The evolution of crack seal vein and fracture networks in an evolving stress field: Insights from Discrete Element Models of fracture sealing

Journal of Geophysical Research: Solid Earth

Volumn 119, Issue 12, 2014, Pages 8708-8727

  Virgo, Simon ^a   Abe, Steffen ^a,b   Urai, Janos L ^a  

^a RWTH AACHEN UNIVERSITY   (Germany)

^b Institute for Geothermal Energy Resource Management   (Germany)

Author keywords

crack seal; discrete element method; fracture networks; veins

Indexed keywords

CRACK PROPAGATION; DEFORMATION MECHANISM; DISCRETE CHOICE ANALYSIS; FRACTURE NETWORK; NUMERICAL MODEL; STRESS FIELD; VEIN (GEOLOGY);

JEBEL AKHDAR [OMAN MOUNTAINS]; OMAN; OMAN MOUNTAINS;

EID: 85027939776     PISSN: 21699313     EISSN: 21699356     Source Type: Journal    
DOI: 10.1002/2014JB011520     Document Type: Article

References (94)

1. Abe, S., and, K. Mair, (2005), Grain fracture in 3D numerical simulations of granular shear, Geophys. Res. Lett., 32, L05305, doi: 10.1029/2004GL022123.
2. Abe, S., and, J. L. Urai, (2012), Discrete element modeling of boudinage: Insights on rock rheology, matrix flow, and evolution of geometry, J. Geophys. Res., 117, B01407, doi: 10.1029/2011JB008555.
3. Abe, S., D. Place, and, P. Mora, (2004), A parallel implementation of the lattice solid model for the simulation of rock mechanics and earthquake dynamics, Pure. Appl. Geophys., 161, 2265-2277, Springer, New York.
4. Abe, S., H. van Gent, and, J. L. Urai, (2011), DEM simulation of normal faults in cohesive materials, Tectonophysics, 512 (1-4), 12-21, doi: 10.1016/j.tecto.2011.09.008.
5. Abe, S., J. L. Urai, and, M. Kettermann, (2013), Fracture patterns in nonplane strain boudinage-Insights from 3-D discrete element models, J. Geophys. Res. Solid Earth, 118, 1304-1315, doi: 10.1002/jgrb.50126.
6. Al-Tahini, A. M., C. H. Sondergeld, and, C. S. Rai, (2006), The effect of cementation on the mechanical properties of sandstones, SPE Reservoir Eval. Eng., 9 (04), 308-316, doi: 10.2118/89069-PA.
7. Al-Wardi, M., and, R. W. H. Butler, (2007), Constrictional extensional tectonics in the northern Oman mountains, its role in culmination development and the exhumation of the subducted Arabian continental margin, Geol. Soc. London, Spec. Publ., 272 (1), 187-202, doi: 10.1144/GSL.SP.2007.272.01.11.
8. Ankit, K., B. Nestler, M. Selzer, and, M. Reichardt, (2013), Phase-field study of grain boundary tracking behavior in crack-seal microstructures, Contrib. Mineral. Petrol., 166 (6), 1709-1723, doi: 10.1007/s00410-013-0950-x.
9. Bai, T., and, D. D. Pollard, (2000), Fracture spacing in layered rocks: A new explanation based on the stress transition, J. Struct. Geol., 22 (1), 43-57, doi: 10.1016/S0191-8141(99)00137-6.
10. Barnett, Z. A., and, A. Gudmundsson, (2014), Numerical modelling of dykes deflected into sills to form a magma chamber, J. Volcanol. Geotherm. Res., 281, 1-11, doi: 10.1016/j.jvolgeores.2014.05.018.
11. Barnhoorn, A., S. F. Cox, D. J. Robinson, and, T. Senden, (2010), Stress- and fluid-driven failure during fracture array growth: Implications for coupled deformation and fluid flow in the crust, Geology, 38 (9), 779-782, doi: 10.1130/G31010.1.
