Adhesion measurement methods: Theory and practice

Adhesion Measurement Methods: Theory and Practice

Volumn , Issue , 2005, Pages 1-428

  Lacombe, Robert H ^a  

^a MST Conferences   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056420853     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (188)

1. Mittal, K.L. Adhesion Measurement: Recent Progress, Unsolved Problems, and Prospects, in Adhesion Measurement of Thin Films, Thick Films, and Bulk Coatings, ASTM STP-640 (K.L. Mittal, Ed.), American Society for Testing and Materials, Philadelphia, PA, 1978, pp. 5-17.
2. B. Friedrich and D. Herschbach, Physics Today, 53 (December 2003).
3. “Adhesion Measurement of Films and Coatings: A Commentary,” K.L. Mittal, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 1.
4. “An Experimental Partitioning of the Mechanical Energy Expended During Peel Testing,” R.J. Farris and J.L. Goldfarb, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 265.
5. “Peel Adhesion and Pressure Sensitive Tapes,” D. Satas and F. Egan, Adhesives Age, 22 (August 1966).
6. “Failure Mechanisms in Peeling of Pressure-Sensitive Adhesive Tape,” D.W. Aubrey, G.N. Welding, and T. Wong, Journal of Applied Polymer Science, 13, 2193 (1969).
7. G.V. Calder, F.C. Hansen, and A. Parra, in Adhesion Aspects of Polymeric Coatings, K.L. Mittal, Ed. (Plenum Press, New York, 1983), p. 569.
8. G.V. Calder, F.C. Hansen, and A. Parra, in Adhesion Aspects of Polymeric Coatings, K.L. Mittal, Ed. (Plenum Press, New York, 1983), p. 570.
9. “Salt Bath Test for Assessing the Adhesion of Silver to Poly(ethylene terephthalate) Web,” J.M. Grace, V. Botticelle, D. R. Freeman, W. Kosel, and R.G. Spahn, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 423.
10. “Pull-off Test, an Internationally Standardized Method for Adhesion Testing -Assessment of the Relevance of Test Results,” J. Sickfeld, in Adhesion Aspects of Polymeric Coatings, K.L. Mittal, Ed. (Plenum Press, New York, 1983), p. 543.
11. “Analysis of Pull Tests for Determining the Effects of Ion Implantation on the Adhesion of Iron Films to Sapphire Substrates,” J.E. Pawel and C.J. McHargue, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 323.
12. “Measurement of the Adhesion of Diamond Films on Tungsten and Correlations with Processing Parameters,” M. Alam, D.E. Peebles, and J.A. Ohlhausen, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 331.
13. P.A. Engel and G.C. Pedroza, in Adhesion Aspects of Polymeric Coatings, K.L. Mittal, Ed. (Plenum Press, New York, 1983), p. 583.
14. P.A. Engel and G.C. Pedroza, in Adhesion Aspects of Polymeric Coatings, K.L. Mittal, Ed. (Plenum Press, New York, 1983), p. 588.
15. “Mechanics of the Indentation Test and Its Use to Assess the Adhesion of Polymeric Coatings,” R. Jayachandran, M.C. Boyce, and A.S. Argon, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 189.
16. “Observations and Simple Fracture Mechanics Analysis of Indentation Fracture Delamination of TiN Films on Silicon,” E.R. Weppelmann, X.-Z. Hu, and M.V. Swain, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 217.
17. “Hardness and Adhesion of Filmed Structures as Determined by the Scratch Technique,” J. Ahn, K.L. Mittal and R.H. MacQueen, in Adhesion Measurement of Thin Films, Thick Films and Bulk Coatings, ASTM STP 640, K.L. Mittal, Ed. (American Society for Testing and Materials, West Conshohocken, PA, 1978), p. 134.
18. “Some Factors Influencing the Adhesion of Films Produced by Vacuum Evaporation,” O.S. Heavens, Journal of the Physics of Radium, 11, 355 (1950).
19. “L’epitaxie dans les Lames Polycrystallines,” O.S. Heavens and L.E. Collins, Journal of the Physics of Radium, 13, 658 (1952).
20. “Measurement of Adhesion of Thin Film,” P. Benjamin and C. Weaver, Proceedings of the Royal Society (London), 254A, 163 (1960).
