A comprehensive review on the environmental impacts of diesel/biodiesel additives

Energy Conversion and Management

Volumn 174, Issue , 2018, Pages 579-614

  Hosseinzadeh Bandbafha, Homa ^a   Tabatabaei, Meisam ^b,c   Aghbashlo, Mortaza ^a   Khanali, Majid ^a   Demirbas, Ayhan ^d  

^a UNIVERSITY OF TEHRAN   (Iran)

^b AGRICULTURAL BIOTECHNOLOGY RESEARCH INSTITUTE OF IRAN ABRII   (Iran)

^c BIOFUEL RESEARCH TEAM BRTEAM   (Iran)

^d KING ABDULAZIZ UNIVERSITY   (Saudi Arabia)

Author keywords

Biodiesel; Combustion; Emissions; Fuel additives; Life cycle assessment

Indexed keywords

ALTERNATIVE FUELS; BIODIESEL; CALORIFIC VALUE; COMBUSTION; DECISION MAKING; DIESEL ENGINES; EXHAUST GASES; GAS EMISSIONS; GAS FUEL ANALYSIS; LIFE CYCLE; MULTIOBJECTIVE OPTIMIZATION; PARTICULATE EMISSIONS; POLLUTION;

CETANE NUMBER IMPROVER; CONFLICTING OBJECTIVES; DECISION MAKING PROCEDURE; GLOBAL OPTIMAL POINT; HAZARDOUS EMISSIONS; LIFE CYCLE ASSESSMENT (LCA); OPERATING PARAMETERS; REGULATED EMISSIONS;

FUEL ADDITIVES;

EID: 85051975488     PISSN: 01968904     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.enconman.2018.08.050     Document Type: Review

References (357)

