Fundamental concepts of earthquake engineering

Fundamental Concepts of Earthquake Engineering

Volumn , Issue , 2009, Pages 1-951

  Villaverde, Roberto ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056954781     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (143)

1. Bolt, B. A., Earthquakes, 5th Edition, W. H. Freeman and Co., New York, 2004, 378 p.
2. Hu, Y. X., Liu, S. C., and Dong, W., Earthquake Engineering, E & FN Spon, London, 1996, 410 p.
3. Lay, T. and Wallace, T. C., Modern Global Seismology, Academic Press, San Diego, 1995, 521 p.
4. Lomnitz, C., Global Tectonics and Earthquake Risk, Elsevier Scientific Publishing Co.
5. New York, 1974, 320 p.
6. Richter, C. F., Elementary Seismology, W. H. Freeman and Co., San Francisco, CA, 1958, 768 p.
7. Bolt, B. A., Earthquakes, 5th edition, W. H. Freeman and Co., New York, 2004, 378 p.
8. Eiby, G. A., Earthquakes, Van Nostrand Reinhold Co., New York, 1980, 209 p.
9. Gere, J. M. and Shah, H. C., Terra Non Firma, W. H. Freeman and Co., New York, 1984, 203 p.
10. Gubbins, D., Seismology and Plate Tectonics, Cambridge University Press, Cambridge, U.K., 1990, 339 p.
11. Hodgson, J. H., Earthquakes and Earth Structure, Prentice-Hall, Englewood Cliffs, NJ, 1964, 166 p.
12. Ikeya, M., Earthquakes and Animals: From Folk Legends to Science, World Scientific Publishing Co., Singapore, 2004, 295 p.
13. Lay, T. and Wallace, T. C., Modern Global Seismology, Academic Press, San Diego, 1995, 521 p.
14. Lomnitz, C., Global Tectonics and Earthquake Risk, Elsevier Scientific Publishing Co., New York, 1974, 320 p.
15. Sieh, K. and LeVay, S., The Earth in Turmoil, W. H. Freeman and Co., New York, 1998, 324 p.
16. Achenbach, J. D., Wave Propagation in Elastic Solids, American Elsevier Pub. Co., New York, 1973.
17. Bullen, K. E. and Bolt, B. A., An Introduction to the Theory of Seismology, 4th Edition, Cambridge University Press, Cambridge, U.K., 1985.
18. Ewing, W. M., Jardestsky, W. S., and Press, F., Elastic Waves in Layered Media, McGraw-Hill, New York, 1957.
19. Kolsky, H., Stress Waves in Solids, Dover Publications, Inc., New York, 1963.
20. Lay, T. and Wallace, T. C., Modern Global Seismology, Academic Press, Inc., San Diego, 1995.
21. Richart, F. E., Hall, J. R., Jr., and Woods, R. D., Vibrations of Soils and Foundations, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1970.
22. Bolt, B. A., Tsai, Y. B., Yeh, K., and Hsu, M. K., Earthquake strong motions recorded by a large near-source array of digital seismographs, Earthquake Engineering and Structural Dynamics, 10, 1982, 561–573.
23. Bolt, B. A., Earthquakes, 5th Edition, W. H. Freeman and Co., New York, 2004, 378 p.
24. Bolt, B. A., Engineering Seismology, Chapter 2 in Earthquake Engineering: From Engineering Seismology to Performance-Based Design, Bozorgnia, Y. and Vertero, V. V., eds., CRC Press LLC, Boca Raton, FL, 2004.
25. Boore, D. M., The motion of the ground in earthquakes, Scientific American, December 1977.
26. Converse, A. M., BAP: Basic Strong Motion Accelerogram Processing Software, Version 1.0, Open-File Report 92-296A, U.S. Geological Survey, U.S. Department of Interior, Denver, CO, 1992.
27. Hodgson, J. H., Earthquakes and Earth Structure, Prentice-Hall, Englewood Cliffs, NJ, 1964, 166 p.
28. Hudson, D. E., Reading and Interpreting Strong Motion Accelerograms, Earthquake Engineering Research Institute, Oakland, CA, 1979, 112 p.
29. Lay, T. and Wallace, T. C., Modern Global Seismology, Academic Press, San Diego, 1995, 517 p.
30. Medvedev, S. V. and Sponheuer, W., Scale of seismic intensity, Proceedings of the 4th World Conference on Earthquake Engineering, 1, 2 143–153, Asociación Chilena de Sismología e Ingeniería Antisismica, Santiago, Chile, 1969.
