklis, G.N., and Tzanos, E.I., 'Analysis of combustion chamber insulation effects on the performance and exhaust emissions of a DI diesel engine using a multi-zone model' Heat Recovery Systems & CHP, Vol. 15, pp. 691-706, 1995.
12. Rakopoulos, C.D., Rakopoulos, D.C., and Kyritsis, D.C., 'Development and validation of a comprehensive two-zone model for combustion and emissions formation in a DI diesel engine' Energy Research, Vol. 27, pp. 1221-1249, 2003. (Pubitemid 37400472)
13. Ciesla, C., Keribar, R., and Morel, T., 'Engine/powertrain/vehicle modeling tool applicable to all stages of the design process' SAE Paper No 2000-01-0934, 2000.
14. Meintjes, K., and Alkidas, A.C., 'An experimental and computational investigation of the flow in diesel prechambers' SAE Paper No 820275, 1982.
15. Hiroyasu, H., Yoshimatsu, A., and Arai, M., 'Mathematical model for predicting the rate of heat release and exhaust emissions in IDI diesel engines' Conference on 'Diesel Engines for Passenger Cars and Light Duty Vehicles' Institution of Mechanical Engineers, Paper No C102/82, pp. 207-213, 1982. (Pubitemid 13483536)
16. Mansouri, S.H., Heywood, J.B., and Radhakrishnar, K., 'Divided-chamber diesel engine, Part I: A cycle-simulation which predicts performance and emissions' SAE Paper No 820273, 1982.
17. Liu, J.P., Ge, X.K., and Peng, L.X., 'A study on the accurate calculation method of heat-release rate in swirl chamber indirect injection diesel engine' Proceedings of the Institution of Mechanical Engineers, Vol. 203, pp. 267-275, 1989.
18. Giannattasio, M., and Micheli, D., 'Phenomenological modeling of IDI diesel engines' SAE Paper No 971592, 1997.
19. Alkidas, A.C., and Cole, R.M., 'Heat losses from a divided-chamber diesel engine' Proceedings of the Institution of Mechanical Engineers, Vol. 197C, pp. 151-158, 1983. (Pubitemid 14472548)
20. Fortnagel, M., 'The Mercedes-Benz diesel engine range for passenger cars and light duty trucks as viewed from emissions aspects' Conference on "Automotive power systems-Environment and conservation" 1990, Institution of Mechanical Engineers, Publication 1990-9, MEP, London.
21. Longbao, Z., Shouxin, S., Zhiyu, H., Bin, X., Yuyin, C., and Jiaolin, D., 'Evaluation and study on the heat release rate of swirl chamber diesel engine' SAE Paper No 911786, 1991.
22. Rakopoulos, C.D., and Hountalas, D.T., 'Net and gross heat release rate calculations in a DI diesel engine using various heat transfer models' Proceedings, ASME-WA Meeting, Chicago IL, AES, Vol. 33, pp. 251-262, 1994.
23. Homsy, S.C., and Atreya, A., 'An experimental heat release rate analysis of a diesel engine operating under steady state conditions' SAE Paper No 970889, 1997.
24. Ladommatos, N., Abdelhalim, S.M., Zhao, H., and Hu, Z., 'Effects of EGR on heat release in diesel combustion' SAE Paper No 980184, 1998.
25. Assanis, D.N., Filipi, Z.S., Fiveland, S.B., and Syrimis, M., 'A methodology for cycle-by-cycle transient heat release analysis in a turbocharged direct injection diesel engine' SAE Paper No 2000-01-1185, 2000.
26. Anisits, F., and Zapf, H., 'Pressure development evaluation methods and electronic calculation of combustion process in diesel engines with divided combustion chambers' Motortechnische Zeitschrift, Vol. 32, pp. 447-451, 1971 (in German).
27. Bowden, C.M., Samaga, B.S., and Lyn, W.T., 'Rate of heat release in high-speed indirect injection diesel engines' Proceedings of the Institution of Mechanical Engineers, Vol. 184 (Part 3J), Paper No 12, pp. 122-129, 1969-1970.
28. Kort, R.T., Mansouri, S.H., Heywood, J.B., and Ekchian, A., 'Divided-chamber diesel engine, Part II: Experimental validation of a predictive cycle-Simulation and heat release analysis' SAE Paper No 820274, 1982.