1. Aghbashlo, M., Hosseinpour, S., Tabatabaei, M., Soufiyan, M.M., Multi-objective exergetic and technical optimization of a piezoelectric ultrasonic reactor applied to synthesize biodiesel from waste cooking oil (WCO) using soft computing techniques. Fuel 235 (2019), 100–112.
2. Singh, D., Singal, S.K., Garg, M.O., Maiti, P., Mishra, S., Ghosh, P.K., Transient performance and emission characteristics of a heavy-duty diesel engine fuelled with microalga Chlorella variabilis and Jatropha curcas biodiesels. Energy Convers Manage 106 (2015), 892–900.
3. Imdadul, H.K., Rashed, M.M., Shahin, M.M., Masjuki, H.H., Kalam, M.A., Kamruzzaman, M., et al. Quality improvement of biodiesel blends using different promising fuel additives to reduce fuel consumption and NO emission from CI engine. Energy Convers Manage 138 (2017), 327–337.
4. Naylor, R.L., Higgins, M.M., The rise in global biodiesel production: Implications for food security. Glob Food Sec, 2017.
5. Aghbashlo, M., Tabatabaei, M., Rastegari, H., Ghaziaskar, H.S., Valijanian, E., Exergy-based optimization of a continuous reactor applied to produce value-added chemicals from glycerol through esterification with acetic acid. Energy 150 (2018), 351–362.
6. Van Gerpen, J., Biodiesel processing and production. Fuel Process Technol 86 (2005), 1097–1107.
7. Hosseinpour, S., Aghbashlo, M., Tabatabaei, M., Biomass higher heating value (HHV) modeling on the basis of proximate analysis using iterative network-based fuzzy partial least squares coupled with principle component analysis (PCA-INFPLS). Fuel 222 (2018), 1–10.
8. Aghbashlo, M., Shamshirband, S., Tabatabaei, M., Yee, L., Larimi, Y.N., The use of ELM-WT (extreme learning machine with wavelet transform algorithm) to predict exergetic performance of a DI diesel engine running on diesel/biodiesel blends containing polymer waste. Energy 94 (2016), 443–456.
9. Demirbas, A., Importance of biodiesel as transportation fuel. Energy Policy 35 (2007), 4661–4670.
10. Aghbashlo, M., Tabatabaei, M., Hosseinpour, S., On the exergoeconomic and exergoenvironmental evaluation and optimization of biodiesel synthesis from waste cooking oil (WCO) using a low power, high frequency ultrasonic reactor. Energy Convers Manage 164 (2018), 385–398.
11. Rajaeifar, M.A., Akram, A., Ghobadian, B., Rafiee, S., Heijungs, R., Tabatabaei, M., Environmental impact assessment of olive pomace oil biodiesel production and consumption: a comparative lifecycle assessment. Energy 106 (2016), 87–102.
12. Yusuf, N., Kamarudin, S.K., Yaakub, Z., Overview on the current trends in biodiesel production. Energy Convers Manage 52 (2011), 2741–2751.
13. Lohan, S.K., Ram, T., Mukesh, S., Ali, M., Arya, S., Sustainability of biodiesel production as vehicular fuel in Indian perspective. Renew Sustain Energy Rev 25 (2013), 251–259.
14. Aghbashlo, M., Tabatabaei, M., Mohammadi, P., Pourvosoughi, N., Nikbakht, A.M., Goli, S.A., Improving exergetic and sustainability parameters of a DI diesel engine using polymer waste dissolved in biodiesel as a novel diesel additive. Energy Convers Manage 105 (2015), 328–337.
15. Tang, H., Abunasser, N., Wang, A., Clark, B.R., Wadumesthrige, K., Zeng, S., et al. Quality survey of biodiesel blends sold at retail stations. Fuel 87 (2008), 2951–2955.
16. McCormick RL. Empirical study of the stability of biodiesel and biodiesel blends: Milestone Report. DIANE Publishing; 2009.
17. Aghbashlo, M., Demirbas, A., Biodiesel: hopes and dreads. Biofuel Res J, 3, 2016, 379.
18. Qi, D.H., Geng, L.M., Chen, H., Bian, Y.Z.H., Liu, J., Ren, X.C.H., Combustion and performance evaluation of a diesel engine fueled with biodiesel produced from soybean crude oil. Renew Energy 34 (2009), 2706–2713.
19. Yilmaz, N., Morton, B., Effects of preheating vegetable oils on performance and emission characteristics of two diesel engines. Biomass Bioenergy 35 (2011), 2028–2033.
20. Atmanlı A., Yüksel, B., Ileri, E., Experimental investigation of the effect of diesel-cotton oil-n-butanol ternary blends on phase stability, engine performance and exhaust emission parameters in a diesel engine. Fuel 109 (2013), 503–511.
21. Bhaskar, S.V., Babu, G.S., Experimental analysis of emission characteristics of direct injection CI engine using FOME and its diesel blends as bio-fuel. Int J Curr Eng Technol 5 (2015), 1718–1722.
22. Shahid, E.M., Jamal, Y., Performance evaluation of a diesel engine using biodiesel. Pakistan J Eng Appl Sci, 2016.
23. Miri, S.M.R., Seyedi, S.R.M., Ghobadian, B., Effects of biodiesel fuel synthesized from non-edible rapeseed oil on performance and emission variables of diesel engines. J Clean Prod 142 (2017), 3798–3808.
24. Mofijur M, Rasul MG, Hassan NMS. Effect of butanol additive on the performance and emission of Australian macadamia biodiesel fuel in a diesel engine. Sustain. Renew. Energy Eng. (ICSREE), 2017 2nd Int. Conf., IEEE; 2017. p. 33–7.
25. Bär, F., Hopf, H., Knorr, M., Krahl, J., Synthesis, characterization and antioxidant properties of 2, 4, 6-tris-isopropylbenzoic acid hydrazide in biodiesel. Fuel 215 (2018), 249–257.
26. Mohammadi P, Nikbakht AM, Tabatabaei M, Farhadi K. A novel diesel fuel additive to improve fuel properties and to reduce emissions; 2012.
27. Mohammadi, P., Tabatabaei, M., Nikbakht, A.M., Esmaeili, Z., Improvement of the cold flow characteristics of biodiesel containing dissolved polymer wastes using acetone. Biofuel Res J 1 (2014), 26–29.
28. Khalife, E., Tabatabaei, M., Demirbas, A., Aghbashlo, M., Impacts of additives on performance and emission characteristics of diesel engines during steady state operation. Prog Energy Combust Sci 59 (2017), 32–78.
29. Jiaqiang, E., Pham, M., Zhao, D., Deng, Y., Le, D., Zuo, W., et al. Effect of different technologies on combustion and emissions of the diesel engine fueled with biodiesel: A review. Renew Sustain Energy Rev 80 (2017), 620–647.
30. Senthil, R., Silambarasan, R., Environmental effect of antioxidant additives on exhaust emission reduction in compression ignition engine fuelled with Annona methyl ester. Environ Technol 36 (2015), 2079–2085.
31. Swaminathan, C., Sarangan, J., Performance and exhaust emission characteristics of a CI engine fueled with biodiesel (fish oil) with DEE as additive. Biomass Bioenergy 39 (2012), 168–174.
32. Rashedul, H.K., Masjuki, H.H., Kalam, M.A., Ashraful, A.M., Rahman, S.M.A., Shahir, S.A., The effect of additives on properties, performance and emission of biodiesel fuelled compression ignition engine. Energy Convers Manage 88 (2014), 348–364.
33. Kannan, G.R., Karvembu, R., Anand, R., Effect of metal based additive on performance emission and combustion characteristics of diesel engine fuelled with biodiesel. Appl Energy 88 (2011), 3694–3703.
34. Keskin, A., Gürü M., Alt parmak, D., Biodiesel production from tall oil with synthesized Mn and Ni based additives: effects of the additives on fuel consumption and emissions. Fuel 86 (2007), 1139–1143.
35. Zhao, H., Ge, Y., Zhang, T., Zhang, J., Tan, J., Zhang, H., Unregulated emissions from diesel engine with particulate filter using Fe-based fuel borne catalyst. J Environ Sci 26 (2014), 2027–2033.
36. Keskin, A., Ocakoglu, K., Resitoglu, I.A., Avsar, G., Emen, F.M., Buldum, B., Using Pd (II) and Ni (II) complexes with N, N-dimethyl-N -2-chlorobenzoylthiourea ligand as fuel additives in diesel engine. Fuel 162 (2015), 202–206.
37. Aghbashlo, M., Tabatabaei, M., Khalife, E., Najafi, B., Mirsalim, S.M., Gharehghani, A., et al. A novel emulsion fuel containing aqueous nano cerium oxide additive in diesel-biodiesel blends to improve diesel engines performance and reduce exhaust emissions: Part II-Exergetic analysis. Fuel 205 (2017), 262–271.
38. Venkatesan, H., Sivamani, S., Sampath, S., Gopi, V., Kumar, D., A comprehensive review on the effect of nano metallic additives on fuel properties, engine performance and emission characteristics. Int J Renew Energy Res 7 (2017), 825–843.
39. Fazal, M.A., Suhaila, N.R., Haseeb, A., Rubaiee, S., Al-Zahrani, A., Influence of copper on the instability and corrosiveness of palm biodiesel and its blends: An assessment on biodiesel sustainability. J Clean Prod 171 (2018), 1407–1414.
40. Aghbashlo, M., Tabatabaei, M., Khalife, E., Shojaei, T.R., Dadak, A., Exergoeconomic analysis of a DI diesel engine fueled with diesel/biodiesel (B5) emulsions containing aqueous nano cerium oxide. Energy 149 (2018), 967–978.
41. Khalife, E., Tabatabaei, M., Najafi, B., Mirsalim, S.M., Gharehghani, A., Mohammadi, P., et al. A novel emulsion fuel containing aqueous nano cerium oxide additive in diesel-biodiesel blends to improve diesel engines performance and reduce exhaust emissions: Part I-Experimental analysis. Fuel 207 (2017), 741–750.
42. Aghbashlo, M., Tabatabaei, M., Mohammadi, P., Mirzajanzadeh, M., Ardjmand, M., Rashidi, A., Effect of an emission-reducing soluble hybrid nanocatalyst in diesel/biodiesel blends on exergetic performance of a DI diesel engine. Renew Energy 93 (2016), 353–368.
43. Yang, J., Ferreira, J.M.F., Inhibitory effect of the Al2O3-SiO2 mixed additives on the anatase-rutile phase transformation. Mater Lett 36 (1998), 320–324.
44. Frusteri, F., Arena, F., Bonura, G., Cannilla, C., Spadaro, L., Di Blasi, O., Catalytic etherification of glycerol by tert-butyl alcohol to produce oxygenated additives for diesel fuel. Appl Catal A Gen 367 (2009), 77–83.
45. Lapuerta, M., Garcia-Contreras, R., Campos-Fernández, J., Dorado, M.P., Stability, lubricity, viscosity, and cold-flow properties of alcohol- diesel blends. Energy Fuels 24 (2010), 4497–4502.
46. Ribeiro, N.M., Pinto, A.C., Quintella, C.M., da Rocha, G.O., Teixeira, L.S.G., Guarieiro, L.L.N., et al. The role of additives for diesel and diesel blended (ethanol or biodiesel) fuels: a review. Energy Fuels 21 (2007), 2433–2445.
47. Liu, H., Zhang, P., Liu, X., Chen, B., Geng, C., Li, B., et al. Laser diagnostics and chemical kinetic analysis of PAHs and soot in co-flow partially premixed flames using diesel surrogate and oxygenated additives of n-butanol and DMF. Combust Flame 188 (2018), 129–141.
48. Li, Y., Chen, Y., Wu, G., Liu, J., Experimental evaluation of water-containing isopropanol-n-butanol-ethanol and gasoline blend as a fuel candidate in spark-ignition engine. Appl Energy 219 (2018), 42–52.
49. Li, Y., Chen, Y., Wu, G., Chia-fon, F.L., Liu, J., Experimental comparison of acetone-n-butanol-ethanol (ABE) and isopropanol-n-butanol-ethanol (IBE) as fuel candidate in spark-ignition engine. Appl Therm Eng 133 (2018), 179–187.
