Understanding power quality problems: Voltage sags and interruptions

Understanding Power Quality Problems: Voltage Sags and Interruptions

Volumn , Issue , 1999, Pages 1-543

  Bollen, Math H J ^a  

^a CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

FORECASTING; PROBLEM SOLVING; QUALITY CONTROL; RELIABILITY ANALYSIS; STOCHASTIC SYSTEMS;

IN-DEPTH ANALYSIS; MITIGATION METHODS; POWER DISTURBANCES; POWER ENGINEERS; POWER QUALITY PROBLEM; POWER QUALITY STANDARDS; POWER SYSTEM RELIABILITY EVALUATION; PRACTICAL SOLUTIONS;

POWER QUALITY;

EID: 85036566378     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1109/9780470546840     Document Type: Book

References (215)

1. T. S. Key, Diagnosing power-quality related computer problems, IEEE Transactions on Industry Applications, vol. 15, no. 4, July 1979, pp. 381-393.
2. M. F. McGranaghan, D. R. Mueller, and M. J. Samotej, Voltage sags in industrial power systems, IEEE Transactions on Industry Applications, vol. 29, no. 2, March 1993, pp. 397-403.
3. IEEE recommended practice for monitoring electric power quality, IEEE Std. 1159-1995, New York: IEEE, 1995.
4. Electromagnetic compatibility (EMC), Part 2: Environment, Section 2: Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems, IEC Std. 61000-2-2.
5. Measurement guide for voltage characteristics, UNIPEDE report 23002 Ren 9531. UNIPEDE documents can be obtained from UNIPEDE 28, rue Jacques Ibert, 75858 Paris Cedex 17, France.
6. R. Wilkins and M. H. J. Bollen, The role of current limiting fuses in power quality improvement, 3rd Int. Conf. on Power Quality: End-use applications and perspectives, October 1994, Amsterdam.
7. Lj. Kojovic and S. Hassler, Application of current limiting fuses in distribution systems for improved power quality and protection, IEEE Transactions on Power Delivery, vol. 12, no. 2, April 1997, pp. 791-800.
8. L. E. Conrad (chair), Proposed Chapter 9 for predicting voltage sags (dips) in revision to IEEE Std 493, the Gold Book, IEEE Transactions on Industry Applications, vol. 30, no. 3, May 1994, pp. 805-821.
9. J. A. Demcko and S. Sullivan, Power quality problems and solutions at Arizona public service company, 7th IEEE Int. Conf. on Harmonics and Quality of Power (ICHPQ), Las Vegas, NV, October 1996, pp. 348-353.
10. Protective Relays Application Guide. GEC Alsthom Measurements Ltd, Stafford, U.K., 1987.
11. R. C. Dugan, L. A. Ray, D. D. Sabin, G. Baker, C. Gilker, and A. Sundaram, Impact of fast tripping of utility breakers on industrial load interruptions, IEEE Industry Applications Society Annual Meeting, Denver, CO, October 1994, pp. 2326-2333. A revised version of this paper appeared as “Fast tripping of utility breakers and industrial load interruptions,” in IEEE Industry Applications Magazine, vol. 2, no. 3, May-June 1996, pp. 55-64.
12. E. W. Gunther and H. Mehta, A survey of distribution system power quality—Preliminary results, IEEE Transactions on Power Delivery, vol. 10, no. 1, January 1995, pp. 322-329.
13. L. Evans, A. Levy, D. Start, B. H. Turner, and M. J. Williams, System utilization consultancy group: Project team suit—voltage sags, CEGB Draft Interim report, December 1987, not published.
14. H. Seljeseth, A. Pleym, K. Sand, and H. Seljeseth, The Norwegian power quality programme, 3rd Int. Conf. on Power Quality: End-use applications and perspectives, October 1994, Amsterdam. KEMA, Arnhem, The Netherlands, 1994.
15. H. J. Bollen, T. Tayjasajant, and G. Yalcinkaya, Assessment of the number of voltage sags experienced by a large industrial customer, IEEE Transactions on Industry Applications, vol. 33, no. 6, November 1997, pp. 1465-1471.
16. The Excel file containing these measurements was obtained from a web-site with test data set up by R. L. Morgan for IEEE project group PI 159.2, with the aim of testing methods of sag characterization. http://grouper.ieee.Org/groups/1159/2/index.html.
17. M. H. J. Bollen, The influence of motor reacceleration on voltage sags, IEEE Transactions on Industry Applications, vol. 31, no. 4, July 1995, pp. 667-674.
18. G. Yalçinkaya and M. H. J. Bollen, Stochastic assessment of frequency, magnitude and duration of non-rectangular sags in a large industrial distribution system, Power Systems Computation Conference, August 1996, Dresden, Germany, pp. 1028-1034.
19. This figure was obtained from the Power Quality monitoring demonstration at the Electrotek Concepts Website, http://www.electrotek.com.
20. L. E. Conrad and M. H. J. Bollen, Voltage sag coordination for reliable plant operation, IEEE Transactions on Industry Applications, vol. 33, no. 6, November 1997, pp. 1459-1464. IEEE recommended practice for the design of reliable industrial and commercial power systems (The Gold Book), IEEE Std. 493-1997.
21. IEEE recommended practice for evaluating electric power system compatibility with electronic process equipment, IEEE Std. 1346-1998.