29. Kouremenos, D.A., Rakopoulos, C.D., and Hountalas, D.T., 'Experimental and computational determination of heat release rates of an IDI diesel engine' Conference 'Autotech 91' Birmingham, Nov. 12-15, 1991, Institution of Mechanical Engineers, Paper No C427/28/123, pp. 9-15, 1991.
30. Pinchon, P., and Guillot, B., 'Thermodynamic and flow analysis of an indirect injection diesel combustion chamber by modeling' SAE Paper No 851686, 1985.
31. Kouremenos, D.A., Rakopoulos, C.D., and Andritsakis, E.C., 'Theoretical and experimental investigation of the wave action in the exhaust system of a multi-cylinder turbocharged marine IDI diesel engine' Proceedings, ASME-WA Meeting, New Orleans LA, AES, Vol. 30, pp. 337-354, 1993.
32. Rakopoulos, C.D., and Giakoumis, E.G., 'Availability analysis of a turbocharged diesel engine operating under transient load conditions' Energy-The International Journal, Vol. 29, pp. 1085-1104, 2004. (Pubitemid 38616232)
33. Rakopoulos, C.D., Giakoumis, E.G., Hountalas, D.T., and Rakopoulos, D.C., 'The effect of various dynamic, thermodynamic and design parameters on the performance of a turbocharged diesel engine operating under transient load conditions' SAE Paper No 2004-01-0926, 2004.
34. Rakopoulos, C.D., Giakoumis, E.G., and Hountalas, D.T., 'Experimental and simulation analysis of the transient operation of a turbocharged multi-cylinder IDI diesel engine' Energy Research, Vol. 22, pp. 317-331, 1998. (Pubitemid 128607869)
35. Kowalewicz, A., Combustion Systems of High-Speed Piston I.C. Engines, Elsevier, Amsterdam, 1984.
36. Stone, R., Introduction to Internal Combustion Engines, MacMillan, London, 1992.
37. Rakopoulos, C.D., and Giakoumis, E.G., 'A computer program for simulating the steady-state and transient behaviour of direct-acting engine governors' Advances in Engineering Software, Vol. 30, pp. 281-289, 1999.
38. Bracco, F.V., and O'Rourke, P.J., 'A review of initial comparisons of computed and measured two-dimensional unsteady flame fields' Progress in Energy and Combustion Science, Vol. 7, pp. 103-124, 1981. (Pubitemid 12433776)
39. Krieger, R.B., and Borman, G.L., 'The computation of apparent heat release for internal combustion engines' ASME Paper No 66-WA/DGP-4, 1966.
40. Rakopoulos, C.D., Rakopoulos, D.C., Mavropoulos, G.C., and Giakoumis, E.G., 'Experimental and theoretical study of the short term response temperature transients in the cylinder walls of a diesel engine at various operating conditions' Applied Thermal Engineering, Vol. 24, pp. 679-702, 2004.
41. Annand, W.J.D., 'Heat transfer in the cylinders of reciprocating internal combustion engines' Proceedings of the Institution of Mechanical Engineers, Vol. 177, pp. 973-990, 1963.
42. Kamel, M., and Watson, N., 'Heat transfer in the indirect injection diesel engine' SAE Paper No 790826, 1979.
43. Horlock, J.H., and Winterbone, D.E., The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II, Clarendon Press, Oxford, 1986.
44. Conte, S.D., Elementary Numerical Analysis, McGraw-Hill, New York, 1965.
45. Zinner, K., Supercharging of Internal Combustion Engines, Springer-Verlag, Berlin, 1978.
46. Bryan, H.F., 'Combustion in a precombustion-type diesel engine' SAE Journal, Vol. 54, p. 449, 1946.
47. Nagao, F., and Kakimoto, H., 'Swirl and combustion in divided chamber diesel engines' SAE Transactions, Vol. 70, pp. 680-699, 1962.
48. Pischinger, R., and Cartellieri, W., 'Combustion systems parameters and their effect upon diesel engine exhaust emissions' SAE Paper No 720756, 1972.
49. Khan, I.M., Greeves, G., and Wang, C.H.T., 'Factors affecting smoke and gaseous emissions from direct injection engines and a method of calculation' SAE Paper No 730169, 1973.