21. “The Stylus or Scratch Method for Thin Film Adhesion Measurement: Some Observations and Comments,” D.W. Butler, C.J.H. Stoddard, and P.R. Stuart, Journal of Physics (D): Applied Physics, 3, 887 (1970).
22. “Threshold Adhesion Failure: An Approach to Aluminum Thin-Film Adhesion Measurement Using the Stylus Method,” J. Oroshnik and W.K. Croll, in Adhesion Measurement of Thin Films, Thick Films and Bulk Coatings, ASTM STP 640, K.L. Mittal, Ed. (American Society for Testing and Materials, West Conshohocken, PA, 1978), p. 158.
23. “Scratch Indentation, a Simple Adhesion Test Method for Thin Films on Polymeric Supports,” G.D. Vaughn, B.G. Frushour, and W.C. Dale, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 127.
24. “Micro-scratch Test for Adhesion Evaluation of Thin Films,” V.K. Sarin, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 175.
25. “Can the Scratch Adhesion Test Ever Be Quantitative?" S.J. Bull, in Adhesion Measurement of Films and Coatings, Vol. 2, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 2001), p. 107.
26. “Scratch Test Failure Modes and Performance of Organic Coatings for Marine Applications,” S.J. Bull, K. Horvathova, L.P. Gilbert, D. Mitchell, R.I. Davidson, and J.R. White, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 175.
27. “Measurement of Adhesion by a Blister Method,” H. Dannenberg, Journal of Applied Polymer Science, 5, 125 (1961).
28. “A Study of the Fracture Efficiency Parameter of Blister Tests for Films and Coatings,” Y.-H. Lai and D.A. Dillard, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 231.
29. “Analysis of Critical Debonding Pressures of Stressed Thin Films in the Blister Test,” M.G. Allen and S.D. Senturia, Journal of Adhesion, 25, 303 (1988).
30. M.G. Allen and S.D. Senturia, Journal of Adhesion, 29, 219 (1989).
31. M.J. Napolitano, A. Chudnovsky, and A. Moet, Proceedings of ACS, Division of Polymer Material Science and Engineering, 57, 755 (1987).
32. “The Constrained Blister Test for the Energy of Interfacial Adhesion,” M.J. Napolitano, A. Chudnovsky, and A. Moet, Journal of Adhesion Science and Technology, 2, 311 (1988).
33. “The Constrained Blister -A Nearly Constant Strain Energy Release Rate Test for Adhesives,” Y.S. Chang, Y.H. Lai, and D.A. Dillard, Journal of Adhesion, 27, 197 (1989).
34. “An Elementary Plate Theory Prediction for Strain Energy Release Rate of the Constrained Blister Test,” Y.H. Lai and D.A. Dillard, Journal of Adhesion, 31, 177 (1990).
35. “Numerical Analysis of the Constrained Blister Test,” Y.H. Lai and D.A. Dillard, Journal of Adhesion, 33, 63 (1990).
36. “Adhesion (Fracture Energy) of Electropolymerized Poly(n-octyl maleimide-co-styrene) on Copper Substrates Using a Constrained Blister Test,” J.-L. Liang, J.P. Bell, and A. Mehta, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 249.
37. N.T. McDevitt and W.L. Braun, in Adhesive Joints: Formation, Characteristics and Testing, K.L. Mittal, Ed. (Plenum Press, New York, 1984), p. 381.
38. “Practical Adhesion Measurement in Adhering Systems: A Phase Boundary Sensitive Test,” A.A. Roche, M.J. Romand, and F. Sidoroff, in Adhesive Joints: Formation, Characteristics and Testing, K.L. Mittal, Ed. (Plenum Press, New York, 1984), p. 19.
39. “Interface Adhesion: Measurement and Analysis,” A.G. Evans, in Adhesion Measurement of Films and Coatings, Vol. 2, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 2001), p. 1.
40. “Use of Fracture Mechanics Concepts in Testing of Film Adhesion,” W.D. Bascom, P.F. Becher, J.L. Bitner, and J.S. Murday, in Adhesion Measurement of Thin Films, Thick Films and Bulk Coatings, ASTM STP 640, K.L. Mittal, Ed. (American Society for Testing and Materials, West Conshohocken, PA, 1978), p. 63.
41. “Fracture Design Criteria for Structural Adhesive Bonding -Promise and Problems,” W.D. Bascom, R.L. Cottington, and C.O. Timmons, Naval Engineers Journal, 73 (August 1976).