22. M. N. Eggleton, E. van Geert, W. L. Kling, M. Mazzoni, and M. A. M. M. van der Meijden, Network structure in sub-transmission systems—features and practices in different countries, 12th Int. Conf. on Electricity Distribution (ClRED), June 1993, paper 6.9, pp. 1-8.
23. P. M. Anderson, Analysis of Faulted Power Systems, New York: IEEE Press, 1995. Voltage dips, short interruptions and voltage variations immunity tests, I EC Std. 61000-411.
24. IEEE recommended practice for emergency and standby power systems for industrial and commercial applications (IEEE Orange Book), New York, IEEE Std. 446-1995.
25. Mansoor, E. R. Collins, M. H., J. Bollen, and S. Lahaie, Behaviour of adjustable-speed drives during phase-angle jumps and unbalanced sags, PQA-97 Europe, June 1997, Stockholm, Sweden.
26. Brief 11: Low-voltage ride-through performance of a personal computer power supply, EPRI Power Quality Database, Elforsk, Stockholm, Sweden, 1995.
27. Brief 7: Undervoltage ride-through performance of off-the-shelf personal computers, EPRI Power Quality Database, Elforsk, Stockholm, Sweden, 1995.
28. Mansoor, E. R. Collins, and R. L. Morgan, Effects of unsymmetrical voltage sags on adjustable-speed drives, 7 th IEEE Int. Conf. on Harmonics and Quality of Power (1CHPQ), Las Vegas, NV, October 1996, pp. 467-472.
29. M. Couvreur, Improving the immunity of industrial power electronics against voltage dips, 11th Int. Conf. on Electricity Distribution (CIRED), 22-26 April 1991, Liege, Belgium.
30. Mansoor, M. and R. J. Ferraro, Characterizing ASD power quality application issues, PQA-97 North America, March 3-6, 1997, Columbus, OH.
31. J. Holtz, W. Lotzhat, and S. Stadfeld, Controlled AC drives with ride-through capacity at power interruption, IEEE Transactions on Industry Applications, vol. 30, no. 5, September 1994, pp. 1275-1283.
32. Brief 10: Low-voltage ride-through performance of AC contactor motor starters, EPRI Power Quality Database, Elforsk, Stockholm, Sweden, 1995.
33. C. Pumar, J. Amantegui, J. R. Torrealday, and C. Ugarte, A comparison between DC and AC drives as regards their behaviour in the presence of voltage dips: New techniques for reducing the susceptibility of AC drives, Int. Conf. on Electricity Distribution (CIRED), June 2-5, 1997, Birmingham, U.K., pp. 9/1-5.
34. D. S. Dorr, A. Mansoor, A. G. Morinec, and J. C. Worley, Effects of power line voltage variations on different types of 400-W high-pressure sodium ballasts, IEEE Transactions on Industry Applications, vol. 33, no. 2, March 1997, pp. 472-476.
35. J. Lamoree, D. Mueller, P. Vinett, W. Jones, and M. Samotyj, Voltage sag analysis case studies, IEEE Transactions on Industry Applications, vol. 30, no. 4, July 1994, pp. 1083-1089.
36. A. E. Turner and E. R. Collins, The performance of AC contactors during voltage sags, 7 th Int. Conf. on Harmonics and Quality of Power (ICHPQ), Las Vegas, NV, October 1996, pp. 589-595.
37. PQTN Brief 39: Ride-through performance of programmable logic controllers, EPRI Power Electronics Applications Center, Knoxville, TN, November 1996.
38. H.G. Sarmiento and E. Estrada, A voltage sag study in an industry with adjustable-speed drives, IEEE Industry Applications Magazine, vol. 2, no. 1, January 1996, pp. 16-19.
39. J.C. Smith, J. Lamoree, P. Vinett, T. Duffy, and M. Klein, The impact of voltage sags on industrial plant loads, Int. Conf. Power Quality: End-use applications and perspectives (PQA-91), pp. 171-178.
40. R. A. Epperly, F. L. Hoadley, and R. W. Piefer, Considerations when applying ASD’s in continuous processes, IEEE Transactions on Industry Applications, vol. 33, no. 2, March 1997, pp. 389-396.
41. W. Sheperd, L. N. Hulley, and D. T. W. Liang, Power Electronics and Motor Control, 2nd ed., Chapter 12, Cambridge University Press, Cambridge, U.K., 1995.
42. L. Moran, P. D. Ziogas, and G. Joos, Design aspects of synchronous PWM rectifier-inverter systems under unbalanced input voltage conditions, IEEE Transactions on Industry Applications, vol. 28, no. 6, November 1992, pp. 1286-1293.
43. E. P. Wiechmann, J. R. Espinoza, and J. L. Rodriguez, Compensated carrier PWM synchronization: A novel method to achieve self-regulation and AC unbalance compensation in AC fed converters, IEEE Transactions on Power Electronics, vol. 7, no. 2, April 1992, pp. 342-348.
44. P. Rioual, H. Pouliquen, and J.-P. Louis, Regulation of a PWM rectifier in the unbalanced network state using a generalized model, IEEE Transactions on Power Electronics, vol. 11, no. 3, May 1996, pp. 495-502.
45. E. G. Strangas, V. E. Wagner, and T. D. Unruh, Variable speed drives evaluation test, IEEE Industry Applications Society Annual Meeting, October 1996, San Diego, CA, pp. 2239-2243.
46. A revised version of this paper appeared in IEEE Industry Applications Magazine, vol. 4, no. 1, January 1998, pp. 53-57.
