An integrated prognostics method under time-varying operating conditions

IEEE Transactions on Reliability

Volumn 64, Issue 2, 2015, Pages 673-686

  Zhao, Fuqiong ^a   Tian, Zhigang ^a   Bechhoefer, Eric ^b   Zeng, Yong ^c  

^a UNIVERSITY OF ALBERTA   (Canada)

^b Green Power Monitoring Systems LLC   (United States)

^c Concordia University ^*  (Canada)

Author keywords

Bayesian update; integrated prognostics; polynomial chaos expansion; time varying operating condition; uncertainty quantification

Indexed keywords

BAYESIAN NETWORKS; CONDITION MONITORING; GEARS; INFERENCE ENGINES; STRESS ANALYSIS; SYSTEMS ENGINEERING;

BAYESIAN; INTEGRATED PROGNOSTICS; OPERATING CONDITION; POLYNOMIAL CHAOS EXPANSION; UNCERTAINTY QUANTIFICATIONS;

FINITE ELEMENT METHOD;

EID: 85027956744     PISSN: 00189529     EISSN: None     Source Type: Journal    
DOI: 10.1109/TR.2015.2407671     Document Type: Article

References (48)

1. A. K. S. Jardine, D. M. Lin, and D. Banjevic, "A review on machinery diagnostics and prognostics implementing condition-based maintenance," Mech. Syst. Signal Process., vol. 20, no. 7, pp. 1483-1510, 2006.
2. D. Banjevic, A. K. S. Jardine, V. Makis, and M. Ennis, "A control-limit policy and software for condition-based maintenance optimization," INFOR, vol. 39, no. 1, pp. 32-50, 2001.
3. N. Gebraeel, M. A. Lawley, and R. Liu, "Residual life, predictions from vibration-based degradation signals: A neural network approach," IEEE Trans. Ind. Electron., vol. 51, no. 3, pp. 694-700, 2004.
4. N. Gebraeel and M. A. Lawley, "A neural network degradation model for computing and updating residual life distributions," IEEE Trans. Autom. Sci. Eng., vol. 5, no. 1, pp. 154-163, 2008.
5. N. Gebraeel, M. Lawley, R. Li, and J. K. Ryan, "Life distributions from component degradation signals: A Bayesian approach," IIE Trans. Qual. Reliab. Eng., vol. 37, no. 6, pp. 543-557, 2005.
6. C. J. Li and H. Lee, "Gear fatigue crack prognosis using embedded model, gear dynamic model and fracture mechanics," Mech. Syst. Signal Process., vol. 19, no. 4, pp. 836-846, 2005.
7. G. J. Kacprzynski, A. Sarlashkar, M. J. Roemer, A. Hess, and G. Hardman, "Predicting remaining life by fusing the physics of failure modeling with diagnostics," J. Minerals, Metals Mater. Soc., vol. 56, no. 3, pp. 29-35, 2004.
8. S. Marble and B. P. Morton, "Predicting the remaining life of propulsion system bearings," in Proc. 2006 IEEE Aerospace Conf., Big Sky, MT, USA, 2006.
9. S. Glodez, M. Sraml, and J. Kramberger, "A computational model for determination of service life of gears," Int. J. Fatigue, vol. 24, no. 10, pp. 1013-1020, 2002.
10. A. Coppe, R. T. Haftka, and N. H. Kim, "Uncertainty reduction of damage growth properties using structural health monitoring," J. Aircraft, vol. 47, no. 6, pp. 2030-2038, 2010.
11. D. An, J. Choi, and N. H. Kim, "Identification of correlated damage parameters under noise and bias using Bayesian inference," Struct.Health Monit., vol. 11, no. 3, pp. 293-303, 2012.
12. M. E. Orchard and G. J. Vachtsevanos, "A particle filtering approach for on-line failure prognosis in a planetary carrier plate," Int. J. Fuzzy LogicIntell. Syst., vol. 7, no. 4, pp. 221-227, 2007.
13. M. E. Orchard and G. J. Vachtsevanos, "A particle filtering-based framework for real-time fault diagnosis and failure prognosis in a turbine engine," in Proc. 2007 Mediterranean Conf. Control Autom., Athens, Greece, 2007.
14. S. Sankararaman, Y. Ling, and S. Mahadevan, "Confidence assessment in fatigue damage prognosis," in Proc. Annu. Conf. Prognos. Health Manag. Soc., Portland, OR, USA, 2010.
15. E. Bechhoefer, A. Bernhard, and D. He, "Use of Paris law for prediction of component remaining useful life," in Proc. 2008 IEEE Aerospace Conf., Big Sky, MT, USA, 2008.
16. R. B. Abernethy, The New Weibull Handbook, 2nd ed. North Palm Beach, FL, USA: Abernethy, 1996.
17. D. R. Cox, "Regression models and life-tables," J. Roy. Statist. Soc. Ser. B., vol. 34, no. 2, pp. 187-220, 1972.
18. Z. Tian, L. Wong, and N. Safaei, "A neural network approach for remaining useful life prediction utilizing both failure and suspension histories," Mech. Syst. Signal Process., vol. 24, no. 5, pp. 1542-1555, 2010.
19. Z. Tian and M. J. Zuo, "Health condition prediction of gears using a recurrent neural network approach," IEEE Trans. Reliab., vol. 59, no. 4, pp. 700-705, Dec. 2010.
20. N. Gebraeel and J. Pan, "Prognostic degradation models for computing and updating residual life distributions in a time-varying environment," IEEE Trans. Reliab., vol. 57, no. 4, pp. 539-550, Dec. 2008.
