Strain gauge measurements from bone surfaces

Mechanical Testing of Bone and the Bone-Implant Interface

Volumn , Issue , 1999, Pages 305-320

  Szivek, John A ^a   Gharpuray, Vasanti M ^b  

^a UNIVERSITY OF ARIZONA COLLEGE OF MEDICINE   (United States)

^b AMRL   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85057706749     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (86)

1. Little, E.G. and Finlay, J.B., Perspectives of strain measurement techniques, in Strain Measurement in Biomechanics, Miles, A.W. and Tanner, K.E., Eds., Chapman & Hall, London, 1992, 1.
2. Finlay, J.B., Bourne, R.B., Landsberg, R.P., and Andreae, P., Pelvic stresses in vitro, I: malsizing of endoprostheses, J. Biomech., 19, 708, 1986.
3. Finlay, J.B., Bourne, R.B., Landsberg, R.P., and Andreae, P., Pelvic stresses in vitro, II: a study of the efficacy of metal-backed acetabular prostheses, J. Biomech., 19, 715, 1986.
4. Hasenkam, J.M., Nygaard, H., Paulsen, P.K., et al., What force can the myocardium generate on a prosthetic mitral valve ring? An animal experimental study, J. Heart Valve Dis., 3, 324, 1994.
5. Nagata, H., Schendel, M.J., Transfeldt, E.E., and Lewis, J.L., The effects of immobilization of long segments of the spine on the adjacent and distal facet force and lumbosacral motion, Spine, 18, 2471, 1993.
6. Bowman, S.M., Zeind, J., Gibson, L.J., et al., The tensile behavior of demineralized bovine cortical bone, J. Biomech., 29, 1497, 1996.
7. Roth, V. and Mow, V.C., The intrinsic tensile behavior of the matrix of bovine articular cartilage and its variation with age, J. Bone Joint Surg., 62, 1102, 1980.
8. Page, A.E., Jasty M., Harrigan, T. P., et al., Determination of loading parameters in the canine hip in vivo, J. Biomech., 26, 571, 1993.
9. Hylander, W.L., Johnson K.R., and Crompton A.W., Loading patterns and jaw movements during mastication in Macaca fascicularis: a bone-strain, electromyographic, and cineradiographic analysis, Am. J. Phys. Anthropol., 72, 287, 1987.
10. Swartz, M.S., Bennett, M.B., and Carrier, D.R., Wing bone stresses in free flying bats and the evolution of skeletal design for flight, Nature, 359, 726, 1992.
11. Lanyon, L.E. and Baggott, D.G., Mechanical function as an influence on the structure and form of bone, J. Bone Joint Surg., 58, 436, 1976.
12. Goodship, A.E., Lanyon, L.E., and McFie, H., Functional adaptation of bone to increased stress: an experimental study, J. Bone Joint Surg., 61A, 539, 1979.
13. Mikic, B. and Carter, D.R., Bone strain gage data and theoretical models of functional adaptation, J. Biomech., 28, 465, 1995.
14. Cheal, E.J., Hayes, W.C., White, A.A., and Perren, S.M., Three-dimensional finite element analysis of a simplified compression plate fixation system, J. Biomech. Eng., 106, 295, 1984.
15. Rohlmann, A., Mossner, U., Bergmann, G., and Kolbel, R., Finite element analysis and experimental investigation in a femur with hip endoprosthesis, J. Biomech., 16, 727, 1983.
16. Miles, A.W. and Tanner, K.E., Eds., Strain Measurements in Biomechanics, Chapman & Hall, London, 1992.
17. Dabestani, M., In vitro strain measurement in bone, in Strain Measurement in Biomechanics, Miles, A.W. and Tanner, K.E. Eds., Chapman & Hall, London, 1992, 58.
