Transformer design principles: Third edition

Transformer Design Principles: Third Edition

Volumn , Issue , 2017, Pages 1-596

  Del Vecchio, Robert M ^b   Poulin, Bertrand ^c   Feghali, Pierre T ^c,d   Shah, Dilipkumar M ^a   Ahuja, Rajendra ^c  

^a North American Transformer ^*

^b North American Transformer (now SPX Transformer Solutions)   (United States)

^c IEEE   (United States)

^d STATE OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85058598796     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9781315155920     Document Type: Book

References (130)

1. M. Abramowitz and I. A. Stegun, Eds., Handbook of Mathematical Functions, Dover Publications, Inc., New York, 1972.
2. J. Acosta and K. J. Cornick, Computer models for complex plant based on terminal measurements, IEEE Trans. Power Deliv., 4(2), April 1989, 1393-1400.
3. P. D. Agarwal, Eddy current losses in solid and laminated iron, Trans. AIEE, 42(Pt. 1), 1959, 169-181.
4. R. Ahuja and R. M. Del Vecchio, Transformer stray loss and flux distribution studies using 3D finite element analysis, Trafotech 2006, Seventh International Conference on Transformers, Mumbai, India, January 20-21, 2006, pp. II-1-II-8.
5. R. Ahuja and R. M. Del Vecchio, Analysis of 2 core transformer designs, CIGRE session paper no. A2_210_2014, CIGRE 2014 General Session, Session 45, August 24-30, 2014.
6. American Institute of Physics Handbook, McGraw-Hill Book Co., Inc., New York, 1957.
7. ANSYS, Inc., Canonsburg, PA.
8. MAXWELL® is a product of Ansoft Corp., Pittsburgh, PA.
9. J. Aubin and Y. Langhame, Effect of oil viscosity on transformer loading capability at low ambient temperatures, IEEE Trans. Power Deliv., 7(2), April 1992, 516-524.
10. W. R. Bell, Influence of specimen size on the dielectric strength of transformer oil, IEEE Trans. Electr. Insul., EI-12(4), August 1977, 281-292.
11. L. F. Blume, A. Boyajian, G. Camilli, T. C. Lennox, S. Minneci, and V. M. Montsinger, Transformer Engineering, 2nd edn., John Wiley & Sons, Inc., New York, 1951.
12. A. K. Bose, Dynamic response of windings under short circuit, CIGRE International Conference on Large High Tension Electric Systems, 1972 Session, August 28-September 6, 1972.
13. V. Brandwajin, H. W. Dommel, and I. I. Dommel, Matrix representation of three-phase transformers for steady-state and transient studies, IEEE Trans. Power App. Syst., PAS-101(6), June 1982, 1369-1378.
14. R. V. Churchill, Complex Variables and Applications, 2nd edn., McGraw-Hill Book Co., Inc., New York, 1960.
15. F. M. Clark, Insulating Materials for Design and Engineering Practice, John Wiley & Sons, Inc., New York, 1962.
16. J. E. Clem, Equivalent circuit impedance of regulating transformers, AIEE Trans., 58, 1939, 871-873.
17. S. Cygan and J. R. Laghari, Dependence of the electric strength on thickness area and volume of polypropylene, IEEE Trans. Electr. Insul., EI-22(6), December 1987, 835-837.
18. J. W. Daily and D. R. F. Harleman, Fluid Dynamics, Addison-Wesley Publishing Co., Inc., Reading, MA, 1973.
19. M. G. Danikas, Breakdown of transformer oil, IEEE Electr. Insul. Mag., 6(5), September/ October 1990, 27-34.
20. F. de Leon and A. Semlyen, Efficient calculation of elementary parameters of transformers, IEEE Trans. Power Deliv., 7(1), January 1992, 376-383.
21. F. de Leon and A. Semlyn, Reduced order model for transformer transients, IEEE Trans. Power Deliv., 7(1), January 1992, 361-369.
22. R. M. Del Vecchio, B. Poulin, P. T. Feghali, D. M. Shah, and R. Ahuja, Transformer Design Principles, 2nd edn., CRC Press, Boca Raton, FL, 2010.
23. R. M. Del Vecchio, Magnetostatics, in: Encyclopedia of Applied Physics, Vol. 9, VCH Publishers, Inc., 1994, pp. 207-227.
24. R. M. Del Vecchio, B. Poulin, and R. Ahuja, Calculation and measurement of winding disk capacitances with wound-in-shields, IEEE Trans. Power Deliv., 13(2), April 1998, 503-509.
