Nano-lignocellulose from recycled fibres in coatings from aqueous and ethanolic media: Effect of residual lignin on wetting and offset printing quality

Nordic Pulp and Paper Research Journal

Volumn 34, Issue 2, 2019, Pages 200-210

  Imani, Monireh ^a,b   Ghasemian, Ali ^a   Dehghani Firouzabadi, Mohammad Reza ^a   Afra, Elyas ^a   Gane, Patrick A C ^b   Rojas, Orlando J ^b  

^a GORGAN UNIVERSITY OF AGRICULTURAL SCIENCES AND NATURAL RESOURCES   (Iran)

^b AALTO UNIVERSITY   (Finland)

Author keywords

coating; nano holocellulose (NHC); nano lignocellulose (NLC); offset printing; surface properties

Indexed keywords

CELLULOSE; DETERIORATION; ELECTROSTATICS; FIBERS; HYDROPHILICITY; LIGNIN; MORPHOLOGY; NANOCELLULOSE; OFFSET PRINTING; SURFACE MORPHOLOGY; SURFACE PROPERTIES; SURFACE RESISTANCE; SURFACE ROUGHNESS; WETTING;

ELECTROSTATIC CHARGES; HOLOCELLULOSE; MECHANICAL PROCESS; NANO-LIGNOCELLULOSE (NLC); RUB-OFF RESISTANCE; SURFACE SMOOTHNESS; TEMPO-MEDIATED OXIDATION; WATER-ALCOHOL MIXTURES;

COATINGS;

CELLULOSE; DEGRADATION; ELECTROSTATICS; FIBERS; WATER; WETTABILITY;

EID: 85063756043     PISSN: 02832631     EISSN: 20000669     Source Type: Journal    
DOI: 10.1515/npprj-2018-0053     Document Type: Article

References (45)