42. “Mixed Mode Cracking in Layered Materials,” J.W. Hutchinson and Z. Suo, Advances in Applied Mechanics, 29, 63 (1991).
43. “Closure and Repropagation of Healed Cracks in Silicate Glass,” T.A. Michalske and E.R. Fuller Jr., Journal of the American Ceramics Society, 68, 586 (1985).
44. “Combined Mode Fracture via the Cracked Brazilian Disk Test,” C. Atkinson, R.E. Smelser, and J. Sanchez, International Journal of Fracture, 18, 279 (1982).
45. “Experimental Determination of Interfacial Toughness Using Brazil-Nut-Sandwich,” J.S. Wang and Z. Suo, Acta Met., 38, 1279 (1990).
46. “Fracture Toughness Curves for Epoxy Molding Compound/Leadframe Interfaces,” H.-Y. Lee, Journal of Adhesion Science and Technology, 16, 565 (2002).
47. “Adhesion and Adhesives Technology,” A.V. Pocius (Carl Hanser Verlag, Munich, 2002), p. 186.
48. “The Role of Interfacial Interactions and Loss Function of Model Adhesives on Their Adhesion to Glass,” A Sharif, N. Mohammadi, M. Nekoomanesh, and Y. Jahani, Journal of Adhesion Science and Technology, 16, 33 (2002).
49. “Plasma Sprayed Coatings as Surface Treatments of Aluminum and Titanium Adherends,” G.D. Davis, P.L. Whisnant, D.K. Shaffer, G.B. Groff, and J.D. Venables, Journal of Adhesion Science and Technology, 9, 527 (1995).
50. “Effectiveness of Water Borne Primers for Structural Adhesive Bonding of Aluminum and Aluminum-Lithium Surfaces,” K.L. Meyler and J.A. Brescia, Journal of Adhesion Science and Technology, 9, 81 (1995).
51. J. Cognard, Journal of Adhesion, 22, 97 (1987).
52. M.F. Kauninen, International Journal of Fracture, 9, 83 (1973).
53. H.R. Brown, Journal of Material Science, 25, 2791 (1990).
54. “Strength of Polystyrene Poly(Methyl Methacrylate) Interfaces,” K.L. Foster and R.P. Wool, Macromolecules, 24(6), 1397 (1991).
55. “On the Non-linear Elastic Stresses in an Adhesively Bonded T-Joint With Double Support,” M.K. Apalak, Journal of Adhesion Science and Technology, 16, 459 (2002).
56. “A Simple Film Adhesion Comparator,” D.W. Butler, Journal of Physics (E): Science of Instrumentation, 3, 979 (1970).
57. “Measurement of the Adhesion of Silver Films to Glass Substrates,” A. Kikuchi, S. Baba, and A. Kinbara, Thin Solid Films, 124, 343 (1985).
58. “A Self-Delamination Method of Measuring the Surface Energy of Adhesion of Coatings,” R.J. Farris and C.L. Bauer, Journal of Adhesion, 26, 293 (1988).
59. “Measurement of Interfacial Fracture Energy in Microelectronic Multifilm Applications,” J.C. Hay, E. Lininger, and X.H. Liu, in Adhesion Measurement of films and Coatings, Vol. 2, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 2001), p. 205.
60. A. Bagchi, G.E. Lucas, Z. Suo, and A.G. Evans, J. Mater. Res., 9(7), 1734 (1994);
61. “Thin Film Decohesion and its Measurement,” A. Bagchi and A.G. Evans, Mat. Res. Soc. Symp. Proc., 383, 183 (1995);
62. “The Mechanics and Physics of Thin Film Decohesion and its Measurement,” A. Bagchi and A.G. Evans, Interface Science, 3, 169 (1996).
63. “Interface Adhesion: Measurement and Analysis,” A.G. Evans, in Adhesion Measurement of Films and Coatings, Vol. 2, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 2001), p. 9.
64. “Measurement of Film-Substrate Bond Strength by Laser Spallation,” J.L. Vossen, in Adhesion Measurement of Thin Films, Thick Films and Bulk Coatings, ASTM STP 640, K.L. Mittal, Ed. (American Society for Testing and Materials, West Conshohocken, PA, 1978), p. 122.