12. Belayneh, M., M. Masihi, S. K. Matthäi, and, P. R. King, (2006), Prediction of vein connectivity using the percolation approach: Model test with field data, J. Geophys. Eng., 3 (3), p. 219, doi: 10.1088/1742-2132/3/3/003.
13. Bertram, A., and, J. F. Kalthoff, (2003), Crack propagation toughness of rock for the range of low to very high crack speeds, Key Eng. Mat., 251-252, 423-430, doi: 10.4028/www.scientific.net/KEM.251-252.423.
14. Bieniawski, Z. T., (1968), Fracture dynamics of rock, Int. J. Fract.Mech., 4 (4), 415-430, doi: 10.1007/BF00186807.
15. Bons, P., (2001), Development of crystal morphology during unitaxial growth in a progressively widening vein: I. The numerical model, J. Struct. Geol., 23 (6-7), 865-872, doi: 10.1016/S0191-8141(00)00159-0.
16. Bons, P. D., and, B. P. van Milligen, (2001), New experiment to model self-organized critical transport and accumulation of melt and hydrocarbons from their source rocks, Geology, 29 (10), 919-922, doi: 10.1130/0091-7613(2001)029<0919:NETMSO>2.0.CO;2.
17. Bons, P. D., M. A. Elburg, and, E. Gomez-Rivas, (2012), A review of the formation of tectonic veins and their microstructures, J. Struct. Geol., 43, 33-62, doi: 10.1016/j.jsg.2012.07.005.
18. Breton, J.-P., F. Bechennec, J. Le Metour, L. Moen-Maurel, and, P. Razin, (2004), Eoalpine (Cretaceous) evolution of the Oman Tethyan continental margin: Insights from a structural field study in Jabal Akhdar (Oman Mountains), GeoArabia [Manama], 9 (2), 41-58.
19. Caputo, R., and, P. L. Hancock, (1999), Crack-jump mechanism of microvein formation and its implications for stress cyclicity during extension fracturing, J. Geodyn., 27 (1), 45-60, doi: 10.1016/S0264-3707(97)00029-X.
20. Cook, J., J. E. Gordon, C. C. Evans, and, D. M. Marsh, (1964), A mechanism for the control of crack propagation in all-brittle systems, Proc. R. Soc. London, Ser. A, 282 (1391), 508-520, doi: 10.1098/rspa.1964.0248.
21. Cooke, M. L., and, C. A. Underwood, (2001), Fracture termination and step-over at bedding interfaces due to frictional slip and interface opening, J. Struct. Geol., 23 (2-3), 223-238, doi: 10.1016/S0191-8141(00)00092-4.
22. Cox, S., (2005), Coupling between deformation, fluid pressures, and fluid flow in ore-producing hydrothermal systems at depth in the crust, Economic geology 100th anniversary volume, pp. 39-75.
23. Cox, S. F., and, M. A. Etheridge, (1983), Crack-seal fibre growth mechanisms and their significance in the development of oriented layer silicate microstructures, Tectonophysics, 92 (1-3), 147-170, doi: 10.1016/0040-1951(83)90088-4.
24. Cundall, P. A., and, O. D. L. Strack, (1979), A discrete numerical model for granular assemblies, Géotechnique, 29 (1), 47-65, doi: 10.1680/geot.1979.29.1.47.
25. Donzé, F., (1994), A discrete numerical model for brittle rock deformation, PhD thesis.
26. Durney, D. W., and, J. G. Ramsay, (1973), Incremental Strains Measured by Syntectonic Crystal Growths, edited by, K. A. De Jong, and, K. Scholten, Gravity and Tectonics, Wiley, New York.
27. Dyer, R., (1988), Using joint interactions to estimate paleostress ratios, J. Struct. Geol., 10 (7), 685-699, doi: 10.1016/0191-8141(88)90076-4.