47. L. Conrad, K. Little, and C. Grigg, Predicting and preventing problems associated with remote fault-clearing voltage dips, IEEE Transactions on Industry Applications, vol. 27, no. 1, January 1991, pp. 167-172.
48. Y. Sekine, T. Yamamoto, S. Mori, N. Saito, and H. Kurokawa, Present state of momentary voltage dip interferences and the countermeasures in Japan, Int. Conf. on Large Electric Networks (CIGRE), 34th Session, September 1992, Paris, France.
49. D. Dorr, T. Key, and G. Sitzlar, User expectations and manufacturer tendencies for system-compatible design of end-use appliances, 3rd Int. Conf. on Power Quality: Enduse applications and perspectives, October 1994, Amsterdam, The Netherlands.
50. A. David, J. Maire, and M. Dessoude, Influence of voltage dips and sag characteristics on electrical machines and drives: evaluation and perspective, 3rd Int. Conf. on Power Quality: End-use applications and perspectives, October 1994, Amsterdam, The Netherlands.
51. I EC Standard 1800-3, Adjustable speed electric drive systems, Part 3: EMC product standard including specific test methods.
52. N. Mohan, T. M. Undeland, and W. P Robbins, Power Electronics—Converters, Applications and Design, John Wiley and Sons, New York, 1995.
53. D. S. Dorr, M. B. Hughes, T. M. Gruzs, R. E. Jurewicz, and J. L. McClaine, Interpreting recent power quality surveys to define the electrical environment, IEEE Transactions on Industry Applications, vol. 33, no. 6, November 1997, pp. 1480-1487.
54. KJ. Torborg, Power Electronics—in Theory and Practice, Lund, Sweden: Studentliteratur, 1993. Published in the United States by Chartwell Bratt, Ltd.
55. E. R. Collins and R. L. Morgan, A three-phase sag generator for testing industrial equipment, IEEE Transactions on Power Delivery, vol. 11, no. 1, January 1996, pp. 526-532.
56. P. Wang, The use of FACTS devices to mitigate voltage sags, PhD thesis, Department of Electrical Engineering and Electronics, University of Manchester Institute of Science and Technology, Manchester, U.K., July 1997.
57. D. O. Koval and J. J. Leonard, Rural power profiles, IEEE Transactions on Industry Applications, vol. 30, no. 2, March-April 1994, pp. 469-475.
58. D.O. Koval, How long should power system disturbance site monitoring be significant? IEEE Transactions on Industry Applications, vol. 26, no. 4, July-August 1990, pp. 705-710.
59. J. Marquet, CREUTENSI: Software for determination of depth, duration and number of voltage dips (sags) on medium.voltage networks, EDF (Electricitè de France), Clamart, France, September 1992.
60. M. H. J. Bollen, Method for reliability analysis of industrial distribution systems, I EE Proceedings-C, vol. 140, no. 6, November 1993, pp. 497-502.
61. M. H. J. Bollen and P. E. Dirix, Simple motor models for reliability/power quality assessment of industrial power systems, IEE Proceedings—Generation, Transmission, Distribution, vol. 143, no. 1, January 1996, pp. 56-60.
62. M. H. J. Bollen, Reliability analysis of industrial power systems taking into account voltage sags, IEEE Industry Applications Society Annual Meeting, Toronto, Canada, October 1993, pp. 1461-1468.
63. M. R. Qader, M. H. J. Bollen, and R. N. Allan, Stochastic prediction of voltage sags in the reliability test system, PQA-97 Europe, June 1997, Elforsk, Stockholm, Sweden.
64. M. B. Hughes and J. S. Chan, Early experiences with the Canadian national power quality survey, Transmission and Distribution International, vol. 4, no. 3, September 1993, pp. 1827.
65. D. O. Koval, R. A. Bocancea, and M. B. Hughes, Canadian national power quality survey: Frequency of industrial and commercial voltage sags, IEEE Transactions on Industry Applications, vol. 35, no. 5, September 1998, pp. 904-910.
66. H. Seljeseth and A. Pleym, Spenningskvalitetsmalinger 1992 until 1996 (voltage quality measurements, 1992 to 1996, in Norwegian), Report EFI TR A4460 published by EFI, 7034 Trondheim, Norway.
67. D. S. Dorr, Point of utilization power quality study results, IEEE Transactions on Industry Applications, vol. 31, no. 4, July 1995, pp. 658-666.
68. R. E. Jurewicz, Power quality study—1990 to 1995, Int. Telecommunications Energy Conf. (INTELEC), October 1990, Orlando, FL, pp. 443-450.
69. E. W. Gunther and H. Mehta, A survey of distribution system power quality—preliminary results, IEEE Transactions on Power Delivery, vol. 10, no. 1, January 1995, pp. 322-329.
70. M. R. Qader, Stochastic assessment of voltage sags due to short circuits in electrical networks, PhD thesis, UMIST, Manchester, U.K., 1997.
71. M. Goldstein and P. D. Speranza, The quality of U.S. commercial AC power, Int. Telecommunications Energy Conf. (INTELEC), October 1982; Washington, DC, pp. 28-33.
72. IEEE reliability test system, IEEE Transactions on Power Apparatus and Systems, vol. 98, no. 6, November 1979, pp. 2047-2054.
73. M. R. Qader, M. H. J. Bollen, and R. N. Allan, Stochastic prediction of voltage sags in a large transmission system, IEEE Transactions on Industry Applications, vol. 35, no. 1, January 1999, pp. 152-162.