65. “Measurement of Interfacial Bond Strength by Laser Spallation,” A.W. Stephens and J.L. Vossen, Journal of Vacuum Science and Technology, 13, 38 (1976).
66. V. Gupta, J. Yuan, and A. Pronin, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 367.
67. V. Gupta, J. Yuan, and A. Pronin, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 395.
68. “Effect of Primer Curing Conditions on Basecoat-Primer Adhesion -A LIDS Study,” J.S. Meth, in Adhesion Measurement of Films and Coatings, Vol. 2, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 2001), p. 255.
69. “Electromagnetic Tensile Adhesion Test Method,” S. Krongelb, in Adhesion Measurement of Thin Films, Thick Films and Bulk Coatings, ASTM STP 640, K.L. Mittal, Ed. (American Society for Testing and Materials, West Conshohocken, PA, 1978), p. 107.
70. “Adhesion of Aluminum Films on Polyimide by the Electromagnetic Tensile Test,” B.P. Baranski and J.H. Nevin, Journal of Electronic Material, 16, 39 (1987).
71. “Nondestructive Dynamic Evaluation of Thin NiTi Film Adhesion,” Q. Su, S.Z. Hua, and M. Wuttig, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 357.
72. “Vibrating Reed Internal Friction Apparatus for Films and Foils,” B.S. Berry and W.C. Pritchet, IBM Journal of Research and Development, 19, 334 (1975).
73. “Mechanical Properties of Thin Polyimide Films,” R.H. Lacombe and J. Greenblatt, in Polyimides, Vol. 2, K.L. Mittal, Ed. (Plenum, New York, 1984), p. 647.
74. “Testing the Adhesion of Hard Coatings Including the Non-destructive Technique of Surface Acoustic Waves,” H. Ollendorf, T. Schülke, and D. Schneider, in Adhesion Measurement of Films and Coatings, Vol. 2, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 2001), p. 49.
75. “Adhesive Joint Characterization by Ultrasonic Surface and Interface Waves,” S.I. Rokhlin, in Adhesive Joints: Formation, Characterization and Testing, K.L. Mittal, Ed. (Plenum Press, New York, 1984), p. 307.
76. “Adhesion Studies of Polyimide Films Using a Surface Acoustic Wave Sensor,” D.W. Galipeau, J.F. Vetelino, and C. Feger, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 411.
77. “The Linear Theory of Elasticity,” M.E. Gurtin, in Mechanics of Solids, Vol. 2, C. Truesdell, Ed. (Springer-Verlag, Heidelberg, Germany, 1984).
78. “Introduction to Linear Elasticity,” P.L. Gould (Springer-Verlag, New York, 1983), Chapter 4.
79. Strength of Materials, J.P. Den Hartog (Dover, New York, 1961; first published by McGraw-Hill, 1949).
80. History of Strength of Materials, S.P. Timoshenko (Dover, New York, 1983; first published by McGraw-Hill, 1953).
81. Roark’s Formulas for Stress and Strain, 6th ed., W.C. Young (McGraw-Hill, New York, 1989).
82. Theory of Elasticity, 3rd ed., S.P. Timoshenko and J.N. Goodier (McGraw-Hill, New York, 1970)
83. The Feynman Lectures on Physics, Vol. 2, R.P. Feynman, R.B. Leighton, and M. Sands (Addison-Wesley, Reading, MA, 1964)
84. “Thermal Stresses in a Rectangular Plate Clamped Along an Edge,” B.J. Aleck, Journal of Applied Mechanics, 16, 118 (1949).
85. Introduction to Solid State Physics, 2nd ed., C. Kittel (John Wiley and Sons, New York, 1956).
86. “A Continuum Theory of Lattice Defects,” J.D. Eshelby, in Solid State Physics: Advances in Research and Applications, Vol. 3, F. Seitz and D. Turnbull, Eds. (Academic Press, New York, 1956), p. 79.
87. “The Energy Momentum Tensor in Continuum Mechanics,” J.D. Eshelby, in Inelastic Behavior of Solids, M.F. Kanninen et al., Eds. (McGraw-Hill, New York, 1970), p. 77.
88. “On a Class of Conservation Laws in Linearized and Finite Elastostatics,” J.K. Knowles and E. Sternberg, Archive for Rational Mechanics and Analysis, 44, 187 (1972).
