A lumped/1-D combined approach for modeling wall-flow diesel particulate filters - Applicable to integrated engine/aftertreatment simulations

SAE Technical Papers

Volumn , Issue , 2007, Pages

  Tang, Weiyong ^a   Wahiduzzaman, Syed ^a   Leonard, Andy ^a  

^a Gamma Technologies Inc   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIR FILTERS; BANDPASS FILTERS; ENGINES; FUEL FILTERS; POWERTRAINS; SILICON CARBIDE;

CONTROL APPLICATIONS; DEEP BED FILTRATION; DIESEL PARTICULATE FILTERS; EXHAUST AFTERTREATMENT; LUMPED PARAMETER MODELING; PARTICULATE FILTERS; STAND-ALONE DEVICES; WALL FLOW DIESEL PARTICULATE FILTERS;

WALL FLOW;

EID: 85072424898     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2007-01-3971     Document Type: Conference Paper

References (34)

1. Bissett E., "Mathematical Modeling of the Thermal Regeneration of a Wall-Flow Monolith Diesel Particulate Filter" Chem. Eng. Sci., 1984, 39, 1233.
2. Bissett, E., Shadman, F., "Thermal Regeneration of Diesel Particulate Monolithic Filters" AlChE J. 1985, 31, 753.
3. Ciambelli P., Palma V., Russo P., and Vaccaro S., "Soot Catalytic Combustion in the Presence of NO" Combust. Science and Technology, 2000, 153, 325.
4. England S. B., Rutland C. J., Foster D. E., and He Y., "Investigation of Effect of DPF Loading and Passive Regeneration on Engine Performance and Emissions Using an Integrated System Simulation" SAE No. 2006-01-0263, Detroit, MI, 2006.
5. Haralampous O. A., Koltsakis G. C., Samaras Z. C., Vogt C. D., Ohara E., Watanabe Y., and Mizutani T., "Reaction and Diffusion Phenomena in Catalyzed Diesel Particulate Filters" SAE 2004-01-0696, Detroit, MI, 2004.
6. Haralampous O. A., and Koltsakis G. C., "Back-Diffusion Modeling of NO2 in Catalyzed Particulate Filters" Ind. Eng. Chem. Res., 2004, 43, 875.
7. Huynh C. T., Johnson J. H., Yang S. L., Bagley S. T., and Warner J. R., "A One-Dimensional Computational Model for Studying the Filtration and Regeneration Characteristics of a Catalyzed Wall-Flow Diesel Particulate Filter" SAE No. 2003-01-0841, Detroit, MI, 2003.
8. Johnson T. S., "Diesel Emission Control in Review" SAE No. 2006-01-0030, Detroit, MI, 2006.
9. 2-Assisted Regeneration of Diesel Particulate Filters: A Modeling Study" Ind. Eng. Chem. Res. 2002, 41, 2115-2123. (Pubitemid 34438781)
10. Kapparos D. J., Brahma I., Strzelec A., Rutland C. J., Foster D. E., and He Y., "Integration of Diesel Engine, Exhaust System, Engine Emission and Aftertreatment Device Models" SAE No. 2005-01-0947, Detroit, MI, 2005.
11. Kladopoulou E. A., Yang, S. L., Johnson J. H., Parker, G. G., and Konstandopoulos A. G., "A Study Describing the Performance of Diesel Particulate Filters During Loading and Regeneration-A Lumped Parameter Model for Control Applications" SAE No. 2003-01-0842, Detroit, MI, 2003.
12. Koltsakis G. C., Haralampous O. A., Margaritis N., Samaras Z. C., Vogt C. D., Ohara E., Watanabe Y., and Mizutani T., "3-Dimensional Modeling of the Regeneration in SiC Particulate Filters" SAE 2005-01-0953, Detroit, MI, 2005.
13. Koltsakis G. C., and Stamatelos A. M., "Modeling Catalytic Regeneration of Wall-Flow Particulate Filters" Ind. Eng. Chem. Res., 1996, 35, 2-13. (Pubitemid 126464915)
14. Koltsakis G. C., and Stamatelos A. M., "Modes of Catalytic Regeneration in Diesel Particulate Filters" Ind. Eng. Chem. Res., 1997, 36, 4155-4165.
15. Konstandopoulos A. G., and Johnson J. H., "Wall-Flow Diesel Particulate Filter-Their Pressure Drop and Collection Efficiency" SAE Transactions, Journal of Engines, Paper NO. 890405, 1989, 625-647.
