Evaluation of the predictive capability of diesel nozzle cavitation models

SAE Technical Papers

Volumn , Issue , 2007, Pages

  Giannadakis, E ^a   Papoulias, D ^a   Gavaises, M ^a   Arcoumanis, C ^a   Soteriou, C ^b   Tang, W ^b  

^a CITY UNIVERSITY   (United Kingdom)

^b DELPHI CORPORATION   (United States)

Author keywords

Cavitation; Diesel Injectors; Modelling

Indexed keywords

COMPUTATIONAL FLUID DYNAMICS; LAGRANGE MULTIPLIERS; LIQUIDS; MODELS; NOZZLE DESIGN; TURBULENCE;

COMPARISON WITH EXPERIMENTS; COMPUTATIONAL FLUID DYNAMICS MODELS; DIESEL INJECTORS; DISCHARGE COEFFICIENTS; INJECTION PRESSURES; NUMERICAL IMPLEMENTATION; PREDICTIVE CAPABILITIES; RAYLEIGH-PLESSET EQUATION;

CAVITATION;

EID: 85072412995     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2007-01-0245     Document Type: Conference Paper

References (41)

1. Soteriou, C., Andrews R.J., and Smith M., Direct Injection Diesel Sprays and the Effect of Cavitation and Hydraulic Flip on Atomization. SAE Paper 950080, 1995.
2. Chaves, H., Knapp M., Kubitzek A., and Obermeier F., Experimental Study of Cavitation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles. SAE Paper 950290, 1995.
3. Soteriou, C., Smith M., and Andrews R.J., Diesel Injection-Laser Light Sheet Illumination of the Development of Cavitation in Orifices. IMechE Paper C529/018/98, 1998.
4. Afzal, H., Arcoumanis C., Gavaises M., and Kampanis N., Internal Flow in Diesel Injector Nozzles: Modelling and Experiments. IMechE Paper S492/S2/99, 1999.
5. Arcoumanis, C., Badami M., Flora H., and Gavaises M., Cavitation in Real-Size Multi-Hole Diesel Injector Nozzles. SAE Paper 2000-01-1249, 2000.
6. Arcoumanis, C., Gavaises M., Flora H., and Roth H., Visualisation of Cavitation in Diesel Engine Injectors. Mécanique & Industries, 2 (5): pp. 375-381, 2001.
7. Roth, H., Gavaises M., and Arcoumanis C., Cavitation Initiation, Its Development and Link with Flow Turbulence in Diesel Injector Nozzles. SAE Paper 2002-01-0214, 2002.
8. Payri, F., Benajes J., Pastor J.V., and Molina S., Influence of the Post-Injection Pattern on Performance, Soot and NOx Emissions in a HD Diesel Engine. SAE Paper 2002-01-0502, 2002.
9. Tamaki, N., Shimizu M., Nishida K., and Hiroyasu H., Effects of cavitation and internal flow on atomization of a liquid jet. Atomization and Sprays, 8 (2): pp. 179-197, 1998.
10. Kubota, A., Kato H., and Yamaguchi H., A New Modelling of Cavitating Flows-a Numerical Study of Unsteady Cavitation on a Hydrofoil Section. Journal of Fluid Mechanics, 240: pp. 59-96, 1992.
11. Avva, R.K., Singhal A., and Gibson D.H.,. An Enthalpy Based Model of Cavitation. in Cavitation and Multiphase Flow Forum, ASME FED. 1995.
12. Schmidt, D.P., Rutland C.J., and Corradini M.L., A Numerical Study of Cavitating Flow Through Various Nozzle Shapes. SAE Paper 971597, 1997.
13. Grogger, H.A., and Alajbegovic A.,. Calculation of the Cavitating Flow in Venturi Geometries using Two Fluid Model. in Proc. of FEDSM'98-1998 ASME Fluid Engineering Division Summer Meeting. Washington, D.C., USA. 1998.
14. Yuan, W., Sauer J., and Schnerr G.H.,. Modeling and Computation of Unsteady Cavitation Flows in Injection Nozzles. in 1st International Colloquium on Microhydrodynamics. Paris, France. 2000.
15. Marcer, R., Le Cottier P., Chaves H., Argueyrolles B., Habchi C., and Barbeau B., A Validated Numerical Simulation of Diesel Injector Flow Using a VOF Method. SAE Paper 2000-01-2932, 2000.
16. Singhal, A.K., Athavale M.M., Li H.Y., and Jiang Y.,. Mathematical basis and validation of the full cavitation model. in Proc. of FEDSM'01-2001 ASME Fluid Engineering Division Summer Meeting. New Orleans, Louisiana, USA. 2001.
17. Singhal, A.K., Athavale M.M., Li H.Y., and Jiang Y., Mathematical basis and validation of the full cavitation model. Journal of Fluids Engineering-Transactions of the ASME, 124 (3): pp. 617-624, 2002.
18. Giannadakis, E., Gavaises M., Roth H., and Arcoumanis C.,. Cavitation Modelling in Single-Hole Diesel Injector Based on Eulerian-Lagrangian Approach. in Proc. THIESEL International Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines. Valencia, Spain. 2004.
