Multi-zone di diesel spray combustion model and its application for matching the injector design with piston bowl shape

SAE Technical Papers

Volumn , Issue , 2007, Pages

  Kuleshov, A S ^a  

^a BAUMAN MOSCOW STATE TECHNICAL UNIVERSITY   (Russian Federation)

Author keywords

[No Author keywords available]

Indexed keywords

BODIES OF REVOLUTION; DIESEL ENGINES; ENGINE PISTONS; FUELS; IGNITION; PISTONS; SPRAY NOZZLES; WALL FLOW;

CHARACTERISTIC ZONES; COMPUTATIONAL RESEARCHES; EVAPORATION CONDITIONS; MULTIPLE INJECTIONS; SPRAY TIP PENETRATION; SPRAY WALL IMPINGEMENT; TRANSIENT EVOLUTION; TURBOCHARGED ENGINE;

DIRECT INJECTION;

EID: 85072417152     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2007-01-1908     Document Type: Conference Paper

References (42)

1. Jung Dohoy, and Assanis Dennis N.,: "Multi-zone DI Diesel Spray Combustion Model for Cycle Simulation Studies of Engine Performance and Emissions" SAE Paper No 2001-01-1246, 2001.
2. Kuleshov A.S.,: "Model for predicting air-fuel mixing, combustion and emissions in DI diesel engines over whole operating range" SAE Paper No 2005-01-2119, 2005.
3. Kuleshov A.S.,: "Use of Multi-Zone DI Diesel Spray Combustion Model for Simulation and Optimization of Performance and Emissions of Engines with Multiple Injection" SAE Paper No 2006-01-1385, 2006.
4. Zeldovich Ya.B., Raizer Yu.P.,: "Physics of shock waves and high-temperature hydrodynamic phenomena" Moscow: Nauka, 686 p., 1966. (In Russian).
5. Zvonov V.A.,: "Internal combustion engines toxicity" Moscow: Mashinostroenie, 200 p., 1973. (In Russian).
6. Tchesnokov S.A., Simulation of High-temperature reactions of combustion.-Tula: TGU, 2002.-163 p. (In Russian).
7. Tao F., Golovitchev V.I., Chomiak J.,. Application of Complex Chemis-try to Investigate the Combustion Zone Structure of DI Diesel Sprays under En-gine-Like Conditions.-Gothenburg: Chalmers University of Technology, 2001.-9 p.
8. Razleytsev N.F.,: "Combustion simulation and optimization in diesels" Kharkov: Vischa shkola, 169 p., 1980. (In Russian).
9. Chui, W.S., Shahed, S.M., and W.T. Lyn,: "A Transient Spray Mixing Model for Diesel Combustion" SAE Paper No 760128, 1976.
10. Bi Xiaoping, Yang Minggao, Han Shu, and Ma Zhixiong,: "A multi-Zone Model for Diesel Spray Combustion" SAE Paper No 1999-01-0916, 1999.
11. Hiroyasu Hiroyuki, Kadota Toshikazu, and Arai Masataka,: "Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions," paper 214-12, Bull. JSME, vol. 26, No. 214, pp. 576-583, 1983. (Pubitemid 13559276)
12. Rakopoulos C.D., Hountalas D.T.,: "Development and validation of a 3-D Multi-Zone Combustion Model for the Prediction of DI Diesel Engines Performance and Pollutants Emissions" SAE Paper No 981021, 1998.
13. Kukushkin V.L., Romanov S.A., Sviridov Yu.B.,: "Measuring holographic system and diesel flame investigating procedure" Dvigatelestroenie, No. 9, pp. 24-26, 1983. (In Russian).
14. Kukushkin V.L., Romanov S.A., Sviridov Yu.B.,: "Experimental research into the structure of a dispersed diesel fuel unsteady spray with holography" Dvigatelestroenie, No. 2, pp. 3-7, 1989. (In Russian).
15. Baev V.K., Bazhaykin A.N., Bichenkov E.I., et. al.,: "X-ray impulse method of studying fuel flame inner structure" Appl. mathematics and theor. physics, No. 1, pp. 106-111, 1980. (In Russian).
16. Astakhov I.V., Golubkov L.N., Trusov V.I., et. al.,: "Fuel systems and economical operation of diesels" Moscow, 288 p., 1990. (In Russian).
17. Kamimoto, T., Kobayashi, H., and Matsuoka, S.,: "A Big Size Rapid Compression Machine for Fundamental Studies of Diesel Combustion" SAE Paper 811004, SAE Trans., vol. 90, 1981.
18. Reitz, R.D., and Bracco, F.V.,: "On the dependence of Spray Angle and Other Spray Parameters on Nozzle Design and Operating Conditions" SAE paper 790494, 1979.
19. Bracco, F.V.,: "Modeling of Engine Sprays" SAE Paper No 850394, 1985.