25. R. M. Del Vecchio and P. Feghali, Thermal model of a disk coil with directed oil flow, 1999 IEEE Transmission and Distribution Conference, Now Orleans, LA, April 11-16, 1999, pp. 914-919.
26. R. M. Del Vecchio, B. Poulin, and R. Ahuja, Radial buckling strength calculation and test comparison for core-form transformers, Proceedings of the 2001 International Conference of Doble Clients-Sec 8-1, Doble Engineering Company, Watertown, MA, 2001.
27. R. M. Del Vecchio, R. Ahuja, and R. D. Frenette, Determining ideal impulse generator settings from a generator-transformer circuit model, IEEE Trans. Power Deliv., 17(1), January 2002, 142-148.
28. R. M. Del Vecchio, Eddy-current losses in a conducting plate due to a collection of bus bars carrying currents of different magnitudes and phases, IEEE Trans. Magn., 39(1), January 2003, 549-552.
29. R. M. Del Vecchio, Geometric effects in the electrical breakdown of transformer oil, IEEE Trans. Power Deliv., 19(2), April 2004, 652-656.
30. R. M. Del Vecchio, Applications of a multiterminal transformer model using two winding leakage inductances, IEEE Trans. Power Deliv., 21(3), July 2006, 1300-1308.
31. R. M. Del Vecchio, Multiterminal three phase transformer model with balanced or unbalanced loading, IEEE Trans. Power Deliv., 23(3), July 2008, 1439-1447.
32. R. M. Del Vecchio and R. Ahuja, Analytic nonlinear correction to the impedance boundary condition, IEEE Trans. Magn., 49(12), December 2013, 5687-5691.
33. R. M. Del Vecchio, Directed oil flow cooling of disk windings using graph theory, IEEE Trans. Power Deliv., 29(5), October 2014, 2279-2286.
34. N. Deo, Graph Theory with Applications to Engineering and Computer Science, Prentice Hall, Englewood Cliffs, NJ, 1974.
35. C. A. Desoer and E. S. Kuh, Basic Circuit Theory, McGraw-Hill Book Co., New York, 1969.
36. R. J. Duffin, E. L. Peterson, and C. Zener, Geometric Programming, Wiley, New York, 1967.
37. H. B. Dwight, Tables of Integrals and Other Mathematical Data, 4th edn., The MacMillan Co., New York, 1961.
38. C. Eastgate, Simplified steady-state thermal calculations for naturally cooled transformers, Proc. IEE, 112(6), June 1965, 1127-1134.
39. H. S. Endicott and K. H. Weber, Electrode area effect for the impulse breakdown of transformer oil, Trans. IEEE, August 1957, 393-398.
40. J. A. C. Forrest and R. E. James, Improvements in or relating to windings for inductive apparatus, Patent no. 1, 158, 325, The Patent Office, London, U.K., July 16, 1969.
41. M. A. Franchek and T. A. Prevost, EHV Weidmann, private communication.
42. T. J. Gallager, Simple Dielectric Liquids, Clarendon Press, Oxford, U.K., 1975.
43. D. H. Gillott and J. F. Calvert, IEEE Trans. Magn., 1, 1965, 126.
44. P. E. Gill, W. Murray, and M. H. Wright, Practical Optimization, Academic Press, NY, 1981.
45. G. H. Golub and C. F. Van Loan, Matrix Computations, 2nd edn., The Johns Hopkins University Press, Baltimore, MD, 1989.
46. J. A. Greenwood and J. B. P. Williamson, Electrical conduction in solids, II. Theory of temperature- dependent conductors, Proc. Roy. Soc. Lond. A, 246, 1958, 13-31.
47. J. A. Greenwood, Constriction resistance and the real area of contact, Brit. J. Appl. Phys., 17, 1966, 1621-1632.
48. A. Greenwood, Electrical Transients in Power Systems, Wiley-Interscience, a Division of John Wiley & Sons, Inc., New York, 1971.
49. F. W. Grover, Inductance Calculations, Dover Publications, Inc., New York, 1973 (Special edition prepared for the Instrument Society of America).
50. C. Guerin, G. Meunier, and G. Tanneau, Surface impedance for 3D non-linear eddy current problems-Application to loss computation in transformers, IEEE Trans. Magn., 32(3), May 1996, 808-811.
51. E. J. Gumbel, Statistics of Extremes, Columbia University Press, New York, 1958.
52. H. Higake, K. Endou, Y. Kamata, and M. Hoshi, Flashover characteristics of transformer oil in large cylinder-plane electrodes up to gap length of 200 mm, and their application to the insulation from outer winding to tank in UHV transformers, IEEE PES Winter Meeting, New York, January 26-31, 1975.