74. R. C. Dugan, M. F. McGranaghan, and H. W. Beaty, Electric Power Systems Quality, McGraw Hill, New York, 1996.
75. W. E. Kazibwe and M. H. Sendaula, Electric Power Quality Control Techniques, Van Nostrad Reinhold, New York.
76. G. T. Heydt, Electric power quality, West LaFayette, In: Stars in a Circle, 1991. Only obtainable from Stars in a circle publications, 2932 SR 26W, West LaFayette, IN, 47906.
77. IEEE recommended practice for powering and grounding sensitive electronic equipment, IEEE Std. 1100-1992.
78. Electromagnetic compatibility (EMC), Part 1: General, Section 1: Application and interpretation of fundamental definitions and terms, IEC 61000-1-1.
79. European standard EN-50160, Voltage characteristics of electricity supplied by public distribution systems, CENELEC, Brussels, Belgium, 1994.
80. IEC Std. 61000-4-15, Flickermeter—functional and design characteristics, IEC, Geneva, Switzerland, 1997.
81. IEEE Standard 519, Recommended practices and requirements for harmonic control in electrical power systems, ANSI/IEEE Std. 519-1992, IEEE, New York, 1993.
82. CIGRE Working Group 26-05, Harmonics, characteristic parameters, method of study, estimates of existing values in the network, Electra, no. 77, July 1981, pp. 35-54.
83. R. Billinton and R. N. Allan, Reliability Evaluation of Power Systems, 2nd ed., New York: Plenum, 1996.
84. R. Billinton and R. N. Allan, Reliability Assessment of Large Electric Power Systems, Boston: Kluwer, 1988.
85. R. Billinton and W. Li, Reliability Assessment of Electric Power Systems Using Monte Carlo Simulation, New York: Plenum, 1994.
86. J. Endreyni, Reliability Modeling in Electric Power Systems, New York: John Wiley and Sons, Ltd., 1978.
87. F. W. Kloeppel, Zuverlässigkeit von Elektroenergiesystemen, Leipzig, Germany: Verlag für Grondstoffenindusirie, 1990.
88. H. D. Kochs, Zuverlässigkeit Elektrotechnische Anlagen, Berlin: Springer, 1984.
89. R. N. Allan, R. Billinton, and S. H. Lee, Bibliography on the application of probability methods in power system reliability evaluation 1977-1982, IEEE Transactions on Power Apparatus and Systems, vol. 103, no. 2, February 1984, pp. 275-282.
90. R. N. Allan, R. Billinton, S. M. Shahidehpour, and C. Singh, Bibliography on the application of probability methods in power system reliability evaluation 1982-1987, IEEE Transactions on Power Systems, vol. 3, no. 4, February 1994, pp. 1555-1564.
91. R. N. Allan, R. Billinton, A. M. Briepohl, and C. H. Grigg, Bibliography on the application of probability methods in power system reliability evaluation 1987-1991, IEEE Transactions on Power Systems, vol. 9, no. 1, February 1994, pp. 41-49.
92. Composite power system reliability: Phase 1—scoping study. Final report, EPRI EL-5290, Palo Alto, CA: Electric Power Research Institute, December 1987.
93. CIGRE Working Group 38.03, Power System Reliability Analysis—Application Guide. Paris: CIGRE publications, 1988.
94. H. H. Kajihara, Quality power for electronics, Electro-Technology, vol. 82, no. 5, November 1968, p. 46.
95. D. J. Hucker, Aircraft a.c. electric system power quality, Proceedings of the IEEE National Aerospace Electronics Conference, May 1970, Dayton, OH, pp. 426-430.
96. R. K. Walter and H. Heinzmann, A customer discusses airborne static power conversion, Conference Record of the 4th Annual Meeting of the IEEE Industry and General Applications Group, October 1969, Detroit, MI, pp. 611-616.
97. D. L. Plette, The effects of improved power quality on utilization equipment, Proceedings of the IEEE National Aerospace Electronics Conference, May 1969, Dayton, OH, pp. 243-250.
98. R. H. McFadden, Power system analysis—what it can do to industrial plants, Conference Record of the 5th Annual Meeting of the IEEE Industry and General Applications Group, October 1970, Chicago, IL, pp. 189-199. This paper also appeared in IEEE Transactions on Industry and General Applications, vol. 7, no. 2, March 1971, pp. 181-188.
99. P. M. Knoller and L. Lonnstam, Voltage quality and voltage tendency recorders, Siemens-Review, vol. 36, no. 8, August 1969, pp. 302-303.
100. A. Lidholm, Mättekniska hjälpmedel for bestämning av spänningsgodheten i lägspännings-nät (Measuring techniques applicable to the determination of voltage quality in low-voltage networks, in Swedish), ERA, vol. 42, no. 5, 1969, pp. 99-101.
101. B. A. Konstantinov and G. L. Bagiev, Financial losses due to deterioration of voltage quality, Electric-Technology-USSR, vol. 1, 1970, pp. 119-123.
102. R. D. Hof, The “dirty power” clogging industry's pipeline, Business Week, April 8, 1991.
103. J. Douglas, Quality of power in the electronics age, EPRI Journal, vol. 10, no. 9, November 1985, pp. 6-13.
104. W. E. Kazibwe, R. J. Ringlee, G. W. Woodzell, and H. M. Sendaula, Power quality: A review, IEEE Computer Applications in Power, vol. 3, no. 1, January 1990, pp. 39-42.
