Measurement and modeling on wall wetted fuel film profile and mixture preparation in intake port of SI engine

SAE Technical Papers

Volumn , Issue , 1999, Pages

  Senda, Jiro ^a   Ohnishi, Masanori ^a   Takahashi, Tomohiro ^a   Fujimoto, Hajime ^a   Utsunomiya, Atsushi ^b   Wakatabe, Michio ^c  

^a DOSHISHA UNIVERSITY   (Japan)

^b DENSO CORPORATION   (Japan)

^c IHI CORPORATION   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

ATMOSPHERIC PRESSURE; DROP BREAKUP; ENGINES; FUELS; MIXTURES; WETTING;

CONSTANT-VOLUME VESSEL; DROPLET-DROPLET INTERACTIONS; IMPINGEMENT DISTANCES; INJECTION DURATIONS; INTERACTION PROCESS; LASER-INDUCED FLUORESCENCE TECHNIQUE; MIXTURE PREPARATIONS; UNBURNED HYDROCARBONS;

FILM PREPARATION;

EID: 85072439052     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/1999-01-0798     Document Type: Conference Paper

References (33)

1. Amsden, A. A., O'Rourke, P. J., and Butler, T. D., "KIVA-II:A Computer Program for Chemically Reactive Flows with Sprays" Los Alamos National Laboratory report LA-11560-MS, 1989.
2. Felton, P. G., Kyritsis, D. C., and Fulcher, S. K., "LIF Visualization of Liquid Fuel in the Intake Manifold During Cold Start" SAE Paper 952464, 1995.
3. Johnen, T., and Haug, M., "Spray Formation Observation and Fuel Film Development Measurements in the Intake of a Spark Ignition Engine" SAE Paper 950511, 1995.
4. Bourke, M. C., and Evers, L. W., "Fuel Film Dynamics in the Intake Port of a Fuel Injected Engine" SAE Paper 940446, 1994.
5. Evers, L. W., and Kenneth, J. J., "Liquid Film Thickness Measurements by Means of Internally Reflected Light" SAE Paper 950002, 1995.
6. Coste, T. L., and Evers, L. W., "An Optical Sensor for Measuring Fuel Film Dynamics of a Port-Injected Engine" SAE Paper 970869, 1997.
7. Tabata, M., Kataoka, M., Fujimoto, M., and Noh, Y., "In-Cylinder Fuel Distribution, Flow Field, and Combustion Characteristics of a Mixture Injected SI Engine" SAE Paper 950104, 1995.
8. Melton, L. A., "Exciplex-Based Vapor/Liquid Visualization Systems Appropriate for Automotive Gasolines" Applied Spectroscopy Vol. 47, Num. 6, pp. 782-786, 1993.
9. Kim, J. U., Golding, B., Schock, H. J., Keller, P., and Nocera, D. G., "Exciplex Fluorescence Visualization Systems for Pre-Combustion Diagnosis of an Automotive Gasoline Engine" SAE Paper 960826, 1996.
10. Fröba, A. P., Rabenstein, F., Münch, K. -U., and Leipertz, A., "Mixture of Triethylamine (TEA) and Benzene as a New Seeding Material for the Quantitative Two-Dimensional Laser-Induced Exciplex Fluorescence Imaging of Vapor and Liquid Fuel Inside SI Engines" Combustion and Flame 112, pp. 199-209, 1998. (Pubitemid 27525675)
11. Itoh, T., Kakuho, A., Hishhinuma, H., Urushihara, T., Takagi, Y., Horie, K., Asano, M., Ogata, E., and Yamasta, T., "Development of a New Compound Fuel and Fluorescent Tracer Combination for Use with Laser Induced Fluorescence" SAE Paper 952465, 1995.
12. Green, R. M., and Cloutman, L. D., "Planar LIF Observations of Unburned Fuel Escaping the Upper Ring-Land Crevice in an SI Engine" SAE Paper 970823, 1997.
13. Swindal, J. C., Furman, P. A., Lolodice, M. E., Stevens, R. W., Liu, P.C., and Acker, W. P., "Fuel Distillation Effects on the Outgassing from a Simulated Crevice in a SI Engine Measured by Planar Laser-Induced Fluorescence" SAE Paper 970825, 1997.
