Validation of a newly developed quasi-dimensional combustion model - Application on a heavy duty di diesel engine

SAE Technical Papers

Volumn , Issue , 2004, Pages

  Pariotis, E G ^a   Hountalas, D T ^a  

^a NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION; COMPUTATIONAL FLUID DYNAMICS; CONSERVATION; FINITE VOLUME METHOD; FLOW OF GASES; FUEL INJECTION; FUELS; MIXING; POLLUTION; SOOT;

CONSERVATION EQUATIONS; DISTRIBUTION OF TEMPERATURE; FUEL INJECTION SYSTEMS; IN-CYLINDER PRESSURES; POLLUTANTS EMISSIONS; QUASI-DIMENSIONAL COMBUSTION MODEL; SEMI-EMPIRICAL CORRELATION; SPECIES CONCENTRATION;

DIESEL ENGINES;

EID: 85072412971     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2004-01-0923     Document Type: Conference Paper

References (34)

1. Weissbeck, H., "Technologies That Will Improve Diesels" presentation at SAE Congress 2002 Executive Panel:"The Diesel Engine of Tomorrow" Detroit, MI, 2002.
2. Foster, D.E., "Competition To The Diesel Engine?" presentation at SAE Congress 2002 Executive Panel: "The Diesel Engine of Tomorrow" Detroit, MI, 2002
3. Heywood, J.B., Internal Combustion Engine Fundamentals, McGraw-Hill, New York, 1988
4. Moser, F.X., Sams, T., Cartellieri, W., "Impact of Future Exhaust Gas Emission Legislation on the Heavy Duty Truck Engine" SAE Paper No 2001-01-0186.
5. Tow, T.C., Pierpont, D.A., Reitz, "Reducing Particulate and NOx Emissions by Using Multiple Injections in a Heavy Duty D.I. Diesel Engine" SAE Transactions paper No 940897
6. Montajir, R.M., Trunemoto, H., Ishitani, H., Minami, T., "Fuel Spray Behavior in a Small DI Diesel Engine: Effect of Combustion Chamber Geometry" SAE Transactions paper No 2000-01-0946
7. Assanis D.N., Heywood, J.B., "Development and Use of a Computer Simulation of the Turbocompounded Diesel System for Engine Performance and Component Heat Transfer Studies" SAE Transactions paper No 860329
8. Hountalas D.T., "Available Strategies for Improving the Efficiency of DI Diesel Engines-A Theoretical Investigation" SAE paper No 2000-01-1176
9. Kouremenos D.A., Hountalas, D.T., Binder K.B., "The Effect of EGR on the Performance and Pollutant Emissions of Heavy-Duty Diesel Engines Using Constant and Variable AFR" SAE Transactions paper No 2001-01-0198
10. Greeves, G., "Response of Diesel Combustion Systems to Increase of Fuel Injection Rate" SAE Transactions paper No 790037
11. Pariotis E. G., and Hountalas D. T., "A New Quasi-Three Dimensional Combustion Model for Prediction of DI Diesel Engines' Performance and Pollutant Emissions" SAE Paper No 2003-01-1060
12. Hountalas, D., Pariotis, E., "A Simplified Model for the Spatial Distribution of Temperature in a Motored DI Diesel Engine" SAE Transactions paper No 2001-01-1235
13. Griffin, M.D., et al., "Computational Fluid Dynamics Applied to Flows in an Internal Combustion Engine" AIAA, paper 78-57.
14. Ahmadi-Befrui, B., Gosman, A.D., Issa, R.I., Watkins, A.P., "EPISO-Implicit non-iterative solution procedure for the calculation of flows in reciprocating engine chambers" Computer Methods in Applied Mechanics and Engineering, Vol. 79, pp. 249-279, 1990 (Pubitemid 20693661)
15. Theodorakakos, A., Bergeles, G., "Numerical investigation of the flow inside a 4-X IC model diesel engine" Journal Entropie, No 200, pp 53-63, 1996.