18. Thompson, K., On the electro-dynamic qualities of metals, Philos. Trans. R. Soc. London, 146, 649, 1856.
19. Eaton, E.C., Resistance strain gauge measures stresses, Concr. Eng. News Rec., 107, 615, 1931.
20. Clark, D.S. and Datwyler, G., Stress-strain relations under tension impact loading, Proc. ASM, 38, 98, 1938.
21. Simmons, E.E., U.S. Patent No. 2292549, 1942.
22. Measurements Group, TN-505, Technical Notes, Raleigh, NC, 1996.
23. Gurdjian, E.S. and Lissner, H.R., Mechanism of head injury as studied by the cathode ray oscilloscope: preliminary report, J. Neurosurg., 1, 393, 1944.
24. Evans, F.G., Methods of studying the biomechanical significance of bone form, Am. J. Phys. Anthropol., 11, 413, 1953.
25. Roberts, V.L., Strain-gauge techniques in biomechanics, Exp. Mech., 19A, 1966.
26. Cameron, J.J., Boodward, S.C., Pulaski, E.J., et al., The degradation of cyanoacrylate tissue adhesives, Surgery, 58, 424, 1965.
27. Leonard, F., Kulkarni, R.K., Brandes, G., et al., Synthesis and degradation of poly(alkylalphacy-anoacrylates), J. Appl. Polym. Sci., 10, 259, 1966.
28. Lanyon, L.E. and Smith, R.N., Bone strain in the tibia during normal quadrupedal locomotion, Acta Orthop. Scand., 41, 238, 1970.
29. Lanyon, L.E., Strain in sheep lumbar vertebrae recorded during life, Acta Orthop. Scand., 42, 102, 1971.
30. Cochran, G.V., Implantation of strain gages on bone in vivo, J. Biomech., 5, 119, 1972.
31. Lanyon, L.E., Analysis of surface bone strain in the calcaneus of sheep during normal locomotion, J. Biomech., 6, 41, 1973.
32. Lanyon, L.E., Hampson W.G., Goodship A.E., and Shah J.S., Bone deformation recorded in vivo from strain gauges attached to the human tibial shaft, Acta Orthop. Scand., 46, 256, 1975.
33. Rydell, N.W., Forces acting on the femoral head-prosthesis. A study of strain gauge supplied prostheses in living persons, Acta Orthop. Scand. 37 (Suppl. 88), 1, 1966.
34. Cochran, G.V., A method for direct recording of electromechanical data from skeletal bone in living animals. Technical notes, J. Biomech., 7, 563, 1974.
35. Lanyon, L.E. and Hartman, W., Strain related electrical potentials recorded in vitro and in vivo, Calcif. Tissue Res., 22, 315, 1977.
36. Baggott, D.G. and Lanyon, L.E., An independent post-mortem calibration of electrical resistance strain gauges bonded to bone surfaces in vivo, J. Biomech., 10, 615, 1977.
37. Carter, D.R., Smith, D.J., Spengler, D.M., et al., Measurement and analysis of in vivo bone strains on the canine radius and ulna, J. Biomech., 13, 27, 1980.
38. Hirsch, C. and Frankel, V., The reaction of the proximal end of the femur to mechanical forces, in Biomechanical Studies of the Musculoskeletal System, Evans, F.G., Ed., Charles C Thomas, Springfield, IL, 1961.
39. Lambert, K.L., The weight-bearing function of the fibula, J. Bone Joint Surg., 53A, 507, 1971.
40. Wright, T.M. and Hayes, W.C., Strain gage application on compact bone, J. Biomech., 12, 471, 1979.
41. Huiskies, R., On the modeling of long bones in structural analysis, J. Biomech., 15, 65, 1982.
42. Gies, A.A. and Carter, D.R., Experimental determination of whole long bone sectional properties, J. Biomech., 15, 297, 1982.
43. Finlay, J.B., Bourne, R.B., and McLean, J.A., Technique for the in vitro measurement of principal strains in the human tibia, J. Biomech., 15, 723, 1982.