16. Konstandopoulos A. G., and Kostoglou M., "Reciprocating Flow Regeneration of Soot Filters" Combut. Flame, 2000, 121, 288-300.
17. Konstandopoulos A. G., Kostoglou M., Skaperdas E., Papaioannou E., Zarvalis D., and Kladopoulou E., "Fundamental Studies of Diesel Particulate Filters: Transient Loading, Regeneration and Aging" SAE No. 2000-01-1016, Detroit, MI, 2000.
18. Konstandopoulos A. G., Kostoglou, M., Vlachos N., and Kladopoulou E., "Progress in Diesel Particulate Filter Simulation" SAE No. 2005-01-0946, Detroit, MI, 2005.
19. Konstandopoulos A. G., Skaperdas E., and Masoudi M., " Microstructural Properties of Soot Deposits in Diesel Particulate Traps" SAE No. 2002-01-1015, Detroit, MI, 2002.
20. Lee K. W., and Gleseke J., "Collection of Aerosol Particles by Packed Beds" Env. Sci. Tech., 1979, 13, 466-470. (Pubitemid 9137076)
21. Mohammed H., Triana A. P., Yang S. L., and Johnson J. H., "An Advanced 1D 2-Layer Catalyzed Diesel Particulate Filter Model to Simulate" SAE No. 2006-01-0467, Detroit, MI, 2006.
22. Morel T., Keribar R., Silvestri J., and Wahiduzzaman S., "Integrated Engine/Vehicle Simulation and Control" SAE NO. 1999-01-0907, Detroit, MI, 1999.
23. Peters B. J., Wanker R. J., Munzer A., and Wurzenberger J. C., "Integrated 1D to 3D Simulation Workflow of Exhaust Aftertreatment Devices" SAE No. 2004-01-1132, Detroit, MI, 2004.
24. Pontikakis G., Stamatelos A., Bakasis K., Aravas N., "3-D Catalytic Regeneration and Stress Modeling of Diesel Particulate Filters by ABAQUS FEM Software" SAE 2002-01-1017, Detroit, MI, 2002.
25. Press W. H., Teukolsky S. A., Vetterling W. T., and Flannery B. P., "Numerical Recipes" 2rd Ed., Cambridge University Press, 1992.
26. Shende A. S., Johnson J. H., Yang S. L., Bagley S. T., and Thalagavara A. M., "The Filtration and Particulate Matter Oxidation Characteristics of a Catalyzed Wall-Flow Diesel Particulate Filter: Experimental and 1-D 2-Layer Model Results" SAE No. 2005-01-0949, Detroit, MI, 2005.
27. Singh P., Thalagavara A. M., Naber J. D., Johnson J. H., and Bagley S. T., "An Experimental Study of Active Regeneration of an Advanced Catalyzed Particulate Filter by Diesel Fuel Injection Upstream of an Oxidation Catalyst" SAE No. 2006-01-0879, Detroit, MI, 2006.
28. Stanmore B. R., Brilhac, J. F., and Gilot P., "The Oxdiation of Soot: a Review of Experiments, Mechanisms and Models" Carbon, 2001, 39, 2247.
29. Tan, J. C., Opris, C. N., Baumgard, K. J., and Johnson, J. H., "A Study of the Regeneration Process in Diesel Particulate Traps Using a Copper Fuel Additive" SAE paper 960136; Warrendale, PA, 1996.
30. Votsmeier M., Gieshoff J., Kögel M., Pfeifer M., Knoth J. F., Drochner A., and Vogel H., "Wall-Flow Filters with Wall-Integrated Oxidation Catalyst A Simulation Study" Appl. Cat. B: Environmental, 2007, 70, 233.
31. Young D. M., Warren C. J., Gadkaree K. P., and Johannesen L., "Silicon Carbide for Diesel Particulate Filter Applications: Material Development and Thermal Design" SAE No. 2002-01-0324, Detroit, MI, 2002.
32. Zhang Z., Yang, S. L., And, Johnson J. H., "Modeling and Numerical Simulation of Diesel Particulate Trap Performance during Loading and Regeneration" SAE No. 2002-01-1019, Detroit, MI, 2002.
33. Wurzenberger J. C., Munzer A., Peters B., and Wanker R., "1D/3D Simulation Workflow-Optimization of Exhaust Gas Aftertreatment Devices". ATZ-Worldwide, 2004, 106, 27-44.
34. Gordon S., and McBride B. J., "Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications" NASA Reference Publication 1311, 1994.