31. Nagata, S., Katayama, T., Yamazaki, F., Lu, L., and Turker, T., A dense seismograph array in Chiba, Japan and its strong motion database, Proceedings of 4th U.S. National Conference on Earthquake Engineering, 1, 357–366, Earthquake Engineering Research Institute, Oakland, CA, 1990.
32. Okamoto, S., Introduction to Earthquake Engineering, 2nd Edition, University of Tokyo Press, Tokyo, 1984, 629 p.
33. Porcella, R. and Matthiesen, R., Strong Motion Records, Oct. 15, 1979 Imperial Valley Earthquake, USGS Open-File Report 79-1654, 1979, 42 p.
34. Kramer, S. L., Geotechnical Earthquake Engineering, Prentice-Hall, Inc., Upper Saddle River, NJ, 1996, 653 p.
35. Humar, J. L., Dynamics of Structures, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1990, 780 p.
36. Mohraz, B. and Sadek, F., Earthquake ground motion and response spectra, Chapter 2 in The Seismic Design Handbook, 2nd edition, Naeim, F. ed., Kluwer Academic Publishers, Boston, MA, 2001, pp. 47–124.
37. Nau, J. M., Computation of inelastic response spectra, Journal of Engineering Mechanics, ASCE, 109, 1, February 1983, 279–288.
38. Newland, D. E., An Introduction to Random Vibrations and Spectral Analysis, Longman Group Ltd., London, 1975, 285 p.
39. Newmark, N. M. and Hall, W. J., Earthquake Spectra and Design, Earthquake Engineering Research Institute, Oakland, CA, 1989, 103 p.
40. Nigam, N. C. and Jennings, P. C., Calculation of response spectra from strong-motion earthquake records, Bulletin Seismological Society of America, 59, 1969, 909–922.
41. Paz, M. and Leigh, W., Structural Dynamics: Theory and Computation, 5th edition, Kluwer Academic Publishers, Boston, MA, 2004, 812 p.
42. Uang, C. M. and Bertero, V. V., Implications of Recorded Earthquake Ground Motions on Seismic Design of Building Structures, Report No. UCB/EERC-88/13, University of California, Berkeley, CA, November 1988.
43. Abrahamson, N. A. and Shedlock, K. M., Overview, Seismological Research Letters, 68(1), 1997, pp. 9–23.
44. Idriss, I. M., Evaluating seismic risk in engineering practice, Proceedings of 11th International Conference on Soil Mechanics and Foundation Engineering, San Francisco, CA, August 12–16, 1985, Vol. 1, pp. 255–320.
45. McGuire, R. K., Seismic Hazard and Risk Analysis, Monograph MNO-10, Earthquake Engineering Research Institute, Oakland, CA, 2004, 221 p.
46. McGuire, R. K. and Arabasz, W. J., An introduction to probabilistic seismic hazard analysis, in Geotechnical and Environmental Geophysics, Ward, S. H. ed., Society of Exploration Geophysicists, 1990, 1, pp. 333–353.
47. Reiter, L., Earthquake Hazard Analysis—Issues and Insights, Columbia University Press, New York, 1990, 254 p.
48. Schwartz, D. P. and Coppersmith, K. J., Seismic hazards: New trends in analysis using geological data, in Active Tectonics, Wallace, R. E. ed., Academic Press, Orlando, FL, 1986, pp. 215–230.
49. Schwartz, D. P., Geologic characterization of seismic sources: Moving into the 1990s, Earthquake Engineering and Soil Dynamics II: Recent Advances in Ground Motion Evaluation, Geotechnical Special Publication 20, ASCE, New York, 1988, pp. 1–42.
50. Wells, D. L. and Coppersmith, K. J., New empirical relationships among magnitude, rupture length, rupture width, rupture area, and surface displacement, Bulletin Seismological Society of America, 84, 4, 1994, pp. 974–1002.
51. Davis, L. L. and West, L. R., Observed effects of topography on ground motion, Bulletin of the Seismological Society of America, 63, 1973, 283–298.
52. Field, E. H., Kramer, S., Elgamal, A. W. et al., Nonlinear site response: Where we are at (A report from a SCEC/PEER seminar and workshop), Seismological Research Letters, 69, 3, 1998, 230–234.