89. “A Path Integral and the Approximate Analysis of Strain Concentrations by Notches and Cracks,” J.R. Rice, Transactions ASME, Journal of Applied Mechanics, 35, 379 (1968).
90. “Mathematical Analysis in the Mechanics of Fracture,” J.R. Rice, in Fracture; An Advanced Treatise, Vol. 2, H. Liebowitz, Ed. (Academic Press, New York, 1968), p. 19.
91. The Physics of Deformation and Flow, E.W. Billington and A. Tate (McGraw-Hill, New York, 1981).
92. Elementary Engineering Fracture Mechanics, 3rd rev. ed., D. Broek (Martinus Nijhoff, Dordrecht, The Netherlands, 1984), p. 69.
93. “Yielding of Steel Sheets Containing Slits,” D.S. Dugdale, Journal of the Mechanics and Physics of Solids, 8, 100 (1960).
94. “The Mathematical Theory of Equilibrium Cracks in Brittle Fracture,” G.I. Barenblatt, Advances in Applied Mechanics, 7, 55 (1962).
95. “Advanced Fracture Mechanics,” M.F. Kanninen and C.H. Popelar (Oxford University Press, New York, 1985).
96. “Decohesion of Films With Axisymmetric Geometries,” M.D. Thouless, Acta Metallica, 36, 3131 (1988).
97. Physics Vade Mecum, H.L. Anderson, Ed. (American Institute of Physics, 335 East 45th Street, New York, NY, 1981).
98. Theory of Elasticity, 3rd ed., S.P.T. Timoshenko and J.N. Goodier (McGraw-Hill, New York, 1970).
99. R. Feynman in The Feynman Lectures on Physics, Vol. 2, R. Feynman, R. Leighton, and M. Sands (Addison-Wesley, Reading, MA, 1964).
100. “Steady-State Cracking in Brittle Substrates Beneath Adherent Films,” Z. Suo and J.W. Hutchinson, Int. J. Solids Structures, 23, 1337 (1989).
101. J. Dundurs, “Elastic Interaction of Dislocation With Inhomogeneties,” in Mathematical Theory of Dislocations, (ASME, New York, 1969), pp. 70-115.
102. A.N. Gent and G.R. Hamed, “Peel Mechanics for an Elastic-Plastic Adherend,” Journal of Applied Polymer Science, 21, 2817 (1977).
103. “An Experimental Partitioning of the Mechanical Energy Expended During Peel Testing,” R.J. Farris and J. Goldfarb, in Adhesion Measurement of Films and Coatings, K.L. Mittal, Ed. (VSP, Utrecht, The Netherlands, 1995), p. 265.
104. “Contact Angle, Wetting and Adhesion: A Critical Review,” R.J. Good, in Contact Angle Wettability and Adhesion, K.L. Mittal, Ed. (VSP, Utretcht, The Netherlands, 1993), p. 3.
105. “The Peeling Test on Redux-Bonded Joints,” G.J. Spies, Aircraft Engineering, 25, 64 (1953).
106. “Theory of Peeling Through a Hookean Solid,” J.J. Bikerman, Journal of Applied Physics, 28, 1484 (1957).
107. “Experiments on Peeling,” J.J. Bikerman, Journal of Applied Polymer Science, 2, 216 (1959).
108. “Theory and Analysis of Peel Adhesion: Mechanisms and Mechanics,” D.H. Kaelble, Transactions of the Society of Rheology, 3, 161 (1959).
109. “Peel testing of Adhesive Bonded Metal,” S. Yurenka, Journal of Applied Polymer Science, VI-20, 136 (1962).
110. “Peel Adhesion. II. A Theoretical Analysis,” J.L. Gardon, Journal of Applied Polymer Science, 7, 643 (1963).
111. “Peel Mechanics for an Elastic-Plastic Adherend,” A.N. Gent and G.R. Hamed, Journal of Applied Polymer Science, 21, 2817 (1977).
112. I.M. Ward, Mechanical Properties of Solid Polymers, 2nd ed. (John Wiley and Sons, New York, 1983)
113. “Elasto-Plastic Analysis of the Peel Test for Thin Film Adhesion,” K.-S. Kim and J. Kim, Journal of Engineering Materials and Technology, 110, 266 (1988).
