Investigation of the machining of titanium components for lightweight vehicles

SAE Technical Papers

Volumn , Issue , 2010, Pages

  Kuttolamadom, Mathew A ^a   Jones, Joshua J ^a   Mears, M Laine ^a   Kurfess, Thomas R ^a   Choragudi, Aditya S ^a  

^a CLEMSON UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AEROSPACE APPLICATIONS; ALUMINUM ALLOYS; AUTOMOBILE MANUFACTURE; CORROSION RESISTANCE; CORROSION RESISTANT ALLOYS; COST ACCOUNTING; COSTS; ECONOMIC AND SOCIAL EFFECTS; ENERGY UTILIZATION; LIGHT WEIGHT VEHICLES; TERNARY ALLOYS; TITANIUM ALLOYS; ULTRASONIC CUTTING; VANADIUM ALLOYS; WAGES; WEAR OF MATERIALS;

AUTOMOTIVE COMPONENT; CUTTING TOOL TECHNOLOGY; HIGH SPEED MACHINING; NONCONVENTIONAL MACHINING; PROCESSING COSTS; STRENGTH TO WEIGHT RATIO; TITANIUM COMPONENTS; ULTRASONIC MACHINING;

CUTTING TOOLS;

EID: 85072354581     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2010-01-0022     Document Type: Conference Paper

References (32)