53. Geli, L., Bard, P., and Jullien, B., The effect of topography on earthquake ground motion:A review and new results, Bulletin of the Seismological Society of America, 78, 1, 1988, 42–63.
54. Hardin, B. O. and Drnevich, V. P., Shear modulus and damping in soils: Design equations and curves, Journal of the Soil Mechanics and Foundations Division, ASCE, 98, SM7, 1972, 667–692.
55. Ishihara, K., Soil Behaviour in Earthquake Geotechnics, Oxford University Press, New York, 1996.
56. Jibson, R., Summary of Research on the Effects of Topographic Amplification of Earthquake Shaking on Slope Stability, Open-File Report 87-268, U.S. Geological Survey, 1987.
57. Kramer, S. L., Geotechnical Earthquake Engineering, Prentice-Hall, Upper Saddle River, NJ, 1996.
58. Roesset, J. M., Fundamentals of soil amplification, in Seismic Design for Nuclear Power Plants, Hansen, R. J. ed., The MIT Press, Cambridge, MA, 1970, pp. 183–244.
59. Schnabel, P. B., Lysmer, J., and Seed, H. B., SHAKE, A Computer Program for Earthquake Response Analysis of Horizontally Layered Sites, Report No. EERC 72-12, University of California, Berkeley, CA, 1972.
60. Seed, H. B. and Idriss, I. M., Ground Motion and Soil Liquefaction during Earthquakes, Earthquake Engineering Research Institute, Oakland, CA, 1982.
61. Seed, H. B. and Idriss, I. M., Soil Moduli and Damping Ratios for Dynamic Response Analyses, Report No. EERC 70-10, Earthquake Engineering Research Center, University of California, Berkeley, CA, 1970.
62. Seed, H. B., Wong, R. T., Idriss, I. M., and Tokimatsu, K., Moduli and damping factors for dynamic analyses of cohesionless soils, Journal of Geotechnical Engineering, ASCE, 112, 11, 1986, 1016–1032.
63. Vucetic, M. and Dobry, R., Effect of soil plasticity on cyclic response, Journal of Geotechnical Engineering, ASCE, 117, 1, 1991, 89–107.
64. Dunbar, W. S. and Charlwood, R. G., Empirical methods for the prediction of response spectra, Earthquake Spectra, 7, 3, 1991, 333–353.
65. Miranda, E. and Bertero, V. V., Evaluation of strength reduction factors for earthquake-resistant design, Earthquake Spectra, 10, 2, 1994, 357–379.
66. Mohraz, B., A study of earthquake response spectra for different geological conditions, Bulletin of the Seismological Society of America, 66, 1976, 915–935.
67. Mohraz, B. and Sadek, F., Earthquake ground motion and response spectra, Chapter 2 in The Seismic Design Handbook, 2nd Edition, Naeim, F. ed., Kluwer Academic Publishers, Boston, MA, 2001.
68. Newmark, N. M. and Hall, W. J., Earthquake Spectra and Design, Earthquake Engineering Research Institute, Oakland, CA, 1982.
69. Riddell, R. and Newmark, N. M., Statistical Analysis of the Response of Nonlinear Systems Subjected to Earthquakes, Structural Research Series No. 468, Department of Civil Engineering, University of Illinois, Urbana, IL, 1979.
70. Seed, H. B. and Idriss, I. M., Ground Motion and Soil Liquefaction during Earthquakes, Earthquake Engineering Research Institute, Oakland, CA, 1982.
71. Cheng, F. Y., Matrix Analysis of Structural Dynamics: Applications and Earthquake Engineering, Marcel Dekker, Inc., New York, 2001, 997 p.
72. Chopra, A. K., Dynamics of Structures: Theory and Applications to Earthquake Engineering, 2nd Edition, Prentice-Hall, Inc., Upper Saddle River, NJ, 2001, 844 p.
73. Der Kiureghian, A., Structural response to stationary excitation, Journal of Engineering Mechanics, ASCE, 106, EM6, 1980, 1195–1213.
74. Der Kiureghian, A. and Neuenhofer, A., Response spectrum method for multiple-support seismic excitations, Earthquake Engineering and Structural Dynamics, 21, 8, 1992, 713–740.
75. Ghafory-Ashtiany, M. and Singh, M. P., Structural response for six correlated earthquake components, Earthquake Engineering and Structural Dynamics, 14, 1, 1986, 103–119.