21. H. Liao and Z. Tian, "A framework for predicting the remaining useful life of a single unit under time-varying operating conditions," IIE Trans., vol. 45, no. 9, pp. 964-980, 2013.
22. P. C. Paris and F. Erdogen, "A critical analysis of crack propagation laws," J. Basic Eng., vol. 85, no. 4, pp. 528-534, 1963.
23. S. Sankararaman, Y. Ling, and S. Mahadevan, "Uncertainty quantification and model validation for fatigue crack growth prediction," Eng. Fract. Mech., vol. 78, pp. 1487-1504, 2011.
24. B. J. Debusschere, H. N. Najm, P. P. Lébay, O. M. Knio, R. G. Ghanem, and O. P. Le Maître, "Numerical challenges in the use of polynomial chaos representations for stochastic process," Siam J. Sci.Comput., vol. 26, pp. 698-719, 2004.
25. M. S. Eldred, C. G. Webster, and P. Constantine, "Evaluation of non-intrusive approaches for Wiener-Askey generalized polynomial chaos," in Proc. 10th AIAA Nondeterministic Approaches Conf., Schaumburg, IL, USA, 2008.
26. M. T. Reagan, H. N. Najm, B. J. Debusschere, O. P. L. Maître, O. M. Knio, and R. G. Ghanem, "Spectral stochastic uncertainty quantification in chemical systems," Combust. Theor. Model., vol. 8, pp. 607-632, 2004.
27. C. Canuto, M. Y. Hussaini, A. Quarteroni, and T. A. Zang, Spectral Methods in Fluid Dynamics. New York, NY, USA: Springer-Verlag, 1988.
28. H. N. Najm, "Uncertainty quantification and polynomial chaos techniques in computational fluid dynamics," Annu. Rev. Fluid. Mech., vol. 41, pp. 35-52, 2009.
29. D. Xiu and J. S. Hesthaven, "High-order collocation methods for differential equations with random inputs," SIAM J. Sci. Comput., vol. 27, pp. 1118-1139, 2005.
30. Y. M. Marzouk, H. N. Najm, and L. A. Rahn, "Stochastic spectral methods for efficient Bayesian solution of inverse problems," J. Comput. Phys., vol. 224, pp. 560-586, 2007.
31. D. Xiu, Numerical Methods for Stochastic Computations. Princeton, NJ, USA: Princeton Univ. Press, 2010.
32. F. Zhao, Z. Tian, and Y. Zeng, "A stochastic collocation approach for efficient integrated gear health prognosis," Mech. Syst. Signal Process., vol. 39, pp. 372-387, 2013.
33. Y. Marzouk and D. Xiu, "A stochastic collocation approach to Bayesian inference in inverse problem," Commun. Comput. Phys., vol. 6, no. 4, pp. 826-847, 2009.
34. T. L. Anderson, FractureMechanics: Fundamentals and Applications, 3rd ed. New York, NY, USA: Taylor & Francis, 2005.
35. J. E. Collipriest, "An experimentalist's view of the surface flaw problem," The Surface Crack: Phys. Problems Comput. Solutions, Amer. Soc. Mech. Eng., pp. 43-61, 1972.
36. K. Inoue, M. Kato, G. Deng, and N. Takatsu, "Fracture mechanics based of strength of carburized gear teeth," in Proc. JSME Int. Conf. Motion and Power Transmissions, Hiroshima, Japan, 1999.
37. O. E. Wheeler, "Spectrum loading and crack growth," J. Basic Eng. Trans ASME, vol. 94, pp. 181-186, 1972.
38. K. Ortiz and A. S. Kiremidjian, "Stochastic modeling of fatigue crack growth," Eng. Fract. Mech., vol. 29, pp. 317-334, 1988.
39. D. A. Virkler, B. M. Hillberry, and P. K. Goel, The Statistical Nature of Fatigue Crack Propagation, Air Force Dynamics Laboratory, 1978, AFFDL-TR-43-78.
40. Standard Test Method for Measurement of Fatigue Crack Growth Rates, ASTM International, 2000, ASTM E647-00.
41. D. Xiu, "Efficient collocational approach for parametric uncertainty analysis," Commun. Comput. Phys., vol. 2, pp. 293-309, 2007.
42. C. Soize and R. Ghanem, "Physical systems with random uncertainties: Chaos representations with arbitrary probability measure," SIAMJ. Sci. Comput., vol. 26, pp. 395-410, 2004.
43. S. Smolyak, "Quadrature and interpolation formulas for tensor products of certain classes of functions," Soviet Math. Dokl., vol. 4, pp. 240-243, 1963.
44. F. Zhao, Z. Tian, and Y. Zeng, "Uncertainty quantification in gear remaining useful life prediction through an integrated prognostics method," IEEE Trans. Reliab., vol. 62, no. 1, pp. 146-159, Mar. 2013.
45. C. Annis, "Probabilistic life prediction isn't as easy as it looks," in Probabilistic Aspects of Life Prediction, W. S. Johnson and B. M. Hillberry, Eds. West Conshohocken, PA, USA: ASTM International, 2003, ASTM STP-1450.
46. O. Ditlevsen and R. Olesen, "Statistical analysis of the Virkler data on fatigue crack growth," Eng. Fract. Mech., vol. 25, no. 2, pp. 177-195, 1986.
47. Z. A. Kotulski, "On efficiency of identification of a stochastic crack propagation model based on Virkler experimental data," Archives Mech., vol. 50, no. 5, pp. 829-847, 1998.
48. J. C. Butcher, NumericalMethods for Ordinary Differential Equations, 2nd ed. New York, NY, USA: WILEY, 2008.