19. Brennen, C.E., Cavitation and Bubble Dynamics. New York; Oxford: Oxford University Press. 1995.
20. Plesset, M.S., and Prosperetti A., Bubble Dynamics and Cavitation. Annual Review of Fluid Mechanics, 9: pp. 145-185, 1977.
21. Bauer, D., Planung und Durchführung von Experimenten zur Validierung eines CFD-Codes für Kavitationsströmungen, in Institut für Mechanik und Fluiddynamik. Diplomarbeit, Technische Universität Bergakademie Freiberg, 2005.
22. Giannadakis, E., Modelling of Cavitation in Automotive Fuel Injector Nozzles. PhD Thesis, Imperial College, University of London, 2005.
23. Alajbegovic, A., Grogger H.A., and Philipp H.,. Calculation of Transient Cavitation in Nozzle Using the Two-Fluid Model. in Proc. 12th Annual Conference on Liquid Atomization and Spray Systems. Indianapolis, Indiana, USA. 1999.
24. Alajbegovic, A., Meister G., Greif D., and Basara B., Three phase cavitating flows in high-pressure swirl injectors. Experimental Thermal and Fluid Science, 26 (6-7): pp. 677-681, 2002.
25. Meyer, R.S., Billet M.L., and Holl J.W., Freestream Nuclei and Traveling-Bubble Cavitation. Journal of Fluids Engineering-Transactions of the ASME, 114 (4): pp. 672-679, 1992.
26. Feng, Z.G., and Michaelides E.E., Drag coefficients of viscous spheres at intermediate and high Reynolds numbers. Journal of Fluids Engineering- Transactions of the ASME, 123 (4): pp. 841-849, 2001.
27. Rusche, H., and Issa R.,. The Effect of Voidage on the Drag Force on Particles, Droplets and Bubbles in Dispersed Two-Phase Flow. in Proc. 2nd Japanese-European Two-Phase Flow Group Meeting. Tsukuba, Japan. 2000.
28. Auton, T.R., The dynamics of Bubbles, Drops and Particles in Motion in Liquids, in Department of Applied Mathematics and Theoretical Physics. PhD Thesis, University of Cambridge, 1984.
29. van Wijngaarden, L., Some Problems in the Formulation of the Equations for Gas/Liquid Flows, in Theoretical and Applied Mechanics, Koiter W.T., Editor. North-Holland Publishing Co: Amsterdam, The Netherlands. 1976.
30. Bagchi, P., and Balachandar S., Shear versus vortex-induced lift force on a rigid sphere at moderate Re. Journal of Fluid Mechanics, 473: pp. 379-388, 2002.
31. Farrell, K.J., Eulerian/Lagrangian analysis for the prediction of cavitation inception. Journal of Fluids Engineering-Transactions of the ASME, 125 (1): pp. 46-52, 2003.
32. Moss, W.C., Levantin J.L., and Szeri A.J., A New Damping Mechanism in Strongly Collapsing Bubbles. Proc. R. Soc. London A, 456 (2004): pp. 2983-2994, 2000.
33. Hinze, J.O., Turbulence. 2nd ed. New York: McGraw-Hill. p. 309. 1975.
34. Hsiao, C.-T., Chahine G.L., and Liu H.L., Scaling Effect on Bubble Dynamics in a Tip Vortex Flow: Prediction of Cavitation Inception and Noise. Report 98007-1, Dynaflow Inc., 2000.
35. Martínez-Bazán, C., Montañés J.L., and Lasheras J.C., On the breakup of an air bubble injected into a fully developed turbulent flow. Part 1. Breakup frequency. Journal of Fluid Mechanics, 401: pp. 157-182, 1999.
36. Gavaises, M., Modelling of Diesel Fuel Injection Processes. PhD Thesis, Imperial College, University of London, 1997.
37. Sato, Y., and Sekoguchi K., Liquid velocity distribution in two-phase bubble flow. International Journal of Multiphase Flow, 2: pp. 79-95, 1975.
38. Theofanous, T.G., and Sullivan J., Turbulence in 2-Phase Dispersed Flows. Journal of Fluid Mechanics, 116 (MAR): pp. 343-362, 1982.
39. Ishii, M., and Mishima K., 2-Fluid Model and Hydrodynamic Constitutive Relations. Nuclear Engineering and Design, 82 (2-3): pp. 107-126, 1984.
40. Roth, H., Giannadakis E., Gavaises M., Arcoumanis C., Omae K., Sakata I., Nakamura M., and Yanagihara H., Effect of Multi-Injection Strategy on Cavitation Development in Diesel Injector Nozzle Holes. SAE Paper 2005-02-1237, SAE Transactions, 2005.
41. Soteriou, C., Lambert M., Zuelch S., and Passerel D.,. The flow characteristics of high efficiency Diesel nozzles with enhanced geometry holes. in Proc. THIESEL International Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines. Valencia, Spain. 2006.