50. Li, Y., Nithyanandan, K., Lee, T.H., Donahue, R.M., Lin, Y., Lee, C.-F., et al. Effect of water-containing acetone-butanol-ethanol gasoline blends on combustion, performance, and emissions characteristics of a spark-ignition engine. Energy Convers Manage 117 (2016), 21–30.
51. Li, Y., Meng, L., Nithyanandan, K., Lee, T.H., Lin, Y., Chia-fon, F.L., et al. Combustion, performance and emissions characteristics of a spark-ignition engine fueled with isopropanol-n-butanol-ethanol and gasoline blends. Fuel 184 (2016), 864–872.
52. Li, Y., Meng, L., Nithyanandan, K., Lee, T.H., Lin, Y., Chia-fon, F.L., et al. Experimental investigation of a spark ignition engine fueled with acetone-butanol-ethanol and gasoline blends. Energy 121 (2017), 43–54.
53. Schober, S., Mittelbach, M., The impact of antioxidants on biodiesel oxidation stability. Eur J Lipid Sci Technol 106 (2004), 382–389.
54. Karavalakis, G., Hilari, D., Givalou, L., Karonis, D., Stournas, S., Storage stability and ageing effect of biodiesel blends treated with different antioxidants. Energy 36 (2011), 369–374.
55. Ramalingam, S., Rajendran, S., Ganesan, P., Improving the performance is better and emission reductions from Annona biodiesel operated diesel engine using 1, 4-dioxane fuel additive. Fuel 185 (2016), 804–809.
56. Hajjari, M., Ardjmand, M., Tabatabaei, M., Experimental investigation of the effect of cerium oxide nanoparticles as a combustion-improving additive on biodiesel oxidative stability: mechanism. RSC Adv 4 (2014), 14352–14356.
57. Varatharajan, K., Cheralathan, M., Velraj, R., Mitigation of NOx emissions from a jatropha biodiesel fuelled DI diesel engine using antioxidant additives. Fuel 90 (2011), 2721–2725.
58. Ileri, E., Günnur, G., Experimental investigation of the effect of antioxidant additives on NOx emissions of a diesel engine using biodiesel. Fuel 125 (2014), 44–49.
59. Palash, S.M., Kalam, M.A., Masjuki, H.H., Arbab, M.I., Masum, B.M., Sanjid, A., Impacts of NOx reducing antioxidant additive on performance and emissions of a multi-cylinder diesel engine fueled with Jatropha biodiesel blends. Energy Convers Manage 77 (2014), 577–585.
60. Nanthagopal, K., Ashok, B., Raj, R.T.K., Influence of fuel injection pressures on Calophyllum inophyllum methyl ester fuelled direct injection diesel engine. Energy Convers Manage 116 (2016), 165–173.
61. García, M., Botella, L., Gil-Lalaguna, N., Arauzo, J., Gonzalo, A., Sánchez, J.L., Antioxidants for biodiesel: Additives prepared from extracted fractions of bio-oil. Fuel Process Technol 156 (2017), 407–414.
62. Ryu, K., The characteristics of performance and exhaust emissions of a diesel engine using a biodiesel with antioxidants. Bioresour Technol 101 (2010), S78–S82.
63. Focke, W.W., van der Westhuizen, I., Grobler, A.B.L., Nshoane, K.T., Reddy, J.K., Luyt, A.S., The effect of synthetic antioxidants on the oxidative stability of biodiesel. Fuel 94 (2012), 227–233.
64. Obadiah, A., Kannan, R., Ramasubbu, A., Kumar, S.V., Studies on the effect of antioxidants on the long-term storage and oxidation stability of Pongamia pinnata (L.) Pierre biodiesel. Fuel Process Technol 99 (2012), 56–63.
65. Fattah, I.M.R., Masjuki, H.H., Kalam, M.A., Mofijur, M., Abedin, M.J., Effect of antioxidant on the performance and emission characteristics of a diesel engine fueled with palm biodiesel blends. Energy Convers Manage 79 (2014), 265–272.
66. Chandran, D., Ng, H.K., Lau, H.L.N., Gan, S., Choo, Y.M., Deterioration of palm biodiesel fuel under common rail diesel engine operation. Energy 120 (2017), 854–863.
67. Fan, L., Hao, Q., Kan, X., Three-dimensional graphite paper based imprinted electrochemical sensor for tertiary butylhydroquinone selective recognition and sensitive detection. Sens Actuators B Chem 256 (2018), 520–527.
68. Vieitez, I., Maceiras, L., Jachmanián, I., Alborés, S., Antioxidant and antibacterial activity of different extracts from herbs obtained by maceration or supercritical technology. J Supercrit Fluids 133 (2018), 58–64.
69. Rawat, D.S., Joshi, G., Pandey, J.K., Lamba, B.Y., Kumar, P., Algal biodiesel stabilization with lower concentration of 1: 3 ratios of binary antioxidants-Key factors to achieve the best synergy for maximum stabilization. Fuel 214 (2018), 471–479.
70. Singh AP, Dhar A, Agarwal AK. Evolving energy scenario: role and scope for alternative fuels in transport sector. Prospect. Altern. Transp. Fuels, Springer; 2018. p. 7–19.
71. Tinprabath, P., Hespel, C., Chanchaona, S., Foucher, F., Influence of biodiesel and diesel fuel blends on the injection rate under cold conditions. Fuel 144 (2015), 80–89.
72. Islam, M.M., Hassan, M.H., Kalam, M.A., Habibullah, M., Hossain, M.M., Improvement of cold flow properties of Cocos nucifera and Calophyllum inophyllum biodiesel blends using polymethyl acrylate additive. J Clean Prod 137 (2016), 322–329.
73. Sierra-Cantor, J.F., Guerrero-Fajardo, C.A., Methods for improving the cold flow properties of biodiesel with high saturated fatty acids content: A review. Renew Sustain Energy Rev 72 (2017), 774–790.
74. Cao, L., Wang, J., Liu, C., Chen, Y., Liu, K., Han, S., Ethylene vinyl acetate copolymer: A bio-based cold flow improver for waste cooking oil derived biodiesel blends. Appl Energy 132 (2014), 163–167.
75. Wang, J., Cao, L., Han, S., Effect of polymeric cold flow improvers on flow properties of biodiesel from waste cooking oil. Fuel 117 (2014), 876–881.
76. Verma, P., Sharma, M.P., Dwivedi, G., Evaluation and enhancement of cold flow properties of palm oil and its biodiesel. Energy Rep 2 (2016), 8–13.
77. Monirul, I.M., Kalam, M.A., Masjuki, H.H., Zulkifli, N.W.M., Shahir, S.A., Mosarof, M.H., et al. Influence of poly (methyl acrylate) additive on cold flow properties of coconut biodiesel blends and exhaust gas emissions. Renew Energy 101 (2017), 702–712.
78. Freire, L.M.S., José Filho, R.C., Moura, C.V.R., Soledade, L.E.B., Stragevitch, L., Cordeiro, Â.M.T.M., et al. Evaluation of the oxidative stability and flow properties of quaternary mixtures of vegetable oils for biodiesel production. Fuel 95 (2012), 126–130.
79. Misra, R.D., Murthy, M.S., Blending of additives with biodiesels to improve the cold flow properties, combustion and emission performance in a compression ignition engine-A review. Renew Sustain Energy Rev 15 (2011), 2413–2422.
80. Ramalho, E., Carvalho Filho, J.R., Albuquerque, A.R., De Oliveira, S.F., Cavalcanti, E.H.S., Stragevitch, L., et al. Low temperature behavior of poultry fat biodiesel: diesel blends. Fuel 93 (2012), 601–605.
81. Zuleta, E.C., Rios, L.A., Benjumea, P.N., Oxidative stability and cold flow behavior of palm, sacha-inchi, jatropha and castor oil biodiesel blends. Fuel Process Technol 102 (2012), 96–101.
82. Moser, B.R., Impact of fatty ester composition on low temperature properties of biodiesel-petroleum diesel blends. Fuel 115 (2014), 500–506.
83. Anastopoulos, G., Lois, E., Serdari, A., Zanikos, F., Stournas, S., Kalligeros, S., Lubrication properties of low-sulfur diesel fuels in the presence of specific types of fatty acid derivatives. Energy Fuels 15 (2001), 106–112.
84. Nassar, A.M., Ahmed, N.S., El-shazly, R.I., Preparation and evaluation of the mixtures of sulfonate and phenate as lube oil additives. Int J Ind Chem 8 (2017), 383–395.
85. Malec, R.E., Lubricant Composition, 1980.
86. Perilstein WL. Inventor; Ethyl Corp, assignee. Diesel fuel compositions having anti-wear properties, United States patent US 4,185,594; 1980.
87. Rezende, M.J.C., Perruso, C.R., Azevedo, D., de, A., Pinto, A.C., Characterization of lubricity improver additive in diesel by gas chromatography-mass spectrometry. J Chromatogr A 1063 (2005), 211–215.
88. Knothe, G., Razon, L.F., Biodiesel fuels. Prog Energy Combust Sci 58 (2017), 36–59.
89. Encinar, J.M., Gonzalez, J.F., Rodriguez, J.J., Tejedor, A., Biodiesel fuels from vegetable oils: transesterification of Cynara c ardunculus L. oils with ethanol. Energy Fuels 16 (2002), 443–450.
90. Lü X., Yang, J., Zhang, W., Huang, Z., Improving the combustion and emissions of direct injection compression ignition engines using oxygenated fuel additives combined with a cetane number improver. Energy Fuels 19 (2005), 1879–1888.
91. Hosseinpour, S., Aghbashlo, M., Tabatabaei, M., Khalife, E., Exact estimation of biodiesel cetane number (CN) from its fatty acid methyl esters (FAMEs) profile using partial least square (PLS) adapted by artificial neural network (ANN). Energy Convers Manage 124 (2016), 389–398.
92. Datta, A., Mandal, B.K., Engine performance, combustion and emission characteristics of a compression ignition engine operating on different biodiesel-alcohol blends. Energy 125 (2017), 470–483.
93. Kumar, M.V., Babu, A.V., Kumar, P.R., The impacts on combustion, performance and emissions of biodiesel by using additives in direct injection diesel engine. Alexandria Eng J, 2017.
94. Prasad, R., Bella, V.R., A review on diesel soot emission, its effect and control. Bull Chem React Eng Catal, 5, 2010, 69.
95. Re ito lu brahim, A., Altini ik, K., Keskin, A., The pollutant emissions from diesel-engine vehicles and exhaust aftertreatment systems. Clean Technol Environ Policy 17 (2015), 15–27.
96. Kumar, A., Tyagi, S.K., Benzene and toluene profiles in ambient air of Delhi as determined by active sampling and GC analysis. J Sci Indust Res 65 (2006), 252–257.
97. Garg, P., Energy scenario and vision 2020 in India. J Sustain Energy Environ, 2012, 3.
98. Bhandarkar, S., Vehicular pollution, their effect on human health and mitigation measures. VE, 1, 2013, 3340.
99. Mata, T.M., Martins, A.A., Caetano, N.S., Microalgae for biodiesel production and other applications: a review. Renew Sustain Energy Rev 14 (2010), 217–232.
100. Kim, K.H., Kabir, E., Kabir, S., A review on the human health impact of airborne particulate matter. Environ Int 74 (2015), 136–143.
101. Hazar, H., Effects of biodiesel on a low heat loss diesel engine. Renew Energy 34 (2009), 1533–1537.
102. Ozsezen, A.N., Canakci, M., Turkcan, A., Sayin, C., Performance and combustion characteristics of a DI diesel engine fueled with waste palm oil and canola oil methyl esters. Fuel 88 (2009), 629–636.
103. Utlu, Z., Koçak, M.S., The effect of biodiesel fuel obtained from waste frying oil on direct injection diesel engine performance and exhaust emissions. Renew Energy 33 (2008), 1936–1941.