105. F. Martzloff, Power quality work at the International Electrotechnical Commission, PQA-97 Europe, June 1997, Stockholm, Sweden, Elforsk: Stockholm, Sweden.
106. M. H. J. Bollen, Literature search for reliability data of components in electric distribution networks, Eindhoven University of Technology Research Report 93-E-276, August 1993.
107. Basnivo för elkvalitet (Basic level for quality of electricity, in Swedish), Göteborg Energi nät AB, Gothenburg, Sweden, January 1997.
108. The Office of Electricity Regulation (OFFER), Birmingham, U.K., annually publishes two reports on the quality of the supply: Report on distribution and transmission system performance; and Report on customer services.
109. P. C. M. van Kruining, J. H. P. Lommert, H. H. Overbeek, and R. J. R. Waumans, eds., Elektriciteitsdistributienetten (Electricity distribution networks, in Dutch), Deventer, The Netherlands: Kluwer Techniek, 1996.
110. R. J. R. Waumans, Openbare Netten voor Electriciteitsdistributie, Deventer, The Netherlands: Kluwer, 1986.
111. M. H. A. J. Hendriks Boers and R. M. L. Frenken, Help! De klant kan kiezen (Help, the customer is allowed to choose, in Dutch), Energie techniek, vol. 75, no. 12, December 1997, pp. 682-685.
112. M. H. J. Bollen and A. Boyd, Instability problems in small power systems with more than one centre of generation, Universities Power Engineering Conf, September 1995, Greenwich, U.K., pp. 191-194.
113. E. Lakervi and E. L Holmes, Electricity Distribution Network Design, 2nd ed., Institution of Electrical Engineers, London, U.K., 1995, Chapters 4 and 12.
114. J. A. Burke, Power Distribution Engineering, Fundamentals and Applications, New York: Marcel Dekker, 1994, Chapters 6 and 7.
115. F. S. Prabhakara, R. L. Smith, and R. P. Stratford, Industrial and Commercial Power Systems Handbook, New York: McGraw-Hill, 1996, Chapter 11.
116. The INSPEC database has been accessed via the WebSPIRS server.
117. The IEEE standard dictionary of electrical and electronics terms, 6th ed., IEEE Std. 1001996, IEEE, New York, 1997.
118. Engineering Recommendation P2/5: Power system design.
119. Electricity Plan 1997-2006, and Notes to the Electricity Plan 1997-2006, N.V. September/Dutch Electricity Generating Board, Arnhem, The Netherlands, 1996.
120. R. L. Capra, M. W. Sangel, and S. V. Lyon, Underground distribution system design for reliability, IEEE Transactions on Power Apparatus and Systems, vol. 88, no. 6, June 1969, pp. 834-842.
121. N.E. Chang, Evaluate distribution system design by cost reliability indices, IEEE Transactions on Power Apparatus and Systems, vol. 96, no. 5, September 1977, pp. 1480-1490.
122. B. H. T. Smeets and M. H. J. Bollen, Stochastic modelling of protection systems—comparison of four mathematical techniques, Eindhoven University of Technology Research Report 95-E-291, June 1995.
123. J. W. H. Bär, H. L. Doppen, H. Juckers, H. M. A. Konings, P. Wiersma, H. Zuijderduin, and M. J. Voeten, Onderhoudsanalyse (Maintenance analysis, in Dutch), VEEN, Commissie Onderhoudsvraagstukken, Arnhem, The Netherlands, 1990.
124. E. T. Parascos and J. A. Arceri, Reliability engineering and underground equipment failure, costs and manufacturer’s analysis, 3rd Annual Reliability Engineering Conf., September 1976, Montreal, Canada, pp. 25-30.
125. D. A. Ducket and C. M. McDonough, A guide for transformer replacement based on reliability and economics, Rural Electric Power Conference, April 1990, Orlando, FL.
126. N. E. Wiseman, Reliability testing, 3rd Annual Reliability Engineering Conf, September 1976, Montreal, Canada, pp. 21-24.
127. T. Kawamura, M. Horikoshi, S. Kabayashi, and K. Hamamoto, Progress of substation maintenance based on records of operation and maintenance, Int. Conf. on Large High Voltage Electric Systems (CIGRE), August 1990, paper 23-102.
128. G. Wacker and R. Billinton, Customer costs of electric service interruptions, Proceedings of the IEEE, vol. 77, no. 6, June 1989, pp. 919-930.
129. A. Mäkinen, J. Partanen, and E. Lakervi, A practical approach to estimating future outage costs in power distribution networks, IEEE Transactions on Power Delivery, vol. 5, no. 1, January 1990, pp. 313-316.
130. A. M. Shaalan, Electric service interruptions: Impacts and costs estimation, Electra (CIGRE), no. 127, 1989, pp. 89-109.
131. G. Wacker, E. Wojczynski, and R. Billinton, Interruption cost methodology and results— A Canadian residential survey, IEEE Transactions on Power Apparatus and Systems, vol. 102, no. 10, October 1983, pp. 3385-3392.
132. S. Burns and G. Gross, Value of service reliability, IEEE Transactions on Power Systems, vol. 5, no. 3, August 1990, pp. 825-834.
133. IEEE Project Group 1159.2, Recommended practices for the characterization of a power quality event, draft 1, March 1998.