28. Eshelby, J. D., (1957), The determination of the elastic field of an ellipsoidal inclusion, and related problems, Proc. R. Soc. London, Ser. A, 241 (1226), 376-396, doi: 10.1098/rspa.1957.0133.
29. Fisher, D. M., and, S. L. Brantley, (1992), Models of quartz overgrowth and vein formation: Deformation and episodic fluid flow in an ancient subduction zone, J. Geophys. Res., 97 (B13), 20,043-20,061, doi: 10.1029/92JB01582.
30. Gillespie, P. A., J. J. Walsh, J. Watterson, C. G. Bonson, and, T. Manzocchi, (2001), Scaling relationships of joint and vein arrays from The Burren, Co. Clare, Ireland, J. Struct. Geol., 23 (2-3), 183-201.
31. Gomez-Rivas, E., P. D. Bons, D. Koehn, J. L. Urai, M. Arndt, S. Virgo, B. Laurich, C. Zeeb, L. Stark, and, P. Blum, (2014), The Jabal Akhdar Dome in the Oman Mountains: Evolution of a dynamic fracture system, Am. J. Sci., 314 (7), 1104-1139, doi: 10.2475/07.2014.02.
32. Gudmundsson, A., (2011a), Deflection of dykes into sills at discontinuities and magma-chamber formation, Tectonophysics, 500 (1-4), 50-64, doi: 10.1016/j.tecto.2009.10.015.
33. Gudmundsson, A., (2011b), Rock Fractures in Geological Processes, Cambridge Univ. Press, Cambridge, U. K.
34. Gudmundsson, A., and, S. L. Brenner, (2001), How hydrofractures become arrested, Terra Nova, 13 (6), 456-462, doi: 10.1046/j.1365-3121.2001.00380.x.
35. Gudmundsson, A., I. Fjeldskaar, and, S. L. Brenner, (2002), Propagation pathways and fluid transport of hydrofractures in jointed and layered rocks in geothermal fields, J. Volcanol. Geotherm. Res., 116 (3-4), 257-278, doi: 10.1016/S0377-0273(02)00225-1.
36. Gudmundsson, A., T. H. Simmenes, B. Larsen, and, S. L. Philipp, (2010), Effects of internal structure and local stresses on fracture propagation, deflection, and arrest in fault zones, J. Struct. Geol., 32 (11), 1643-1655, doi: 10.1016/j.jsg.2009.08.013.
37. Gupta, V., A. S. Argon, and, Z. Suo, (1992), Crack deflection at an interface between two orthotopic media, J. Appl. Mech., 59 (2S), p. S79, doi: 10.1115/1.2899511.
38. Hancock, P. L., (1985), Brittle microtectonics: Principles and practice, J. Struct. Geol., 7 (3-4), 437-457, doi: 10.1016/0191-8141(85)90048-3.
39. Hardy, S., (2011), Cover deformation above steep, basement normal faults: Insights from 2D discrete element modeling, Mar. Pet. Geol., 28 (5), 966-972, doi: 10.1016/j.marpetgeo.2010.11.005.
40. Hardy, S., K. McClay, and, J. Anton Muñoz, (2009), Deformation and fault activity in space and time in high-resolution numerical models of doubly vergent thrust wedges, Mar. Pet. Geol., 26 (2), 232-248, doi: 10.1016/j.marpetgeo.2007.12.003.
41. Helgeson, D. E., and, A. Aydin, (1991), Characteristics of joint propagation across layer interfaces in sedimentary rocks, J. Struct. Geol., 13 (8), 897-911, doi: 10.1016/0191-8141(91)90085-W.
42. Hilgers, C., (2000), Vein growth in fractures-Experimental, numerical and real rock studies, PhD thesis, RWTH-Aachen Univ., 126 pp.
43. Hilgers, C., (2005), Aspects of material transport and polycrystal growth in fractures [Text.Thesis.Habilitation], RWTH-Aachen Univ.
44. Hilgers, C., and, E. Tenthorey, (2004), Fracture sealing of quartzite under a temperature gradient: Experimental results, Terra Nova, 16 (4), 173-178, doi: 10.1111/j.1365-3121.2004.00545.x.
