Optical substrate materials for synchrotron radiation beam lines

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 10289, Issue , 1997, Pages 339-372

  Howells, Malcolm R ^a   Paquin, Roger A ^b  

^a LAWRENCE BERKELEY NATIONAL LABORATORY   (United States)

^b UNIVERSITY OF ARIZONA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AGE HARDENING; CARBON STEEL; CERAMIC MATERIALS; COATED MATERIALS; COST ENGINEERING; FUSED SILICA; NICKEL; POLISHING; PRECIPITATION (CHEMICAL); SILICA; SILICON; SILICON CARBIDE; SUBSTRATES; SYNCHROTRON RADIATION; SYNCHROTRONS;

17-4 PH STAINLESS STEEL; CVD SILICON CARBIDE; ELECTROLESS NICKEL; MANUFACTURING STRATEGY; OPTICAL SUBSTRATES; PRECIPITATION-HARDENING STAINLESS STEEL; SPECIFIC MATERIALS; SYNCHROTRON-RADIATION BEAM LINE;

STAINLESS STEEL;

EID: 85037138003     PISSN: 0277786X     EISSN: 1996756X     Source Type: Conference Proceeding    
DOI: 10.1117/12.279813     Document Type: Conference Paper

References (87)

1. Acteron Corp., 851 Shasta St. Redwood City, CA 94063.
2. Advanced Composite Materials Corp., 1525, South Buncombe Rd, Greer, SC 29651-9208, USA.
3. Anthony, F., "High heat load optics: an historical overview", Opt. Eng., 34, 313-320 (1995).
4. Arthur, J. W., H. Thompkins, C. Troxel, R. J. Contolini, E. Schmitt, D. H. Bilderback, C. Henderson, J. White, T. Settersten, "MicroChannel Water Cooling of Silicon X-ray Monochromator Systems", Rev. Sci. Inst., 63, 433-7 (1992).
5. Avery, R. T., "Thermal Problems on High Flux Beamlines", Nucl. lnstrum. Meth., 222, 146-158 (1984).
6. Becker, K. B., "Synchrotron Radiation Mirrors for High Intensity Beamlines", Rev. Sci. Inst., 63, 1420-3 (1992).
7. Bender, J. W., R. L. Wahl, "Work-induced stress and long-term stability in optically polished silicon", in Optomechanics and Dimensional Stability, Paquin, R. A., (Ed), Proc. SPIE, Vol. 1533, SPIE, Bellingham, 1991.
8. Bingham, R. G., D. D. Walker, ed., Metal Mirrors, Proc. SPIE, Vol. 1931, SPIE, Bellingham, 1992.
9. Boeing North American, 2511C, Broadbent Parkway NE, Albuquerque, NM 87107, USA.
10. British Nuclear Fuels, Risley, Warrington, WA3 6AS, UK.
11. Carborundum Co., Box 156, Niagra Falls, NY 14302, USA.
12. Carslaw, H. S., J. C. Jaeger, Conduction of Heat in Solids, Oxford University Press, Oxford, 1978.
13. Choyke, J. R., F. Farich, R. A. Hoffman, "SiC a New Material for Mirrors", Appl. Opt., 15, 2006-7 (1976).
14. Corning Applied Optics, ELN7421, Orangewood Ave, Garden Grove, CA 92841, USA.
15. Corning Glassworks, Advanced Products Division, Corning, NY 14831, USA.
16. Dallas-Optical-Systems, 1996, 1790, Connie Lane, Rockwell TX 75087, USA.
17. DiGennaro, R., T. Swain, "Engineering for High Heat Loads on ALS Beamlines", Nucl. Inst. Metk, A291, 313-6 (1990A).
18. DiGennaro, R. T. S., "A Directly Cooled Grating Substrate for ALS Undulator Beamlines", Nucl. Instrum. Meth., A291, 305-312 (1990B).
19. Foucault, L., C. R. Acad. Sci. Paris, 441, 339 (1857).
20. Freund, A. Private communication (1996)
21. Freund, A. K., "Summary of the Satellite Workshop on Thermal Properties of Synchrotron Radiation Optics", Rev. Sci. Inst., 63, 1623-4 (1992B).
22. Gentilman, R. L., E. A. McGuire, "Chemical Vapor Deposition of Silicon Carbide for Large Area Mirrors", in Reflecting Optics for Synchrotron Radiation, Howells, M. R., (Ed), Vol. 315, SPIE, Bellingham, Bellingham, 1981.