134. P. C. Krause, O. Wasynczuk, and S. D. Sudhoff, Analysis of electric machinery, New York: IEEE Press, 1995.
135. G. Yalçinkaya, The influence of induction motors on voltage sags due to short circuits, PhD thesis, University of Manchester Institute of Science and Technology, Manchester, U.K., October 1997.
136. G. Yalçinkaya, M. H. J. Bollen, and P. A. Crossley, Characterisation of voltage sags in industrial distribution systems, IEEE Transactions on Industry Applications, vol. 34, no. 4, July 1998, pp. 682-688.
137. E. Camm, Preventing nuisance tripping during overvoltages caused by capacitor switching, in: P. Pilay, Ed., “Motor drive/power systems interactions”, IEEE Industry Applications Society Tutorial Course, October 1997.
138. C. M. Warren, The effect of reducing momentary outages on distribution reliability indices, IEEE Transactions on Power Delivery, vol. 7, no. 3, July 1992, pp. 1610-1617.
139. Standards coordinating committee SCC-22: Charter, www.standards.ieee.org.
140. T. Larsson, Voltage source converters for mitigation of flicker caused by arc furnaces, PhD thesis, Royal Institute of Technology, Department of Electric Power Engineering, Stockholm, Sweden, 1998.
141. P. M. Anderson and R. G. Farmer, Series compensation of power systems, Section 7.3, Lamp Flicker, PBLSHI, Encinitas, CA, 1996.
142. J. G. Kappenman and V. D. Albertson, Bracing for the geomagnetic storms, IEEE Spectrum, vol. 27, no. 3, March 1990, pp. 27-33.
143. A. Lui, Ferroresonant overvoltages in electrical distribution systems, MSc thesis, University of Manchester Institute of Science and Technology, Manchester, U.K., March 1997.
144. H. J. Koglin, E. Roos, H. J. Richter, U. Scherer, and W. Wellssow, Experience in the reliability evaluation of high voltage networks, Int. Conf. on Large High Voltage Electric Networks (CIGRE), September 1986, Paris, France.
145. M. Mitra and S. K. Basu, On some properties of the bathtub failure rate family of lifetime distributions, Microelectronics and Reliability, vol. 36, no. 5, May 1996, pp. 679-684.
146. L. V. Skof, Customer interruption costs vary widely, Electrical World, vol. 188, no. 2, July 15, 1977, pp. 64-65.
147. E. C. Ifeachor and B. W. Jervis, Digital Signal Processing: A Practical Approach, Wokingham, England: Addison-Wesley, 1993.
148. Cigre Working Group 34.01, Reliable fault clearance and back-up protection, Final report, August 1997.
149. K. Benson and J. R. Chapman, Boost converters provide power dip ride-through for ac drives, Power Quality Assurance Magazine, July 1997.
150. PQTN Brief No. 34, Performance of an ASD ride-through device during voltage sags, EPRI PEAC, Knoxville, TN, May 1996.
151. J. Svensson, Synchronisation methods for grid-connected voltage source converters, IEE Proceedings—Electric Power Applications, in print.
152. J. Svensson, Grid-connected voltage source converter-control principles and wind energy applications, PhD thesis, Chalmers University of Technology, School of Electrical and Computer Engineering, Gothenburg, Sweden, 1998. Technical Report No. 331.
153. R. de Graaff, Simulating the behavior of AC and DC adjustable-speed drives during voltage sags, project report, Chalmers University of Technology, Dept, of Electric Power Engineering, Gothenburg, Sweden, September 1997.
154. L. E. Conrad, personal communication.
155. D. L. Brooks, R. C. Dugan, M. Waclawiak, and A. Sundaram, Indices for assessing utility distribution system RMS variation performance, IEEE Transactions on Power Delivery, vol. 13, no. 1, January 1998, pp. 254-259.
156. P. Wang, N. Jenkins, and M. H. J. Bollen, Experimental investigation of voltage sag mitigation by an advanced Static VAr Compensator, IEEE Transactions on Power Delivery, vol. 13, no. 4, October 1998, pp. 1461-1467.
157. J. Lamoree, L. Tang, C. DeWinkel, and P. Vinett, Description of micro-SMES system for protection of critical customer facilities, IEEE Transactions on Power Delivery, vol. 9, no. 2, April 1994, pp. 984-991.
158. C. S. Hsu and W. J. Lee, Superconducting magnetic energy storage for power system applications, IEEE Transactions on Industry Applications, vol. 29, no. 5, September 1993, pp. 990-996.
159. R. H. Lasseter and S. G. Jalali, Power conditioning systems for superconductive magnetic energy storage, IEEE Transactions on Energy Conversion, vol. 6, no. 3, September 1991, pp. 381-387.
160. R. H. Lasseter and S. G. Jalali, Dynamic response of power conditioning system for superconductive magnetic energy storage, IEEE Transactions on Energy Conversion, vol. 6, no.3, September 1991, pp. 388-391.
161. I. D. Hassan, R. M. Bucci, and K. T. Swe, 400 MW SMES power conditioning system development and simulation, IEEE Transactions on Power Electronics, vol. 8, no. 3, July 1993, pp. 237-249.
162. T. W. Diliberti, V. E. Wagner, J. P. Staniak, S. L. Sheppard, and T. L. Orfloff, Power quality requirements of a large industrial user: a case study, IEEE Industrial and Commercial Power Systems Technical Conference, Detroit, MI, May 1990, pp. 1-4.