16. Nishida, K., and Hiroyasu, H., "Simplified Three-Dimensional Modeling of Mixture Formation and Combustion in a D.I. Diesel Engine," SAE Transactions, paper No 890269, 1989
17. Gosman, A.D., et al., "Axisymmetric Flow in a Motored Reciprocating Engine" Proc. Inst. Mech. Engrs, Vol. 192, No. 11, pp. 213-223, 1978.
18. Ramos, J.I., Humphrey. A.C., and Sirignano, W.A., "Numerical Prediction of Axisymmetric Laminar and Turbulent Flows in Motored, Reciprocating Internal Combustion Engines" SAE Transactions, paper No 790356, 1979
19. Patankar, S. V., Numerical Heat Transfer and Fluid Flow, Hemisphere Publishing Corporation, Taylor & Francis Group, New York
20. Vickland, C.W., Strange, F.M., Bell, R.A., Starkman, E.S., "A consideration of the high temperature thermodynamics of internal combustion engines" SAE Transactions, 70, 785-793.
21. Fitzgeorge, D., and Allison, J.L., "Air Swirl in a Road-Vehicle Diesel Engine," Proc. Instn. Mech. Engrs. (A.D.), No 4,pp. 151, 1962-63
22. Bo, T., Clerides, D., Gosman, A., Theodossopoulos, P., "Prediction of the Flow and Spray Process in an Automobile DI Diesel Engine" SAE paper No 970882
23. Crowe, C., Sharama, M., Stock, D., "The Particle-Source-in-Cell (PSI-Cell) Model for Gas-Droplet Flows" ASME 75-WA/HT-25
24. Kouremenos, D.A., Rakopoulos, C.D., and Hountalas, D.T., "Multi-Zone Combustion Modeling for the Prediction of Pollutants Emissions and Performance of DI Diesel Engines" SAE Transactions, paper No 970635, 1997.
25. Rakopoulos, C.D., and Hountalas, D.T., "Development and validation of a 3-D multi-zone combustion model for the prediction of DI diesel engines performance and pollutants emissions" SAE Transactions, paper No 981021, 1998
26. Payri, F., Benajes, J., and Tinaut, F.V., "A Phenomenological Combustion Model for Direct Injection, Compression Ignition Engines" Applied Math. Modeling, Vol. 12, pp. 293-304, 1988 (Pubitemid 18622865)
27. Bazarri, Z., "A DI Diesel Combustion and Emission Predictive Capability for Use in Cycle Simulation" SAE paper 920462
28. Long, Y., Gakuma, H., Hiroyasu, H., "The Simulation of the Distribution of Temperature and Mass of Liquid and Vapor Fuels, and the Wall Impingement Spray Pattern in a Diesel Combustion Champer" SAE paper No 2000-01-1887
29. Hiroyasu, H., Arai, M., "Fuel Spray Penetration and Spray Angle of Diesel Engines" Transactions of JSAE, Vol. 21, pp. 5-11, 1980
30. Jung, D., Assanis, D., "Multi-Zone DI Diesel Spray Combustion Model for Cycle Simulation Studies of Engines Performance and Emissions" SAE paper 2001-01-1246
31. Borman, G.L., Johnson, J.K., "Unsteady Vaporization Histories and Trajectories of Fuel Drops injected into Swirling Air" SAE paper 598C, 1962
32. Wolfer, H.H., "Ignition Lag in Diesel Engines" VDI-Forschungsheft 392, 1938; Translated by Royal Aircraft Establishment, Farnborough Library No. 358, UDC 621-436.047, August 1959
33. Payri F., Desantes J.M., Pastor J.V., "LDV measurements of the flow inside the combustion chamber of a 4-valve D.I. diesel engine with axisymmetric piston bowls" Experiments in Fluids, Vol. 22, pp. 118-128, 1996 (Pubitemid 126550776)
34. Dec, J., "A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging" SAE Transactions paper No 970873