45. Hilgers, C., and, J. L. Urai, (2002), Microstructural observations on natural syntectonic fibrous veins: Implications for the growth process, Tectonophysics, 352 (3-4), 257-274, doi: 10.1016/S0040-1951(02)00185-3.
46. Hilgers, C., D. L. Kirschner, J.-. P. Breton, and, J. L. Urai, (2006), Fracture sealing and fluid overpressures in limestones of the Jabal Akhdar dome, Oman mountains, Geofluids, 6 (2), 168-184, doi: 10.1111/j.1468-8123.2006.00141.x.
47. Hobbs, D. W., (1967), The formation of tension joints in sedimentary rocks: An explanation, Geol. Mag., 104 (06), 550-556, doi: 10.1017/S0016756800050226.
48. Holland, M., and, J. L. Urai, (2010), Evolution of anastomosing crack-seal vein networks in limestones: Insight from an exhumed high-pressure cell, Jabal Shams, Oman Mountains, J. Struct. Geol., 32 (9), 1279-1290, doi: 10.1016/j.jsg.2009.04.011.
49. Holland, M., J. L. Urai, P. Muchez, and, J. M. Willemse, (2009), Evolution of fractures in a highly dynamic thermal, hydraulic, and mechanical system-(I). Field observations in Mesozoic carbonates, Jabal Shams, Oman Mountains, GeoArabia [Manama], 14 (1), 57-110.
50. Hubert, J., H. Emmerich, and, J. Urai, (2009), Modelling the evolution of vein microstructure with phase-field techniques-A first look, J. Metamorph. Geol., 27 (7), 523-530.
51. Hull, D., (2012), Fractography: Observing, Measuring and Interpreting Fracture Surface Topography, Cambridge Univ. Press, Cambridge, U. K.
52. Jaeger, J., N. G. Cook, and, R. Zimmerman, (2007), Fundamentals of Rock Mechanics, Wiley-Blackwell, Oxford, U. K.
53. Kobchenko, M., A. Hafver, E. Jettestuen, O. Galland, F. Renard, P. Meakin, B. Jamtveit, and, D. K. Dysthe, (2013), Drainage fracture networks in elastic solids with internal fluid generation: EPL, Europhys. Lett., 102 (6), 66002, doi: 10.1209/0295-5075/102/66002.
54. Komorõczi, A., S. Abe, and, J. L. Urai, (2013), Meshless numerical modeling of brittle-Viscous deformation: First results on boudinage and hydrofracturing using a coupling of discrete element method (DEM) and smoothed particle hydrodynamics (SPH), Comput. Geosci., 17 (2), 373-390, doi: 10.1007/s10596-012-9335-x.
55. Ladeira, F. L., and, N. J. Price, (1981), Relationship between fracture spacing and bed thickness, J. Struct. Geol., 3 (2), 179-183, doi: 10.1016/0191-8141(81)90013-4.
56. Lander, R. H., and, O. Walderhaug, (1999), Predicting porosity through simulating sandstone compaction and quartz cementation, AAPG Bull., 83 (3), 433-449.
57. Lander, R. H., and, S. E. Laubach, (2014), Insights into rates of fracture growth and sealing from a model for quartz cementation in fractured sandstones, Geol. Soc. Am. Bull., doi: 10.1130/B31092.1.
58. Laubach, S. E., (1988), Subsurface fractures and their relationship to stress history in East Texas basin sandstone, Tectonophysics, 156 (1-2), 37-49, doi: 10.1016/0040-1951(88)90281-8.
59. Laubach, S. E., (2003), Practical approaches to identifying sealed and open fractures, AAPG Bull., 87 (4), 561-579, doi: 10.1306/11060201106.
60. Laubach, S. E., R. M. Reed, J. E. Olson, R. H. Lander, and, L. M. Bonnell, (2004), Coevolution of crack-seal texture and fracture porosity in sedimentary rocks: Cathodoluminescence observations of regional fractures, J. Struct. Geol., 26 (5), 967-982, doi: 10.1016/j.jsg.2003.08.019.