1. Ezugwu, E.O., and, Wang Z.M., (1997). "Titanium alloys and their machinability-a review." Journal of Materials Processing Technology, Vol. 68, pp. 262-274. (Pubitemid 127393463)
2. Yamashita, Y., Takayama I., Fuji H., and, Yamazaki T., (2002). "Applications and Features of Titanium for Automotive Industry." Nippon Steel Technical Report, No.85, pp. 11-14 (Pubitemid 34505691)
3. U.S. Department of Defense. "Military Handbook-MIL-HDBK-5H: Metallic Materials and Elements for Aerospace Vehicles."
4. Froes, F.H., and, Faller K., (2001). "The use of Titanium in Family Automobiles: Current Trends." Journal of Minerals, Metals, and Materials Society, Vol. 53, No. 4, pp. 27-28. (Pubitemid 32444322)
5. Leyens, C., and, Peters M., (2003). "Titanium and Titanium Alloys: Fundamentals and Applications." Wiley-VCH, Weinheim, Germany.
6. Crowley, G., (2003). "How to Extract Low Cost Titanium Powder." Advanced Materials and Processes, Vol. 161, Num. 11, pp. 25-27.
7. Anderson, R.P., Ernest W., Jacobsen L., Kogut D., and, Steed J.M., (2004). "Commercialization of the Armstrong Process for Producing Titanium Alloy Powder." Cost-Affordable Titanium Symposium, Charlotte, NC, pp. 121-126.
8. Rivard, J.D.K., Blue C.A., Harper D.C., Kiggans J.O., Menchhofer P.A., Mayotte J.R., Jacobson L., and, Kogut D., (2005). "The Thermomechanical Processing of Titanium and Ti-6Al-4V Thin Gage Sheet and Plate." Journal of Minerals, Metals, and Materials Society, Vol. 57, Num. 11, pp. 58-67.
9. Jones, P.E., Eylon D., and, Keller M.M., (1998). "Development of permanent-mold cast TiAl automotive valves." Intermetallics, Vol. 6, pp. 703-708. (Pubitemid 128378725)
10. Sung, S.Y., and, Kim Y.J., (2006). "Economic net-shape forming of TiAl alloys for automotive parts." Intermetallics, Vol. 14, pp. 1163-1167.
11. Konig, W., (1979). "Applied Research on the Machinability of Titanium and its Alloys." Proc. AGARD Conf. Advanced Fabrication Processes, Florence, Italy, Vol. CP-256, pp. 10.
12. Calamaz, M., Coupard D., Girot F., (2008). "A new material model for 2D numerical simulation of serrated chip formation when machining titanium Ti-6Al-4V." Int. Journal of Machine Tools & Manufacture, Vol. 48, pp. 275-288.
13. Kertesz, K., Pryor R.J., Richerson D.W., and, Cutler R.A., (1988) "Machining Titanium Alloys with Ceramic Tools." Journal of Materials, Vol. 40, No. 5, pp. 50-51.
14. Wang, Z.G., Wong Y.S., and, Rahman M., (2005) "High-speed milling of titanium alloys using binderless CBN tools." Int. Journal of Machine Tools & Manufacture, Vol. 45, pp. 105-114.
15. Chen, P., (1992). "Cutting Temperature and Forces in Machining of High-Performance Materials with Self-Propelled Rotary Tool." JSME International Journal, Vol. 35, No. 1, pp. 180-185.
16. Kahles, J.F., Eylon D., Froes F.H., Field M., (1985) "Machining of titanium alloys." Journal of Metals, Vol. 37, pp. 27-35.
17. Calamaz, M., Coupard D., and, Girot F., (2008). "A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V." International Journal of Machine Tools & Manufacture, Vol. 48, pp. 275-288.
18. Calamaz, M., Limbo J., Nouari M., Espinosa C., Coupard D., Salun M., Girot F., and, Chieragatti R., (2009). "Toward a better understanding of tool wear effect through a comparison between experiments and SPH numerical modeling of machined hard materials." Int. Journal of Refractory Metals & Hard Materials, Vol. 27, pp. 595-604.
19. Su, Y., He N., Li L., and, Li X.L., (2006). "An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti-6Al-4V." Wear, Vol. 261, pp. 760-766. (Pubitemid 44402651)
20. Hong, S.Y., Markus I., and, Jeong W., (2001). "New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V." Machine Tool & Manufacture, Vol. 41, pp. 2245-2260. (Pubitemid 32785159)
21. Rahman, M., Wong Y.S., and, Zareena A.R., (2003). "Machinability of Titanium Alloys." JSME International Journal, Vol. 46, No. 1, pp. 107-115. (Pubitemid 37065360)
22. Rahman, M., Wang Z.G., and, Wong Y.S., (2006). "A Review on High-Speed Machining of Titanium Alloys." JSME International Journal, Vol. 49, No. 1, pp. 11-20. (Pubitemid 44420522)
23. Kalpakjian, S., (1997) Manufacturing Process for Engineering Materials, 3rd ed., Addison-Wesley, Menlo Park, CA.
24. Lin, Y.C., Yan B.H., and, Chang Y.S., (2000). "Machining characteristics of titanium alloy (Ti-6Al-4V) using a combination process of EDM with USM." Journal of Materials Processing Technology, Vol. 104, pp. 171-177.
25. Kumar, J., Khamba J.S., and, Mohapatra S.K., (2008). "An investigation into the machining characteristics of titanium using ultrasonic machining." Int. J. Machining and Machinability of Materials, Vol. 3, No. 1/2, pp. 143-161. (Pubitemid 351454515)
26. Singh, R., and, Khamba J.S., Ultrasonic machining of titanium and its alloys: a review, J. Mater. Process. Technol. 173 (2006), pp. 125-135. (Pubitemid 43326162)
27. Coromant Sandvik, (2008), "Application Guide: Titanium Machining."
28. Coromant Sandvik, (2008), "Application Guide: Milling Methods."
29. Childs, T., Maekawa, K., Obikawa, T., and, Yamane, Y., (2000), Metal Machining: Theory and Applications, Elsevier Butterworth-Heinemann.
30. Burger, U., Kuttolamadom M., Bryan A., Mears L., and, Kurfess T., (2009), "Volumetric Flank Wear Characterization for Titanium Milling Inserts Tools," MSEC2009-82456.
31. International Standards Organization, 2, "Tool Life Testing in Milling-Part 2 End Milling," ISO 8688-2
32. Shaffer, W., 2007, "Gaining the Edge in CBN Tool Performance," 09/21/2009, < http://gearsolutions.com/ >