Sensing defects during directed-energy additive manufacturing of metal parts using optical emissions spectroscopy

25th Annual International Solid Freeform Fabrication Symposium � An Additive Manufacturing Conference, SFF 2014

Volumn , Issue , 2014, Pages 278-287

  Nassar, A R ^a   Spurgeon, T J ^a   Reutzel, E W ^a  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

3D PRINTERS; ADDITIVES; ALUMINUM ALLOYS; COMPUTERIZED TOMOGRAPHY; DATA ACQUISITION; DEPOSITION; LIGHT EMISSION; NONDESTRUCTIVE EXAMINATION; OPTICAL EMISSION SPECTROSCOPY; REPAIR; TERNARY ALLOYS; TITANIUM ALLOYS; TITANIUM COMPOUNDS; VANADIUM ALLOYS;

CONTROL INFRASTRUCTURES; CRITICAL COMPONENT; DEFECT FORMATION; DEPOSITION PROCESS; DETECTING DEFECTS; EMISSION SPECTRUMS; NON DESTRUCTIVE TESTING; OPTICAL EMISSIONS;

DEFECTS;

EID: 85037607595     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (25)

1. W. M. Steen and J. Mazumder, “Laser Automation and In-process Sensing,” in Laser Material Processing, Springer London, 2010, pp. 485-518.
2. M. R. Boddu, R. G. Landers, and F. W. Liou, “Control of laser cladding for rapid prototyping-A review,” in Solid freeform fabrication symposium Proceedings, 2001, pp. 6-8.
3. E. W. Reutzel and A. R. Nassar, “A review of sensing and control for metal-based additive manufacturing,” in Solid Freeform Fabrication Proceedings, Austin, TX. (submitted), 2014.
4. A. Sun, E. Kannatey-Asibu Jr, and M. Gartner, “Sensor systems for real-time monitoring of laser weld quality,” J. Laser Appl., vol. 11, no. 4, pp. 153-168, 1999.
5. J. R. Araujo, J. J. Rodriguez-Andina, J. Farina, F. Vidal, J. L. Mato, and M. A. Montealegre, “FPGA-based laser cladding system with increased robustness to optical defects,” in IECON 2012-38th Annual Conference on IEEE Industrial Electronics Society, 2012, pp. 4688-4693.
6. J.-P. Kruth, P. Mercelis, J. Van Vaerenbergh, and T. Craeghs, “Feedback control of selective laser melting,” in Proceedings of the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, 2007, pp. 521-527.
7. G. Bi, B. Schürmann, A. Gasser, K. Wissenbach, and R. Poprawe, “Development and qualification of a novel laser-cladding head with integrated sensors,” Int. J. Mach. Tools Manuf., vol. 47, no. 3-4, pp. 555-561, Mar. 2007.
8. J. T. Hofman, B. Pathiraj, J. van Dijk, D. F. de Lange, and J. Meijer, “A camera based feedback control strategy for the laser cladding process,” J. Mater. Process. Technol., vol. 212, no. 11, pp. 2455-2462, Nov. 2012.
9. D. Hu, H. Mei, and R. Kovacevic, “Closed loop control of 3d laser cladding based on infrared sensing,” in Solid Freeform Fabrication Proceedings, 2001, pp. 129-137.
10. G. Bi, A. Gasser, K. Wissenbach, A. Drenker, and R. Poprawe, “Identification and qualification of temperature signal for monitoring and control in laser cladding,” Opt. Lasers Eng., vol. 44, no. 12, pp. 1348-1359, Dec. 2006.
11. L. Song and J. Mazumder, “Feedback control of melt pool temperature during laser cladding process,” Control Syst. Technol. IEEE Trans. On, vol. 19, no. 6, pp. 1349-1356, 2011.
12. D. P. Hand, M. D. T. Fox, F. M. Haran, C. Peters, S. A. Morgan, M. A. McLean, W. M. Steen, and J. D. C. Jones, “Optical focus control system for laser welding and direct casting,” Opt. Lasers Eng., vol. 34, no. 4, pp. 415-427, 2000.
13. A. Fathi, A. Khajepour, E. Toyserkani, and M. Durali, “Clad height control in laser solid freeform fabrication using a feedforward PID controller,” Int. J. Adv. Manuf. Technol., vol. 35, no. 3-4, pp. 280-292, Oct. 2006.
14. M. Zeinali and A. Khajepour, “Height Control in Laser Cladding Using Adaptive Sliding Mode Technique: Theory and Experiment,” J. Manuf. Sci. Eng., vol. 132, no. 4, p. 041016, 2010.
15. A. Heralić, A.-K. Christiansson, and B. Lennartson, “Height control of laser metal-wire deposition based on iterative learning control and 3D scanning,” Opt. Lasers Eng., vol. 50, no. 9, pp. 1230-1241, Sep. 2012.
16. L. Song, V. Bagavath-Singh, B. Dutta, and J. Mazumder, “Control of melt pool temperature and deposition height during direct metal deposition process,” Int. J. Adv. Manuf. Technol., vol. 58, no. 1-4, pp. 247-256, May 2011.
17. K. Bartkowiak, “Direct laser deposition process within spectrographic analysis in situ,” Phys. Procedia, vol. 5, pp. 623-629, Jan. 2010.
18. L. Song and J. Mazumder, “Real Time Cr Measurement Using Optical Emission Spectroscopy During Direct Metal Deposition Process,” IEEE Sens. J., vol. 12, no. 5, pp. 958-964, May 2012.
19. L. Song, C. Wang, and J. Mazumder, “Identification of phase transformation using optical emission spectroscopy for direct metal deposition process,” 2012, p. 82390G-82390G-9.
20. A. Ancona, V. Spagnolo, P. M. Lugara, and M. Ferrara, “Optical Sensor for real-time Monitoring of CO< sub> 2 Laser Welding Process,” Appl. Opt., vol. 40, no. 33, pp. 6019-6025, 2001.
21. T. Sibillano, A. Ancona, V. Berardi, E. Schingaro, G. Basile, and P. Mario Lugarà, “A study of the shielding gas influence on the laser beam welding of AA5083 aluminium alloys by in-process spectroscopic investigation,” Opt. Lasers Eng., vol. 44, no. 10, pp. 1039-1051, Oct. 2006.
22. M. M. Collur and T. DebRoy, “Emission spectroscopy of plasma during laser welding of AISI 201 stainless steel,” Metall. Mater. Trans. B, vol. 20, no. 2, pp. 277-286, 1989.
23. Z. Szymanski, J. Kurzyna, and W. Kalita, “The spectroscopy of the plasma plume induced during laser welding of stainless steel and titanium,” J. Phys. Appl. Phys., vol. 30, no. 22, p. 3153, 1997.
24. P. Sforza and D. de Blasiis, “On-line optical monitoring system for arc welding,” NDT E Int., vol. 35, no. 1, pp. 37-43, Jan. 2002.
25. A. R. Nassar, R. Akarapu, S. M. Copley, and J. A. Todd, “Investigations of laser-sustained plasma and its role in laser nitriding of titanium,” J. Phys. Appl. Phys., vol. 45, no. 18, p. 185401, May 2012.