61. Maeder, X., C. W. Passchier, and, R. A. J. Trouw, (2014), Complex vein systems as a data source in tectonics: An example from the Ugab Valley, NW Namibia, J. Struct. Geol., 62, 125-140, doi: 10.1016/j.jsg.2014.01.011.
62. Mair, K., and, S. Abe, (2008), 3D numerical simulations of fault gouge evolution during shear: Grain size reduction and strain localization, Earth Planet. Sci. Lett., 274 (1-2), 72-81, doi: 10.1016/j.epsl.2008.07.010.
63. Mandl, G., (2005a), Hydraulic fractures, in Rock Joints, pp. 27-48, Springer, Berlin.
64. Mandl, G., (2005b), Termination and spacing of tension joints in layered rocks, in Rock Joints, pp. 49-100, Springer, Berlin.
65. Mura, T., (1987), Micromechanics of Defects in Solids, Springer Science & Business Media, Berlin.
66. Nollet, S., J. L. Urai, P. D. Bons, and, C. Hilgers, (2005), Numerical simulations of polycrystal growth in veins, J. Struct. Geol., 27 (2), 217-230, doi: 10.1016/j.jsg.2004.10.003.
67. Nüchter, J. A., and, B. Stöckhert, (2008), Coupled stress and pore fluid pressure changes in the middle crust: Vein record of coseismic loading and postseismic stress relaxation, Tectonics, 27, TC1007, doi: 10.1029/2007TC002180.
68. Olson, J., and, D. D. Pollard, (1989), Inferring paleostresses from natural fracture patterns: A new method, Geology, 17 (4), p. 345, doi: 10.1130/0091-7613(1989)017<0345:IPFNFP>2.3.CO;2.
69. Özkaya, I., (1988), A simple analysis of oil-induced fracturing in sedimentary rocks, Mar. Pet. Geol., 5 (3), 293-297, doi: 10.1016/0264-8172(88)90008-6.
70. Passchier, C. W., and, R. A. J. Trouw, (2005), Microtectonics, Springer, Berlin.
71. Patrício, M., and, R. M. M. Mattheij, (2010), Crack paths in composite materials, Eng. Fract. Mech., 77 (12), 2251-2262, doi: 10.1016/j.engfracmech.2010.05.005.
72. Philipp, S. L., (2008), Geometry and formation of gypsum veins in mudstones at Watchet, Somerset, SW England, Geol. Mag., 145 (06), doi: 10.1017/S0016756808005451.
73. Philipp, S. L., (2012), Fluid overpressure estimates from the aspect ratios of mineral veins, Tectonophysics, 581, 35-47, doi: 10.1016/j.tecto.2012.01.015.
74. Place, D. G., and, P. R. Mora, (2001), A random lattice solid model for simulation of fault zone dynamics and fracture process, Bifurcation and localisation theory for soils and Rocks'99, v. 1.
75. Potyondy, D. O., and, P. A. Cundall, (2004), A bonded-particle model for rock, Int. J. Rock Mech. Min. Sci., 41 (8), 1329-1364, doi: 10.1016/j.ijrmms.2004.09.011.
76. Ramsay, J. G., (1980), The crack-seal mechanism of rock deformation, Nature, 284 (5752), 135-139, doi: 10.1038/284135a0.
77. Ramsay, J. G., and, M. I. Huber, (1983), The Techniques of Modern Structural Geology: Strain Analysis, Academic Press, New York.
78. Schöpfer, M. P. J., and, C. Childs, (2013), The orientation and dilatancy of shear bands in a bonded particle model for rock, Int. J. Rock Mech. Min. Sci., 57, 75-88, doi: 10.1016/j.ijrmms.2012.07.019.
79. Schöpfer, M. P. J., C. Childs, and, J. J. Walsh, (2007), Two-dimensional distinct element modeling of the structure and growth of normal faults in multilayer sequences: 1. Model calibration, boundary conditions, and selected results, J. Geophys. Res., 112, B10401, doi: 10.1029/2006JB004902.