76. Harichandran, R. S. and Vanmarcke, E. H., Stochastic variation of earthquake ground motion in space and time, Journal of Engineering Mechanics, ASCE, 112, 2, 1986, 154–174.
77. Hart, G. C. and Vasudevan, R., Earthquake design of buildings: Damping, Journal of the Structural Division, ASCE, 101, ST1, 1975, 11–30.
78. Hart, G. C. and Wong, K., Structural Dynamics for Structural Engineers, John Wiley & Sons, Inc., New York, 2000, 591 p.
79. Haviland, R., A Study of the Uncertainties in the Fundamental Translation Periods and Damping Values for Real Buildings, Report No. PB-253, Massachusetts Institute of Technology, 1976.
80. Jeary, A. P., Damping in tall buildings—A mechanism and a predictor, Earthquake Engineering and Structural Dynamics, 14, 5, 1986, 733–750.
81. López, O. A. and Torres, R., The critical angle of seismic incidence and the maximum structural response, Earthquake Engineering and Structural Dynamics, 26, 9, 1997, 881–894.
82. Price, T. E. and Eberhard, M. O., Effects of spatially varying ground motions on short bridges, Journal of Structural Engineering, ASCE, 124, 8, 1998, 948–955.
83. Rosenblueth, E. and Elourdy, J., Response of linear systems in certain disturbances, Proceedings of Fourth World Conference on Earthquake Engineering, A-1, Santiago, Chile, 1969, pp. 185–196.
84. Singh, M. P. and Maldonado, G. O., An improved response spectrum method for calculating seismic design response. Part I: Classically damped structures, Earthquake Engineering and Structural Dynamics, 20, 7, 1991, 621–635.
85. Smeby, W. and Der Kiureghian, A., Modal combination rules for multicomponent earthquake excitation, Earthquake Engineering and Structural Dynamics, 13, 1, 1985, 1–12.
86. Adeli, H., Gere, J. M., and Weaver, W., Jr., Algorithms for nonlinear structural dynamics, Journal of the Structural Engineering Division, ASCE, 104, ST2, February 1978, 263–280.
87. Bathe, K. J. and Wilson, E. L., Stability and accuracy analysis of direct integration methods, Earthquake Engineering and Structural Dynamics, 1, 1973, 283–291.
88. Bathe, K. J., Finite Element Procedures in Engineering Analysis, Prentice-Hall, Englewood Cliffs, NJ, 1982.
89. Cheng, F. Y., Matrix Analysis of Structural Dynamics: Applications and Earthquake Engineering, Marcel Dekker, New York, 2001.
90. Chopra, A. K., Dynamics of Structures: Theory and Applications to Earthquake Engineering, 2nd Edition, Prentice-Hall, Upper Saddle River, NJ, 2001.
91. Collatz, L., The Numerical Treatment of Differential Equations, Springer-Verlag, New York, 1966.
92. Goudreau, G. L. and Taylor, R. L., Evaluation of numerical integration methods in elastodynamics, Computer Methods in Applied Mechanics and Engineering, 2, 1, 1973, 69–97.
93. Hart, G. C. and Wong, K., Structural Dynamics for Structural Engineers, Wiley, New York, 2000.
94. Hilber, H. H. and Hughes, T. J. R., Collocation, dissipation, and overshoot for time integration schemes in structural dynamics, Earthquake Engineering and Structural Dynamics, 6, 1, 1978, 99–117.
95. Humar, J. L., Dynamics of Structures, Prentice-Hall, Englewood Cliffs, NJ, 1990.
96. Newmark, N. M., A method of computation for structural dynamics, Journal of the Engineering Mechanics Division, ASCE, 85, EM3, 1959, 67–94.
97. Nickel, R. E., On the stability of approximation operators in problems of structural dynamics, International Journal of Solids Structures, 7, 1971, 301–319.
98. Wilson, E. L., Farhoomand, I., and Bathe, K. J., Nonlinear dynamic analysis of complex structures, Earthquake Engineering and Structural Dynamics, 1, 1973, 241–252.
99. Anderson, A. W., Blume, J. A., Degenkolb, H. B., Hammill, H. B., Knapik, E. M., Marchand, H. L., Powers, H. C., Rinne, J. E., Sedgwick, G. A., and Sjoberg, H. O., Lateral forces of earthquake and wind, Transactions ASCE, 117, 1952, 716–754.