104. Özgünay, H., Çolak, S., Zengin, G., Sari, Ö., Sarikahya, H., Yüceer, L., Performance and emission study of biodiesel from leather industry pre-fleshings. Waste Manage 27 (2007), 1897–1901.
105. Reyes, J.F., Sepulveda, M.A., PM-10 emissions and power of a diesel engine fueled with crude and refined biodiesel from salmon oil. Fuel 85 (2006), 1714–1719.
106. Lin, B.F., Huang, J.H., Huang, D.Y., Experimental study of the effects of vegetable oil methyl ester on DI diesel engine performance characteristics and pollutant emissions. Fuel 88 (2009), 1779–1785.
107. Yadav, A.K., Khan, M.E., Dubey, A.M., Pal, A., Performance and emission characteristics of a transportation diesel engine operated with non-edible vegetable oils biodiesel. Case Stud Therm Eng 8 (2016), 236–244.
108. Hassaneen, A., Munack, A., Ruschel, Y., Schroeder, O., Krahl, J., Fuel economy and emission characteristics of Gas-to-Liquid (GTL) and Rapeseed Methyl Ester (RME) as alternative fuels for diesel engines. Fuel 97 (2012), 125–130.
109. Allocca, L., Mancaruso, E., Montanaro, A., Sequino, L., Vaglieco, B.M., Evaluation of RME (rapeseed methyl ester) and mineral diesel fuels behaviour in quiescent vessel and EURO 5 engine. Energy 77 (2014), 783–790.
110. Millo, F., Debnath, B.K., Vlachos, T., Ciaravino, C., Postrioti, L., Buitoni, G., Effects of different biofuels blends on performance and emissions of an automotive diesel engine. Fuel 159 (2015), 614–627.
111. Singh, D., Subramanian, K.A., Singal, S.K., Emissions and fuel consumption characteristics of a heavy duty diesel engine fueled with hydroprocessed renewable diesel and biodiesel. Appl Energy 155 (2015), 440–446.
112. Chang, Y.C., Lee, W.J., Wu, T.S., Wu, C.Y., Chen, S.J., Use of water containing acetone-butanol-ethanol for NO x-PM (nitrogen oxide-particulate matter) trade-off in the diesel engine fueled with biodiesel. Energy 64 (2014), 678–687.
113. Behçet, R., Oktay, H., Çakmak, A., Aydin, H., Comparison of exhaust emissions of biodiesel–diesel fuel blends produced from animal fats. Renew Sustain Energy Rev 46 (2015), 157–165.
114. Imtenan, S., Masjuki, H.H., Varman, M., Fattah, I.M.R., Sajjad, H., Arbab, M.I., Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend. Energy Convers Manage 94 (2015), 84–94.
115. Özener, O., Yüksek, L., Ergenç A.T., Özkan, M., Effects of soybean biodiesel on a DI diesel engine performance, emission and combustion characteristics. Fuel 115 (2014), 875–883.
116. Wei, L., Cheung, C.S., Ning, Z., Influence of waste cooking oil biodiesel on combustion, unregulated gaseous emissions and particulate emissions of a direct-injection diesel engine. Energy 127 (2017), 175–185.
117. Dhamodaran, G., Krishnan, R., Pochareddy, Y.K., Pyarelal, H.M., Sivasubramanian, H., Ganeshram, A.K., A comparative study of combustion, emission, and performance characteristics of rice-bran-, neem-, and cottonseed-oil biodiesels with varying degree of unsaturation. Fuel 187 (2017), 296–305.
118. Aydin, H., Bayindir, H., An experimental study on the exhaust emissions of a partially loaded compressed ignition engine fueled with biodiesel derived from cottonseed oil. Energy Sources, Part A Recover Util Environ Eff 32 (2010), 1076–1085.
119. Macor, A., Avella, F., Faedo, D., Effects of 30% v/v biodiesel/diesel fuel blend on regulated and unregulated pollutant emissions from diesel engines. Appl Energy 88 (2011), 4989–5001.
120. Bari, S., Performance, combustion and emission tests of a metro-bus running on biodiesel-ULSD blended (B20) fuel. Appl Energy 124 (2014), 35–43.
121. Yang, P.-M., Lin, Y.-C., Lin, K.C., Jhang, S.-R., Chen, S.-C., Wang, C.-C., et al. Comparison of carbonyl compound emissions from a diesel engine generator fueled with blends of n-butanol, biodiesel and diesel. Energy 90 (2015), 266–273.
122. Kalligeros, S., Zannikos, F., Stournas, S., Lois, E., Anastopoulos, G., Teas, C.H., et al. An investigation of using biodiesel/marine diesel blends on the performance of a stationary diesel engine. Biomass Bioenergy 24 (2003), 141–149.
123. Tan, P., Ruan, S., Hu, Z., Lou, D., Li, H., Particle number emissions from a light-duty diesel engine with biodiesel fuels under transient-state operating conditions. Appl Energy 113 (2014), 22–31.
124. Wang, W.G., Lyons, D.W., Clark, N.N., Gautam, M., Norton, P.M., Emissions from nine heavy trucks fueled by diesel and biodiesel blend without engine modification. Environ Sci Technol 34 (2000), 933–939.
125. Lapuerta, M., Armas, O., Rodriguez-Fernandez, J., Effect of biodiesel fuels on diesel engine emissions. Prog Energy Combust Sci 34 (2008), 198–223.
126. Korres, D.M., Karonis, D., Lois, E., Linck, M.B., Gupta, A.K., Aviation fuel JP-5 and biodiesel on a diesel engine. Fuel 87 (2008), 70–78.
127. Bueno, A.V., Pereira, M.P.B., de Oliveira Pontes, J.V., de Luna, F.M.T., Cavalcante, C.L. Jr, Performance and emissions characteristics of castor oil biodiesel fuel blends. Appl Therm Eng 125 (2017), 559–566.
128. Kathirvelu, B., Subramanian, S., Govindan, N., Santhanam, S., Emission characteristics of biodiesel obtained from jatropha seeds and fish wastes in a diesel engine. Sustain Environ Res 27 (2017), 283–290.
129. Canakci, M., Van Gerpen, J.H., Comparison of engine performance and emissions for petroleum diesel fuel, yellow grease biodiesel, and soybean oil biodiesel. Trans ASAE, 46, 2003, 937.
130. Shahir, V.K., Jawahar, C.P., Suresh, P.R., Comparative study of diesel and biodiesel on CI engine with emphasis to emissions-a review. Renew Sustain Energy Rev 45 (2015), 686–697.
131. Babu, D., Anand, R., Effect of biodiesel-diesel-n-pentanol and biodiesel-diesel-n-hexanol blends on diesel engine emission and combustion characteristics. Energy 133 (2017), 761–776.
132. Liu, H., Ma, X., Li, B., Chen, L., Wang, Z., Wang, J., Combustion and emission characteristics of a direct injection diesel engine fueled with biodiesel and PODE/biodiesel fuel blends. Fuel 209 (2017), 62–68.
133. Devarajan, Y., Munuswamy, D.B., Mahalingam, A., Performance, combustion and emission analysis on the effect of ferrofluid on neat biodiesel. Process Saf Environ Prot 111 (2017), 283–291.
134. Can, Ö., Öztürk, E., Yücesu, H.S., Combustion and exhaust emissions of canola biodiesel blends in a single cylinder DI diesel engine. Renew Energy 109 (2017), 73–82.
135. Agarwal, D., Sinha, S., Agarwal, A.K., Experimental investigation of control of NOx emissions in biodiesel-fueled compression ignition engine. Renew Energy 31 (2006), 2356–2369.
136. Shi, X., Yu, Y., He, H., Shuai, S., Wang, J., Li, R., Emission characteristics using methyl soyate-ethanol-diesel fuel blends on a diesel engine. Fuel 84 (2005), 1543–1549.
137. Tsolakis, A., Megaritis, A., Wyszynski, M.L., Theinnoi, K., Engine performance and emissions of a diesel engine operating on diesel-RME (rapeseed methyl ester) blends with EGR (exhaust gas recirculation). Energy 32 (2007), 2072–2080.
138. Zheng, M., Mulenga, M.C., Reader, G.T., Wang, M., Ting, D.S.K., Tjong, J., Biodiesel engine performance and emissions in low temperature combustion. Fuel 87 (2008), 714–722.
139. Shi, X., Liu, B., Zhang, C., Hu, J., Zeng, Q., A study on combined effect of high EGR rate and biodiesel on combustion and emission performance of a diesel engine. Appl Therm Eng 125 (2017), 1272–1279.
140. Banapurmath, N.R., Tewari, P.G., Gaitonde, V.N., Experimental investigations on performance and emission characteristics of Honge oil biodiesel (HOME) operated compression ignition engine. Renew Energy 48 (2012), 193–201.
141. Hwang, J., Qi, D., Jung, Y., Bae, C., Effect of injection parameters on the combustion and emission characteristics in a common-rail direct injection diesel engine fueled with waste cooking oil biodiesel. Renew Energy 63 (2014), 9–17.
142. Xue, J., Grift, T.E., Hansen, A.C., Effect of biodiesel on engine performances and emissions. Renew Sustain Energy Rev 15 (2011), 1098–1116.
143. Prabu, S.S., Asokan, M.A., Roy, R., Francis, S., Sreelekh, M.K., Performance, combustion and emission characteristics of diesel engine fuelled with waste cooking oil bio-diesel/diesel blends with additives. Energy 122 (2017), 638–648.
144. Yang, P.M., Lin, K.C., Lin, Y.C., Jhang, S.R., Chen, S.C., Emission evaluation of a diesel engine generator operating with a proportion of isobutanol as a fuel additive in biodiesel blends. Appl Therm Eng 100 (2016), 628–635.
145. Zheng, Z., Wang, X., Zhong, X., Hu, B., Liu, H., Yao, M., Experimental study on the combustion and emissions fueling biodiesel/n-butanol, biodiesel/ethanol and biodiesel/2, 5-dimethylfuran on a diesel engine. Energy 115 (2016), 539–549.
146. Keskin, A., Gürü M., Altıparmak, D., Influence of tall oil biodiesel with Mg and Mo based fuel additives on diesel engine performance and emission. Bioresour Technol 99 (2008), 6434–6438.
147. Vedharaj, S., Vallinayagam, R., Yang, W.M., Chou, S.K., Lee, P.S., Effect of adding 1, 4-Dioxane with kapok biodiesel on the characteristics of a diesel engine. Appl Energy 136 (2014), 1166–1173.
148. Imdadul, H.K., Masjuki, H.H., Kalam, M.A., Zulkifli, N.W.M., Alabdulkarem, A., Rashed, M.M., et al. Influences of ignition improver additive on ternary (diesel-biodiesel-higher alcohol) blends thermal stability and diesel engine performance. Energy Convers Manage 123 (2016), 252–264.
149. Prabakaran, B., Udhoji, A., Experimental investigation into effects of addition of zinc oxide on performance, combustion and emission characteristics of diesel-biodiesel-ethanol blends in CI engine. Alexandria Eng J 55 (2016), 3355–3362.
150. Imdadul, H.K., Masjuki, H.H., Kalam, M.A., Zulkifli, N.W.M., Kamruzzaman, M., Shahin, M.M., et al. Evaluation of oxygenated n-butanol-biodiesel blends along with ethyl hexyl nitrate as cetane improver on diesel engine attributes. J Clean Prod 141 (2017), 928–939.
151. Rashed, M.M., Kalam, M.A., Masjuki, H.H., Habibullah, M., Imdadul, H.K., Shahin, M.M., et al. Improving oxidation stability and NO X reduction of biodiesel blends using aromatic and synthetic antioxidant in a light duty diesel engine. Ind Crops Prod 89 (2016), 273–284.
152. Pérez, N., Pey, J., Querol, X., Alastuey, A., López, J.M., Viana, M., Partitioning of major and trace components in PM 10-PM 2.5-PM 1 at an urban site in Southern Europe. Atmos Environ 42 (2008), 1677–1691.
153. Imdadul, H.K., Masjuki, H.H., Kalam, M.A., Zulkifli, N.W.M., Alabdulkarem, A., Rashed, M.M., et al. Higher alcohol-biodiesel-diesel blends: an approach for improving the performance, emission, and combustion of a light-duty diesel engine. Energy Convers Manage 111 (2016), 174–185.