23. Goela, J. S., M. A. Pickering, "Optics Applications of chemical-vapor-deposited SiC", in These proceedings, 1997.
24. Goela, J. S., M. A. Pickering, R. L. Taylor, B. W. Murray, A. Lompado, "Properties of Chemical-Vapor-Deposited Silicon Carbide for Optics in Severe Environments", Appl. Opt., 30, 3166-3175 (1991).
25. Guillaume, C. E., Les Application des Aciers au Nickel, Gauthiers-Villars, Paris, 1904.
26. Guillaume, C. E., "The Anomaly of the Nickel-Steels", Proc. Phys. Soc, 32, 374-404 (1920).
27. Hibbard, D. L., "Electroless nickel for optical applications", in These proceedings
28. Holman, J. P., Heat Transfer, 6th edition, McGraw-Hill, New York, 1986.
29. Howells, M. R., "Some Fundamentals of Cooled Mirrors for Synchrotron Radiation Beam Lines", Opt. Eng., 35, 1187-1197 (1996).
30. Howells, M. R., D. Lunt, "Design considerations for an ajustable-curvature, high-power, x-ray mirror based on elastic bending", Opt. Eng., 32, 1981-1989 (1993).
31. Hughes Danbury Optical Systems, 100, Wooster Heights Road, Danbury CT 06810-7589, USA.
32. Hyperfine Inc., 4946, North 63rd Street, Boulder CO 80301-3215, USA.
33. Jacobs, S. F., "Dimensional stability of materials useful in optical engineering", Optica Acta, 33, 1377-1388 (1986).
34. Jacobs, S. F., "Variable Invariables-Dimensional Instability with Time and Temperature", in Optomechanical design, Yoder, P. R., Jr., (Ed), Critical Reviews of Optical Science and Technology, Vol. CR 43, SPIE, Bellingham, 1992.
35. Jakob, M., Heat Transfer, John Wiley, New York, 1949.
36. Khounsary, A. M, ed., High Heat Flux Engineering, Proc. SPIE, Vol. 1739, SPIE, Bellingham, 1992.
37. Khounsary, A. M., ed., High Heat Flux Engineering II, Proc.SPIE, Vol. 1997, SPIE, Bellingham, 1993.
38. Khounsary, A. M, ed., Special Section on High Heat Flux Optical Engineering, Optical Engineering, Vol. 34, , 1995.
39. Killpatrick, D. H., "Review of the Properties of Electroless Nickel", in Proceedings of the Conference on Aluminum, Beryllium and Silicon Carbide Optics, Oak Ridge, 1993, , Oak Ridge National Laboratory.
40. Lanxide Company, PO Box 6077, Newark Delaware, 19714, USA.
41. Lemaitre, G, "Optical Figuring by Elastic Relaxation Methods", in Current Trends in Optics, Arrecchi, F. T., F. R. Aussenegg, (Ed), Taylor and Francis, London, 1981.
42. Lement, B. S., Distortion in Tool Steels, American Society for Metals, Metals Park, OH, 1955.
43. Lement, B. S., B. L. Averback, M. Cohen, "The dimensional behavior of Invar", Trans. Am. Soc. Met., 43, 1072-1097 (1951).
44. Lunt, D. L., J. W. Bender, D. G. Ewing, W. R.McKinney, "XUV synchrotron optical components for the Advanced Light Source-fabrication and metrology", in Optics for high-brightness synchrotron radiation beamlines, Arthur, J., (Ed), Proc. SPIE, Vol. 1740, SPIE, Bellingham, 1992.
45. Magida, M. B., R. A. Paquin, J. J. Richmond, "Dimensional stability of bare and coated reaction-bonded silicon carbide", in Dimensional Stability, Paquin, R. A., (Ed), Proc. SPIE, Vol. 1335, SPIE, Bellingham, 1990.
46. Maringer, R. E., "Review of dimensional instability in metals", Defense Metals Information Center Memorandum, DMIC 213, Battelle Memorial Institute, 1966.
47. Marschall, C. W., R. E. Maringer, Dimensional Instability: an Introduction, Pergamon, Oxford, 1977.