100. Chopra, A. K., Dynamics of Structures: Theory and Applications to Earthquake Engineering, 2nd Edition, Chapter 21, Prentice-Hall, Upper Saddle River, NJ, 2001, pp. 755–782.
101. Chopra, A. K. and Newmark, N. M., Analysis, Chapter 2 in Design of Earthquake Resistant Structures, Rosenblueth, E. ed., Pentech Press, London, 1980, pp. 27–53.
102. Federal Emergency Management Agency, Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Publication No. 356, Prepared by the American Society of Civil Engineers for the Federal Emergency Management Agency, Washington, DC, 2000.
103. Newmark, N. M. and Rosenblueth, E., Fundamentals of Earthquake Engineering, Chapter 15, Prentice-Hall, Englewoods Cliffs, NJ, 1971, pp. 477–530.
104. Ad-Hoc Group on Soil–Structure Interaction of the Committee on Nuclear Structures and Materials of the Structural Division of ASCE, Analyses for Soil–Structure Interaction Effects in the Seismic Analysis for Nuclear Power Plants, American Society of Civil Engineers, New York, 1979, 155 p.
105. Das, B. M., Principles of Soil Dynamics, PWS-Kent Publishing Co., Boston, MA, 1993, 570 p.
106. Gazetas, G., Analysis of machine foundation vibrations: state of the art, Soil Dynamics and Earthquake Engineering, 2, 1, 1983, 2–42.
107. Gazetas, G., Formulas and charts for impedance of surface and embedded foundations, Journal of Geotechnical Engineering, ASCE, 117, 1991, 1363–1381.
108. Hadjian, A. H., The learning from the large scale Lotung soil–structure interaction experiments, Proceedings 2nd International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, Vol. 3, St. Louis, MO, March 11–15, 1991, pp. 2047–2070.
109. Lysmer, J., Udaka, T., Tsai, C.F., and Seed, H. B., FLUSH: A Computer Program for Approximate 3-D Analysis of Soil–Structure Interaction Problems, Report No. EERC 75-30, University of California, Berkeley, CA, Nov. 1975.
110. Lysmer, J., Ostadan, F., Tabatabaie, M., Vahdani, S., and Tajirian, F., SASSI—A System for Analysis of Soil–Structure Interaction, Department of Civil Engineering, University of California, Berkeley, CA, and Bechtel Power Corporation, San Francisco, CA, July 1998.
111. Luco, J. E., Linear Soil–Structure Interaction (description of CLASSI computer program), Report UCRL-15272, Lawrence Livermore National Laboratory, Livermore, CA, 1980.
112. Lysmer, J., Analytical procedures in soil dynamics, Proceedings ASCE Geotechnical Engineering Division Specialty Conference on Earthquake Engineering and Soil Dynamics, Vol. 3, June 19–21, 1978, pp. 1267–1313.
113. Novak, M., Sheta, M., El-Hifnawy, L., El-Marsafawi, H., and Ramadan, O., DYNA4: A Computer Program for Calculation of Foundation Response to Dynamic Loads, Report GEOP 93-01, Geotechnical Research Center, The University of Western Ontario, London, Ontario, 1993.
114. Chen, Y. and Soong, T. T., State-of-the-art-review: Seismic response of secondary systems, Engineering Structures, 10, 1988, 218–228.
115. Gupta, A. K., Response Spectrum Method in Seismic Analysis and Design of Structures, Blackwell, Boston, MA, 1990.
116. Sankaranarayanan, R. and Medina, R. A., Acceleration response modification factors for nonstructural components attached to inelastic moment-resisting frame structures, Earthquake Engineering and Structural Dynamics, 36, 14, 2007, 2189–2210.
117. Singh, M. P., An overview of techniques for analysis of non-structural components, Proceedings ATC-29 Seminar and Workshop on Seismic Design and Performance of Equipment and Nonstructural Components in Buildings and Industrial Structures, Irvine, CA, Oct. 3–5, 1990, pp. 215–224.
118. Soong, T. T., Seismic behavior of nonstructural elements—State-of-the-art report, Proceedings 10th European Conference on Earthquake Engineering, Vol. 3, Vienna, Austria, Aug. 28–Sept. 2, 1994, pp. 1599–1606.