114. “Mechanics of the Peel Test for Thin Film Adhesion,” K.S. Kim, Material Research Society Symposium Proceedings, 119, 31 (1988).
115. “Elastoplastic Analysis of the Peel Test,” K.S. Kim and N. Aravas, International Journal of Solids Structures, 24, 417 (1988).
116. “Elasto-Plastic Analysis of the Peel Test for Thin Film Adhesion,” K.S. Kim and J. Kim, Journal of Engineering Material Technology, 110, 266 (1988).
117. “On the Mechanics of Adhesion Testing of Flexible Films,” N. Aravas, K.S. Kim, and M.J. Loukis, Materials Science and Engineering, A107, 159 (1989).
118. “Mechanical Effects in Peel Adhesion Test,” J. Kim, K.S. Kim, and Y.H. Kim, Journal of Adhesion Science and Technology, 3, 175 (1989).
119. P.G. Hodge, Plastic Analysis of Structures, McGraw-Hill, New York, 1959.
120. “Decohesion of a Cut Prestressed Film on a Substrate,” H.M. Jensen, J.W. Hutchinson, and K.-S. Kim, International Journal of Solids Structures, 26, 1099 (1990).
121. “Delamination From Surface Cracks in Composite Materials,” M.D. Thouless, H.C. Cao, and P.A. Mataga, Journal of Materials Science, 24, 1406 (1989).
122. C. Georgiadis, Composites and Structures, 18, 537 (1984).
123. Data Analysis for Scientists and Engineers, S. Meyer (John Wiley and Sons, New York, 1975), p. 284.
124. W. Weibull, Journal of Applied Mechanics, 18, 293 (1951).
125. “Measurement of Adhesion of Thin Film,” P. Benjamin and C. Weaver, Proceedings Royal Society, 254A, 163 (1960).
126. “Adhesion of Metal Films to Glass,” P. Benjamin and C. Weaver, Proceedings Royal Society, 254A, 177 (1960).
127. “The Adhesion of Evaporated Metal Film on Glass,” P. Benjamin and C. Weaver, Proceedings Royal Society, 261A, 516 (1961).
128. “The Adhesion of Metals to Crystal Faces,” P. Benjamin and C. Weaver, Proceedings Royal Society, 274A, 267 (1963).
129. G.G. Stoney, Proceedings Royal Society (London), A32, 172 (1909).
130. A. Brenner and S. Senderoff, Journal Res. Nat. Bur. Stand., 42, 105 (1949).
131. N.N. Davidenkov, Soviet Phys.-Solid State, 2, 2595 (1961).
132. S. Timoshenko, Mechanical Engineering, 45, 259 (1923).
133. A. Brenner and S. Senderoff, Journal Res. Natl. Bur. Stand., 42, 105 (1949).
134. “An Apparatus for Measuring Stress in Thin Films,” E. Klockholm, The Review of Scientific Instruments, 40, 1054 (1969).
135. “Intrinsic Stress in Evaporated Metal Films,” E. Klokholm and B.S. Berry, Journal of the Electrochemical Society: Solid State Science, 115, 823 (1968).
136. H.P. Murbach and H. Wilman, Proceedings Phys. Soc., B66, 905 (1953)
137. M.A. Novice, British Journal of Applied Physics, 13, 561 (1962).
138. P.H. Wojciechowski, Journal of Vacuum Science and Technology, A6, 1924 (1988).
139. B.C. Bell and D.A. Glocker, Journal of Vacuum Science and Technology, A9, 2437 (1991).
140. B.C. Bell and D.A. Glocker, Journal of Vacuum Science and Technology, A10, 1442 (1992).
141. A.E. Ennos, Applied Optics, 5, 51 (1966).
142. Introduction to Electronics for Students of Physics and Engineering Science, D.M. Hunten, Ed. (Holt, Reinhart, & Winston, New York, 1964), p. 42.
143. J.D. Wilcock and D.S. Campbell, Thin Solid Films, 3, 3 (1969).
144. The Theory of Sound, Lord Raleigh (Dover reprint, 1949).
145. Handbook of Mathematical Functions, M. Abramowitz and I. Stegun, National Bureau of Standards Applied Mathematics Series 55 (reprint, Dover Publications, New York, 1965).