163. T. Gönen, Electric Power Distribution System Engineering, New York: McGraw-Hill, 1986.
164. R. C. Settembrini, J. R. Fisher, and N. E. Hudak, Reliability and quality comparisons of electric power distribution systems, IEEE Transmission and Distribution Conf, September 1991, Dallas, TX, pp. 704-712.
165. R. W. DeDoncker, W. T. Eudy, J. A. Maranto, H. Mehta, and J. W. Schwartzenberg, Medium voltage subcycle transfer switch, Power Quality Assurance, July 1995, pp. 46-51.
166. T. H. Ortmeyer and T. Hiyama, Coordination of time overcurrent devices with voltage sag capability curves, IEEE Int. Conf on Harmonics and Quality of Power (ICHPQ), Las Vegas, NV, October 1996, pp. 280-285.
167. S. M. Schoenung, W. R. Meier, and R. L. Bieri, Small SMES technology and cost reduction estimates, IEEE Transactions on Energy Conversion, vol. 9, no. 2, June 1994, pp. 231237.
168. J. J. Skiles, R. L. Kustom, K.-P. Ko, V. Wong, K.-S. Ko, F. Vong, and K. Klontz, Performance of a power conversion system for superconducting magnetic energy storage (SMES), IEEE Transactions on Power Systems, vol. 11, no. 4, November 1996, pp. 1718-1723.
169. A. van Zyl, J. H. R. Enslin, and R. Spée, Converter-based solution to power quality problems on radial distribution lines, IEEE Transactions on Industry Applications, vol. 32, no. 6, November 1996, pp. 1323-1330.
170. N. Woodley, M. Sarkozi, F. Lopez, V. Tahiliani, and P. Malkin, Solid-state 13-kV distribution class circuit breaker: planning, development and demonstration, IEE Conf on Trends in Distribution Switchgear, November 1994, London, U.K., pp. 163-167.
171. R. J. Lawrie, Power system design for ultra-reliability, Electric Construction and Maintenance, vol. 89, no. 5, May 1990, pp. 55-64.
172. J. W. Schwartzenberg and R. W. DeDoncker, 15 kV medium voltage transfer switch, IEEE Industry Applications Society Annual Meeting, October 1995, Orlando, FL, pp. 2515-2520.
173. S. W. Middlekauff and E. R. Collins, System and customer impact: considerations for series custom power devices, IEEE Transactions on Power Delivery, vol. 13, no. 1, January 1998, pp. 278-282.
174. R. K. Smith, P. G. Slade, M. Sarkozi, E. J. Stacey, J. J. Bonk, and H. Mehta, Solid state distribution current limiter and circuit breaker: Application requirements and control strategies, IEEE Transactions on Power Delivery, vol. 8, no. 3, July 1993, pp. 1155-1164.
175. J. A. Aspinall et al., eds., Power System Protection, Institution of Electrical Engineers, London, U.K., 1995.
176. The National Grid Company Seven-Year Statement for the Years 1994/5 to 2000/2001, Coventry, U.K.: National Grid Company, July 1994.
177. H. Akagi, Y. Kanazawa, and A. Nabae, Instantaneous reactive power compensators comprising switching devices without energy storage components, IEEE Transactions on Industry Applications, vol. 20, no. 3, May 1984, pp. 625-630.
178. W. M. Grady, M. J. Samotyj, and A. H. Noyola, Survey of active power line conditioning methodologies, IEEE Transactions on Power Delivery, vol. 5, no. 3, July 1990, pp. 1536-1542.
179. C. Schauder, M. Gerhardt, E. Stacey, T. W. Cease, A. Edris, T. Lemak, and L. Guygyi, Development of a 100 MVar static condenser for voltage control of transmission systems, IEEE Transactions on Power Delivery, vol. 10, no. 3, July 1995, pp. 1486-1496.
180. L. Guygyi, C. D. Schauder, S. L. Williams, T. R. Rietman, D. R. Torgerson, and A. Edris, The unified power flow controller: A new approach to power transmission control, IEEE Transactions on Power Delivery, vol. 10, no. 2, April 1995, pp. 1085-1097.
181. H. Akagi, Trends in active power line conditioners, IEEE Transactions on Power Electronics, vol. 9, no. 3, May 1994, pp. 263-268.
182. H. Akagi, New trends in active filters for power conditioning, IEEE Transactions on Industry Applications, vol. 32, no. 6, November/December 1996, pp. 1312-1322.
183. N. H. Woodley, M. Sarkozi, A. Sandaram, and G. A. Taylor, Custom power: The utility solution, Int. Conf. on Electricity Distribution (Cl RED), May 1995, Brussels, Belgium, vol. 5, pp. 9/1-6.
184. IEE Colloquium of Dynamic Voltage Restorers—Replacing those missing cycles, Institution of Electrical Engineers, London, U.K., IEE Digest No. 1998/189.
185. B. Bhargava and G. Dishaw, Application of an energy source power system stabilizer on the 10 MW battery energy storage system at Chino substation, IEEE Transactions on Power Systems, vol. 13, no. 1, February 1998, pp. 145-151.
186. S. J. Chiang, C. M. Liaw, W. C. Chang, and W. Y. Chang, Multi-module parallel small battery energy storage system, IEEE Transactions on JZnergy Conversion, vol. 11, no. 1, March 1996, pp. 146-154.
187. N. W. Miller, R. S. Zrebiec, R. W. Delmerico, and G. Hunt, Design and commissioning of a 2.5 MWh battery energy storage system, Int. Conf. on Electricity Distribution (ClRED), June 2-5, 1997, Birmingham, U.K., vol. 2, pp. 10/1-5.