53. K. Hiraishi, Y. Hore, and S. Shida, Mechanical strength of transformer windings under shortcircuit conditions, Paper 71 TP 8-PWR, Paper presented at the, IEEE Winter Power Meeting, New York, January 31-February 5, 1971.
54. J. E. Hobson and W. A. Lewis, Regulating transformers in power-system analysis, AIEE Trans., 58, 1939, 874-886.
55. S. A. Holland, G. P. O’Connell, and L. Haydock, Calculating stray loss in power transformers using surface impedance with finite elements, IEEE Trans. Magn., 28(2), March 1992, 1355-1358.
56. L. P. Huelsman, Basic Circuit Theory with Digital Computations, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1972.
57. ANSI/IEEE C57.92-1981, Guide for loading mineral oil immersed transformers up to and including 100 MVA with 55°C or 65°C average winding rise, 1981.
58. IEEE Std. C57.12.00-1993, IEEE standard general requirements for liquid-immersed distribution, power, and regulating transformers, IEEE, August 27, 1993.
59. IEEE Std. C57.12.00-2010, IEEE standard for general requirements for liquid-immersed distribution, power, and regulating transformers, IEEE, New York, September 10, 2010.
60. IEEE Std. C57.12.90-2010, IEEE standard test code for liquid-immersed distribution, power, and regulating transformers, IEEE, New York, October 15, 2010.
61. M. P. Jain and L. M. Ray, Field pattern and associated losses in aluminum sheet in presence of strip bus bars, IEEE Trans. Power App. Syst., PAS-89(7), September/October 1970, 1525-1539.
62. S. Jeszenszky, History of transformers, IEEE Power Eng. Rev., 16(12), December 1996, 9-12.
63. R. B. Kaufman and J. R. Meador, Dielectric tests for EHV transformers, IEEE Trans. PAS, PAS-87(1), January 1968, 135-145.
64. J. A. Kok, Electrical Breakdown of Insulating Liquids, Interscience Publishers, Inc., New York, 1961.
65. A. Kost, J. P. A. Bastos, K. Miethner, and L. Janicke, Improvement of nonlinear impedance boundary conditions, IEEE Trans. Magn., 38(2), March 2002, 573-576.
66. R. F. Krause and R. M. Del Vecchio, Low core loss rotating flux transformer, J. Appl. Phys., 64(10), November 15, 1988, 5376-5378.
67. L. Krahenbuhl, O. Fabregue, S. Wanser, M. De Sousa Dias, and A. Nicolas, Surface impedances, BIEM and FEM coupled with 1D non linear solutions to solve 3D high frequency eddy current problems, IEEE Trans. Magn., 33(2), March 1997, 1167-1172.
68. A. Kramer and J. Ruff, Transformers for phase angle regulation considering the selection of on-load tap-changers, IEEE Trans. Power Deliv., 13(2), April 1998, 518-525.
69. F. Kreith and W. Z. Black, Basic Heat Transfer, Harper & Row Publishers, New York, 1980.
70. E. Kuffel and W. S. Zaengl, High Voltage Engineering, Pergamon Press, New York, 1988.
71. S. V. Kulkarni, Stray loss in power transformer-Evaluation and experimental verification, Thesis, Department of Electrical Engineering, Indian Institute of Technology, Mumbai, India, 1999.
72. S. V. Kulkarni and S. A. Khaparde, Transformer Engineering, Marcel Dekker, Inc., New York, 2004.
73. D. Labridis and P. Dokopoulos, Calculation of eddy current losses in nonlinear ferromagnetic materials, IEEE Trans. Magn., 35(3), May 1989, 2665-2669.
74. J. Lammeraner and M. Stafl, Eddy Currents, Iliffe Books, Ltd., London, U.K., 1966.
75. L. Leites, Lecture notes from presentation at North American Transformer Plant, Milpitas, CA, April 1999.
76. O. Lesaint and T. V. Top, Streamer initiation in mineral oil. Part I: Electrode surface effect under impulse voltage, IEEE Trans. Dielectr. Electr. Insul., 9(1), February 2002, 84-91.
77. W. V. Lyon, Applications of the Method of Symmetrical Components, McGraw-Hill Book Co., Inc., New York, 1937.
78. S. Maximov, J. C. Olivares-Galvan, S. Magdaleno-Adame, R. Escarela-Parez, and E. Campero-Littlewood, New analytical formulae for electromagnetic field and eddy current losses in bushing regions of transformers, IEEE Trans. Magn., 51(4), April 2015, 1-10.