146. Y.-C. Ku, L.-P. Ng, R. Carpenter, K. Lu, and H.I. Smith, Journal of Vacuum Science and Technology, B9, 3297 (1991).
147. “Stress Analysis of Thin Polyimide Films Using Holographic Interferometry,” R.J. Farris and M.A. Maden, Journal of Experimental Mechanics, June, 178 (1991);
148. R.J. Farris, M.A. Maden, A. Jagota, and S. Mazur, Journal of the American Ceramic Society, 77, 625 (1994);
149. R.J. Farris, Q.K. Tong, M.A. Maden, and A. Jagota, Journal of the American Ceramic Society, 77, 636 (1994).
150. J.E. Kasper and S.A. Feller (John Wiley & Sons, New York, 1987). Principles of Holography, by H.M. Smith (John Wiley & Sons, New York, 1975).
151. “Stress Measurements in Thin Films Deposited on Single Crystal Substrates Through X-ray Topography Techniques,” E.W. Hearn, in Advances in X-ray Analysis, Vol. 20, H.F. McMurdie, C.S. Barrett, J.B. Newkirk, and C.O. Ruud (Plenum Publishing, New York, 1977), p. 273.
152. “X-ray Diffraction Method,” M. François, N.M. Sprauel, C.F. Déhan, M.R. James, F. Convert, J. Lu, J.L. Lebrun, and R.W. Hendricks, in Handbook of Measurement of Residual Stresses, J. Lu, Ed. (Society for Experimental Mechanics, published by Fairmount Press, Liburn, GA), Chap. 5.
153. Physics, Parts 1 and 2, D. Halliday and R. Resnick, Eds. (John Wiley & Sons, New York, 1978);
154. The Feynman Lectures on Physics, Vol. 2, R.P. Feynman, R.B. Leighton, and M. Sands (Addison-Wesley, Reading, MA, 1964), Chapter 39, p. 39-7.
155. Finite Deformation of an Elastic Solid, T.D. Murnaghan (John Wiley & Sons, New York, 1951).
156. D.S. Hughes and J.L. Kelly, Physics Review, 92, 1145 (1953).
157. “Ultrasonic Methods,” R.B. Thompson, W.-Y. Lu, and A.V. Clark, Jr., in Handbook of Measurement of Residual Stresses, J. Lu, (Society for Experimental Mechanics, published by Fairmont Press, Lilburn, GA, 1996), Chap. 7, p. 149.
158. “Angular Dependence of Ultrasonic Wave Propagation in a Stressed Orthorhombic Continuum: Theory and Application to the Measurement of Stress and Texture,” R.B. Thompson, S.S. Lee, and J.F. Smith, Journal of the Acoustic Society of America, 80, 921 (1986).
159. “On Waves Propagated Along the Plane Surfaces of an Elastic Solid,” Lord Rayleigh, Proceedings of the London Mathematical Society, 17, 4 (1885).
160. Rayleigh and Lamb Waves, Physical Theory and Applications, I.A. Viktorov (Plenum Press, New York, 1967), Chap. 1.
161. Electromagnetic Fields and Interactions, R. Becker, (F. Sauter, Ed., Blaisdell Publishing Company, New York, 1964).
162. The Feynman Lectures on Physics, Vol. 2, R.P. Feynman, R.B. Leighton, and M. Sands, (Addison-Wesley, Reading, MA, 1964).
163. Physics, Parts 1 and 2, combined 3rd ed., D. Halliday and R. Resnick (John Wiley & Sons, New York, 1978);
164. J.C. Maxwell, Transactions of the Royal Society of Edinburgh, 20, part 1, 87 (1853).
165. Experimental Stress Analysis, 3rd ed., J.W. Dally and W.F. Riley (McGraw-Hill, New York, 1991).
166. “Determination of Initial Stresses by Measuring the Deformation Around Drilled Holes,” J. Mathar, Transactions of the ASME, 56, 249 (1934).
167. “Hole Drilling and Ring Core Methods,” G.S. Schajer, M.T. Flaman, G. Roy, and J. Lu, in Handbook of Measurement of Residual Stresses, J. Lu, Ed. (Society for Experimental Mechanics, published by Fairmont Press, Liburn, GA, 1996).
168. “Stresses in Thin Polymeric Films: Relevance to Adhesion and Fracture,” R.H. Lacombe, in Surface and Colloid Science in Computer Technology, K.L. Mittal, Ed. (Plenum Press, New York, 1987).