48. McCain, W. S., R. E. Maringer, "Mechanical and physical properties of invar and invar-type alloys", Defense Metals Information Center, DMIC 207, Battelle Memorial Institute, 1965.
49. McKinney, W., S. C. Irick, D. L. J. Lunt, "Water-cooled Metal Optics for the Advanced Light Source", Nucl. Instrum. Meth., A319, 179-184 (1992).
50. McKinney, W. R., C. L. Shannon, E. Schults, "Water-cooled ion-milled diffraction gratings for the synchrotron community", Nucl. Instrum. Meth., 347, 220-225 (1993).
51. Meyerson, M. R., P. M. Giles, P. F. Newfield, "Dimensional stability of gage block materials", Journal of Materials, JMSA, 3, 727-743 (1968).
52. Meyerson, M. R., W. A. Pennington, "Gage block of superior stability II: fully hardened steels", Trans. ASM., 57, 3-25 (1964).
53. Meyerson, M. R., M. C. Sola, "Gage blocks of superior stability III: the attainment of ultrastability", Transactions of the ASM, 57, 164-185 (1964).
54. Meyerson, M. R., T. R. Young, W. R. Ney, "Gage blocks of superior stability: initial developments and measurement", Journal of Research of the National Bureau ofStandards-C. Engineering and Instrumentation, 64C, 175-207 (1960).
55. Michalske, T. A., B. C. Bunker, "A chemical kinetics model for glass fracture", J. Am. Ceramic Soc, 76, 7613-7618 (1993).
56. Mohn, W. R., D. Vukobratovich, "Recent applications of metal matrix composites in precision instruments and optical systems", Opt. Eng., 27, 90-98 (1988).
57. Morton International Inc., Advanced Materials Division, 185, New Boston St, Wobum, MA 01801, USA.
58. Padmore, H., M. R. Howells, S. Irick, T. Renner, R. Sandler, Y.-M. Koo, "Some new schemes for producing high-accuracy elliptical mirrors by elastic bending", in Optics for High-Brightness Synchrotron Radiation beamlines II, Berman, L., J. Arthur, (Ed), Proc. SPIE, Vol. 2856, SPIE, Bellingham, 1996.
59. Palmer, J. R., "Continuous wave laser damage on optical components", Opt. Eng., 22, 435-446 (1983).
60. Paquin, R., "Dimensional Instability of materials: how critical is it in the design of optical instruments", in Optomechanical design, Yoder, P. R., (Ed), Proc. SPIE, Vol. CR43, SPIE, Bellingham, 1992.
61. Paquin, R. A., ed., Dimensional Stability, Proc. SPIE, Vol. 1335, SPIE, Bellingham, 1990.
62. Paquin, R. A., D. Vukobratovich, ed., Optomechanics and Dimensional Stability, Proc SPIE, Vol. 1533, SPIE, Bellingham, 1991.
63. Parker, K., "Internal stress measurements of electroless nickel coatings by the rigid strip method", in Testing of Metallic and Inorganic Coatings, Harding, W. B., G. A. D. Bari, (Ed), Vol. ASTM STP 947, American Society for Testing and Materials, Philadelphia, 1987.
64. Parker, K., H. Shah, "Residual stresses in elctroless nickel plating", Plating, 58, 230-236 (1971).
65. Perkin Elmer Corporation, 50, Danbury Rd, Wilton CT 06877.
66. Petersen, K. E., "Silicon as a mechanical material", Proc. IEEE, 70, 420-457 (1982).
67. Pickering, M. A., R. L. Taylor, J. T. Keeley, G. A. Graves, "Chemically Vapor Deposited Silicon Carbide (SiC) for Optical Applications", in Space Optical Materials and Space Qualification of Optics, Hale, R. R., (Ed), Proc. SPIE, Vol. 1118, SPIE, Bellingham, 1989.
68. Rehn, V., V. O. Jones, "Vacuum Ultraviolet (VUV) and Soft X-ray Mirrors for Synchrotron Radiation", Opt. Eng., 17, 504-511 (1978).
69. Saito, H., ed., Physics and applications of invar alloys, Maruzen company, Tokyo, 1978.