20. Kuo, T.W., and Bracco, F.V.,: "Computations of Drop Sizes in Pulsating Sprays and of Liquid-Core Length in Vaporizing Sprays" SAE Paper No 820133, SAE Trans., vol. 91, 1982.
21. Kaluzhin S.A., Romanov S.A., Sviridov Yu.B.,: "Experimental investigation into velocities of liquid and gaseous phases in diesel fuel flame" Dvigatelestroenie, No. 7, pp. 5-8, 1980. (In Russian).
22. Lyn, W.T.,: "Study of Burning Rate and Nature of Combustion in Diesel Engines" in Proceedings of Ninth International Symposium on Combustion, pp. 1069-1082, The Combustion Institute, 1962.
23. Heywood, J.B.,: Internal Combustion Engine Fundamentals, McGraw-Hill, New York, 1988.
24. Dragunov G.D., Egorov V.V.,: "Some peculiarities of fuel moving along the combustion chamber surface" Izv. Vuzov, Mashinostroenie, No. 1, pp. 119-122, 1977. (In Russian).
25. Egorov V.V.,: "Investigation into peculiarities of fuel evaporation and working cycle in boosting the tractor diesel with the CNIDI combustion chamber" Ph. D. Thesis, Leningrad, 1978. (In Russian).
26. Ivanchenko N.N., Semenov B.N., Sokolov V.S.,: "Working process in diesels with piston bowl" Leningrad, Mashinostroenie, 228 p., 1972. (In Russian).
27. 2 with limitations on maximum combustion pressure" Ph. D. Thesis, Leningrad, 1978. (In Russian).
28. Semenov B.N.,: "Theoretical and experimental fundamentals of applying fuels with various physical and chemical properties in high-speed diesels" Dr. Snc. Thesis, Leningrad, 1978. (In Russian).
29. Sokolov S.S., Demidova N.I., Safonov V.K.,: "Increase of diesel reliability by optimization of combustion chamber" Energomashinostroenie, No. 2, pp. 12-14, 1973. (In Russian).
30. Semenov B.N., Pavlov E.P.,: "Investigation and development of volume and film fuel-air mixing in diesels" Energomashinostroenie, No. 1, pp. 7-10, 1978. (In Russian).
31. Balles, E.,: "Fuel-Air Mixing and Diesel Combustion in a rapid Compression Machine" Ph.D. Thesis, Department of Mechanical Engineering, MIT, June 1987.
32. Gavrilov V.V.,: "Methods increasing quality of fuel-air mixing and combustion in a marine diesel based on mathematical and physical simulation of local intracylinder processes" Dr. Snc. Thesis, Saint Petersburg, StPbSMTU, 2004. (In Russian).
33. Razleytsev N.F., Sukachev I.I.,: "Simulation of motion and fuel distribution in the diesel spray" Internal Combustion Engines, No. 49, pp. 72-80, 1989. (In Russian).
34. Lyshevsky A.S.,: "Fuel atomization in marine diesels" Leningrad, 248 p., 1971. (In Russian).
35. Kuo, T.W., and Bracco, F.V.,: "On the Scaling of Transient Laminar, Turbulent and Spray Jets" SAE Paper No. 820038, 1982.
36. Hiroyasu, H., Kadota, T., and Arai, M.,: "Supplementary Comments: Fuel Spray Characterization in Diesel Engines" Combustion Modeling in Reciprocating Engines, Ed. By Mattavi, J.N., and Amann, C.A., pp. 369-408, Plenum Press, N.Y., 1980.
37. Sviridov Yu.B., Malyavsky L.V., Vihert M.M.,: "Fuel and fuel supply in automotive diesels" Leningrad, 224 p., 1972. (In Russian).
38. Kwon Soon-Ik, Arai Masataka, Hiroyasu Hiroyuki,: "Ignition Delay of a Diesel Spray Injected Into a Residual Gas Mixture" SAE Paper No. 911841, 1991.
39. Bakenhus Marco, and Reitz Rolf D.,: "Two-Color Combustion Visualization of Single and Split Injections in a Single-Cylinder Heavy-Duty D.I. Diesel Engine Using an Endoscope-Based Imaging System" SAE Paper No. 1999-01-1112, 1999.
40. Schneider W., Stockli M., Lutz T., Eberle M.,. Hochdruckeinspritzung und Abgasrezirkulation im kleinen, schnellaufenden Dieselmotor mit direkter Einspritzung. MTZ. N 11, 1993. S.588-599.
41. http://www.diesel-rk.bmstu.ru
42. Nakagawa H., Oda Y., Kato S., Nakashima M., and Tateishi M.,: "Fuel Spray Motion in Side Injection Combustion System for Diesel Engines" International Symposium COMODIA 90, pp. 281-286, 1990.