188. P. Pillay, A switched reluctance drive with improved ride-through capability, in: “Motor drive/power system interactions”, IEEE Tutorial Course 97 TP 123, October 1997.
189. B. G. Johnson, K. P. Adler, G. V. Anastas, J. R. Dowver, D. B. Eisenhaure, J. H. Goldie, and R. L. Hockney, Design of a torpedo inertial power storage unit (TIPSU), Intersociety Energy Conversion Engineering Conference, August 1990, Reno, NV, vol. 4, pp. 199-204.
190. N. G. Hingorani, Introducing custom power, IEEE Spectrum, vol. 32, no. 6, June 1995, pp. 41-47.
191. J. R. Hull, Flywheels on a roll, IEEE Spectrum, vol. 34, no. 7, July 1997, pp. 20-25.
192. R. T. Morash, J. F. Roesel, and R. J. Barber, Improved power quality with written-pole motor-generators and written-pole motors, 3rd Int. Conf. on Power Quality: End-use applications and perspectives (PQA 94), October 1994, Amsterdam, The Netherlands. Paper D-2.10.
193. J. Arrillaga, D. Bradley, and P. S. Bodger, Power System Harmonics, London: John Wiley and Sons, Ltd., 1985.
194. J. Arrillaga, B. C. Smith, N. R. Watson, and A. R. Wood, Power System Harmonic Analysis, Chichester: John Wiley and Sons, Ltd., 1997.
195. A. Larsson, M. Lundmark, and J. Hagelberg, Increased pollution in the protective earth, European Conf. on Power Electronics and Applications, Trondheim, Norway, September 8-10, 1997.
196. C. R. Heising, Worldwide reliability survey of high-voltage circuit breakers, IEEE Industry Applications Magazine, vol. 2, no. 3, May 1996, pp. 65-66.
197. IEEE standard terms for reporting and analyzing outage occurences and outage states of electrical transmission facilities, IEEE Std. 859-1993.
198. G. A. Taylor, J. E. Hill, A. B. Burden, and K. Mattern, Responding to the changing demands of lower voltage networks—the utilisation of custom power systems, Int. Conf on Large Electric Networks (CIGRE), Session 1998, Paris, France, August 1998, paper 14-303.
199. Avbrottskostnader för elkunder (Interruption costs for electricity customers, in Swedish), Svenska Elverksföreningen, Stockholm, Sweden, 1994.
200. N. S. Tunaboyla and E. R. Collins, The wavelet transform approach to detect and quantify voltage sags, 7th Int. Conf. on Harmonics and Quality of Power, October 1996, Las Vegas, NV, pp. 619-624.
201. O. Poisson, P. Rioual, and M. Meunier, Detection and measurement of power quality disturbances using wavelet transform, 8th. Int. Conf. on Harmonics and Quality of Power, Athens, Greece, October 1998, pp. 1125-1130.
202. L. D. Zhang and M. H. J. Bollen, A method for characterizing unbalanced voltage dips (sags) with symmetrical components, IEEE Power Engineering Review, vol. 18, no. 7, July 1998, pp. 50-52.
203. L. D. Zhang and M. H. J. Bollen, Characteristics of voltage dips (sags) in power systems, 8th. Int. Conf on Harmonics and Quality of Power, Athens, Greece, October 1998, pp. 555-560.
204. G. Desuilbet, C. Foucher, and P. Fauquembergue, Statistical analysis of voltage dips, 3rd. Int. Conf on Power Quality: End-use applications and perspectives, October 1994, Amsterdam, The Netherlands.
205. B. K. Bose, Ed., Power Electronics and Variable Frequency Drives—Technology and Applications, New York: IEEE Press, 1997.
206. E. W. Kimbark, Power System Stability, New York: IEEE Press, 1995.
207. N. Carter, Improvements in network performance on urban and rural 11 kV networks, In: Improving Power Quality in Transmission and Distribution, January 1998, Amsterdam, IBC Technical Services, London, U.K., 1998.
208. H. L. Willis, Power Distribution Planning Reference Book, New York: Marcel Dekker, 1997.
209. G. T. Heydt, W. Tan, T. LaRose, and M. Negley, Simulation and analysis of series voltage boost technology for power quality enhancement, IEEE Transactions on Power Delivery, vol. 13, no. 4, October 1998, pp. 1335-1341.
210. J. Lundquist, Omriktare och olinjàra laster i elektriska nàt (Converters and nonlinear load in electric power systems, in Swedish), MSc Report, Hògskolan i Skòvde, Skòvde, Sweden, December 1996.
211. R. Hart, HV overhead line—the Scandinavian experience, Power Engineering Journal, June 1994, pp. 119-123.
212. M. W. Vogt, T2 ACSR conductors: lessons learned, IEEE Industry Applications Magazine, vol. 4, no. 3, May 1998, pp. 37-39.
213. Recommended practice for electric power distribution for industrial plants (IEEE Red Book), lEEEStd. 141-1993.
214. H. C. Tijms, Stochastic Models: An Algorithmic Approach. Chichester, U.K.: Wiley, 1994.
215. K. K. Kariuki and R. N. Allan, Factors affect: ng customer outage costs due to electric service interruptions, IEE Proceeding—Generatk n, Transmission, Distribution, vol. 143, no. 6, November 1996, pp. 521-528.