1. Arif Butt, M., Chughtai, A., Ahmad, J., Ahmad, R., Majeed, U., Khan, I.H. (2008) Theory of adhesion and its practical implications: a critical review. J. Fac. Eng. Technol. 15(1):21-45.
2. Cathy, J., Ridgway, C.J., Gane, P.A.C. (2011) Constructing NFC-pigment composite surface treatment for enhanced paper stiffness and surface properties. Cellulose 19(2):547-560.
3. Chinga, G., Helle, T. (2003) Relationships between the coating surface structural variation and print quality. J. Pulp Pap. Sci. 29(6):179-184.
4. Drobchenko, A. (2004) Automated picking assessment using machine vision. Master's thesis, Lappeenranta University of Technology, Department of Information Technology, Lappeenranta, Finland.
5. Ebrahim Pour Kasmani, K., Mahdavi, S., Alizadeh, A., Nemati, M., Samariha, A. (2013) Physical properties and printability characteristics of mechanical printing paper with LWC. BioResources 8(3):3646-3656.
6. El-Sherif, H.M., Nasser, A.M., Hussin, A.I.H., El-Wahab, A., Ghazy, M.B.M., Elsayed, A.E. (2017) Nano emulsion binders for paper coating synthesis and application. J. Macromol. Sci. 54(5):271-287.
7. Fiserova, M., Gigac, J., Balbercak, J. (2010) Relationship between fibre characterisation and tensile strength of hardwood and softwood Kraft pulps. Cellul. Chem. Technol. 44(7-8):249-253.
8. Gane, P.A.C. (2017) Paper and board. Determination of resistance to picking. Accelerated speed method using the IGT-type tester (electric model), Licensed to Omya International AG International standard ISO3783, Oftringen, Switzerland.
9. Gane, P.A.C., Ridgway, C.J., Gliese, T. (2006) A re-evaluation of factors controlling print rub on matt and silk coated papers. Nord. Pulp Pap. Res. J. 21(3):382-394.
10. Ghasemian, A., Khalili, A. (2011) In: Fundamentals and Procedures of Paper Recycling. Aeeizh publishing, Tehran, Iran. pp. 1-20 (in Farsi).
11. Gigac, J., Kasajová, M., Maholányiová, M., Stankovská, M., Letko, M. (2013) Prediction of surface structure of coated paper and of ink setting time by infrared spectroscopy. Nord. Pulp Pap. Res. J. 28(2):274-281.
12. Gigac, J., Kasajova, M., Stankovska, M. (2014) The influence of paper surface energy on multicolor offset print mottling. Tappi J. 13(2):55-64.
13. Gigac, J., Stankovská, M., Kasajová, M. (2011) Interaction between offset papers and liquids. Wood Res. 56(3):363-370.
14. Hamada, H., Bousfield, D.W. (2010) Nanofibrillated cellulose as a coating agent to improve print quality of synthetic fibre sheets. Tappi J. 9(11):25-29.
15. Hansson, P., Johansson, P.A. (1999) A new method for the simultaneous measurement of surface topography and ink distribution on prints. Nord. Pulp Pap. Res. J. 14(4):315-319.
16. Hubbe, M.A., Ferrer, A., Tyagi, P., Yin, Y., Salas, C., Pal, L., Rojas, O.J. (2017) Nanocellulose in thin films, coatings, and plies for packaging applications: a review. BioResources 12(1):2143-2233.
17. IGT Testing Systems (1994) IGT Information leaflet W30-determination of the abrasion resistance and ink transfer to unprinted areas. 1100 AR Amsterdam, The Netherlands. Available from: http://www.igt.nl/test-methods/aic2-5.
18. IGT Testing Systems (2006) IGT Information leaflet W72 Ink transfer-W32 Wet pick-W48 Set-off and W49 Print gloss (at 75°). 1100 AR Amsterdam, The Netherlands. Available from: http://www.igt.nl/test-methods/aic2-5.
19. Kipphan, H. (2001) In: Handbook of Print Media Technologies and Production Methods. Springer, Berlin. pp. 52-137.
20. Koivula, H. (2012) Studies in offset ink setting. Ph. D. thesis, Abo Akademi University, Department of Chemical Engineering, Abo, Finland.
21. Kumar Rastogi, V., Samyn, P. (2015) Bio-based coatings for paper applications. Coatings 5(4):887-930.
22. Li, Y. (2010) Characterization of the effect of surface properties of tissue paper on print quality. In: 17th IAPRI World Conf., Collaboration with Jinan University, BIGC, Jiangnan University, Tianjin University and CEPI, October 12-15, Tianjin, China. pp. 68-71.
23. Madstedt, S. (2008) The impact of coating composition on print mottle and print gloss variations in sheet-fed offset. Master of Science thesis, Royal Institute of Technology, School of Computer Science and Communication, Stockholm, Sweden.
24. Mesic, B., Lestelius, M., Engström, G., Edholm, B. (2005) Printability of PE-coated paperboard with water-borne flexography: effects of corona treatment and surfactants addition. Pulp Pap. Can. 106(11):36-41.
25. Oittinen, P., Saarelma, H. (1998) In: Papermaking Science and Technology. Fapet Oy, Finland. pp. 233-236.
26. Olsson, R. (2007) Some aspects on flexographic ink-paper and paperboard coating interaction. Ph. D. thesis, Karlstad University Studies, Karlstad, Sweden.
27. Osong, S.H., Norgren, S., Engstrand, P., Lundberg, M., Hansen, P. (2014) Crill: a novel technique to characterize nano-ligno-cellulose. Nord. Pulp Pap. Res. J. 29(2):190-194.
28. Ottesen, V., Kumar, V., Toivakka, M., Chinga-Carrasco, G., Syverud, K., Weiby Gregersen, Ø. (2017) Viability and properties of roll-to-roll coating of cellulose nanofibrils on recycled paperboard. Nord. Pulp Pap. Res. J. 32(2):179-188.
29. Peng, Y., Gardner, D.J., Han, Y., Cai, Z., Tshabalala, M.A. (2013) Influence of drying method on the surface energy of cellulose nanofibrils determined by inverse gas chromatography. J. Colloid Interface Sci. 405:85-95.
30. Pucekovic, N., Hooimeijer, A., Lozo, B. (2015) Cellulose nanocrystals coating-a novel paper coating for use in the graphic industry. Acta Graph. 26(4):21-26.
31. Ridgway, C.J., Gane, P.A.C. (2001) Dynamic absorption into simulated porous structures. Colloids Surf., A, Physicochem. Eng. Asp. 206(1):217-239.
32. Rojo, E., Peresin, M.S., Sampson, W.W., Hoeger, I.C., Vartiainen, J., Janne, L., Rojas, O.J. (2015) Comprehensive elucidation of the effect of residual lignin on the physical, barrier, mechanical and surface properties of nanocellulose films. Green Chem. J. 17:1853-1866.
33. Schoelkopf, J., Gane, P.A.C., Ridgway, C.J., Matthews, G.P. (2000) Influence of inertia on liquid absorption into paper coating structures. Nord. Pulp Pap. Res. J. 15(5):422-430.
34. Shanmugam, K., Doosthosseini, H., Varanasi, S., Garnier, G., Batchelor, W. (2018) Flexible spray coating process for smooth nanocellulose film production. Cellulose 25(3):1725-1741.
35. Song, Z., Xiao, H., Li, Y. (2015) Effects of renewable materials coatings on oil resistant properties of paper. Nord. Pulp Pap. Res. J. 30(2):344-349.
36. Sood, Y.V., Tyagi, S., Tyagi, R., Pande, P.C., Tandon, R. (2010) Effect of base paper characteristics on coated paper quality. Indian J. Chem. Technol. 17:309-316.
37. Spence, K.L., Venditti, R.A., Rojas, O.J., Habibi, Y., Pawlak, J.J. (2010) The effect of chemical composition on microfibrillar cellulose films from wood pulps: water interactions and physical properties for packaging applications. Cellulose 17(4):835-848.
38. Stromberg, M. (2005) Paper dimensional stability in sheet-fed offset printing. Degree project, Hogskolan Dalarna, Sweden.
39. TAg, C.-M., Juuti, M., Koivunen, K., Gane, P.A.C. (2010a) Dynamic water transport in a pigmented porous coating medium: novel study of droplet absorption and evaporation by near infra-red probe spectroscopy. J. Ind. Eng. Chem. Res. 49(4):4181-4189.
40. TAg, C.-M., Toiviainen, M., Juuti, M., Gane, P.A.C. (2010b) Dynamic analysis of temporal moisture profiles in heatset printing studied with near infra-red probe spectroscopy. Meas. Sci. Technol. 21(10):1-11.
41. Thorman, S., Strom, G., Hagberg, A., Johansson, P. (2012) Uniformity of liquid absorption by coatings-technique and impact of coating composition. Nord. Pulp Pap. Res. J. 27(2):459-465.
42. Walker, W.C., Fetsko, J.M. (1955) A concept of ink transfer in printing. In: Technical Association of the Graphic Arts Proceedings. pp. 139-149.
43. Wenzel, R.N. (1936) Resistance of solid surfaces to wetting by water. Ind. Eng. Chem. 28(8):988-994.
44. Xu, Y., Kuang, Y., Salminen, P., Chen, G. (2016) The influence of nano-fibrillated cellulose as a coating component in paper coating. BioResources 11(2):4342-4352.
45. Zhang, X. (2009) High-speed inkjet printing on corrugated board packages evaluation on liner papers. Master's thesis, KTH Royal Institute of Technology, Stockholm, Sweden.