154. Rakopoulos, D.C., Combustion and emissions of cottonseed oil and its bio-diesel in blends with either n-butanol or diethyl ether in HSDI diesel engine. Fuel 105 (2013), 603–613.
155. Arbab, M.I., Varman, M., Masjuki, H.H., Kalam, M.A., Imtenan, S., Sajjad, H., et al. Evaluation of combustion, performance, and emissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine. Energy Convers Manage 90 (2015), 111–120.
156. Rakopoulos, C.D., Antonopoulos, K.A., Rakopoulos, D.C., Hountalas, D.T., Andritsakis, E.C., Study of the performance and emissions of a high-speed direct injection diesel engine operating on ethanoldiesel fuel blends. Int J Altern Propuls 1 (2007), 309–324.
157. Fattah, I.M.R., Masjuki, H.H., Kalam, M.A., Hazrat, M.A., Masum, B.M., Imtenan, S., et al. Effect of antioxidants on oxidation stability of biodiesel derived from vegetable and animal based feedstocks. Renew Sustain Energy Rev 30 (2014), 356–370.
158. Yuvarajan, D., Ramanan, M.V., Effect of magnetite ferrofluid on the performance and emissions characteristics of diesel engine using methyl esters of mustard oil. Arab J Sci Eng 41 (2016), 2023–2030.
159. Imdadul, H.K., Masjuki, H.H., Kalam, M.A., Zulkifli, N.W.M., Alabdulkarem, A., Kamruzzaman, M., et al. A comparative study of C 4 and C 5 alcohol treated diesel-biodiesel blends in terms of diesel engine performance and exhaust emission. Fuel 179 (2016), 281–288.
160. Hoekman, S.K., Robbins, C., Review of the effects of biodiesel on NOx emissions. Fuel Process Technol 96 (2012), 237–249.
161. Zareh, P., Zare, A.A., Ghobadian, B., Comparative assessment of performance and emission characteristics of castor, coconut and waste cooking based biodiesel as fuel in a diesel engine. Energy 139 (2017), 883–894.
162. Alptekin, E., Emission, injection and combustion characteristics of biodiesel and oxygenated fuel blends in a common rail diesel engine. Energy 119 (2017), 44–52.
163. Gharehghani, A., Mirsalim, M., Hosseini, R., Effects of waste fish oil biodiesel on diesel engine combustion characteristics and emission. Renew Energy 101 (2017), 930–936.
164. Alloune, R., Balistrou, M., Awad, S., Loubar, K., Tazerout, M., Performance, combustion and exhaust emissions characteristics investigation using Citrullus colocynthis L. biodiesel in DI diesel engine. J Energy Inst, 2017.
165. Monirul, I.M., Masjuki, H.H., Kalam, M.A., Mosarof, M.H., Zulkifli, N.W.M., Teoh, Y.H., et al. Assessment of performance, emission and combustion characteristics of palm, jatropha and Calophyllum inophyllum biodiesel blends. Fuel 181 (2016), 985–995.
166. Man, X.J., Cheung, C.S., Ning, Z., Wei, L., Huang, Z.H., Influence of engine load and speed on regulated and unregulated emissions of a diesel engine fueled with diesel fuel blended with waste cooking oil biodiesel. Fuel 180 (2016), 41–49.
167. Sanjid, A., Kalam, M.A., Masjuki, H.H., Varman, M., Zulkifli, N.W.B.M., Abedin, M.J., Performance and emission of multi-cylinder diesel engine using biodiesel blends obtained from mixed inedible feedstocks. J Clean Prod 112 (2016), 4114–4122.
168. Nalgundwar, A., Paul, B., Sharma, S.K., Comparison of performance and emissions characteristics of DI CI engine fueled with dual biodiesel blends of palm and jatropha. Fuel 173 (2016), 172–179.
169. Mosarof, M.H., Kalam, M.A., Masjuki, H.H., Alabdulkarem, A., Ashraful, A.M., Arslan, A., et al. Optimization of performance, emission, friction and wear characteristics of palm and Calophyllum inophyllum biodiesel blends. Energy Convers Manag 118 (2016), 119–134.
170. Aydın, H., Scrutinizing the combustion, performance and emissions of safflower biodiesel-kerosene fueled diesel engine used as power source for a generator. Energy Convers Manage 117 (2016), 400–409.
171. Özçelik, A.E., Aydoğan, H., Acaroğlu, M., Determining the performance, emission and combustion properties of camelina biodiesel blends. Energy Convers Manage 96 (2015), 47–57.
172. Tan, P., Hu, Z., Lou, D., Li, Z., Exhaust emissions from a light-duty diesel engine with Jatropha biodiesel fuel. Energy 39 (2012), 356–362.
173. Altaie, M.A.H., Janius, R.B., Rashid, U., Taufiq-Yap, Y.H., Yunus, R., Zakaria, R., et al. Performance and exhaust emission characteristics of direct-injection diesel engine fueled with enriched biodiesel. Energy Convers Manage 106 (2015), 365–372.
174. Rashed, M.M., Kalam, M.A., Masjuki, H.H., Mofijur, M., Rasul, M.G., Zulkifli, N.W.M., Performance and emission characteristics of a diesel engine fueled with palm, jatropha, and moringa oil methyl ester. Ind Crops Prod 79 (2016), 70–76.
175. How, H.G., Masjuki, H.H., Kalam, M.A., Teoh, Y.H., An investigation of the engine performance, emissions and combustion characteristics of coconut biodiesel in a high-pressure common-rail diesel engine. Energy 69 (2014), 749–759.
176. Chen, H., Guo, Q., Zhao, X., Xu, M., Ma, Y., Influence of fuel temperature on combustion and emission of biodiesel. J Energy Inst 89 (2016), 231–239.
177. Nair, J.N., Kaviti, A.K., Daram, A.K., Analysis of performance and emission on compression ignition engine fuelled with blends of neem biodiesel. Egypt J Pet, 2016.
178. Al-lwayzy, S.H., Yusaf, T., Diesel engine performance and exhaust gas emissions using Microalgae Chlorella protothecoides biodiesel. Renew Energy 101 (2017), 690–701.
179. Murugan, S., Ramaswamy, M.C., Nagarajan, G., A comparative study on the performance, emission and combustion studies of a DI diesel engine using distilled tyre pyrolysis oil-diesel blends. Fuel 87 (2008), 2111–2121.
180. Hellier, P., Ladommatos, N., Yusaf, T., The influence of straight vegetable oil fatty acid composition on compression ignition combustion and emissions. Fuel 143 (2015), 131–143.
181. Hosseini, S.H., Taghizadeh-Alisaraei, A., Ghobadian, B., Abbaszadeh-Mayvan, A., Performance and emission characteristics of a CI engine fuelled with carbon nanotubes and diesel-biodiesel blends. Renew Energy 111 (2017), 201–213.
182. Aydin, H., Ilkiliç C., Exhaust emissions of a CI engine operated with biodiesel from rapeseed oil. Energy Sources, Part A Recover Util Environ Eff 33 (2011), 1523–1531.
183. Sahoo, P.K., Das, L.M., Babu, M.K.G., Naik, S.N., Biodiesel development from high acid value polanga seed oil and performance evaluation in a CI engine. Fuel 86 (2007), 448–454.
184. Alptekin, E., Canakci, M., Ozsezen, A.N., Turkcan, A., Sanli, H., Using waste animal fat based biodiesels-bioethanol-diesel fuel blends in a DI diesel engine. Fuel 157 (2015), 245–254.
185. Sakthivel, R., Ramesh, K., Purnachandran, R., Shameer PM. A review on the properties, performance and emission aspects of the third generation biodiesels. Renew Sustain Energy Rev, 2017.
186. Musthafa, M.M., Development of performance and emission characteristics on coated diesel engine fuelled by biodiesel with Cetane number enhancing additive. Energy, 2017.
187. Raheman, H., Ghadge, S.V., Performance of compression ignition engine with mahua (Madhuca indica) biodiesel. Fuel 86 (2007), 2568–2573.
188. Hoseini, S.S., Najafi, G., Ghobadian, B., Rahimi, A., Yusaf, T., Mamat, R., et al. Effects of biodiesel fuel obtained from Salviamacrosiphon oil (ultrasonic-assisted) on performance and emissions of diesel engine. Energy 131 (2017), 289–296.
189. Ruhul, M.A., Abedin, M.J., Rahman, S.M.A., Masjuki, B.H.H., Alabdulkarem, A., Kalam, M.A., et al. Impact of fatty acid composition and physicochemical properties of Jatropha and Alexandrian laurel biodiesel blends: An analysis of performance and emission characteristics. J Clean Prod 133 (2016), 1181–1189.
190. Pulkrabek, W.W., Thermochemistry and fuels. Eng Fundam Intern Combust Engine, 2004, 168–169.
191. Gnanasekaran, S., Saravanan, N., Ilangkumaran, M., Influence of injection timing on performance, emission and combustion characteristics of a DI diesel engine running on fish oil biodiesel. Energy 116 (2016), 1218–1229.
192. Szybist, J.P., Boehman, A.L., Behavior of a diesel injection system with biodiesel fuel. SAE Technical Paper, 2003.
193. Tat ME, Van Gerpen JH, Wang PS. Fuel property effects on injection timing, ignition timing and oxides of nitrogen emissions from biodiesel-fueled engines. 2004 ASAE Annu. Meet., American Society of Agricultural and Biological Engineers; 2004. p. 1.
194. Bhaskar, K., Nagarajan, G., Sampath, S., Optimization of FOME (fish oil methyl esters) blend and EGR (exhaust gas recirculation) for simultaneous control of NO x and particulate matter emissions in diesel engines. Energy 62 (2013), 224–234.
195. Hosseini, S.H., Taghizadeh-Alisaraei, A., Ghobadian, B., Abbaszadeh-Mayvan, A., Effect of added alumina as nano-catalyst to diesel-biodiesel blends on performance and emission characteristics of CI engine. Energy 124 (2017), 543–552.
196. Tüccar, G., Tosun, E., Özgür, T., Aydın, K., Diesel engine emissions and performance from blends of citrus sinensis biodiesel and diesel fuel. Fuel 132 (2014), 7–11.
197. Pradeep, V., Sharma, R.P., Use of HOT EGR for NOx control in a compression ignition engine fuelled with bio-diesel from Jatropha oil. Renew Energy 32 (2007), 1136–1154.
198. Saleh, H.E., Experimental study on diesel engine nitrogen oxide reduction running with jojoba methyl ester by exhaust gas recirculation. Fuel 88 (2009), 1357–1364.
199. Agarwal, A.K., Dhar, A., Gupta, J.G., Il, Kim W, Choi, K., Lee, C.S., et al. Effect of fuel injection pressure and injection timing of Karanja biodiesel blends on fuel spray, engine performance, emissions and combustion characteristics. Energy Convers Manage 91 (2015), 302–314.
200. An, H., Yang, W.M., Li, J., Zhou, D.Z., Modeling analysis of urea direct injection on the NOx emission reduction of biodiesel fueled diesel engines. Energy Convers Manage 101 (2015), 442–449.
201. Roh, H.G., Lee, D., Lee, C.S., Impact of DME-biodiesel, diesel-biodiesel and diesel fuels on the combustion and emission reduction characteristics of a CI engine according to pilot and single injection strategies. J Energy Inst 88 (2015), 376–385.
202. Qi, D., Leick, M., Liu, Y., Chia-fon, F.L., Effect of EGR and injection timing on combustion and emission characteristics of split injection strategy DI-diesel engine fueled with biodiesel. Fuel 90 (2011), 1884–1891.
203. Goldsborough, S.S., Johnson, M.V., Banyon, C., Pitz, W.J., McNenly, M.J., Experimental and modeling study of fuel interactions with an alkyl nitrate cetane enhancer, 2-ethyl-hexyl nitrate. Proc Combust Inst 35 (2015), 571–579.