44. Kennedy, J.G., Carter, D.R., and Caler, W.E., Long bone torsion, II. A combined experimental and computational method for determining an effective shear modulus, J. Biomech. Eng., 107, 189, 1985.
45. Arner, M. and Hagberg, L., Wrist flexion strength after excision of the pisiform bone, Scand. J. Plast. Reconstr. Surg., 18, 241, 1984.
46. Bourne, R.B., Finlay, J.B., Papadopoulos, P., et al., In vitro strain distribution in the proximal tibia. Effect of varus-valgus loading in the normal and osteoarthritic knee, Clin. Orthop., 188, 285, 1984.
47. Bourne, R.B., Finlay, J.B., Papadopoulos, P., and Andreae, P., The effect of medial menisectomy on strain distribution in the proximal part of the tibia, J. Bone Joint Surg., 66, 1431, 1984.
48. Lanyon, L.E. and Bourn, S., The influence of mechanical function on the development and remodeling of the tibia, J. Bone Joint Surg., 61A(2), 263, 1979.
49. Rubin, C.T. and Lanyon, L.E., Limb mechanics as a function of speed and gait: a study of functional strains in the radius and tibia of horse and dog, J. Exp. Biol., 101, 187, 1982.
50. Rubin, C.T. and Lanyon, L.E., Dynamic strain similarity in vertebrates; an alternative to allometric limb bone scaling, J. Theor. Biol., 107, 321, 1984.
51. Hylander, W.L. and Johnson, K.R., In vivo bone strain patterns in the zygomatic arch of macaques and the significance of these patterns for functional interpretation of craniofacial form, Am. J. Phys. Anthropol., 102, 203, 1997.
52. Carter, D.R., Vasu, R., Spengler, D.M., and Dueland, R.T., Stress fields in the unplated and plated canine femur calculated from in vivo strain measurements, J. Biomech., 14, 63, 1981.
53. Lanyon, L.E., Paul, I.L., Rubin, C.T., et al., In vivo strain measurements from bone and prosthesis following total hip replacement, J. Bone Joint Surg., 63A, 989, 1981.
54. Szivek, J.A., A Quantitative Study of the Effect of Strain Redistribution on Bone Remodelling, Ph.D. thesis, University of Toronto, Canada, 1984.
55. Szivek, J.A., Magee, F.P., Weng, M.S., and Johnson, E.M., Comparative in vivo strain measurement from a two year implanted and unimplanted canine hip, Trans. Int. Soc. Biomater., Kyoto, Japan, 1988.
56. Szivek, J.A., Johnson, E.M., and Magee, F.P., In vivo strain analysis of the greyhound femoral diaphysis, J. Invest. Surg., 5, 91, 1992.
57. Loitz, B.J. and Zernicke, R.F., Strenuous exercise-induced remodeling of mature bone: relationships between in vivo strains and bone mechanics, J. Exp. Biol., 170, 1, 1992.
58. Biewener, A.A. and Bertram, J.E., Skeletal strain patterns in relation to exercise training during growth, J. Exp. Biol., 185, 51, 1993.
59. Biewener, A.A. and Bertram, J.E., Structural response of growing bone to exercise and disuse, J. Appl. Physiol. 76, 946, 1994.
60. Skerry, T.M. and Lanyon, L.E., Interruption of disuse by short duration walking exercise does not prevent bone loss in sheep calcaneous, Bone, 16, 269, 1995.
61. Turner, C.H., Yoshikawa, T., Forwood, M.R., et al., High frequency components of bone strain in dogs measured during various activities, J. Biomech., 28, 39, 1995.
62. Keller, T.S. and Spengler, D.M., In vivo strain gage implantation in rats, J. Biomech., 15, 911, 1982.
63. Szivek, J.A., Wilson, D.L., Anderson, P.L., and DeYoung, D., Development of a model for the study of in vivo bone strains during normal and microgravity environments, J. Appl. Biomater., 6, 203, 1995.
64. Burr, D.B., Milgrom, C., Fyhrie, D., et al., In vivo measurement of human tibial strains during vigorous activity, Bone, 18, 405, 1996.