169. “Magnetic Methods,” S. Tiitto, in Handbook of Measurement of Residual Stresses, J. Lu, Ed. (Society for Experimental Mechanics, published by Fairmont Press, Liburn, GA, 1996), Chap. 8.
170. “Rauschen der Ferromagnetischen Materialen,” H. Barkhausen, Physics Zeitschrift, 20, 401 (1919).
171. S. Matsumoto, Y. Sato, M. Tsutsumi, and N. Setaka, Journal of Materal Science, 17, 3106 (1982).
172. Applications of Diamond Films and Related Materials: Third International Conference, NIST Special Publication 885, A. Feldman, Y. Tzeng, W.A. Yarbrough, M. Yoshikawa, and M. Murakawa, Eds. (U.S. Government Printing Office, Washington, DC, 1995).
173. D.S. Knight and W.B. White, Journal of Material Research, 2, 385 (1989).
174. “Measurement of Stress in CVD Diamond Films,” K.J. Gray, J.M. Olson, and H. Windishmann, in Mechanical Behavior of Diamond and Other Forms of Carbon, MRS Materials Research Society Symposium Proceedings, Vol. 383, M.D. Drory, D.B. Bogy, M.S. Donley, and J.E. Field (MRS Press, Pittsburgh, PA, 1995), p. 135.
175. “Residual Stress in Diamond and Amorphous Carbon Films,” Joel W. Ager III, in Mechanical Behavior of Diamond and Other Forms of Carbon, MRS Materials Research Society Symposium Proceedings, Vol. 383, M.D. Drory, D.B. Bogy, M.S. Donley, and J.E. Field (MRS Press, Pittsburgh, PA, 1995), p. 143.
176. “Stress in Thin Diamond Films on Various Materials Measured by Microraman Spectroscopy,” V.G. Ralchenko, E.D. Obraztsova, K.G. Korotushenko, A.A. Smolin, S.M. Pimenov, and V.G. Pereverzev, in Mechanical Behavior of Diamond and Other Forms of Carbon, MRS Materials Research Society Symposium Proceedings, Vol. 383, M.D. Drory, D.B. Bogy, M.S. Donley, and J.E. Field (MRS Press, Pittsburgh, PA, 1995), p. 153.
177. “On the Thermoelastic, Thermomagnetic and Pyro-electric Properties of Matter,” W. Thompson (Lord Kelvin), Phil. Mag., 5, 4 (1878).
178. “Plasticity and Consolidation in a Porous Anisotropic Solid,” M.A. Biot, Journal of Applied Physics, 26, 182 (1955).
179. “Irreversible Thermodynamics With Application to Viscoelasticity,” M.A. Biot, Physics Review, 97, 1463 (1955).
180. “Thermoelasticity and Irreversible Thermodynamics,” M.A. Biot, Journal of Applied Physics, 27, 240 (1956).
181. R.F.S. Hearmon, in Landolt-Bornstein: Numerical Data and Functional Relationships in Science and Technology, Vol. 3/1 (Springer, Berlin, 1966), p. 12.
182. “Measurement of Acoustoelastic and Third-Order Elastic Constants for Rail Steel,” D.M. Eagle and D.E. Bray, Journal of the Acoustics Society of America, 60, 741 (1976).
183. L.P Buchwalter and R.H. Lacombe, Journal of Adhesion Science and Technology, 2-6, 463 (1988).
184. “Adhesion of Polyimide to Fluorine-Contaminated SiO2 Surface. Effect of Aminopropyltriethoxysilane on the Adhesion,” L.P. Buchwalter and R.H. Lacombe, Journal of Adhesion Science and Technology, 5-6, 449 (1991).
185. D. Briggs and M.P. Seah, Practical Surface Analysis, Second Edition, Volume 1: Auger and X-ray Photoelectron Spectroscopy (John Wiley and Sons, New York, 1990).
186. The Mathematics of Diffusion, J. Crank (Oxford University Press, Oxford, UK, 1964).
187. “Steady State Cracking in a Brittle Substrate Beneath Adherent Films,” Z. Suo and J. Hutchinson, International Journal of Solids Structures, 25, 1337 (1989).
188. “The Decohesion of Thin Films From Brittle Substrates,” M.S. Hu, M.D. Thouless, and A.G. Evans, Acta Metallica, 36, 1301 (1988).