204. Ramadhas, A.S., Muraleedharan, C., Jayaraj, S., Performance and emission evaluation of a diesel engine fueled with methyl esters of rubber seed oil. Renew Energy 30 (2005), 1789–1800.
205. Reed K. Inventor; Cerion Tech Inc, assignee, Cerium dioxide nanoparticle-containing fuel additive, United States patent application US 13/662,511; 2013.
206. Scattergood R. inventor; Oxonica Ltd, assignee. Cerium oxide nanoparticles as fuel additives. United States patent application US 10/542,770; 2006.
207. Basha, J.S., Anand, R.B., Performance, emission and combustion characteristics of a diesel engine using carbon nanotubes blended jatropha methyl ester emulsions. Alexandria Eng J 53 (2014), 259–273.
208. Ashok, B., Nanthagopal, K., Mohan, A., Johny, A., Tamilarasu, A., Comparative analysis on the effect of zinc oxide and ethanox as additives with biodiesel in CI engine. Energy 140 (2017), 352–364.
209. Bhuiyan, M.H.U., Saidur, R., Mostafizur, R.M., Mahbubul, I.M., Amalina, M.A., Experimental investigation on surface tension of metal oxide-water nanofluids. Int Commun Heat Mass Transf 65 (2015), 82–88.
210. Ahmari, H., Amiri, M.C., On the relationship between surface tension and viscosity of fluids. Chem Eng Res Bull 18 (2016), 18–22.
211. Kuzhiyil, N., Kong, S.-C., Energy recovery from waste plastics by using blends of biodiesel and polystyrene in diesel engines. Energy Fuels 23 (2009), 3246–3253.
212. Suh, H.K., Yoon, S.H., Lee, C.S., Effect of multiple injection strategies on the spray atomization and reduction of exhaust emissions in a compression ignition engine fueled with dimethyl ether (DME). Energy Fuels 24 (2010), 1323–1332.
213. Patel, R.L., Sankhavara, C.D., Biodiesel production from Karanja oil and its use in diesel engine: A review. Renew Sustain Energy Rev, 2016.
214. Ashok, B., Nanthagopal, K., Jeevanantham, A.K., Bhowmick, P., Malhotra, D., Agarwal, P., An assessment of Calophyllum inophyllum biodiesel fuelled diesel engine characteristics using novel antioxidant additives. Energy Convers Manage 148 (2017), 935–943.
215. Roy, M.M., Calder, J., Wang, W., Mangad, A., Diniz, F.C.M., Emission analysis of a modern Tier 4 DI diesel engine fueled by biodiesel-diesel blends with a cold flow improver (Wintron Synergy) at multiple idling conditions. Appl Energy 179 (2016), 45–54.
216. Ashraful, A.M., Masjuki, H.H., Kalam, M.A., Rashedul, H.K., Sajjad, H., Abedin, M.J., Influence of anti-corrosion additive on the performance, emission and engine component wear characteristics of an IDI diesel engine fueled with palm biodiesel. Energy Convers Manage 87 (2014), 48–57.
217. Velmurugan, K., Sathiyagnanam, A.P., Impact of antioxidants on NOx emissions from a mango seed biodiesel powered DI diesel engine. Alexandria Eng J 55 (2016), 715–722.
218. Perumal, V., Ilangkumaran, M., Experimental analysis of engine performance, combustion and emission using pongamia biodiesel as fuel in CI engine. Energy 129 (2017), 228–236.
219. Celik, M., Özgören, Y.Ö., The determination of effects of soybean and hazelnut methyl ester addition to the diesel fuel on the engine performance and exhaust emissions. Appl Therm Eng, 2017.
220. Mofijur, M., Masjuki, H.H., Kalam, M.A., Atabani, A.E., Fattah, I.M.R., Mobarak, H.M., Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine. Ind Crops Prod 53 (2014), 78–84.
221. Mofijur, M., Masjuki, H.H., Kalam, M.A., Atabani, A.E., Evaluation of biodiesel blending, engine performance and emissions characteristics of Jatropha curcas methyl ester: Malaysian perspective. Energy 55 (2013), 879–887.
222. Mofijur, M., Masjuki, H.H., Kalam, M.A., Atabani, A.E., Arbab, M.I., Cheng, S.F., et al. Properties and use of Moringa oleifera biodiesel and diesel fuel blends in a multi-cylinder diesel engine. Energy Convers Manage 82 (2014), 169–176.
223. Valente, O.S., Da Silva, M.J., Pasa, V.M.D., Belchior, C.R.P., Sodré J.R., Fuel consumption and emissions from a diesel power generator fuelled with castor oil and soybean biodiesel. Fuel 89 (2010), 3637–3642.
224. Gumus, M., Sayin, C., Canakci, M., The impact of fuel injection pressure on the exhaust emissions of a direct injection diesel engine fueled with biodiesel-diesel fuel blends. Fuel 95 (2012), 486–494.
225. Kaisan, M.U., Anafi, F.O., Nuszkowski, J., Kulla, D.M., Umaru, S., Exhaust emissions of biodiesel binary and multi-blends from Cotton, Jatropha and Neem oil from stationary multi cylinder CI engine. Transp Res Part D Transp Environ 53 (2017), 403–414.
226. Lin, C.Y., Lin, H.A., Diesel engine performance and emission characteristics of biodiesel produced by the peroxidation process. Fuel 85 (2006), 298–305.
227. Pinzi, S., Rounce, P., Herreros, J.M., Tsolakis, A., Dorado, M.P., The effect of biodiesel fatty acid composition on combustion and diesel engine exhaust emissions. Fuel 104 (2013), 170–182.
228. Zhu, L., Cheung, C.S., Huang, Z., A comparison of particulate emission for rapeseed oil methyl ester, palm oil methyl ester and soybean oil methyl ester in perspective of their fatty ester composition. Appl Therm Eng 94 (2016), 249–255.
229. Yilmaz, N., Atmanli, A., Experimental assessment of a diesel engine fueled with diesel-biodiesel-1-pentanol blends. Fuel 191 (2017), 190–197.
230. Al-Hasan, M., Effect of ethanol-unleaded gasoline blends on engine performance and exhaust emission. Energy Convers Manage 44 (2003), 1547–1561.
231. Qi, D.H., Chen, H., Geng, L.M., Bian, Y.Z.H., Experimental studies on the combustion characteristics and performance of a direct injection engine fueled with biodiesel/diesel blends. Energy Convers Manage 51 (2010), 2985–2992.
232. Canakci, M., An experimental study for the effects of boost pressure on the performance and exhaust emissions of a DI-HCCI gasoline engine. Fuel 87 (2008), 1503–1514.
233. Yasin, M.H.M., Yusaf, T., Mamat, R., Yusop, A.F., Characterization of a diesel engine operating with a small proportion of methanol as a fuel additive in biodiesel blend. Appl Energy 114 (2014), 865–873.
234. Imtenan, S., Masjuki, H.H., Varman, M., Kalam, M.A., Arbab, M.I., Sajjad, H., et al. Impact of oxygenated additives to palm and jatropha biodiesel blends in the context of performance and emissions characteristics of a light-duty diesel engine. Energy Convers Manage 83 (2014), 149–158.
235. Yilmaz, N., Atmanli, A., Trujillo, M., Influence of 1-pentanol additive on the performance of a diesel engine fueled with waste oil methyl ester and diesel fuel. Fuel 207 (2017), 461–469.
236. Huang, S., Deng, P., Huang, R., Wang, Z., Ma, Y., Dai, H., Visualization research on spray atomization, evaporation and combustion processes of ethanol-diesel blend under LTC conditions. Energy Convers Manage 106 (2015), 911–920.
237. Ickes, A.M., Bohac, S.V., Assanis, D.N., Effect of fuel cetane number on a premixed diesel combustion mode. Int J Engine Res 10 (2009), 251–263.
238. Rahmanian, B., Safaei, M.R., Kazi, S.N., Ahmadi, G., Oztop, H.F., Vafai, K., Investigation of pollutant reduction by simulation of turbulent non-premixed pulverized coal combustion. Appl Therm Eng 73 (2014), 1222–1235.
239. Yuvarajan, D., Babu, M.D., BeemKumar, N., Kishore, P.A., Experimental investigation on the influence of titanium dioxide nanofluid on emission pattern of biodiesel in a diesel engine. Atmos Pollut Res 9 (2018), 47–52.
240. Fattah, I.M.R., Masjuki, H.H., Kalam, M.A., Wakil, M.A., Rashedul, H.K., Abedin, M.J., Performance and emission characteristics of a CI engine fueled with Cocos nucifera and Jatropha curcas B20 blends accompanying antioxidants. Ind Crops Prod 57 (2014), 132–140.
241. Sharma, A., Murugan, S., Effect of blending waste tyre derived fuel on oxidation stability of biodiesel and performance and emission studies of a diesel engine. Appl Therm Eng 118 (2017), 365–374.
242. Atabani, A.E., Mofijur, M., Masjuki, H.H., Badruddin, I.A., Kalam, M.A., Chong, W.T., Effect of Croton megalocarpus, Calophyllum inophyllum, Moringa oleifera, palm and coconut biodiesel-diesel blending on their physico-chemical properties. Ind Crops Prod 60 (2014), 130–137.
243. Northrop, W.F., Madathil, P.V., Bohac, S.V., Assanis, D.N., Condensational growth of particulate matter from partially premixed low temperature combustion of biodiesel in a compression ignition engine. Aerosol Sci Technol 45 (2011), 26–36.
244. Can, Ö., Combustion characteristics, performance and exhaust emissions of a diesel engine fueled with a waste cooking oil biodiesel mixture. Energy Convers Manage 87 (2014), 676–686.
245. Li, L., Wang, J., Wang, Z., Xiao, J., Combustion and emission characteristics of diesel engine fueled with diesel/biodiesel/pentanol fuel blends. Fuel 156 (2015), 211–218.
246. Yilmaz, N., Comparative analysis of biodiesel-ethanol-diesel and biodiesel-methanol-diesel blends in a diesel engine. Energy 40 (2012), 210–213.
247. Chauhan, B.S., Kumar, N., Du Jun, Y., Lee, K.B., Performance and emission study of preheated Jatropha oil on medium capacity diesel engine. Energy 35 (2010), 2484–2492.
248. Sanli, H., Canakci, M., Alptekin, E., Turkcan, A., Ozsezen, A.N., Effects of waste frying oil based methyl and ethyl ester biodiesel fuels on the performance, combustion and emission characteristics of a DI diesel engine. Fuel 159 (2015), 179–187.
249. Guarieiro, L.L.N., de Almeida Guerreiro, E.T., dos Santos Amparo, K.K., Manera, V.B., Regis, A.C.D., Santos, A.G., et al. Assessment of the use of oxygenated fuels on emissions and performance of a diesel engine. Microchem J 117 (2014), 94–99.
250. Pulkrabek, W.W., Engineering fundamentals of the internal combustion engine. 2014, Pearson Prentice Hall Upper Saddle River, NJ.
251. Daho, T., Vaitilingom, G., Ouiminga, S.K., Piriou, B., Zongo, A.S., Ouoba, S., et al. Influence of engine load and fuel droplet size on performance of a CI engine fueled with cottonseed oil and its blends with diesel fuel. Appl Energy 111 (2013), 1046–1053.
252. Pillay, A.E., Fok, S.C., Elkadi, M., Stephen, S., Manuel, J., Khan, M.Z., et al. Engine emissions and performances with alternative biodiesels: A review. J Sustain Dev, 5, 2012, 59.
253. Chong, C.T., Ng, J.-H., Ahmad, S., Rajoo, S., Oxygenated palm biodiesel: ignition, combustion and emissions quantification in a light-duty diesel engine. Energy Convers Manage 101 (2015), 317–325.
254. Kinoshita, E., Myo, T., Hamasaki, K., Nishi, S., Combustion characteristics of diesel engine with coconut oil ethyl ester. SAE Technical Paper, 2007.