65. Szivek, J.A., Gealer, R.G., Magee, F.P., and Emmanual, J., Preliminary development of a hydroxyapatite-backed strain gauge, J. Appl. Biomater., 1, 241, 1990.
66. Maliniak, M.M., Szivek, J.A., and DeYoung, D.W., The development of hydroxyapatite coated strain gauges for long-term in vivo bone loading response measurements, J. Appl. Biomater., 4, 143, 1993.
67. Szivek, J.A., Anderson, P.L., and DeYoung, D.W., Evaluation of factors affecting bonding rate of calcium phosphate ceramic coatings for in vivo strain gauge attachment, J. Biomed. Mater. Res., 33, 121, 1996.
68. Szivek, J.A., Anderson, P.L., and DeYoung, D.W., In vivo strain measurements collected using calcium phosphate ceramic bonded strain gauges, J. Invest. Surg., 10, 263, 1997.
69. Battraw, G.A., Szivek, J.A., and Anderson, P.L., Interface strength studies of calcium phosphate ceramic-coated strain gauges, J. Biomed. Mater. Res., 43, 462, 1998.
70. Szivek, J.A., Battraw, G.A., and Anderson, P.L., Calcium phosphate ceramic/polysulfone/polyimide interface characteristics after 4, 6 and 9 months in vivo, Trans. Surf. Biomater., 163, 1998.
71. Beckwith, T.G., Marangoni, R.D., and Lienhard, J.H., Mechanical Measurements, Addison-Wesley, New York, 1993.
72. Dalley, J.W. and Riley, W.F., Experimental Stress Analysis, McGraw-Hill, New York, 1991.
73. Murray, W.M. and Miller, W.R., The Electric Resistance Strain Gauge: An Introduction, Oxford University Press, Oxford, U.K., 1992.
74. BLH Electronics Inc., Catalogue 100-6, Canton, MA, 1998.
75. Perry, C.C., The electric resistance strain gauge revisited, Expl. Mech. 24, 286, 1984.
76. Pople, J., DIY strain gauge transducers, Strain, 16, 23, 1980.
77. Perry, C.C., Strain gauge misalignment errors, Instrum. Control Syst., 42, 137, 1969.
78. Tuttle, M.E. and Brinson, H.F., Resistance foil strain gauge technology as applied to composite mechanics, Expl. Mech., 24, 54, 1984.
79. Malvern, L.E., Introduction to the Mechanics of a Continuous Medium, Prentice-Hall, Englewood Cliffs, NJ, 1969.
80. Hiatt, M.J., In Vivo Strains in Bone near Transcortical Implants, Thesis, Clemson University, Clemson, SC, 1996.
81. Greenberg, S.W., Gonzalez, G., Gurdjian, E.S., and Thomas, L.M., Changes in the physical properties of bone between the in vivo, freshly dead and embalmed conditions, in 12th Stapp Car Crash Conference, Society of Automotive Engineers, New York, 1968, 272.
82. Evans, F.G., The Mechanical Properties of Bone, Charles C Thomas, Springfield, IL, 1973.
83. Broz, J.J., Simske, S.J., Greenberg, A.R., and Luttges, M.W., Effects of rehydration state on the flexural properties of whole mouse long bones, J. Biomech. Eng., 115, 447, 1993.
84. Kersey, R.C., Szivek, J.A., and Sacoman, D.M., Symmetry of biomechanical properties of canine femora, J. Appl. Biomater., 5, 99, 1994.
85. Battraw, G.A., Miera, V., Anderson, P.L., and Szivek, J.A., Symmetry of biomechanical properties in rat femora, J. Biomed. Mater. Res., 32, 285, 1996.
86. Bessman, E.S., Carter, D.R., McCarthy, J.C., and Harris, W.H., Accuracy enhancement of in vivo bone strain measurements and analysis, J. Biomech. Eng., 104, 226, 1982.