14. Nagaoka, M., Kawazoe, H., and Nomura, N., "Modeling Fuel Spray Impingement on a Hot Wall for Gasoline Engines" SAE Paper 940525, 1994.
15. Nagaoka, M., Ohsawa, K., Crary, B., Yamada, T., Sugiura, S., and Imatake, N., "Numerical Analysis of Fuel Behavior in a Port-Injection Gasoline Engine" SAE Paper 970878, 1997.
16. Nagaoka, M., Miyagawa, H., Ohsawa, K., and Yamada, T., "Improvement of Fuel Behavior Model for Port-Injection Gasoline Engines -Spray Boundary Conditions and Multi-component fuel Vaporization Model-" COMODIA98, pp. 523-530, 1998.
17. Mundo, C., Sommerfeld, M., and Tropea, C., "Droplet-Wall Collisions: Experimental Studies of the Deformation and Breakup Process" Int. J. Multiphase Flow Vol. 21, No. 2, pp. 151-173. 1995.
18. Naitoh, K., Takagi, Y., Kokita, H., and Kuwahara, K., "Numerical Prediction of Fuel Secondary Atomization Behavior in SI Engine based on the Oval-Parabola Trajectories (OPT) Model" SAE Paper 940526, 1994.
19. Bai, C., and Gosman, A. D., "Mathematical Modeling of Wall Films Formed by Impinging Sprays" SAE Paper 960626, 1996.
20. Ahmadi-Befrui, B., Uchil, N., Gosman, A. D., and Issa, R. I., "Modeling and Simulation of Thin Liquid Films Formed by Spray-Wall Interaction" SAE Paper 960627, 1996.
21. Stanton, D. W., and Rutland, C. J., "Modeling Fuel Film Formation and Wall Interaction in Diesel Engines" SAE Paper 960628, 1996.
22. Stanton, D. W., and Rutland, C. J., "Multi-Dimensional Modeling of Heat and Mass Transfer of Fuel Films Resulting from Impinging Sprays" SAE Paper 980132, 1998.
23. O'Rourke, P. J., and Amsden, A. A., "A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines" SAE Paper 961961, 1996.
24. Amsden, A. A., "KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves" Los Alamos National Laboratory report LA-13313-MS, 1997.
25. Coghe, A., Cossali, G. E., and Marengo, M., "A First Study about Single Drop Impingement on Thin Liquid Film in a Low Laplace Number Range" 11th European Conf. of ILASS-Europe, pp. 285-293, 1995.
26. Marengo, M., "Analisi Dell'impatto di Gocce su Film Liquido Sottile" Ph.D. Thesis at Univ. of Erlangen-Noremberg, 1995.
27. Yarin, A. L., and Weiss, D. A., "Impact of drops on solid surfaces: self-similar capillary waves, and splashing as a new type of kinematic discontinuity" J. Fluid Mech., vol. 283, pp. 141-173, 1995. (Pubitemid 26467852)
28. Senda, J., Kobayashi, M., Iwashita, S., and Fujimoto, H., "Modeling of Diesel Spray Impingement on a Flat Wall" SAE Paper 941894, 1994.
29. Senda, J., Kanda, T., Al-Roub, M. A., Farrell, P. V., Fukami, T., and Fujimoto, H., "Modeling Spray Impingement Considering Fuel Film Formation on the Wall" SAE Paper 970047, 1997.
30. Al-Roub, M. A., "Hydrodynamics and Heat Transfer of Multiple Droplet Impingement" Ph.D. Thesis at Univ. of Wisconsin-Madison, 1995.
31. Al-Roub, M. A., Farrell, P. V., and Senda, J., "Near Wall Interaction in Spray Impingement" SAE Paper 960863, 1996.
32. Senda, J., Dan, T., Takagishi, S., Kanda, T., and Fujimoto, H., "Spray Characteristics of Non-Reacting Diesel Spray by Experiments and Simulations with KIVA-II Code" Proc. of LCLASS-97, Seoul, pp. 149-156, 1997.
33. Adachi, M., McDonell, V. G., Tanaka, D., Senda, J., and Fujimoto, H., "Characterization of Fuel Vapor Concentration Inside a Flash Boiling Spray" SAE Paper 970871, 1997.