255. Yamin, J.A.A., Gupta, H.N., Bansal, B.B., Srivastava, O.N., Effect of combustion duration on the performance and emission characteristics of a spark ignition engine using hydrogen as a fuel. Int J Hydrogen Energy 25 (2000), 581–589.
256. Reis, P.M., Silva, J.A.L., Palavra, A.F., Fraústo da Silva, J.J.R., Kitamura, T., Fujiwara, Y., et al. Pot conversion of methane into acetic acid in the absence of CO and with vanadium catalysts such as Amavadine. Angew Chemie 115 (2003), 845–847.
257. Zheng, G., Jiang, J., Wu, Y., Zhang, R., Hou, H., The mutual conversion of CO2 and CO in dielectric barrier discharge (DBD). Plasma Chem Plasma Process 23 (2003), 59–68.
258. Keskin, A., Gürü M., Alt parmak, D., Influence of metallic based fuel additives on performance and exhaust emissions of diesel engine. Energy Convers Manage 52 (2011), 60–65.
259. Ch opek, Z., Darkowski, A., Piaseczny, L., The influence of metalloorganic fuel additives on CI engine emission. Polish J Environ Stud, 2005, 14.
260. Gürü M, Karakaya U ur, Alt parmak D, Al c lar A. Improvement of diesel fuel properties by using additives. Energy Convers Manag 2002;43:1021–5.
261. Zeller HW, Westphal TE. Effectiveness of Iron-based Fuel Additives on Diesel Soot Control. US Department of the Interior, Bureau of Mines; 1992.
262. May, W.R., Hirs, E.A., Catalyst for improving the combustion efficiency of petroleum fuels in diesel engines. 11th diesel engine Emiss. Reduct Conf, 2005, 1–16.
263. Jung, H., Kittelson, D.B., Zachariah, M.R., The influence of a cerium additive on ultrafine diesel particle emissions and kinetics of oxidation. Combust Flame 142 (2005), 276–288.
264. Caton, J.A., Ruemmele, W.P., Kelso, D.T., Epperly, W.R., Performance and fuel consumption of a single-cylinder, direct-injection diesel engine using a platinum fuel additive. SAE Trans, 1991, 46–56.
265. Cheung, C.S., Zhu, L., Huang, Z., Regulated and unregulated emissions from a diesel engine fueled with biodiesel and biodiesel blended with methanol. Atmos Environ 43 (2009), 4865–4872.
266. Parikh, H.B., Prajapati, V.M., Thakkar, K.H., Performance evaluation and emission analysis of 4-S, IC engine using ethanol bio-diesel blended with diesel fuel. Int J Res Eng Technol 2 (2013), 465–469.
267. Zheng, M., Li, T., Han, X., Direct injection of neat n-butanol for enabling clean low temperature combustion in a modern diesel engine. Fuel 142 (2015), 28–37.
268. Fayyazbakhsh, A., Pirouzfar, V., Comprehensive overview on diesel additives to reduce emissions, enhance fuel properties and improve engine performance. Renew Sustain Energy Rev 74 (2017), 891–901.
269. Fischer, A., Oehm, C., Selle, M., Werner, P., Biotic and abiotic transformations of methyl tertiary butyl ether (MTBE)*(6 pp). Environ Sci Pollut Res 12 (2005), 381–386.
270. Farkade, H.S., Pathre, A.P., Experimental investigation of methanol, ethanol and butanol blends with gasoline on SI engine. Int J Emerg Technol Adv Eng 2 (2012), 205–215.
271. Coniglio, L., Bennadji, H., Glaude, P.A., Herbinet, O., Billaud, F., Combustion chemical kinetics of biodiesel and related compounds (methyl and ethyl esters): experiments and modeling-advances and future refinements. Prog Energy Combust Sci 39 (2013), 340–382.
272. Wang, X., Cheung, C.S., Di, Y., Huang, Z., Diesel engine gaseous and particle emissions fueled with diesel-oxygenate blends. Fuel 94 (2012), 317–323.
273. Christensen, E., McCormick, R.L., Long-term storage stability of biodiesel and biodiesel blends. Fuel Process Technol 128 (2014), 339–348.
274. Sulistyo, H., Almeida, M.F., Dias, J.M., Influence of synthetic antioxidants on the oxidation stability of biodiesel produced from acid raw Jatropha curcas oil. Fuel Process Technol 132 (2015), 133–138.
275. Ileri, E., Koçar, G., Effects of antioxidant additives on engine performance and exhaust emissions of a diesel engine fueled with canola oil methyl ester-diesel blend. Energy Convers Manage 76 (2013), 145–154.
276. Gumus, M., Kasifoglu, S., Performance and emission evaluation of a compression ignition engine using a biodiesel (apricot seed kernel oil methyl ester) and its blends with diesel fuel. Biomass Bioenergy 34 (2010), 134–139.
277. Hazar, H., Aydin, H., Performance and emission evaluation of a CI engine fueled with preheated raw rapeseed oil (RRO)-diesel blends. Appl Energy 87 (2010), 786–790.
278. Rajaeifar, M.A., Abdi, R., Tabatabaei, M., Expanded polystyrene waste application for improving biodiesel environmental performance parameters from life cycle assessment point of view. Renew Sustain Energy Rev 74 (2017), 278–298.
279. Chiu, C.-W., Schumacher, L.G., Suppes, G.J., Impact of cold flow improvers on soybean biodiesel blend. Biomass Bioenergy 27 (2004), 485–491.
280. Couet J, Maehling F-O, Koschabek R, Kuenzel S. Use of cold flow improver compositions for fuels, blends thereof with biofuels and formulations thereof 2015.
281. Batt RJ, McMillan JA, Bradbury IP. Lubricity additives-performance and no-harm effects in low sulfur fuels. SAE Technical Paper; 1996.
282. Racha A, Thota C, Gokak DTS, Gajbhiye VK, Bhargava S. Fuel composition as lubricity improver and method thereof 2018.
283. Atmanli, A., Effects of a cetane improver on fuel properties and engine characteristics of a diesel engine fueled with the blends of diesel, hazelnut oil and higher carbon alcohol. Fuel 172 (2016), 209–217.
284. Lü X cai, Yang J guang, Zhang W gao, Huang Z. Improving the combustion and emissions of direct injection compression ignition engines using oxygenated fuel additives combined with a cetane number improver. Energy & Fuels 2005;19:1879–88.
285. Li, R., Wang, Z., Ni, P., Zhao, Y., Li, M., Li, L., Effects of cetane number improvers on the performance of diesel engine fuelled with methanol/biodiesel blend. Fuel 128 (2014), 180–187.
286. Gumus, S., Ozcan, H., Ozbey, M., Topaloglu, B., Aluminum oxide and copper oxide nanodiesel fuel properties and usage in a compression ignition engine. Fuel 163 (2016), 80–87.
287. Jiaqiang, E., Zhang, Z., Chen, J., Pham, M., Zhao, X., Peng, Q., et al. Performance and emission evaluation of a marine diesel engine fueled by water biodiesel-diesel emulsion blends with a fuel additive of a cerium oxide nanoparticle. Energy Convers Manage 169 (2018), 194–205.
288. Özgür, T., Özcanli, M., Aydin, K., Investigation of nanoparticle additives to biodiesel for improvement of the performance and exhaust emissions in a compression ignition engine. Int J Green Energy 12 (2015), 51–56.
289. Mohammadi, P., Nikbakht, A.M., Tabatabaei, M., Farhadi, K., Mohebbi, A., Experimental investigation of performance and emission characteristics of DI diesel engine fueled with polymer waste dissolved in biodiesel-blended diesel fuel. Energy 46 (2012), 596–605.
290. Tosun, E., Yilmaz, A.C., Ozcanli, M., Aydin, K., Determination of effects of various alcohol additions into peanut methyl ester on performance and emission characteristics of a compression ignition engine. Fuel 126 (2014), 38–43.
291. Ahanchi, M., Tabatabaei, M., Aghbashlo, M., Rezaei, K., Talebi, F., Ghaffari, A., et al. Pistachio (Pistachia vera) wastes valorization: enhancement of biodiesel oxidation stability using hull extracts of different varieties. J Clean Prod, 2018.
292. Vinukumar, K., Azhagurajan, A., Vettivel, S.C., Vedaraman, N., Lenin, A.H., Biodiesel with nano additives from coconut shell for decreasing emissions in diesel engines. Fuel 222 (2018), 180–184.
293. Vinukumar, K., Azhagurajan, A., Vettivel, S.C., Vedaraman, N., Rice husk as nanoadditive in diesel-biodiesel fuel blends used in diesel engine. J Therm Anal Calorim 131 (2018), 1333–1343.
294. Rahimi, V., Karimi, K., Shafiei, M., Naghavi, R., Khoshnevisan, B., Ghanavati, H., et al. Well-to-wheel life cycle assessment of Eruca Sativa-based biorefinery. Renew Energy 117 (2018), 135–149.
295. Rocha, M.H., Capaz, R.S., Lora, E.E.S., Nogueira, L.A.H., Leme, M.M.V., Renó M.L.G., et al. Life cycle assessment (LCA) for biofuels in Brazilian conditions: a meta-analysis. Renew Sustain Energy Rev 37 (2014), 435–459.
296. Møller, F., Slentø E., Frederiksen, P., Integrated well-to-wheel assessment of biofuels combining energy and emission LCA and welfare economic cost benefit analysis. Biomass Bioenergy 60 (2014), 41–49.
297. Cherubini, F., Bird, N.D., Cowie, A., Jungmeier, G., Schlamadinger, B., Woess-Gallasch, S., Energy-and greenhouse gas-based LCA of biofuel and bioenergy systems: Key issues, ranges and recommendations. Resour Conserv Recycl 53 (2009), 434–447.
298. Gnansounou, E., Dauriat, A., Villegas, J., Panichelli, L., Life cycle assessment of biofuels: energy and greenhouse gas balances. Bioresour Technol 100 (2009), 4919–4930.
299. ISO. 14040 International standard, Environmental management-life cycle assessment-principles and framework. 2006, International Organisation for Standardization, Geneva, Switzerland.
300. ISO. 14044 International standard, Environmental management-life cycle assessment-principles and framework. 2006, International Organisation for Standardization, Geneva, Switzerland.
301. Chiaramonti, D., Recchia, L., Is life cycle assessment (LCA) a suitable method for quantitative CO 2 saving estimations? The impact of field input on the LCA results for a pure vegetable oil chain. Biomass Bioenergy 34 (2010), 787–797.
302. Mauderly, J.L., Burnett, R.T., Castillejos, M., Özkaynak, H., Samet, J.M., Stieb, D.M., et al. Is the air pollution health research community prepared to support a multipollutant air quality management framework?. Inhal Toxicol 22 (2010), 1–19.
303. Larcombe, A.N., Kicic, A., Mullins, B.J., Knothe, G., Biodiesel exhaust: The need for a systematic approach to health effects research. Respirology 20 (2015), 1034–1045.
304. Anderson, A., Devarajan, Y., Nagappan, B., Effect of injection parameters on the reduction of NOx emission in neat bio-diesel fuelled diesel engine. Energy Sources, Part A Recover Util Environ Eff 40 (2018), 186–192.
305. Kumar, S., Kumar, R., Kumar, M., Experimental investigations of oxidation stability of biodiesel produced from Prunus armeniaca oil (apricot oil) and effect of various antioxidants on stability, engine performance and emissions. Fuel 216 (2018), 861–869.
306. Mofijur M, Rasul MG, Hassan NMS, Khan MMK, Rashedul HK. Gaseous and Particle Emissions from a Compression Ignition Engine Fueled with Biodiesel-Diesel Blends. Appl. Thermo-fluid Process. Energy Syst., Springer; 2018. p. 35–56.