80. Schöpfer, M. P. J., S. Abe, C. Childs, and, J. J. Walsh, (2009), The impact of porosity and crack density on the elasticity, strength and friction of cohesive granular materials: Insights from DEM modelling, Int. J. Rock Mech. Min. Sci., 46 (2), 250-261, doi: 10.1016/j.ijrmms.2008.03.009.
81. Schöpfer, M. P. J., A. Arslan, J. J. Walsh, and, C. Childs, (2011), Reconciliation of contrasting theories for fracture spacing in layered rocks, J. Struct. Geol., 33 (4), 551-565, doi: 10.1016/j.jsg.2011.01.008.
82. Sekine, K., and, K. Hayashi, (2009), Residual stress measurements on a quartz vein: A constraint on paleostress magnitude, J. Geophys. Res., 114, B01404, doi: 10.1029/2007JB005295.
83. Sendeckyj, G. P., (1970), Elastic inclusion problems in plane elastostatics, Int. J. Solids Struct., 6 (12), 1535-1543, doi: 10.1016/0020-7683(70)90062-4.
84. Thiercelin, M., J. C. Roegiers, T. J. Boone, and, A. R. Ingraffea, (1987), An investigation of the material parameters that govern the behavior of fractures approaching rock interfaces, in 6th ISRM Congress.
85. Thornton, C., (2000), Numerical simulations of deviatoric shear deformation of granular media, Géotechnique, 50 (1), 43-53, doi: 10.1680/geot.2000.50.1.43.
86. Urai, J. L., and, P. F. Williams, (1991), Kinematics of crystal growth in syntectonic fibrous veins, J. Struct. Geol., 13, 823-836.
87. Vass, A., D. Koehn, R. Toussaint, I. Ghani, and, S. Piazolo, (2014), The importance of fracture-healing on the deformation of fluid-filled layered systems, J. Struct. Geol., 67, Part A, 94-106, doi: 10.1016/j.jsg.2014.07.007.
88. Virgo, S., S. Abe, and, J. L. Urai, (2013a), Extension fracture propagation in rocks with veins: Insight into the crack-seal process using Discrete Element Method modeling, J. Geophys. Res. Solid Earth, 118, 5236-5251, doi: 10.1002/2013JB010540.
89. Virgo, S., M. Arndt, Z. Sobisch, and, J. L. Urai, (2013b), Development of fault and vein networks in a carbonate sequence near Hayl al-Shaz, Oman Mountains: GeoArabia, J. Middle East Pet. Geosci., 18 (2), 99-136.
90. Walderhaug, O., (1994), Precipitation rates for quartz cement in sandstones determined by fluid-inclusion microthermometry and temperature-history modeling, J. Sediment. Res., 64 (2), 324-333.
91. Wang, Y., and, F. Tonon, (2009), Modeling Lac du Bonnet granite using a discrete element model, Int. J. Rock Mech. Min. Sci., 46 (7), 1124-1135, doi: 10.1016/j.ijrmms.2009.05.008.
92. Wang, Y., S. Abe, S. Latham, and, P. Mora, (2006), Implementation of particle-scale rotation in the 3-D Lattice Solid Model, Pure Appl. Geophys., 163 (9), 1769-1785, doi: 10.1007/s00024-006-0096-0.
93. Wüstefeld, P., (2010), Capturing a world-class outcrop of a quality calcite vein network on a polished limestone outcrop in the Oman Mountains: Creation of a high resolution panorama and microstructural vein description: OPUS3-IDN/3618.
94. Yoon, J. S., A. Zang, and, O. Stephansson, (2012), Simulating fracture and friction of Aue granite under confined asymmetric compressive test using clumped particle model, Int. J. Rock Mech. Min. Sci., 49, 68-83, doi: 10.1016/j.ijrmms.2011.11.004.