119. Villaverde, R., Earthquake resistant design of nonstructural elements: State of the art, Journal of Structural Engineering, ASCE, 123, 8, 1997, 1011–1019.
120. Chaudhury, S. R. and Villaverde, R., Effect of building nonlinearity on seismic response of nonstructural components: A parametric study, Journal of Structural Engineering, ASCE, 134, 4, 2008, 661–670.
121. Buckle, I. G. and Mayes, R. L., Seismic isolation: History, application, and performance—A world view, Earthquake Spectra, 6, 2, 1990, 161–201.
122. Hurty, W. C. and Rubinstein, M. F., Dynamics of Structures, Prentice-Hall, Englewood Cliffs, NJ, 1964, 455 p.
123. Izumi, M., Base isolation and passive seismic response control, Proceedings 9th World Conference on Earthquake Engineering, Vol. VIII, Tokyo, Japan, 1988, pp. 385–396.
124. Kelly, J. M., Earthquake-Resistant Design with Rubber, 2nd Edition, Springer, London, 1997, 243 p.
125. Komodromos, P., Seismic Isolation for Earthquake Resistant Structures, WIT Press, Southampton, 2000, 201 p.
126. Hanson, R. D. and Soong, T. T., Seismic Design with Supplemental Energy Devices, Monograph MNO-8, Earthquake Engineering Research Institute, Oakland, CA, 2001, 135 p.
127. Hanson, R. D., ed., Passive energy dissipation, theme issue, Earthquake Spectra, 9, 3, 1993, 319–641.
128. Hart, G. C. and Wong, K., Structural Dynamics for Structural Engineers, John Wiley & Sons, New York, 2000, 591 p.
129. Pall, A. S. and Pall, R. T., Performance-based design using pall friction dampers—An economical design solution, Paper No. 1955, Proceedings of 13th World Conference on Earthquake Engineering, Vancouver, Canada, 2004.
130. Soong, T. T. and Constantinou, M. C., ed., Passive and Active Structural Control in Civil Engineering, CIMS Courses and Lectures No. 345, Springer, Vienna, NY, 1994, 380p.
131. Soong, T. T. and Dargush, G. F., Passive Energy Dissipation Systems in Structural Engineering, John Wiley & Sons, Chichester, England, 1997, 356 p.
132. Soong, T. T. and Spencer, B. F., Jr., Supplemental energy dissipation: State of the art and state of the practice, Engineering Structures, 24, 3, 2002, 243–259.
133. Special Scientific Events Subcommittee of the Executive Committee for the 11th International Conference for Structural Mechanics in Reactor Technology, Seismic Isolation and Response Control for Nuclear and Non-Nuclear Structures, Tokyo, Japan, 1991.
134. Taylor, D. P., History, design, and applications of fluid dampers in structural engineering, http://www.taylordevices.com/papers/history.design.htm.
135. Uang, C. M. and Nakashima, M., Steel buckling-restrained braced frames, Chapter 16 in Earthquake Engineering: From Engineering Seismology to Performance-Based Design, Bozorgnia, Y. and Bertero, V. V., ed., CRC Press, Boca Raton, FL, 2004.
136. Building Seismic Safety Council, NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures (FEMA 450), 2003 Edition, Part 1: Provisions, Washington, DC, 2004, available at www.bssconline.org.
137. Building Seismic Safety Council, NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures (FEMA 450), 2003 Edition, Part 2: Commentary, Washington, DC, 2004, available at www.bssconline.org.
138. Tri-Services Manual: Seismic Design of Buildings, Departments of the Army (TM 5-809-10), Navy (NAVFAC 355), and Air Force (AFM 88-3), Washington, DC, 1992.
139. American Society of Civil Engineers, Minimum Design Loads for Buildings and Other Structures, ASCE/SEI 7-05, Reston, VA, 2006.
140. International Code Council, Inc., International Building Code, 2006.
141. Berg, G. V., Seismic Design Codes and Procedures, Monograph MNO-6, Earthquake Engineering Research Institute, Oakland, CA, 1983.
142. Applied Technology Council, Tentative Provisions for the Development of Seismic Regulations for Buildings, ATC 3-06, National Bureau of Standards, Special Publication 510, U.S. Government Printing Office, Washington, DC, 1978.
143. Seismological Committee, Recommended Lateral Force Requirements and Commentary, Structural Engineers Association of California, Sacramento, CA, 1999.