70. Samal, P. K., "Brazing and diffusion bonding of Glidcop™", in The Metal Science of Joining, Cieslak, M. J., J. H. Perepezko, S. Kang, M. E. Glicksman, (Ed), The Minerals Metals and Materials Society, Materials Park, Ohio, 1992.
71. Sato, S., A. Iijima, S. Takeda, M. Yanagihara, T. Miyahara, A. Yagashita, T. Koide, H. Maezawa, "SiC Mirror Development at the Photon Factory", Rev. Sci. Inst., 60, 1479-1485 (1989).
72. Schott Glass Technologies, 400, York Ave, Durea PA 18642, USA.
73. SCM Metal Products Inc., University Circle Research Center, 11000 Cedar Ave, Cleveland, OH 44106, USA.
74. Smither, R., "Summary of a Workshop on High Heat Load X-ray Optics Held at Argonne National Laboratory", Nucl Instrum. Meth., A291, 286-299 (1990).
75. Sokolowski, W., S. Jacobs, M. Lane, T. O'Donnell, C. Hsieh, "Dimensional stability of high purity invar 36", in Quality and reliabilty for optical systems, Bilbro, J. W., R. E. Parks, (Ed), Proc. SPIE, Vol. 1993, Bellingham, 1993.
76. Steele, J. M., D. A. Thompson, S. F. Jacobs, D. L. Bass, "Temperature and age effects on the temporal stability of invar", in Current Developments in Optical Design and Optical Engineering II, Fischer, R. E., W. J. Smith, (Ed), Proc. SPIE, Vol. 1752, Bellingham, 1992.
77. Stevens, J. J., R. J. Bourcier, F. J. Vigil, D. T. Schmale, "Mechanical properties of dispersion-strengthened copper: a comparison braze-cycle-annealed and course-grain microstructures", SAND88-1351, Sandia National Laboratory, 1988.
78. Syn, C. K., J. W. Dini, J. S. Taylor, G. L. Mara, R. R. Vandervoort, R. R. Donaldson, "Influence of phosphorus content on the machinability of electrolss nickel deposits", in Proceedings of the Conference on The Electroless Nickel Conference, IV, 1985, Vol. LLNL preprint UCRL-91148, Products Finishing magazine.
79. Takacs, P. Z., S. K. Feng, E. L. Church, S. Qian, W. Liu, "Long Trace Profile Measurements on Cylindrical Aspheres", in Advances in Fabrication and Metrology for Optics and Large Optics, Arnold, J. B., R. E. Parks, (Ed), Proc. SPIE, Vol. 966, SPIE, Bellingham, 1988.
80. Tobin, E., M. Magida, S. Kishner, M. Krim, "Design Fabrication and test of a meter-class reaction-bonded SiC mirror blank", in Silicon Carbide Materials for Optics and Precision Structures, Ealey, M. A., (Ed), Proc. SPIE, Vol. 2543, SPIE, Bellingham, 1995.
81. Tonnessen, T., S. Fisher, F. Anthony, D. Lunt, A. Khounsary, K. Randall, E. Gluskin, W. Yun, "High heat flux mirror design for an undulator beamline", in High Heat Flux Engineering, Khounsary, A. M., (Ed), Proc. SPIE, Vol. 1739, SPIE, Bellingham, 1992.
82. Tonnessen, T. W., J. Arthur, "Cooled silicon crystal monochromator test results", in High Heat Flux Engineering, Khounsary, A., (Ed), Proc. SPIE, Vol. 1739, SPIE, Bellingham, 1992.
83. Touloukian, Y. S., R. K. Kirby, R. E. Taylor, P. D. Desai, Thermal Expansion Metallic Elements and Alloys, IFI/Plenum, New York, 1976.
84. Tuckerman, D. B., "Heat-Transfer Microstructures for Integrated Circuits", PhD Thesis, Stanford University, 1984.
85. Wyco, 2990, E. Fort Lowell, Tucson, AZ 85716, USA.
86. Yoder, P. R., ed., Optomechanical Design, Critical Reviews of Optical Science and Technology, Vol. CR43, SPIE, Bellingham, 1992.
87. Zwilski, K. M., ed., Metals Handbook, Tenth Edition, ASM International, Materials Park, Ohio, 1990.