79. S. Maximov, R. Escarela-Perez, J. C. Olivares-Galvan, J. Guzman, and E. Campero-Littlewood, New analytical formula for temperature assessment on transformer tanks, IEEE Trans. Power Deliv., 31(3), June 2016, 1122-1131.
80. W. J. McNutt, Insulation thermal life considerations for transformer loading guides, Paper presented at the IEEE/PES Summer Meeting, San Diego, CA, July 28-August 1, 1991.
81. S. P. Mehta, N. Aversa, and M. S. Walker, Transforming transformers, IEEE Spectrum, 34, July 1997, 43-49.
82. A. Miki, T. Hosoya, and K. Okuyama, A calculation method for impulse voltage distribution and transferred voltage in transformer windings, IEEE Trans. PAS, PAS-97(3), May/June 1978, 930-939.
83. Members of the Staff of the Department of Electrical Engineering of the Massachusetts Institute of Technology, Magnetic Circuits and Transformers, The MIT Press, Massachusetts Institute of Technology, Cambridge, MA, 1943.
84. E. E. Mombello, Impedances for the calculation of electromagnetic transients within transformers, IEEE Trans. Power Deliv., 17(2), April 2002, 479-488.
85. H. P. Moser, Transformerboard, Special print of Scientia Electrica, 1979.
86. H. P. Moser and V. Dahinden, Transformerboard II, H. Weidmann AG, Ch-8640, Rapperswil, Switzerland, 1987.
87. J. K. Nelson, An assessment of the physical basis for the application of design criteria for dielectric structures, IEEE Trans. Electr. Insul., 24(5), October 1989, 835-847.
88. E. T. Norris, The lightening strength of power transformers, J. Inst. Electr. Eng., 95, 1948, 389-406.
89. R. van Nuys, Interleaved high-voltage transformer windings, IEEE Trans. Power App. Syst., PAS-97(5), September/October 1978, 1946-1954.
90. A. J. Oliver, Estimation of transformer winding temperatures and coolant flows using a general network method, IEE Proc. C, 127(6), November 1980, 395-405.
91. R. M. Olson, Essentials of Engineering Fluid Mechanics, 4th edn., Harper & Row Publishers, New York, 1980.
92. S. Palmer and W. A. Sharpley, Electric strength of transformer insulation, Proc. IEE, 116, 1969, 1965-1973.
93. M. R. Patel, Dynamic stability of helical and barrel coils in transformers against axial shortcircuit forces, IEE Proc. C, 127(5), September 1980, 281-284.
94. D. Pavlik, D. C. Johnson, and R. S. Girgis, Calculation and reduction of stray and eddy losses in core-form transformers using a highly accurate finite element technique, IEEE Trans. Power Deliv., 8(1), January 1993.
95. F. W. Peek, Jr., Dielectric Phenomena in High Voltage Engineering, 3rd edn., McGraw-Hill Book Co., New York, 1929.
96. L. W. Pierce, An investigation of the thermal performance of an oil filled transformer winding, IEEE Trans. Power Deliv., 7(3), July 1992, 1347-1358.
97. L. W. Pierce, Predicting liquid filled transformer loading capability, IEEE/IAS Petroleum and Chemical Industry Technical Conference, San Antonio, TX, September 28-30, 1992.
98. R. H. Pry and C. P. Bean, Calculation of the energy loss in magnetic sheet materials using a domain model, J. Appl. Phys., 29(3), 1958, 532-533.
99. E. M. Pugh and E. W. Pugh, Principles of Electricity and Magnetism, Addison-Wesley Publishing Co., Inc., Reading, MA, 1962.
100. L. Rabins, Transformer reactance calculations with digital computers, AIEE Trans., 75(Pt. I), July 1956, 261-267.
101. J. A. Rees, Ed., Electrical Breakdown in Gasses, John Wiley & Sons (A Halsted Press Book), New York, 1973.
102. W. M. Rohsenow, J. P. Hartnett, and E. N. Ganic, Eds., Handbook of Heat Transfer Fundamentals, 2nd edn., McGraw-Hill Book Co., New York, 1985.
103. R. Rudenberg, Performance of traveling waves in coils and windings, Trans. AIEE, 59, 1940, 1031-1040.
104. R. Rudenberg, Electrical Shock Waves in Power Systems, Harvard University Press, Cambridge, MA, 1968.
105. K. Samarawickrama, N. D. Jacob, and B. Kordi, Impulse generator optimum setup for transient testing of transformers using frequency-response analysis and genetic algorithm, IEEE Trans. Power Deliv., 30(4), August 2015, 1949-1957.