307. Joy, N., Devarajan, Y., Nagappan, B., Anderson, A., Exhaust emission study on neat biodiesel and alcohol blends fueled diesel engine. Energy Sources, Part A Recover Util Environ Eff 40 (2018), 115–119.
308. Ballesteros, R., Hernández, J.J., Lyons, L.L., An experimental study of the influence of biofuel origin on particle-associated PAH emissions. Atmos Environ 44 (2010), 930–938.
309. Yang, P.M., Wang, C.C., Lin, Y.C., Jhang, S.R., Lin, L.J., Lin, Y.C., Development of novel alternative biodiesel fuels for reducing PM emissions and PM-related genotoxicity. Environ Res 156 (2017), 512–518.
310. Westphal, G.A., Krahl, J., Munack, A., Ruschel, Y., Schro der, O., Hallier, E., et al. Combustion of hydrotreated vegetable oil and jatropha methyl ester in a heavy duty engine: emissions and bacterial mutagenicity. Environ Sci Technol 46 (2012), 6417–6424.
311. Surawski, N.C., Miljevic, B., Ayoko, G.A., Roberts, B.A., Elbagir, S., Fairfull-Smith, K.E., et al. Physicochemical characterization of particulate emissions from a compression ignition engine employing two injection technologies and three fuels. Environ Sci Technol 45 (2011), 5498–5505.
312. Mehus, A.A., Reed, R.J., Lee, V.S.T., Littau, S.R., Hu, C., Lutz, E.A., et al. Comparison of acute health effects from exposures to diesel and biodiesel fuel emissions. J Occup Environ Med, 57, 2015, 705.
313. Bass, V.L., Schladweiler, M.C., Nyska, A., Thomas, R.F., Miller, D.B., Krantz, T., et al. Comparative cardiopulmonary toxicity of exhausts from soy-based biofuels and diesel in healthy and hypertensive rats. Inhal Toxicol 27 (2015), 545–556.
314. Mumaw, C.L., Surace, M., Levesque, S., Kodavanti, U.P., Kodavanti, P.R.S., Royland, J.E., et al. Atypical microglial response to biodiesel exhaust in healthy and hypertensive rats. Neurotoxicology 59 (2017), 155–163.
315. Shvedova, A.A., Yanamala, N., Murray, A.R., Kisin, E.R., Khaliullin, T., Hatfield, M.K., et al. Oxidative stress, inflammatory biomarkers, and toxicity in mouse lung and liver after inhalation exposure to 100% biodiesel or petroleum diesel emissions. J Toxicol Environ Heal Part A 76 (2013), 907–921.
316. Atkinson, R.W., Fuller, G.W., Anderson, H.R., Harrison, R.M., Armstrong, B., Urban ambient particle metrics and health: a time-series analysis. Epidemiology 21 (2010), 501–511.
317. Meister, K., Johansson, C., Forsberg, B., Estimated short-term effects of coarse particles on daily mortality in Stockholm, Sweden. Environ Health Perspect, 120, 2012, 431.
318. Correia, A.W., Pope, C.A. III, Dockery, D.W., Wang, Y., Ezzati, M., Dominici, F., The effect of air pollution control on life expectancy in the United States: an analysis of 545 US counties for the period 2000 to 2007. Epidemiology, 24, 2013, 23.
319. Fang, Y., Naik, V., Horowitz, L.W., Mauzerall, D.L., Air pollution and associated human mortality: the role of air pollutant emissions, climate change and methane concentration increases from the preindustrial period to present. Atmos Chem Phys 13 (2013), 1377–1394.
320. Cadelis, G., Tourres, R., Molinie, J., Short-term effects of the particulate pollutants contained in saharan dust on the visits of children to the emergency department due to asthmatic conditions in Guadeloupe (French Archipelago of the Caribbean). PLoS One, 9, 2014, e91136.
321. İlkılıç C., Aydın, H., Determination of performance and exhaust emissions properties of B75 in a CI engine application. Fuel Process Technol 92 (2011), 1790–1795.
322. Boström, C.-E., Gerde, P., Hanberg, A., Jernström, B., Johansson, C., Kyrklund, T., et al. Cancer risk assessment, indicators, and guidelines for polycyclic aromatic hydrocarbons in the ambient air. Environ Health Perspect, 110, 2002, 451.
323. Zhang, Z.H., Balasubramanian, R., Investigation of particulate emission characteristics of a diesel engine fueled with higher alcohols/biodiesel blends. Appl Energy 163 (2016), 71–80.
324. Khoshnevisan, B., Rafiee, S., Tabatabaei, M., Ghanavati, H., Mohtasebi, S.S., Rahimi, V., et al. Life cycle assessment of castor-based biorefinery: a well to wheel LCA. Int J Life Cycle Assess, 2017, 1–8.
325. Wuebbles, D.J., Jain, A.K., Concerns about climate change and the role of fossil fuel use. Fuel Process Technol 71 (2001), 99–119.
326. Watson, R.T., Albritton, D.L., Climate change 2001: Synthesis report: Third assessment report of the intergovernmental panel on climate change. 2001, Cambridge University Press.
327. De Oliveira, F.C., Coelho, S.T., History, evolution, and environmental impact of biodiesel in Brazil: A review. Renew Sustain Energy Rev 75 (2017), 168–179.
328. Farrell, S., Cavanagh, E., An introduction to life cycle assessment with hands-on experiments for biodiesel production and use. Educ Chem Eng 9 (2014), 67–76.
329. Xue, X., Collinge, W.O., Shrake, S.O., Bilec, M.M., Landis, A.E., Regional life cycle assessment of soybean derived biodiesel for transportation fleets. Energy Policy 48 (2012), 295–303.
330. Sheehan, J., Camobreco, V., Duffield, J., Graboski, M., Graboski, M., Shapouri, H., Life cycle inventory of biodiesel and petroleum diesel for use in an urban bus. 1998, National Renewable Energy Lab. (NREL), Golden, CO (United States).
331. Nanaki, E.A., Koroneos, C.J., Comparative LCA of the use of biodiesel, diesel and gasoline for transportation. J Clean Prod 20 (2012), 14–19.
332. Van Zutphen, J.M., Wijbrans, R.A., LCA GHG emissions in production and combustion of Malaysian palm oil biodiesel. J Oil Palm, Environ Heal, 2012, 2.
333. Cornelissen, R.L., Hirs, G.G., The value of the exergetic life cycle assessment besides the LCA. Energy Convers Manage 43 (2002), 1417–1424.
334. Atabani, A.E., Silitonga, A.S., Badruddin, I.A., Mahlia, T.M.I., Masjuki, H.H., Mekhilef, S., A comprehensive review on biodiesel as an alternative energy resource and its characteristics. Renew Sustain Energy Rev 16 (2012), 2070–2093.
335. Omer, A.M., Green energies and the environment. Renew Sustain Energy Rev 12 (2008), 1789–1821.
336. Pradhan, A., Shrestha, D.S., Van Gerpen, J., McAloon, A., Yee, W., Haas, M., et al. Reassessment of life cycle greenhouse gas emissions for soybean biodiesel. Trans ASABE 55 (2012), 2257–2264.
337. Pimentel, D., Patzek, T.W., Ethanol production using corn, switchgrass, and wood; biodiesel production using soybean and sunflower. Nat Resour Res 14 (2005), 65–76.
338. Ulmanen, J.H., Verbong, G.P.J., Raven, R.P.J.M., Biofuel developments in Sweden and the Netherlands: Protection and socio-technical change in a long-term perspective. Renew Sustain Energy Rev 13 (2009), 1406–1417.
339. Thompson, P.B., The agricultural ethics of biofuels: the food vs. fuel debate. Agriculture 2 (2012), 339–358.
340. Zhang, Y., Dube, M.A., McLean, D.D.L., Kates, M., Biodiesel production from waste cooking oil: 1. Process design and technological assessment. Bioresour Technol 89 (2003), 1–16.
341. Refaat, A.A., Different techniques for the production of biodiesel from waste vegetable oil. Int J Environ Sci Technol 7 (2010), 183–213.
342. Pradhan, A., Mbohwa, C., Development of biofuels in South Africa: Challenges and opportunities. Renew Sustain Energy Rev 39 (2014), 1089–1100.
343. Pradhan, A., Shrestha, D.S., Van Gerpen, J., Duffield, J., The energy balance of soybean oil biodiesel production: a review of past studies. Trans ASABE 51 (2008), 185–194.
344. Sharma, A., Strezov, V., Life cycle environmental and economic impact assessment of alternative transport fuels and power-train technologies. Energy 133 (2017), 1132–1141.
345. Liang, S., Xu, M., Zhang, T., Life cycle assessment of biodiesel production in China. Bioresour Technol 129 (2013), 72–77.
346. Shojaeefard, M.H., Etgahni, M.M., Meisami, F., Barari, A., Experimental investigation on performance and exhaust emissions of castor oil biodiesel from a diesel engine. Environ Technol 34 (2013), 2019–2026.
347. Tüccar, G., Özgür, T., Aydın, K., Effect of diesel-microalgae biodiesel-butanol blends on performance and emissions of diesel engine. Fuel 132 (2014), 47–52.
348. Tan, Y.H., Abdullah, M.O., Nolasco-Hipolito, C., Zauzi, N.S.A., Abdullah, G.W., Engine performance and emissions characteristics of a diesel engine fueled with diesel-biodiesel-bioethanol emulsions. Energy Convers Manage 132 (2017), 54–64.
349. Jiaqiang, E., Zuo, W., Gao, J., Peng, Q., Zhang, Z., Hieu, P.M., Effect analysis on pressure drop of the continuous regeneration-diesel particulate filter based on NO2 assisted regeneration. Appl Therm Eng 100 (2016), 356–366.
350. Zhang, B., Jiaqiang, E., Gong, J., Yuan, W., Zuo, W., Li, Y., et al. Multidisciplinary design optimization of the diesel particulate filter in the composite regeneration process. Appl Energy 181 (2016), 14–28.
351. Jiaqiang, E., Han, D., Deng, Y., Zuo, W., Qian, C., Wu, G., et al. Performance enhancement of a baffle-cut heat exchanger of exhaust gas recirculation. Appl Therm Eng 134 (2018), 86–94.
352. Deng, Y., Liu, H., Zhao, X., Jiaqiang, E., Chen, J., Effects of cold start control strategy on cold start performance of the diesel engine based on a comprehensive preheat diesel engine model. Appl Energy 210 (2018), 279–287.
353. Aghbashlo, M., Hosseinpour, S., Tabatabaei, M., Rastegari, H., Ghaziaskar, H.S., Multi-objective exergoeconomic and exergoenvironmental optimization of continuous synthesis of solketal through glycerol ketalization with acetone in the presence of ethanol as co-solvent. Renew Energy 130 (2019), 735–748.
354. Aghbashlo, M., Tabatabaei, M., Rastegari, H., Ghaziaskar, H.S., Shojaei, T.R., On the exergetic optimization of solketalacetin synthesis as a green fuel additive through ketalization of glycerol-derived monoacetin with acetone. Renew Energy 126 (2018), 242–253.
355. Aghbashlo, M., Tabatabaei, M., Rastegari, H., Ghaziaskar, H.S., Exergy-based sustainability analysis of acetins synthesis through continuous esterification of glycerol in acetic acid using Amberlyst® 36 as catalyst. J Clean Prod 183 (2018), 1265–1275.
356. Aghbashlo, M., Tabatabaei, M., Hosseinpour, S., Rastegari, H., Ghaziaskar, H.S., Multi-objective exergy-based optimization of continuous glycerol ketalization to synthesize solketal as a biodiesel additive in subcritical acetone. Energy Convers Manage 160 (2018), 251–261.
357. Aghbashlo, M., Tabatabaei, M., Jazini, H., Ghaziaskar, H.S., Exergoeconomic and exergoenvironmental co-optimization of continuous fuel additives (acetins) synthesis from glycerol esterification with acetic acid using Amberlyst 36 catalyst. Energy Convers Manage 165 (2018), 183–194.