106. M. P. Saravolac, P. A. Vertigen, C. A. Sumner, and W. H. Siew, Design verification criteria for evaluating the short circuit withstand capability of transformer inner windings, CIGRE, 2000 Session, 12-208, 2000.
107. R. B. Shipley, D. Coleman, and C. F. Watts, Transformer circuits for digital studies, AIEE Trans. III, 81, February 1963, 1028-1031.
108. W. R. Smythe, Static and Dynamic Electricity, 3rd edn., McGraw-Hill Book Co., New York, 1968.
109. E. Stenkvist and L. Torseke, Short-circuit problems in large transformers, CIGRE, Report no. 142, Appendix II, 1962.
110. W. D. Stevenson, Jr., Elements of Power System Analysis, McGraw-Hill Book Co., Inc., New York, 1962.
111. G. M. Stein, A study of the initial serge distribution in concentric transformer windings, IEEE Trans. PAS, PAS-83, September 1964, 877-893.
112. R. B. Steel, W. M. Johnson, J. J. Narbus, M. R. Patel, and R. A. Nelson, Dynamic measurements in power transformers under short-circuit conditions, International Conference on Large High Tension Electric Systems, CIGRE, 1972 Session, August 28-September 6, 1972.
113. E. D. Taylor, B. Berger, and B. E. Western, An experimental approach to the cooling of transformer coils by natural convection, Paper no. 2505 S, IEE, April 1958.
114. H. A. Thompson, F. Tillery, and D. U. von Rosenberg, The dynamic response of low voltage, high current, disk type transformer windings to through fault loads, IEEE Trans. Power App. Syst., PAS-98(3), May/June 1979, 1091-1098.
115. S. Timoshenko, Strength of Materials, Parts I and II, 3rd edn., D. Van Nostrand Co., Inc., Princeton, NJ, 1955 (Part II 1956).
116. S. P. Timoshenko and J. N. Goodier, Theory of Elasticity, 3rd edn., McGraw-Hill Book Co., New York, 1970.
117. T. V. Top, G. Messala, and O. Lesaint, Streamer propagation in mineral oil in semi-uniform geometry, IEEE Trans. Dielectr. Electr. Insul., 9(1), February 2002, 76-83.
118. T. V. Top and O. Lesaint, Streamer initiation in mineral oil. Part II: Influence of a metallic protrusion on a flat electrode, IEEE Trans. Dielectr. Electr. Insul., 9(1), February 2002, 92-96.
119. N. Giao Trinh, C. Vincent, and J. Regis, Statistical dielectric degradation of large-volume oil-insulation, IEEE Trans. Power App. Syst., PAS-101(10), October 1982, 3712-3721.
120. M. Waters, The Short-Circuit Strength of Power Transformers, Macdonald & Co. (Publishers) Ltd., London, U.K., 1966.
121. K. H. Weber and H. S. Endicott, Area effect and its extremal basis for the electric breakdown of transformer oil, AIEE Trans., June 1956, 371-381.
122. Central Station Engineers of the Westinghouse Electric Corp, Electrical Transmission and Distribution Reference Book, Westinghouse Electric Corp., E. Pittsburgh, PA, 1964.
123. W. R. Wilson, A fundamental factor controlling the unit dielectric strength of oil, AIEE Trans. PAS, 72, February 1953, 68-74.
124. R. W. Wilson, The contact resistance and mechanical properties of surface films on metals, Proc. Phys. Soc. B, 68, 1955, 625-641.
125. D. J. Wilde and C. S. Beightler, Foundations of Optimization, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1967.
126. J. B. P. Williamson, Intensive course on electrical contacts, Course notes, sponsored by the IEEE Holm Conference on Electrical Contacts, 1987.
127. D. J. Wilcox, M. Conlon, and W. G. Hurley, Calculation of self and mutual impedances for coils on ferromagnetic cores, IEE Proc. A, 135(7), September 1988, 470-476.
128. D. J. Wilcox, W. G. Hurley, and M. Conlon, Calculation of self and mutual impedances between sections of transformer windings, IEE Proc. C, 136(5), September 1989, 308-314.
129. S. Yuferev and N. Ida, Selection of the surface impedance boundary conditions for a given problem, IEEE Trans. Magn., 35(3), May 1999, 1486-1489.
130. S. Yuferev and L. Di Rienzo, Surface impedance boundary conditions in terms of various formalisms, IEEE Trans. Magn., 46(9), September 2010, 3617-3628.